IMessage on ML - "Could not sign into iMessage. Please check network settings and try again"
i came across an issue when signing into iMessage with an Apple ID on Mac.
i had been experiencing the "Could not sign into iMessage. Please check network setting and try again" error for iMessage issue since installing Mountain Lion. i finally solved my problem after talking to the Apple Tech Support team.
Here's the steps:
1. Shut down laptop.
2. Switch on laptop again. immediately hold down the left "SHIFT" key until u get into the log in screen. By doing this, ur laptop will be in "Safe Boot" mode.
3. Sign into iMessage using Apple ID. (i was able to sign into iMessage for the first time on my Mac since getting ML)
4. Shut down laptop again.
5. This time switch laptop on normally.
6. You should be able to use iMessage normally.
in addition, make sure the boxes for date & time and timezone are ticked to be set automatically.
Hope this is helpful for users experiencing the same issue i had. it did for me!
Cheers
Okay,
let me add my story to this thread.
Brand spanking MBA, Mountain Lion.......logged into Imessage 1st thing, no prob.
Then, after a few weeks; in the middle of a chat....the name of the other person turned red and my sent messages received a red dot as they were not sent. I checked with the other person.
I couldn`t recieive any messages either, not from any contact.
I logged out, and I couldn`t log in anymore.
I get a yellow triangle saying something like "error while logging in, try again later".
I tried again and again later........
I seeked help on this forum and a user helped me initially.
I re-installed the whole Mountain Lion, a process that I don`t care to repeat too often.
That fixed it for a while, but yesterday the same thing happened.
In the middle of a chat....the red name, the red dots......well, you get the picture.
I tried, to no avail:
# to log in after reseting the PRAM
# boot up and log in whilst in SAVE mode. It will NOT log in, same problem
# to log in after deleting all Imessages and Facetime files in Library/Preferences
# to log in with my wife`s Apple ID, or any ID really.
What did work was logging in with my ID on my wife`s Ipad, no worries.
My account is Yahoo, and don`t seem to be the problem.
Please, any suggestions welcome.
I have urged Apple politley to give us a fix at:
http://www.apple.com/feedback/
Thanks,
MXP 150 Patriot
Similar Messages
-
I get the above error when I try to activate iMessage or face time on my iPhone 5 iOS 7.0.2.
I too faced the same problem . I was using imessage in ios6 and when i upgraded , There were issues like ,
check network connections and Try again . , Connect to itunes for Push notifications . It was irritating and annoying for everyone i guess
Steps to Resolve the i meeage issue
1) Connect your phone to P.C and Back up your datas to P.C via I tunes
2) Once the back up is complete . Connect your phonbe to Wifi or 3G cellular network and Boldly go to Settings-->General --> Reset--> Erase all datas
( Do not worry if you had backed up your datas )
3) Iphone will reboot . it will take some time
4) Then your iphone will start . Click next and you will be prompted for i message activation . Give your apple id and Sign in
5)Keep your phone connected . In P.C you will be prompted if you want to restore ( EOther wise go to I tunes --> File --> Device--> Restore back up
It really worked for me .
Hope this is clear.
Thanks -
I can't get FaceTime or iMessage to work since I upgraded to iOS 7
Hello there, Vonnancy.
The following Knowledge Base article goes over some troubleshooting methods for trying to resolve connectivity issues with Messages and FaceTime:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I have tried turning off my iPad and the wifi. I don't know what else to do or try.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
Cheers, Tom -
I can not log in to iMessage iOS 6 iPhone 5. Error says " Could not sign in. Pleasecheck your network connection and try again. I do have network connection since I can browse the web using wifi!
I have tried using cellular data connection or wifi and I can not sign in?Go to Settings>General>Date and Time>Set Automatically>On.
-
Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM) -
Face time will not connect error message "Please check network conections and Try again" message appears but I'm connected to the internet?
Hey sergioo9,
Thanks for the question. Based on what you stated, it seems like you are having trouble signing into Messages on OSX. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
FaceTime, Game Center, Messages: Troubleshooting sign in issues - Apple Support
Thanks for using Apple Support Communities.
Cheers,
Mario -
I am trying to sign into iMessage. Error--Could not sign in. Please check your network connection and try again.
