Images folder in Robohelp 7 project only lists a small fraction of the images actually there

I added an image to a topic. The image had an identical name to an existing image in the project. The image appeared in my main project folder, which is where all images initially show up in my project. I then move them to an images folder. I moved this image, expecting to get a message asking if I wanted to replace the exsting image with the same name. i wanted to update all instances where this image appears. Instead I got a message that this file was in use and could not be replaced. I clicked on my images folder to see if the original image was in a topic that was open and maybe that was why it would not overwrite. At this point i noticed most of the images in the folder were not listed.
I can use Reports Used and I see all the files that are supposed to be in my images folder, but when I go to the Images Reports tab, only the files that are listed in my images folder in the Project Manager are shown. So Robohelp knows the files are in the images folder and that they are in use, but it does not recognize them as images and will not list them as such.
i have no idea how this happened or how to fix it.

If RoboHelp allowed you to replace the image and it were a different size, you could have problems in the existing topics. I suspect that is why it is not allowed to replace it in that way.
As far as "missing" images are concerned, try renaming the folder to say Images2. They will likely all appear and then you can revert the name.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

Similar Messages

Is it possible to work only on a small part of the image in FCP ?

Hello,
I"m working on a DV film that I have made this winter, but on the original film, the image (video) is a lot darker on both top corners (I have some problems with my camera when I use it outside during the winter).
Is there any way to work only on a part of the image with a filter, instead of working on the whole image. I would like to work on thoses 2 darker spot without touching the rest of the image.
Thanks

What you need to do is color correct just those two portions of the image. In a DaVinci and Final Touch this is called using "power windows." Now, you can do this one of two ways.
1) Layer the same clip on the timeline 3 times. V1, V2 and V3. Same start and end time on all clips. Now, use the 4-point garbage matte on the clips on the upper layers to isolate those sections and then apply the 3-way color corrector to brighten the images.
2) Colorista by Red Giant Software (www.redgiantsoftware.com) is a $200 color correction filter that allows you to layer color correction and isolate specific areas...using POWER WINDOWS in effect.
Shane

I recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.

i recently upgraded my 4s to a 5s. the verizon store took my old phone for a trade in. i cannot get any of my pictures to download from icloud. my photo stream folder only has a small percentage of the photos in it. any help would be greatly appreciated.

That's possible if he didn't connect to a WiFi hotspot after taking them. I don't think the "Personal" Photo Stream uploads over Cellular, unless they changed it since the last time I used it.
If that's the case, then the photos likely didn't upload to Photo Stream and are stuck on the phone.
And you're not going to be able to get them back, either.

I am using a MacPro running OS 10.6.8. When saving an image in PS CC I no longer have a thumbnail of the image in my folder , just a generic PS symbol thumbprint. What do I do to get my image thumbnail back?

I am using a MacPro running OS 10.6.8. When saving an image in PS CC I no longer have a thumbnail of the image in my folder , just a generic PS symbol thumbprint. What do I do to get my image thumbnail back?
Adobe Creative Cloud

Photoshop CC needs at least OSX 10.7-10.9
You may be able to install and run it on 10.6.8, but as I understand it the rules for generating thumbnails has changed with Apple and CC writes them to suit the required OSX.
Photoshop CS6 will always give you image thumbnails but CC and CC 2014 have had thumbnails generated differently for the required OSX.
You will have to upgrade to 10.7,10.8, or 10.9
My file saving preferences are set like this:

I have a new 160GB iPod Classic. I often listen to it for many hours at a time. Even with Itunes and the Classic set on shuffle it repeats songs often and only plays a small fraction of my songs. Help! of my

When listening for hours to my new Clasic 160 with several thousand songs and both itunes and the Classic set to shuffle all songs it only plays a small fraction of my library and plays many songs several times over that period. It also seems to pick a small different group of songs to repeat without touching many of most of my songs each time I start listening. Over 98% of the music is legally owned in my CD collection. A few are down loads which play! There should be no issues with ownership. Please help. As much as I like all my tunes I want to actually hear them all. There are many many albums that have never been played.

