Imaging Dell Venue Pro 5130s

i'm working on imaging dell venue Pros 5130s. I believe I have everything set up correctly (i'm imaging on a dock) . I get the Checking Media... ipv4 screen that goes past to the ipv6 screen and hangs. i'm on sccm 2012 r2. can u
point me to some logs to check? or have advice?
thanks

just getting back to this. below is my smsts.log. I have not added any extra drivers to my boot image yet.
<![LOG[LOGGING: Finalize process ID set to 768]LOG]!><time="19:06:20.963+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772" file="tslogging.cpp:1495">
<![LOG[==============================[ TSBootShell.exe ]==============================]LOG]!><time="19:06:20.963+480" date="10-06-2014" component="TSBootShell" context="" type="1"
thread="772" file="bootshell.cpp:1055">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="19:06:20.963+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772"
file="util.cpp:964">
<![LOG[Debug shell is enabled]LOG]!><time="19:06:20.963+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772" file="bootshell.cpp:1066">
<![LOG[Waiting for PNP initialization...]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:60">
<![LOG[RAM Disk Boot Path: NET(0)\SMSIMAGES\BOE0002E\BOOT.BOE0002E.WIM]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776"
file="configpath.cpp:302">
<![LOG[Booted from network (PXE)]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="configpath.cpp:317">
<![LOG[Network(PXE) path: X:\sms\data\]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="configpath.cpp:319">
<![LOG[Found config path X:\sms\data\]LOG]!><time="19:06:20.978+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:548">
<![LOG[Booting from removable media, not restoring bootloaders on hard drive]LOG]!><time="19:06:20.994+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776"
file="bootshell.cpp:582">
<![LOG[X:\sms\data\WinPE does not exist.]LOG]!><time="19:06:20.994+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:599">
<![LOG[X:\_SmsTsWinPE\WinPE does not exist.]LOG]!><time="19:06:20.994+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:613">
<![LOG[Executing command line: wpeinit.exe -winpe]LOG]!><time="19:06:21.291+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="19:06:31.374+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:942">
<![LOG[Starting DNS client service.]LOG]!><time="19:06:31.374+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:666">
<![LOG[Executing command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="19:06:31.909+480" date="10-06-2014" component="TSBootShell" context=""
type="1" thread="776" file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="19:06:31.909+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:942">
<![LOG[==============================[ TSMBootStrap.exe ]==============================]LOG]!><time="19:06:32.049+480" date="10-06-2014" component="TSMBootstrap" context="" type="1"
thread="1096" file="tsmbootstrap.cpp:1165">
<![LOG[Command line: X:\sms\bin\i386\TsmBootstrap.exe /env:WinPE /configpath:X:\sms\data\]LOG]!><time="19:06:32.049+480" date="10-06-2014" component="TSMBootstrap" context="" type="0"
thread="1096" file="tsmbootstrap.cpp:1166">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\1033\TSRES.DLL']LOG]!><time="19:06:32.049+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096"
file="util.cpp:964">
<![LOG[Succeeded loading resource DLL 'X:\sms\bin\i386\TSRESNLC.DLL']LOG]!><time="19:06:32.065+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096"
file="resourceutils.cpp:169">
<![LOG[Current OS version is 6.2.9200.0]LOG]!><time="19:06:32.065+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096" file="util.cpp:3094">
<![LOG[Adding SMS bin folder "X:\sms\bin\i386" to the system environment PATH]LOG]!><time="19:06:32.065+480" date="10-06-2014" component="TSMBootstrap" context="" type="0"
thread="1096" file="tsmbootstrap.cpp:963">
<![LOG[PXE Boot with Root = X:\]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096" file="tsmbootstrap.cpp:1062">
<![LOG[Executing from PXE in WinPE]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSMBootstrap" context="" type="1" thread="1096" file="tsmbootstrap.cpp:1077">
<![LOG[Loading TsPxe.dll from X:\sms\bin\i386\TsPxe.dll]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSMBootstrap" context="" type="0" thread="1096"
file="tsmbootstraputil.cpp:1363">
<![LOG[TsPxe.dll loaded]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tsmbootstraputil.cpp:1373">
<![LOG[Device has PXE booted]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tspxe.cpp:122">
<![LOG[Variable Path: \SMSTemp\2014.10.06.14.27.40.0004.{CFC8720C-E1D8-4E8B-867D-E7A4ED8A7F21}.boot.var]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSPxe" context=""
type="0" thread="1096" file="tspxe.cpp:134">
<![LOG[Variable Key Len: 69]LOG]!><time="19:06:32.081+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tspxe.cpp:141">
<![LOG[Succesfully added firewall rule for Tftp]LOG]!><time="19:06:32.096+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="fwopen.cpp:123">
<![LOG[Executing: X:\sms\bin\i386\smstftp.exe -i 10.3.1.178 get \SMSTemp\2014.10.06.14.27.40.0004.{CFC8720C-E1D8-4E8B-867D-E7A4ED8A7F21}.boot.var X:\sms\data\variables.dat]LOG]!
><time="19:06:32.096+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tspxe.cpp:177">
<![LOG[Command line for extension .exe is "%1" %*]LOG]!><time="19:06:32.284+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="commandline.cpp:228">
