IMAQ image to array vi not working with images extracted from avi file

Hi,
I downloaded some avi's and uncompressed them so that I can analyze them within labview. I am trying to convert images I am reading from the avi file to an array. When I use "IMAQ image to array" I get the following error " IMAQ Image To Array Invalid image type" -1074396080.
I am able to display each read image and save them to the hard drive, but I am unable to convert the vision image to array. I verified that the image extracted from avi is the same as the image type I created in memory to hold the image.
Please see the attached vi I created.
thank you
Ruz
Attachments:
example2.vi ‏62 KB

Hi all, this thread was useful for me...but i have another doubt... when I try to extract a single plane (Luminance, Saturation, R,G,B...anyone) and try to save it in jpg as gray image, it saves an image with blue tones. I have examinated it using Matlab and checked that Red plane has low values (but not zero), the same for G plane and high values for B plane. An image of the VI is attached.
Thanks in advance
Attachments:
planes.png ‏28 KB

Similar Messages

Norton Login is not working with the upgrade from firefox. Not too happy about this

I upgraded to the new firefox. I have a lap top with vista windows.
Norton Login does not work with this version. Can you please explain to me how to fix this problem. Much preferred the last version of firefox.

You need an update from Norton, which Norton says will be ready in May.
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
You can get 3.6.16 from here: <br />
http://www.mozilla.com/en-US/firefox/all-older.html

DNG Profile Editor not working with new Profiles from LR 3.6?

I'm noticing that DNG Profile Editor is not really able to work with profiles from newly supported cameras, like the X10. Apparently the profile spec has been updated. Has DNG Profile Editor been abandoned or will it be updated to work with the new spec? I really hope it is!

Thanks. I am looking forward to editing the v4 profiles for the D700 - I just want to change a few colors in the existing profiles. I think the existing v4 profiles do an excellent job of matching the Nikon colors, but I don't like a few of the Nikon colors. Some colors have too much Red, but Red is too Orange.
I have selected a number of images that have colors I want to change. I selected the Camera Neutral (v0) and Camera Portrait (v0) and using the latest DNG Profile Editor I select the 18 colors from the Color Checker Chart. I then use the images that have the colors I want to change and determine which of the 18 points I selected from the Color Checker are close. I then edit those points - only 6 points. I only need to change the Hue by 5 units or less. I don't change any of the other selected points of the Color Checker, but feel that by selecting them I locked in the exisiting colors. Hope this is a good aproach.
I wish Nikon would do something equivalent to the DNG Profile Editor for their Picture Control profiles so they could be edited and loaded into the camera.