Okay, well we've eliminated a couple of things.
One thing I have noticed about the iPod Classic: I suspect that "shuffle" is actually a Playlist, not a real shuffle. The Classic is not as powerful as iTunes or a desktop/computer, so it cannot truely "shuffle songs". I suspect what happens is that every Sync of the Classic with its iTunes Library causes a revised "shuffle playlist" to be put on the iPod and then, when you choose Shuffle play, it actually uses that special hidden "shuffle playlist".
So one trick is to Sync your iPod with iTunes frequently. This would change the "shuffle playlist". Another trick would be to create your own Playlists, either by adding what you want to a Regular Playlist or by creating a Smart Playlist which adds and removes songs by itself.
Smart Playlists: for example, you can create a Smart Playlist (in iTunes) which contains a random selection of all songs, or a random selection of a particular group of songs, provided the song has not been played for a period of time, say six months, or 300 days. Every Sync of the iPod with iTunes would remove any song from that Smart Playlist if it has been played. That same song cannot go back into the Playlist for a period of six months, or whatever you choose.
This way, you can reduce the likelyhood of hearing the same songs too often. This brings me to another point. If you have the same song, on different albums, then it's possible that you are hearing that same song but from both albums.
Try this: in your iTunes Library,
look for and click on the big + button and choose New Smart Playlist..., if you do not have the Sidebar displayed, switch to the Playlists view where you will find it in the bottom left corner,
Set it up to look like this:
It creates a list of songs that have not been played for fifteen weeks. It excludes videos and in my iTunes Library, it has 527 songs in it. If you would like a smaller list than that, click on the Limit to and fill in the number of songs you want.
Having set it up, play some songs from it (in shuffle mode if you wish) and watch how it changes . The song must play through to the end of the track before it is classed as "played". If you like it, let it go onto your iPod. You could set up a few Playlists, each with their own rules. Even if a song appears in two different Smart Playlists, if you have the "last played is not in the last" rule in both lists, then playing the song will eliminate it from both lists. None of this removes songs from the iPod (unless you use Sync selected Playlists...).

How do i disable the open/save image dialog box in firefox? I want to directly save the image file to the drive.

How do i disable the open/save image dialog box in firefox? I want to directly save the image file to the drive without clicking on save option everytime when saving an image. I'm using firefox ver 35.0.1 for windows 7.

Click on the Firefox menu. Then click "Options". Go to "Applications" tab. Search for jpg and png file type. You will find they have "Always ask" action attribute. Change it to "Save file".
Hope it will work fine for you.

Script to "Reset size" for all images in a RoboHelp project

New UI. Quick fix to pull new screenshots is hampered by the size constraints of graphics.
Is there a (third party or built in) script that will reset size for all the images in a RoboHelp HTML project?
RH8, RoboHelpHTML bulished as WebHelp.
PS the filter in Adobe Forums doesn't allow me to limit the search to RoboHelp HTML and WebHelp; I don't have any other Adobe products, so all the hits don't apply.

Thanks for this script!
What needs to be done to convert a .jsx into an .exe executable that I can add to the RH Toolbox (pod) and run it in a project on my terms, rather than import into the project so it runs (whenever I compile?)
What is the ReSize tool for that already exists in the toolbox?

Encore CS3 crash when i click Build (SWF, BluRay, DVD Burn/Image/Folder) or Check project