<![LOG[Set command line: "X:\sms\bin\i386\smstftp.exe" -i 10.3.1.178 get \SMSTemp\2014.10.06.14.27.40.0004.{CFC8720C-E1D8-4E8B-867D-E7A4ED8A7F21}.boot.var X:\sms\data
\variables.dat]LOG]!><time="19:06:32.284+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="commandline.cpp:731">
<![LOG[Executing command line: "X:\sms\bin\i386\smstftp.exe" -i 10.3.1.178 get \SMSTemp\2014.10.06.14.27.40.0004.{CFC8720C-E1D8-4E8B-867D-E7A4ED8A7F21}.boot.var X:\sms\data
\variables.dat]LOG]!><time="19:06:32.284+480" date="10-06-2014" component="TSPxe" context="" type="1" thread="1096" file="commandline.cpp:827">
<![LOG[Executing command line: X:\WINDOWS\system32\cmd.exe /k]LOG]!><time="19:06:34.084+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772"
file="bootshell.cpp:860">
<![LOG[The command completed successfully.]LOG]!><time="19:06:34.084+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772" file="bootshell.cpp:942">
<![LOG[Successfully launched command shell.]LOG]!><time="19:06:34.084+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="772" file="bootshell.cpp:432">
<![LOG[Process completed with exit code 1]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="1" thread="1096" file="commandline.cpp:1123">
<![LOG[Succesfully removed firewall rule for Tftp]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="fwopen.cpp:146">
<![LOG[uExitCode == 0, HRESULT=80004005 (e:\nts_sccm_release\sms\server\pxe\tspxe\tspxe.cpp,185)]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="0"
thread="1096" file="tspxe.cpp:185">
<![LOG[Failed to download pxe variable file. Code(0x00000001)]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="3" thread="1096"
file="tspxe.cpp:185">
<![LOG[PxeGetPxeData failed with 0x80004005]LOG]!><time="19:07:19.474+480" date="10-06-2014" component="TSPxe" context="" type="3" thread="1096" file="tsmbootstraputil.cpp:1458">
<![LOG[HRESULT_FROM_WIN32(dwError), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstraputil.cpp,1459)]LOG]!><time="19:07:19.474+480" date="10-06-
2014" component="TSPxe" context="" type="0" thread="1096" file="tsmbootstraputil.cpp:1459">
<![LOG[TSMBootstrapUtil::PxeGetPxeData(&bPxeBooted, sVariablesFile, sPxePasswd), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap
\tsmediawizardcontrol.cpp,2667)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tsmediawizardcontrol.cpp:2667">
<![LOG[oTSMediaWizardControl.Run( sMediaRoot, true, sTSLaunchMode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmbootstrap.cpp,1078)]LOG]!
><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tsmbootstrap.cpp:1078">
<![LOG[Execute( eExecutionEnv, sConfigPath, sTSXMLFile, uBootCount, &uExitCode ), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap
\tsmbootstrap.cpp,1226)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0" thread="1096" file="tsmbootstrap.cpp:1226">
<![LOG[Exiting with return code 0x80004005]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="1" thread="1096" file="tsmbootstrap.cpp:1238">
<![LOG[hMap != 0, HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0"
thread="1096" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context=""
type="0" thread="1096" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\qfe\nts\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSPxe" context="" type="0"
thread="1096" file="environmentlib.cpp:553">
<![LOG[Execution complete.]LOG]!><time="19:07:19.489+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:693">
<![LOG[hMap != 0, HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentscope.cpp,493)]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell"
context="" type="0" thread="776" file="environmentscope.cpp:493">
<![LOG[m_pGlobalScope->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,335)]LOG]!><time="19:07:19.505+480" date="10-06-2014"
component="TSBootShell" context="" type="0" thread="776" file="environmentlib.cpp:335">
<![LOG[this->open(), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\environmentlib.cpp,553)]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell"
context="" type="0" thread="776" file="environmentlib.cpp:553">
<![LOG[::RegOpenKeyExW (HKEY_LOCAL_MACHINE, sKey.c_str(), 0, KEY_READ, &hSubKey), HRESULT=80070002 (e:\nts_sccm_release\sms\framework\tscore\utils.cpp,809)]LOG]!
><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="0" thread="776" file="utils.cpp:809">
<![LOG[RegOpenKeyExW is unsuccessful for Software\Microsoft\SMS\Task Sequence]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="2" thread="776"
file="utils.cpp:809">
<![LOG[GetTsRegValue() is unsuccessful. 0x80070002.]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="2" thread="776" file="utils.cpp:842">
<![LOG[End program: ]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="bootshell.cpp:725">
<![LOG[Finalizing logging from process 768]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="tslogging.cpp:1741">
<![LOG[Finalizing logs to root of first available drive]LOG]!><time="19:07:19.505+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776"
file="tslogging.cpp:1583">
<![LOG[Successfully finalized logs to C:\SMSTSLog]LOG]!><time="19:07:19.512+480" date="10-06-2014" component="TSBootShell" context="" type="1" thread="776" file="tslogging.cpp:1640">
<![LOG[Cleaning up task sequencing logging configuration.]LOG]!><time="19:07:19.512+480" date="10-06-2014" component="TSBootShell" context="" type="0" thread="776"
file="tslogging.cpp:584">