Gcc not working with compiled glibc from PKGBUILD

hello folks, please excuse my english
i like to compile certain parts of my system, between them are the kernel, glibc , zsh, etc.
i had noticed that using a compiled version of glibc from abs results in gcc not working at all ( C compiler cannot create executables logs says). this is weird especially because i hadn't had problems before, i have looked for the error mesagges on Google and a lot of people has had this problem but nobody has a "generic" solution for this
this is the config.log file from one failed compile of mpg123
This file contains any messages produced by compilers while
running configure, to aid debugging if configure makes a mistake.
It was created by mpg123 configure 1.12.3, which was
generated by GNU Autoconf 2.65. Invocation command line was
$ ./configure --prefix=/usr --with-audio=alsa esd sdl
## Platform. ##
hostname = Soul
uname -m = x86_64
uname -r = 2.6.34.1
uname -s = Linux
uname -v = #1 SMP PREEMPT Tue Jul 6 23:23:17 CLT 2010
/usr/bin/uname -p = unknown
/bin/uname -X = unknown
/bin/arch = x86_64
/usr/bin/arch -k = unknown
/usr/convex/getsysinfo = unknown
/usr/bin/hostinfo = unknown
/bin/machine = unknown
/usr/bin/oslevel = unknown
/bin/universe = unknown
PATH: /bin
PATH: /usr/bin
PATH: /usr/local/bin
PATH: /sbin
PATH: /usr/sbin
PATH: /usr/local/sbin
PATH: /usr/share/java/apache-ant/bin
PATH: /usr/lib/perl5/core_perl/bin
## Core tests. ##
configure:2849: checking build system type
configure:2863: result: x86_64-unknown-linux-gnu
configure:2883: checking host system type
configure:2896: result: x86_64-unknown-linux-gnu
configure:2933: checking for a BSD-compatible install
configure:3001: result: /bin/install -c
configure:3012: checking whether build environment is sane
configure:3062: result: yes
configure:3203: checking for a thread-safe mkdir -p
configure:3242: result: /bin/mkdir -p
configure:3255: checking for gawk
configure:3271: found /bin/gawk
configure:3282: result: gawk
configure:3293: checking whether make sets $(MAKE)
configure:3315: result: yes
configure:3402: checking for -Werror in CFLAGS (It breaks tests)
configure:3412: result: no
configure:3423: checking if you are up to something totally static with LDFLAGS/CFLAGS
configure:3443: result: no
configure:3463: checking for style of include used by make
configure:3491: result: GNU
configure:3561: checking for gcc
configure:3577: found /usr/bin/gcc
configure:3588: result: gcc
configure:3817: checking for C compiler version
configure:3826: gcc --version >&5
gcc (GCC) 4.5.1
Copyright (C) 2010 Free Software Foundation, Inc.
This is free software; see the source for copying conditions. There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
configure:3837: $? = 0
configure:3826: gcc -v >&5
Using built-in specs.
COLLECT_GCC=gcc