So I'm finally done with my DVD. Now i want this burned to a dvd or make an image file. Each time i hit BUILD or START (Check proj) the program quits and I'm left with the normal OS X message: The application Adobe Encore quit unexpectedly >> Ignore - Report... - Relaunch
My DVD is not that fancy but i got a menu with 3 buttons made in PS with a pointer highlight and a animating background made in After Effects (using dynamic link) with some music. All of the buttons link to After effects comps with dynamic link. All of the after effects compositions are transcoded and works within the DVD preview (except the DVD menu background wont play, and i got a feeling it will play when i export an image or DVD). And all the After Effects comps links back 2 the menu when done. So there should be no error in the project flowchart.
My flowchart: http://www3.sqr.no/index.php/get/64a267e640fddd15128d082abb72e3d92a3aedf680aabe20995beb7e e10ae32f
(small jpg file)
So i hit build and Encore quits, shut down, finada (Every time!). No matter what out put settings i use. I've exported DVD's from encore before on this computer without problems.
---I got this error report---
Process: Adobe Encore [11321]
Path: /Applications/Adobe Encore CS3/Adobe Encore CS3.app/Contents/MacOS/Adobe Encore
Identifier: com.adobe.Encore
Version: ??? (3.0.2)
Code Type: X86 (Native)
Parent Process: launchd [188]
Date/Time: 2008-08-05 18:36:00.739 +0100
OS Version: Mac OS X 10.5.4 (9E17)
Report Version: 6
Exception Type: EXC_BAD_ACCESS (SIGBUS)
Exception Codes: KERN_PROTECTION_FAILURE at 0x0000000000000000
Crashed Thread: 0
Here is the rest of the error report: (rtf document)
http://www3.sqr.no/index.php/get/a4568b7ade16f18d2acf09891b81b0bc7c0e4936287eebf2a509470d4 c7098fb
Don't know if this any help but hope anybody got some ideas. I've been trying to look for a solution on the forums, but without any luck.
By the way, I'm using a Mac Pro v3,1 (early 2008) with 2 x 2,8ghz quads, 10GB memory, NVIDIA GeForce 8800 GT (512mb) and plenty of disk space.

Hey, i think if there could be any of the possibilities you talk about, it might have been a naming error. All files i created had the same name in the new project as in the old one. But i used 1 asset arrow that i copy pasted from a library button "Red facets button" and shift pasted on my own buttons as highlight (paste sub picture). In the first project i did not do this as a straight forward thing, a lot of deleting and adding because i had never done it before and there might have happened something with the naming of the arrow i pasted. I used the same arrow in the second project but without messing with delete, paste all the time. But some how there is no problems now, just something wrong with the last project file =S
Not so important:
I also noticed while building the new project i once got an "General error", not sure why but happened after a random crash. And 2 get rid of it i had to delete the menu and make it again (i could not edit anything in the menu without getting the error). I rebuild the menu and had another crash when exiting the program, because i thought my computer needs to boot after 2 days online. When i reopened the project i got "General error" in the menu again, but after some clicking it didn't show up (random). Finally i got my project setup and everything works, i did the copy past as sub picture as a straight forward thing.

Flex Mobile Project only lists "Google Android" in Target Platforms

I just downloaded the masters colection cs5.5 and im am using FlashBuilder 4.5. When I create a new Flex Mobile Project, only Google Android is a target platform. I don't see Blackberry or iOS as options.
I do see Apple iOS when I create a mobile ActionScript project.
This must be due to a configuration setting. Can anyone help?
i have already looked at this peron post and i have tryed all of the sollutions and none of them seem to work http://forums.adobe.com/thread/867857

That didn't help me either. Ultimately, here's what I did.
I uninstalled and reinstalled the software
After it was reinstalled, I updated to the 4.5.1 SDK PRIOR to doing any other software update.
Then I updated the Software
The software update found all new items and installed them properly (which is what I believe the issue is -- if you update prior to using the 4.5.1 SDK it doesn't install the required bits).
Now it seems to be working for me.
Not sure if that's the problem, but that's how I fixed it.

Can I publish my RoboHelp project directly to a web server using the Generate Primary Layout (WebHelp) function?

I am hoping to improve my method of publishing my company
Knowledge Base.
Currently, I generate the RoboHelp layout to a folder on my
local computer and then manually upload the project output files to
our sever via SmartFTP. My question is how do I publish directly to
the server? Is this possible?
On the first page of the Generate Primary Layout "wizard", I
have entered the path to a local folder on my computer. Three
screens later in the Servers box of the "wizard", I have entered a
server and path, and checked its box. When I generated the output,
I expected it to be published to both locations: the local folder
and the web server folder. But it only publishes to the local
folder, not the web server.
How do I get it publish to the server also?
Any help is much appreciated. Thanks!
~Beth