Similar Messages

Delete key in on screen keyboard for Dell Venue Pro 8 tablet?

Using Windows 8.1 on a Dell Venue Pro 8 tablet. The software, onscreen keyboard does not have a Delete key. That makes it very hard to do any editing after highlighting a block of text. Hitting the backspace key takes it out of the block edit mode and
just deletes on letter at a time. Anyone know if this is a general Windows tablet problem or possibly some unique to the Dell Venu Pro 8 tablet? I would like to change the keyboard layout to include the Delete key. Also, is there setting so it could recognize
when to capitalize a word? I would think that my Sumsung phone would not have a better software keyboard, but it has a much, much better version in SwiftKey.

I guess you mean the "touch keyboard" ?
There is a "keyboard selector" key in the bottom right hand corner, which allows you to select alternative layouts - have you tried that?
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Windows 8.1 randomly freezes and restarts on Dell Venue Pro 11

I have a new Dell Venue Pro 11 with Windows 8.1. It freezes at random times -- on random processes (music, firefox, etc.) -- goes to the BSOD and into a restart. Happens a few random times-- a day; no pattern. Looking through the answers to related
questions seems it comes down to hardware problem (new machine) or reinstall the OS. Correct?

Hi,
To identify your issue, would you please help to post back the minidump file for our research?
Please upload them to a file sharing service like Onedrive or "Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled, refer to the step “Configure the dump type” in following article:
How to read the small memory dump file that is created by Windows if a crash occurs
http://support.microsoft.com/kb/315263#method2
Kate Li
TechNet Community Support

PDF files and the Dell Venue Pro

If I have the Dell Venue Pro can I sign a PDF document which has a signature field inserted into it?

Post your problem in the forum for Acrobat SDK.