COLLECT_LTO_WRAPPER=/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/lto-wrapper
Target: x86_64-unknown-linux-gnu
Configured with: ../configure --prefix=/usr --enable-languages=c,c++,fortran,objc,obj-c++,ada --enable-shared --enable-threads=posix --enable-__cxa_atexit --enable-clocale=gnu --enable-gnu-unique-object --enable-lto --enable-plugin --disable-multilib --disable-libstdcxx-pch --with-system-zlib --with-ppl --with-cloog --libdir=/usr/lib --libexecdir=/usr/lib --mandir=/usr/share/man --infodir=/usr/share/info
Thread model: posix
gcc version 4.5.1 (GCC)
configure:3837: $? = 0
configure:3826: gcc -V >&5
gcc: '-V' option must have argument
configure:3837: $? = 1
configure:3826: gcc -qversion >&5
gcc: unrecognized option '-qversion'
gcc: no input files
configure:3837: $? = 1
configure:3857: checking whether the C compiler works
configure:3879: gcc -march=amdfam10 -O2 -pipe -Wl,--hash-style=gnu -Wl,--as-needed conftest.c >&5
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x12): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x19): undefined reference to `__libc_csu_init'
collect2: ld returned 1 exit status
configure:3883: $? = 1
configure:3921: result: no
configure: failed program was:
| /* confdefs.h */
| #define PACKAGE_NAME "mpg123"
| #define PACKAGE_TARNAME "mpg123"
| #define PACKAGE_VERSION "1.12.3"
| #define PACKAGE_STRING "mpg123 1.12.3"
| #define PACKAGE_BUGREPORT "[email protected]"
| #define PACKAGE_URL ""
| #define PACKAGE "mpg123"
| #define VERSION "1.12.3"
| /* end confdefs.h. */
|
| int
| main ()
| {
|
| ;
| return 0;
| }
configure:3926: error: in `/var/abs/local/mpg123/src/mpg123-1.12.3':
configure:3930: error: C compiler cannot create executables
See `config.log' for more details.
## Cache variables. ##
ac_cv_build=x86_64-unknown-linux-gnu
ac_cv_env_CCASFLAGS_set=
ac_cv_env_CCASFLAGS_value=
ac_cv_env_CCAS_set=
ac_cv_env_CCAS_value=
ac_cv_env_CC_set=
ac_cv_env_CC_value=
ac_cv_env_CFLAGS_set=set
ac_cv_env_CFLAGS_value='-march=amdfam10 -O2 -pipe'
ac_cv_env_CPPFLAGS_set=
ac_cv_env_CPPFLAGS_value=
ac_cv_env_CPP_set=
ac_cv_env_CPP_value=
ac_cv_env_ESD_CFLAGS_set=
ac_cv_env_ESD_CFLAGS_value=
ac_cv_env_ESD_LIBS_set=
ac_cv_env_ESD_LIBS_value=
ac_cv_env_JACK_CFLAGS_set=
ac_cv_env_JACK_CFLAGS_value=
ac_cv_env_JACK_LIBS_set=
ac_cv_env_JACK_LIBS_value=
ac_cv_env_LDFLAGS_set=set
ac_cv_env_LDFLAGS_value='-Wl,--hash-style=gnu -Wl,--as-needed'
ac_cv_env_LIBS_set=
ac_cv_env_LIBS_value=
ac_cv_env_PKG_CONFIG_set=
ac_cv_env_PKG_CONFIG_value=
ac_cv_env_PULSE_CFLAGS_set=
ac_cv_env_PULSE_CFLAGS_value=
ac_cv_env_PULSE_LIBS_set=
ac_cv_env_PULSE_LIBS_value=
ac_cv_env_SDL_CFLAGS_set=
ac_cv_env_SDL_CFLAGS_value=
ac_cv_env_SDL_LIBS_set=
ac_cv_env_SDL_LIBS_value=
ac_cv_env_build_alias_set=
ac_cv_env_build_alias_value=
ac_cv_env_host_alias_set=
ac_cv_env_host_alias_value=
ac_cv_env_target_alias_set=
ac_cv_env_target_alias_value=