I had been using the HTTP setting, so switched to FTP and
filled in server info. This time the Publish function began
working! However, the process has since hit a snafu.
Certain files are causing errors and I'm getting a message
such as this one:
Publishing has been cancelled. Failed to create file: image
235.jpg
When I click OK to the first error message, I then get this
one:
Publishing has been cancelled. Failed to create file:
bsscftp.txt
After clicking OK to the 2nd error msg, the Publish fails and
I get this:
Warning: Failed to publish to "help". reason: Canceled by
user.
I have run through the Publish a couple times now and various
files cause the 1st error, but the 2nd file is always that same txt
file. I realize this snafu may be particular to my situation but
any ideas?

Error message while opening a project: "an error was encountered while loading the image"

We've run into a new error message here today:
an error was encountered while loading the image
It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
It's on a windows 7-machine.
Anyone encountered it and knows what it means?
is the project lost forever?

Hi there
Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
Best of luck to you in sorting things. You should also consider filing a Bug Report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Add scanned pages to my iMovie project. No matter what I do the images are crummy! Ideas?

I use iMovies for presentations. When adding picutes or slides. What is the correct size of the "frame' in iMovies. Sometimes the images need to be "scaled".
Is there a easier way to get them to fit?
I also would like to add text pages (printed forms). Any scan or file type becomes very poor quality??! Tiffs, PDFs, high res scans all look pixelated or blurry??

Click on the project, but don't enter it. Then go into file or edit (can't remember) and find:
Move Project to Trash.
I don't have that version of iMovie so if that doesn't work, sorry.

How can I select only a small part of the image to clone or edit etc?

I want to select part of the image to clone is, and just edit the selected part. I know i can do this on photoshop but how do i do it on Aperture?

You use the "Retouche" brush in Aperture and set it to "clone".
Option-Click on the location you want to clone from to select a source, and then brush over the location where you want to clone to. The cloned region will follow the shape of the brushed area. You do not lasso the shape to to copy and paste it like in Photoshop.
For example: Duplicating a penguin: The sourcepoint has been set to the beak of the second penguin, and then I brushed along the path where I want to penguin clone to appear.
If I brush the whole area eventually the penguin will be copied completely. You'll have to experiment a bit with the brush size and softnees to ensure that the cloned object will blend in.
Regards
Léonie

How to load images in List from Xml and view the image and resize the image & save in Flex?

Hi Friends,
I am new to flex i am doing application for image resizing rotating and save the resize image.
I want to load the images from xml file to listcontrol and show that images as a icon in the listview,then i want to drag that image to panel that time it should show it original size of the Image.then it allows user to resize ,crop,rotate the image.then i want to save the resize image,when i save the resize image it should replace the original image in the xmllist.
I am looking for some useful suggession ,if you dont mind want to see some snippet code.
It will help me to understand the concept.
Cheers,
B.Venkatesan

Not in Crystal Reports Basic for Visual Studio 2008. You'll have to upgrade to CR 2008 (12.x). Then use kbase [1320507|http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_erq/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes.do] as a guide on how to do this.
Ludek

Some of the images are not showing up on my Blogger blog even though the HTML is there. They do show up in Opera.

Here is the link to the blog post -
http://happyholidays-blog.blogspot.com/2010/09/welcome-to-trick-or-treat-street.html
Three days ago I went to a post from last year and an image was gone. The code was there but not the image.
It doesn't get rid of all the images just certain ones and they are consistently gone. It is not a random deletion of images.
I have had images not show up on other blogger sites.

See http://kb.mozillazine.org/Images_or_animations_do_not_load
It is possible that you clicked "Block Images" in the right click context menu while trying to save an image.
Check the image exceptions: Tools > Options > Content: Load Images: Exceptions 
See [[Options window - Content panel]]
*A way to see which images are blocked is to click the favicon (Site Identification icon) on the left side of the location bar.
*A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").
*Open the Media tab of the "Page Info" window.
*Select the first image and scroll down though the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "Block Images from..." then remove that mark to unblock the images from that domain.

Images folder in Robohelp 7 project only lists a small fraction of the images actually there

Similar Messages

Maybe you are looking for