Any other thoughts, mario49?
I've no trouble connecting to or using iMessage on my iPhone or my iPad; and no trouble accessing iTunes, the iTunes Store, the (iOS) App Store from my iOS devices, the (OS X) App Store from my MBP. So, my Apple ID is still functioning just fine, thank you very much and my network connection is not an issue.
My hosts file has not been tampered with, and I'm not blocked by any firewalls--the failures occur where ever I am.
This issue has been happening only for the last 2 days, but I'm completely locked out of Messages from my MBP.
So, what's the deal? -
I'm able to sign into iCloud & iTunes but not iMessage. "iMessage Activation. Could not sign in. Please check your network connection and try again"
reset network settings
settings- general- reset - reset network settings
now reconnect to wifi
settings - wifi- click network name - enter password - join
if no result
reset all settings
settings-general-reset-reset all settings
now reconnect to wifi
settings- wifi- click network name- enter password - join
Peace, Clyde -
When trying to activate facetime get the message i get "could not sign in. Please check network connections
My Apple ID is correct
tried with a new apple Id ...doesn't work neither
My connection is correct..;
I ve seen that this issue is frequent within mac users
Can anyone bring some help?
Thank youHello
Try this... I had the same problem and this worked for me.
Go to your system preferences → network → make sure WI-FI selected → advanced → DNS tab. Add 8.8.8.8 to the DNS servers. Go back to FaceTime and try to verify your account again.
Good luck! -
When trying to activate FaceTime, get code " Could not sign in.Please check network connections and try again".Wi fi is strong and can access everything else.Any advice?
Hello
Try this... I had the same problem and this worked for me.
Go to your system preferences → network → make sure WI-FI selected → advanced → DNS tab. Add 8.8.8.8 to the DNS servers. Go back to FaceTime and try to verify your account again.
Good luck! -
one day i loggged on and all it said was acssecing itunes store but never got there. then a message came up saying "could not connect to itunes server. check your connection and try again later". what should i do?
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.) -
When I was doing this I was talking to other people, which means my connection is fine, what do I do?
Hey haannahbananaaa,
Thanks for using Apple Support Communities.
"Could not sign in. Please check your network connection and try again" Try this article.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/ts3970
Have a nice day,
Mario -
As the subject line. When I try to activate either iMessage or FaceTime I get this error message "Could not sign in. Please check your network connection and try again." Funny thing Safari works just fine with my network connection. The device in question is an iPhone4. iOS 7.06
The following link has a section for dealing with that error message that may help: http://support.apple.com/kb/TS4268
-
On IOS7, iMessage "waiting for activation" when I enter my Apple ID for iMessage, I receive a message "Could not sign in. Please check your network connection and try again" I am unable to get many text message because of this. What do I do?
If you're having trouble logging in to FaceTime or Messages, the following article may be useful:
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Maybe you are looking for
-
Cube data not getting displayed in OBI
Hi After importing a cube in OBI when I am trying to fetch the data it says " The criteria doesn't result in any data" . The cube is not fully populated and only some of the measures have data like 2007 q1 jan Boston sales 200. Is there something I a
-
How long does it take for a store to process an online order for store pick up
Hello, I placed an order for a Macbook Pro on November 11, 2014. Scheduled an in store pick up where Best Buy estimated pick up date is November 14. I didn't receive the email or text to pick up the item, so I decided to call 1-800-best-buy to see if
-
Batch managment from MM point of view
Dear Friends, I want to learn the Batch management from MM point of view. Can you please provide me the material which will explain me how to configure the SAP system for batch managment from MM point of view. Thanks a lot Nilesh
-
Changing an input field's appearance to Optional in an ESS WD Java scenario
This thread is posted to help customers with a common user based issue with ESS SAP may deliver some fields in ESS iviews as mandatory however you may not want some fields to be mandatory and may want the iview display to guide the user appropriately
-
890GXM-G65 AMD-V missing from BIOS
Hi Everyone, I have been trying to locate the option in BIOS to enable AMD virtualization on my CPU. My AMD Phenom II X4 965 supports virtualization but the option in BIOS is missing. Does anyone know how to get around this? or is there a BIOS update