ac_cv_host=x86_64-unknown-linux-gnu
ac_cv_path_install='/bin/install -c'
ac_cv_path_mkdir=/bin/mkdir
ac_cv_prog_AWK=gawk
ac_cv_prog_ac_ct_CC=gcc
ac_cv_prog_make_make_set=yes
## Output variables. ##
ACLOCAL='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run aclocal-1.11'
AIX_CFLAGS=''
AIX_LDFLAGS=''
AIX_LIBS=''
ALIB_CFLAGS=''
ALIB_LDFLAGS=''
ALIB_LIBS=''
ALSA_CFLAGS=''
ALSA_LDFLAGS=''
ALSA_LIBS=''
AMDEPBACKSLASH='\'
AMDEP_FALSE='#'
AMDEP_TRUE=''
AMTAR='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run tar'
API_VERSION='25'
AR=''
ARTS_CFLAGS=''
ARTS_LDFLAGS=''
ARTS_LIBS=''
AS=''
AUTOCONF='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run autoconf'
AUTOHEADER='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run autoheader'
AUTOMAKE='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run automake-1.11'
AWK='gawk'
CC='gcc'
CCAS=''
CCASDEPMODE=''
CCASFLAGS=''
CCDEPMODE=''
CFLAGS='-march=amdfam10 -O2 -pipe'
COREAUDIO_CFLAGS=''
COREAUDIO_LDFLAGS=''
COREAUDIO_LIBS=''
CPP=''
CPPFLAGS=''
CYGPATH_W='echo'
DECODER_LOBJ=''
DECODER_OBJ=''
DEFS=''
DEPDIR='.deps'
DLLTOOL=''
DSYMUTIL=''
DUMMY_CFLAGS=''
DUMMY_LDFLAGS=''
DUMMY_LIBS=''
DUMPBIN=''
ECHO_C=''
ECHO_N='-n'
ECHO_T=''
EGREP=''
ESD_CFLAGS=''
ESD_LDFLAGS=''
ESD_LIBS=''
EXEC_LT_LDFLAGS=''
EXEEXT=''
FGREP=''
GREP=''
HAVE_AIX_FALSE=''
HAVE_AIX_TRUE=''
HAVE_ALIB_FALSE=''
HAVE_ALIB_TRUE=''
HAVE_ALSA_FALSE=''
HAVE_ALSA_TRUE=''
HAVE_ARTS_FALSE=''
HAVE_ARTS_TRUE=''
HAVE_COREAUDIO_FALSE=''
HAVE_COREAUDIO_TRUE=''
HAVE_DUMMY_FALSE=''
HAVE_DUMMY_TRUE=''
HAVE_ESD_FALSE=''
HAVE_ESD_TRUE=''
HAVE_HP_FALSE=''
HAVE_HP_TRUE=''
HAVE_JACK_FALSE=''
HAVE_JACK_TRUE=''
HAVE_MINT_FALSE=''
HAVE_MINT_TRUE=''
HAVE_MODULES_FALSE=''
HAVE_MODULES_TRUE=''
HAVE_NAS_FALSE=''
HAVE_NAS_TRUE=''
HAVE_OPENAL_FALSE=''
HAVE_OPENAL_TRUE=''
HAVE_OS2_FALSE=''
HAVE_OS2_TRUE=''
HAVE_OSS_FALSE=''
HAVE_OSS_TRUE=''
HAVE_PORTAUDIO_FALSE=''
HAVE_PORTAUDIO_TRUE=''
HAVE_PULSE_FALSE=''
HAVE_PULSE_TRUE=''
HAVE_SDL_FALSE=''
HAVE_SDL_TRUE=''
HAVE_SGI_FALSE=''
HAVE_SGI_TRUE=''
HAVE_SNDIO_FALSE=''
HAVE_SNDIO_TRUE=''
HAVE_SUN_FALSE=''
HAVE_SUN_TRUE=''
HAVE_WIN32_FALSE=''
HAVE_WIN32_TRUE=''
HP_CFLAGS=''
HP_LDFLAGS=''
HP_LIBS=''
INCLUDE_STDIO_H=''
INCLUDE_STDLIB_H=''
INCLUDE_SYS_TYPE_H=''
INSTALL_DATA='${INSTALL} -m 644'
INSTALL_PROGRAM='${INSTALL}'
INSTALL_SCRIPT='${INSTALL}'
INSTALL_STRIP_PROGRAM='$(install_sh) -c -s'
JACK_CFLAGS=''
JACK_LDFLAGS=''
JACK_LIBS=''
LD=''
LDFLAGS='-Wl,--hash-style=gnu -Wl,--as-needed'
LFS_LOBJ=''
LIBMPG123_VERSION='25:5:25'
LIBOBJS=''
LIBS=''
LIBTOOL=''
LIPO=''
LN_S=''
LTLIBOBJS=''
LT_LDFLAGS='-export-dynamic'
MAKEINFO='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/missing --run makeinfo'
MINT_CFLAGS=''
MINT_LDFLAGS=''
MINT_LIBS=''
MKDIR_P='/bin/mkdir -p'
MODULE_OBJ=''
NAS_CFLAGS=''
NAS_LDFLAGS=''
NAS_LIBS=''
NM=''
NMEDIT=''
OBJDUMP=''
OBJEXT=''
OPENAL_CFLAGS=''