Installation Problem - Skype for Desktop on Dell Venue Pro 8

I have a new Dell Venue Pro 8. It had the modern Skype app installed out of the factory, but clicking on it made me download the Skype for desktop app. It downloads fine (in looking through the forums, I saw that others had problems with this, but it was fine for me). The problem comes when it's installing. Skype brings up the "Installing Skype" window. The problem is that it takes up the whole screen. I can do what I need to with the "Select your language" drop-down menu, but there is nothing that lets me go to the next screen. I see no "Next" or "OK" or anything like that to use to continue the installation process. I cannot resize the window. Maximize and minimize are the only options. "Move" and "resize" are grayed out. Thank you for any ideas!

Try to install the currently latest Skype 7.7.0.102 version using this installer: http://download.skype.com/msi/SkypeSetup_7.7.0.102.msi

Projector works on Dell Venue Pro 11 tablet?

Hi there
I am trying to run a director 11.5 windows projector (made on a mac) on Dell Venue 11 Pro tablet (win 8.1/1920x1080/baytrail CPU) and am having problems with "alignment" on the screen. The 1920x1080 movie seems to be loading but fills only about 60% of the screen. You can see the desktop through the other 40%. It appears that the movie (at normal size) has been shifted up by 250 pixels and to the left by 400 pixels and is playing. So you are seeing the desktop through lower "SW" portion of the screen.
This particular movie ran fine on a microsoft surface pro tablet a few months ago (no access to that projector file, I republsihed). Unfortuntately I do not have access to that surface tablet anymore. I am wondering if there is a problem with the integrated graphics hardware and/or the processor in the dell. The venue has the new baytrail processor and integrated intel graphics. The surface pro has an i5 processor.
Thanks in advance for any help.
AK

Made some other windows projectors (on the mac) with the following results and run on the dell venue tablet.
(1) 1600x900 - similar problem with only part of screen showing
(2) 1280x720 - projector seems to be working and displaying properly. The projector image is scaled to fill the full 1920 screen width.
I am beginning to think that there is a problem with the intel integrated graphics hardware. I should add that the problem I am having also occured a few months ago when I tested a similar projector with a acer iconia w3 tablet (8 inch screen/windows 8.0/1280x800/atom Z2760 CPU/intel Graphics Media Accelerator HD hardware).
I hope that problem has a solution, hopefully coming as a director 11.6 upgrade and director 12.1 upgrade. I think this combination of cpu and graphics hardware is a going to do pretty good business.

Skype on Dell Venue Pro 8

I have a tablet Dell Venue 8 Pro. it defaults to the rear camara. I tried installing a new version, changing camaras, nothing works. I didn't have this problem 5 months ago. It just started this month. The only use I have for this tables is skype ( as I'm very iliterate when it comes to computers ) Please help, how can I change so I can have a face to face conversation. ( why this happen? anyone knows?)Thanks

Try to install the currently latest Skype 7.7.0.102 version using this installer: http://download.skype.com/msi/SkypeSetup_7.7.0.102.msi

Blackberry Desktop on Dell Venue Pro 8 Tablet Questions

I have read that it is possible to use Blackberry Desktop with Windows 8 & 8.1. And I have read that Blackberry Desktop works with any version of Outlook other than 2013. I have been told by Microsoft that I can install any version of Outlook older than 2013 onto a Windows 8 or 8.1 device. HAS anyone out there done this. I really like my Torch 9800 and wish to be able to use it with the new Dell tablet. OR does anyone have any other inexpensive tablet ideas.

Hello,
Some clarifications to resolve what you "have been told" versus what is accurate...
FlyHolst wrote:
I have read that it is possible to use Blackberry Desktop with Windows 8 & 8.1.
http://us.blackberry.com/software/desktop/desktop-pc/system-requirements.html
Note carefully that it states very clearly Windows 8...not 8.1
FlyHolst wrote:
And I have read that Blackberry Desktop works with any version of Outlook other than 2013.
KB12268 Synchronization support for BlackBerry Desktop Software for Windows
FlyHolst wrote:
I have been told by Microsoft that I can install any version of Outlook older than 2013 onto a Windows 8 or 8.1 device.
We can neither confirm nor deny what MS may or may not have told you.
FlyHolst wrote:
HAS anyone out there done this.
Not me...but perhaps someone else...then again...
FlyHolst wrote:
I really like my Torch 9800 and wish to be able to use it with the new Dell tablet. OR does anyone have any other inexpensive tablet ideas.
Please re-read the above system requirements page...I'm not at all sure that the Desktop Software is compatible with any tablet at all...but you need to compare your gear against what the Desktop Software supports.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Info Dell Venue Pro/ unlocked