OPENAL_LDFLAGS=''
OPENAL_LIBS=''
OS2_CFLAGS=''
OS2_LDFLAGS=''
OS2_LIBS=''
OSS_CFLAGS=''
OSS_LDFLAGS=''
OSS_LIBS=''
OTOOL64=''
OTOOL=''
OUTPUT_CFLAGS=''
OUTPUT_LDFLAGS=''
OUTPUT_LIBS=''
OUTPUT_MOD=''
OUTPUT_OBJ=''
PACKAGE='mpg123'
PACKAGE_BUGREPORT='[email protected]'
PACKAGE_NAME='mpg123'
PACKAGE_STRING='mpg123 1.12.3'
PACKAGE_TARNAME='mpg123'
PACKAGE_URL=''
PACKAGE_VERSION='1.12.3'
PATH_SEPARATOR=':'
PKG_CONFIG=''
PORTAUDIO_CFLAGS=''
PORTAUDIO_LDFLAGS=''
PORTAUDIO_LIBS=''
PULSE_CFLAGS=''
PULSE_LDFLAGS=''
PULSE_LIBS=''
RANLIB=''
SDL_CFLAGS=''
SDL_LDFLAGS=''
SDL_LIBS=''
SED=''
SET_MAKE=''
SGI_CFLAGS=''
SGI_LDFLAGS=''
SGI_LIBS=''
SHELL='/bin/sh'
SNDIO_CFLAGS=''
SNDIO_LDFLAGS=''
SNDIO_LIBS=''
STRIP=''
SUN_CFLAGS=''
SUN_LDFLAGS=''
SUN_LIBS=''
VERSION='1.12.3'
WIN32_CFLAGS=''
WIN32_CODES_FALSE=''
WIN32_CODES_TRUE=''
WIN32_LDFLAGS=''
WIN32_LIBS=''
ac_ct_CC='gcc'
ac_ct_DUMPBIN=''
am__EXEEXT_FALSE=''
am__EXEEXT_TRUE=''
am__fastdepCCAS_FALSE=''
am__fastdepCCAS_TRUE=''
am__fastdepCC_FALSE=''
am__fastdepCC_TRUE=''
am__include='include'
am__isrc=''
am__leading_dot='.'
am__quote=''
am__tar='${AMTAR} chof - "$$tardir"'
am__untar='${AMTAR} xf -'
bindir='${exec_prefix}/bin'
build='x86_64-unknown-linux-gnu'
build_alias=''
build_cpu='x86_64'
build_os='linux-gnu'
build_vendor='unknown'
datadir='${datarootdir}'
datarootdir='${prefix}/share'
docdir='${datarootdir}/doc/${PACKAGE_TARNAME}'
dvidir='${docdir}'
exec_prefix='NONE'
host='x86_64-unknown-linux-gnu'
host_alias=''
host_cpu='x86_64'
host_os='linux-gnu'
host_vendor='unknown'
htmldir='${docdir}'
includedir='${prefix}/include'
infodir='${datarootdir}/info'
install_sh='${SHELL} /var/abs/local/mpg123/src/mpg123-1.12.3/build/install-sh'
libdir='${exec_prefix}/lib'
libexecdir='${exec_prefix}/libexec'
localedir='${datarootdir}/locale'
localstatedir='${prefix}/var'
lt_ECHO='echo'
mandir='${datarootdir}/man'
mkdir_p='/bin/mkdir -p'
oldincludedir='/usr/include'
pdfdir='${docdir}'
prefix='/usr'
program_transform_name='s,x,x,'
psdir='${docdir}'
sbindir='${exec_prefix}/sbin'
sharedstatedir='${prefix}/com'
sysconfdir='${prefix}/etc'
target_alias=''
## confdefs.h. ##
/* confdefs.h */
#define PACKAGE_NAME "mpg123"
#define PACKAGE_TARNAME "mpg123"
#define PACKAGE_VERSION "1.12.3"
#define PACKAGE_STRING "mpg123 1.12.3"
#define PACKAGE_BUGREPORT "[email protected]"
#define PACKAGE_URL ""
#define PACKAGE "mpg123"
#define VERSION "1.12.3"
configure: exit 77
the parts i had searched on google are specificaly the
"/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x12): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x19): undefined reference to `__libc_csu_init'"
does anyone have an idea of what could it be?
notice that this doesn't bother me because if i use the glibc from the repositories everything works fine, this is just for curiosity of why it doesn't work
thanks in advance

slacknatcher wrote:
the parts i had searched on google are specificaly the
"/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x12): undefined reference to `__libc_csu_fini'
/usr/lib/gcc/x86_64-unknown-linux-gnu/4.5.1/../../../../lib/crt1.o: In function `_start':
(.text+0x19): undefined reference to `__libc_csu_init'"
does anyone have an idea of what could it be?
notice that this doesn't bother me because if i use the glibc from the repositories everything works fine, this is just for curiosity of why it doesn't work
thanks in advance
You have stripped glibc too much. See the Arch PKGBUILD and make sure your makepkg.conf has STRIP_BINARY etc defined.

The Find function does not work with one of my pdf files

I uninstalled whatever version of the reader that had been my computer at installed 11.0.06. Same problem. Seems like the Find function has a problem with just one of my many pdf files.
For the problem file, the PDF Producer was IIPDFLib2.x, version 1.5. Fast Web View: Yes.
Windows 8.1
Rebel1

I can not select any text, either individual letters or sequences of letters. If I left-click and drag while holding the left button down, I generate a rectangular selection. I can then Ctrl-C the selection and paste it in Word.
So it is a image, with a pdf filename ending rather than jpg or something similar. That probably also explains why the image quality is much worse than with genuine PDF files.
Thanks,
Rebel1

New 3.0 Firmware Copy and Paste not working with images

I have a 3G, 3.0 firmware, and whenever I copy and paste from Safari to email the images always come in as text links NOT as shown in the demo videos on the iPhone website, what gives?

Just following up with my own question. After rebooting the iPhone, images pasted properly into emails.

Currency Translation not working with "Time Reference from Variable"

We have created several Currency Translations using RSCUR with a fixed "Key Date". All have been working fine until we got the request to allow a variable date for the exchange rate date. I have built a variable on 0DATE which I am putting a default date value into using user exit. This default date is the SAME date as the fixed "Key Date" which we have been using. Unfortunately when we use the "Time Reference from Variable" option and use this new variable, no currency conversion is taking place, instead it only shows the original currency values. I am 100% sure that my variable is getting a value and it is the same date we are using for the fixed "Key Date" value so both methods should be using the exact same exchange rates. The documentation that I can find states:
●      Time reference: The time reference for the currency translation can be either fixed or variable.
If the time reference is fixed, the time at which the exchange rate is determined is independent of the data. You have the following options:
○       You can establish that the time reference be determined upon translation.
○       You can select the current date.
○       You can specify a fixed date as the key date.
○       You can specify any variable that exists for InfoObject 0DATE.
○       You can establish that the query key date be used. This is determined in the query settings.
In my case I am only switching from option "You can specify a fixed date as the key date"=(Key Date) to "You can specify any variable that exists for InfoObject 0DATE"=(Time Reference from Variable).
What am I missing? Any help is appreciated.

I neglected to mention that we are calling this currency translation through a WAD button using the SET_CURRENCY_TRANSLATION command. I did do a test by applying the currency conversion within query key figure. This seems to work. So it appears the issue is with how the WAD is processing the variable, not the query. When I display the variable in a drop down item within the WAD it does have the default value that I have assigned in user exit.

New Hard drive replacement not working with Recovery Disc from old drive.

Had a recent hard drive failure and I my HP Recovery disc that I received last year to to restore after system failure; won't work now on new hard drive. Unable to copy disc from Drive D to Drive C is the error I'm getting during phase 1 of recovery setup. BootMgr is not found error when i startup PC. Unable to recover Windows. My Hard disk and system memory test were failing, now ok after new drive install'; still can't get into Windows though.