Hi!
Have some questions:
1. Do you know if this phone can be used as hotspot (so I can have access to internet for other devices through this phone)?
2. I have a sim card from Mexico - telcel, here it uses at&t to have service, does this phone work with my sim card?
Thank you for your help!

Hi,
How about your problem now? Could your computer find other WIFI signal? If not, it is probably driver or hardware problem.
Firstly, please try to reinstall Wireless Card driver for test.
Secondly, if problem persists, you may need to contact Dell for further assistance.
Roger Lu
TechNet Community Support

Dell Venue Pro 11 w/Dock / Unable to concurrently use ethernet and wifi?

Does anyone know why you are unable to use the dock ethernet connection and the tablet's wifi connection at the same time?
I assume this is a limitation of the dock / tablet because if you hook a laptop up you can use the ethernet and wifi at the same time because they have different MAC addresses.
Thanks for any assistance you can provide....

Does anyone know why you are unable to use the dock ethernet connection and the tablet's wifi connection at the same time?
I assume this is a limitation of the dock / tablet because if you hook a laptop up you can use the ethernet and wifi at the same time because they have different MAC addresses.
Thanks for any assistance you can provide....

Where to find Model Number on Dell Venue Pro 11

I am trying to figure out if my tablet will support dual monitors but I need to find the model number (box was thrown away long time ago). Where can I find the model number?

Do you mean the model number or the serial number? Both are available in the "More Info" link within "About This Mac" (on the first tab, "Hardware"). You can also find the serial number under your battery.
Matt

Will Dell Venue 8 Pro work with photoshop?

I was think about buy Dell Venue 8 Pro, but I want to use photoshop CC as sketchbook on my new-to-be portable tablet. I want use it on the go and in bed...
I don't plan to use tablet as final look.
Will it work?
If you have used it.. How was it platform?
Because I already own firepro desktop that work very well with photoshop CC with too many layer.. ( and zbrush - up to 16 million polygon per sub-tool hee hee)
So I can finish off the job on desktop after tablet.

For those that find this post...yes, Photoshop CC does work extremely well on Dell Venue Pro 8. The only compromise is screen real estate--but aside from a few panel tweaks--everything is fine and surprisingly useable. We ran Adobe Photoshop CC 2014 on a DVP8 and compared it with a Mac Book Pro 2013--the DVP8 (32gig Version) was more responsive and extremely fast (though rendering required by After Effects not recommended DVP8). Make sure to get a Sandisk 64 MicroSDXC (http://amzn.to/1wtydtu)--and the tablet rocks. The programs I use frequently on Dell Venue 8 Pro are: Photoshop, Illustrator, Bridge, Indesign, Muse, Lightroom, Story, Audition and Media Encoder. While we have tried Premiere (projects and media on a USB 3.0 connected external)--some rendering processes were compromised--but not uneusable.

Dell Venue 11 Pro Camera/Video Issue

Hello All!I have some Dell Venue Pro 11 tablets running Windows 8.1. When I got them hooked up to our domain, I tried to take video and it was choppy. I realized that the camera roll was actually on one of our servers. Thererfore, there was a delay when retrieving the video from the server to the tablet. The solution was to move the camera roll to the C: drive on the device. And bam! It worked.Now I am encountering another problem: when I am not connected to a network or wifi, I open the camera app and get the message: We can't get to the camera roll right now, Something went wrong while accessing the camera roll. I cannot figure out why it would have a problem finding it if I have it locally stored on the C: drive under Public Desktop.If anyone can help with this, I would really appreciate it!John HeimIT Support TechBerks Counseling...
This topic first appeared in the Spiceworks Community

Does not appear they carry them at this time you may have better luck suggesting it here:
http://forums.bestbuy.com/t5/Best-Buy-IdeaX/idb-p/IdeaX/status-key/New
I am not affiliated with Best Buy nor have I ever been employed by Best Buy. All of my thoughts and posts are of my own opinion and personal experience.
I may not always know the right answer, but I will always tell you what I do know. I also do free computer analysis and consultation via private message.