Hi gardnevd,
As I understand you are facing a Recovery Issue with the new Hard Disk Drive (HDD) you have installed. Kindly request you to provide me with the following information:
Product Number or Product Description of your unit
Click here to know where to find the Product information.
Once I have this information I shall provide you with instructions on further handling this incident.
Let us know how it goes!
*Although I am an HP employee, I am speaking for myself and not for HP.
*Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
* Click on "Purple Thumbs up" button to the left side of my post to say thanks!
Regards
Ahmed

Email sending is not working with utl_smtp (migrated from 9i to 11g)

Hi,
>
We have used UTL_SMTP package to send emails in Oracle 9i. But when we have migrated to Oracle 11g, the procedure used to send emails compiled successfully, but we were not able to receive the mails.
Not able to figure out the exact issue/error.
Please let me know if there is any solution other than using UTL_MAIL in 11g.
Thanks,
Saranya

Hi
I faced similar issue that happened due to ACLs. Check metalink note 557070.1 for details.
Hope it helps.
Rgds
Adnan

CS5 6.3 RAW File not reopening with changes saved from .xmp file?

I recently upgraded from my D70 to a D7000, and downloaded the new plug-in for CS5 RAW (since the D7000's raw images weren't readable). I have no problem opening my photos in RAW 6.3, and tweaking them (just like before). When I'm done and want to save my changes I click "Done" and a .xmp file is saved just like before. However, when I re-open the same RAW file the changes that I previously made seem to have never happened, and I'm back to scratch (which would only happen before if I had deleted the correlating .xmp file). What's going on?? Help!!
edit: The .xmp files are saved next to the raw file in the same folder

In Edit - Preferences - Camera Raw, what is your choice for where to store the settings?
-Noel

I have a website that I am building. Transferring word docs to the site by copy/paste does not work with firefox.Why?

I am trying to complete my website data entry with fire fox since the security of internet explorer is questionable. I am having no success in transferring written or graphic documents from Fire Fox to my website.

I assume this is a sitebuilder tool. Could you mention which sitebuilder it is?
Is the problem that a paste button provided by the sitebuilder does nothing when you click it? This could be related to a Firefox security feature that bars sites from reading your Windows clipboard. Or it could just be broken. If it's a sitebuilder button, I could look into past threads for possible solutions/workarounds.
For pasting text, instead of using a button provided by the sitebuilder, can you use one of the Windows shortcuts?
* Ctrl+v
* right-click > Paste
* Edit menu > Paste ''(if you use the classic menu bar)''
That might not work with images...
Finally, I will say that Internet Explorer 11 is a pretty solid product. If you need to use it for your website builder tool because it only works well in IE, I don't think you are taking a lot of security risk there. Just don't stray over to random sites you don't trust.

My Time Capsule does not work with existing WiFi

Following a question solved on March 24 by LaPastenague, but gone bad again.
Apple AirPort Time Capsule
I felt the need for a physical backup of my data, as I would not completely trust the different clouds. I use, and have used Dropbox for 4-5 years and are very satisfied with that, but I am still not sure if or when a political lunatic will shut off the internet.
I purchased the Apple AP Time Capsule 2T, because all my other stuff are Apple, and that it's wireless. My old backup is Maxtor 300 GB.
Since we stay 2-3 weeks on two locations, one in Norway and one in Sweden (two different countries) we must use Mobile Broadband 4G, cables or fibre connections are useless for us, and we don't have it up to the houses. I have one mini router for each country, we bring with us iPhones, iPads, iMac, Apple TV, APExpress. When we pass the boarder I change the mini router, and the system continues working perfect on the WiFi, except the APExpress that needs to be reconfigured, but then it works.
The APTC was difficult to make working as it would not accept to be in an existing network, but with good help from the Apple Community, LaPastenague, with forcing the TC connect to the APE with Ethernet cable in bridge mode, ref "My Time Capsule does not work with existing WiFi" from March 24, the problem was solved and all gadgets worked together in a perfect harmony, until we changed location.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
I have a slight feeling that the two WiFi bands are making the trouble as during the configuration of the TC sometime the last figure 6 and 7 pops up, and that has something two do with the two different 2,4 and 5 GHZ bands
So, I am curious if you have any idea ?
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?