OSD to Dell Venue 11 pro 5130 tablet

Hi,
I am setting up a deployment of Windows 8.1 x64 to Dell Venue 11 pro 5130 tablets from SCCM 2012 R2. I am docking the tablet and using the dock USB port to boot from a USB stick into the SCCM Boot Image. the image loads and allows me to select the operating
system for deployment and then begins the build process by trying to download the WinPE environment.
At this point I get an 0x0000007F error. on checking the logs I can find an entry relating to unable to find a volume that can be used for a bootable O/S. I have ran diskpart within WinPE and can see the disk, clean it, partition it etc. but still wont
work.
Looking for some pointers, I can build the device from USB with Windows 8.1 ISO.
Thanks

the Venue Pro 11 is a UEFI device and that means you'll need a UEFI capable task sequence (with uefi partitioning), in addition, if using USB media the boot image must match the architecture of the UEFI device, so if the device is 64 bit you must use a 64bit
boot image on the USB media,
in addition, the USB media must be formatted with Fat32 (which it will be if you use Configuration Manager to create the boot media) otherwise UEFI USB boot will not work.
Step by Step Configuration Manager Guides >
2012 Guides |
2007 Guides | I'm on Twitter > ncbrady

Dell Venue 11 Pro (5130 64Bit) BIOS update in WinPE 5.1 x64

I have encountered an issue while trying to upgrade BIOS on Dell Venue 11 Pro (5130 64Bit) in WinPE 5.1 (64-bit). To pre-empt any questions why not use BIOS update option available from boot menu: while it may be quite elegant solution for home use, it doesn't fit well in production environment where the action needs to be repeated hundreds of times, custom audit trail required and some other (automated) post-upgrade tasks need to happen.
After running the executable I receive the following error message:
The subsystem needed to support the image type is not present.
This would point to 32/64 bit application incompatibility and/or limitations of WinPE itself. I have following packages present in my image, as well as CCTK HAPI installed:
Feature Name
SMB1Protocol
WinPE-HTA
WinPE-WMI
WinPE-NetFx
Microsoft-Windows-NetFx-Shared-Package-WinPE
WinPE-PowerShell
WinPE-DismCmdlets
WinPE-SecureBootCmdlets
WinPE-SecureStartup
WinPE-TPM
WinPE-Scripting
WinPE-WDS-Tools
WinPE-EnhancedStorage
Unfortunately I cannot run the update from a "proper" copy of Windows as we need to upgrade BIOS for one of our customers without installing OS (we are shipping devices with default Dell preloaded version of Windows). The way I see it, before I am forced to go down the route of upgrading BIOS from boot menu, I have two options:
- Get a grip of what the exact issue is in x64 PE. Would anyone be able to help out here? Is this something I can fix by adding any components to my PE image?
- Try running update in x86 PE (I believe the executable is 32-bit despite "64bit" string in the name). Currently I can only boot using x64 image as BIOS is set to UEFI mode. I am reluctant to change boot mode to Legacy just to give it a go. Will I be able to safely go back to UEFI without any additional recovery work? I am not intending to change the contents of the HDD. Also will cctk be able to change boot mode back to UEFI automatically, or will I have to implement it as a manual step at the end of the process?
Due to other restrictions and time scales involved Windows To Go is not an option as well. Any help with this will be much appreciated.

The issue is that the subsystem required to support 32bit apps does not exist in the WinPE 64bit, and there is no way to add it. You'll either have to use WinPE 32bit, or update your BIOS after the OS has been installed. Other manufacturers provide x64 BIOS update executables, so I don't know why Dell can't get their act together and do the same.

Imaging Dell Venue Pro 5130s

Similar Messages

Maybe you are looking for