I can deal with the last question first and easily.
I am thinking of returning the TC if I don't make it work now, but how do I delete all the data that's on it?
Open the airport utility .. go to the disk tab and select erase.
When you select erase you will get mulitiple options.
Quick removes the file table but does not delete the files,, it takes 2min or less.
A Zero out data is the secure way,, by writing 0 ie low level drive format.
It can take several hours..
7 pass will take a week.. not recommended..
35 pass erase is ridiculous.. it would take a month.. put an ax through the TC. It is quick and better.
Now, as I have my second WiFi network, and the APExspress is reconfigured, it's like the TC thinks, I am the base boss here, I am not taking orders from APE one more time, and it simply does not work, not only that, it fluctuates all the time.
The fact that it did work and has now failed might point to faulty unit.
The only way to tell is reset it properly to factory and start over.
Universal Factory Reset.. any model TC or AE.
Unplug your TC/AE from power or turn off at the power point.
Hold in reset. and power the TC/AE back on.. all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
Note..
Be Gentle! Feel the switch click on. It has a positive feel.. add no more pressure after that.
TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
Generally having multiple wireless AP should not cause problems.. but it is better to set channels manually.. so it doesn't go beserk rotating channels.
Remember to keep all names short, no spaces and pure alphanumeric.
Sadly though the Apple routers have no logging now and no SNMP and almost nothing to help diagnose a problem, so if it continues .. take it back to apple.. they have given you no other method of fixing it.

HP C6180 not responding with wireless print from Mac OS X 10.9

My Printer does not work with wireless printing from my Macbook Air OS X 10.9
I tried all the normal stuff I can find.
The text that is there is: The Printer is not responding.

Hi XavierMaassen,
I understand you have a Photosmart C6180 that you're having issues using in Mac 10.9. I'm sorry to hear this has been happening, but I will certainly do my best to assist you.
I'm wondering how you installed the printer. If you had it installed prior to upgrading to 10.9 that could be part of the problem. There are currently no HP drivers available for this printer for 10.9, so you need to uninstall the HP software and install the printer via the Apple updates. Once you do that you should be able to print normally and scan using 3 different methods.
Hope this helps, have a great day!!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do?

Elements 10 canvas not working with tiff images; works fine with jpegs. What to do? It does not allow me to add a colored canvas, only a blank canvas.

Perhaps some of the tiffs are already layers.
In other words, since jpegs don't support layers, they all ways open with one locked background layer, but the tiff format does
support layers so the tiffs don't have to have a locked background layer and can already be a regular layer that supports transparency.
For the tiffs you could add a new color fill layer below and use the color you want the enlarged canvas to be.
On pse 10 look at the bottom of the layers panel for the new adjustment of fill layer icon

"view image" menu option not working with jpg correctly

When I right click on an image in my browser, I can select "view image" and the image by itself will pop up in a new tab. This still works for most image formats, but has stopped working with the jpg format.
Say I go to google's home page, right click on their logo, and select view image. Since their logo is not in jpg format, the logo image will appear in a new tab, and the URL will show the location of that image (in this case, http://www.google.com/images/logos/ps_logo2a_cp.png)
When I try to do this with an image in jpg format, it asks me what I want to do, and gives me the options:
1 - Save file
2 - Open with windows photo viewer
3 - Open with (other)
In trying to make it work right, I selected "open with other" and selected firefox. This almost works how it used to work, it opens up the image in a new tab... but now, instead of showing the URL of the source image, it shows the location of the file on my computer. So for example, if I go to tinypic.com and find the jpg image (http://i56.tinypic.com/nd9d75.jpg). If I right click on that image and select "view image", it opens by itself in a new tab as it should, except the address bar displays (file:///C:/Users/Joe/AppData/Local/Temp/nd9d75-3.jpg) instead of it's web URL.
Does anyone know why this is happening? And/or how I can get firefox's behavior to go back to how it used to work for jpg's in this capacity, like it does for other image formats?

See "Reset Download Actions": http://kb.mozillazine.org/File_types_and_download_actions

IMAQ image to array vi not working with images extracted from avi file

Similar Messages

Maybe you are looking for