Immediate TO creation during posting 261 movement

Hi,
I have done the OMLR setting A for 261 movement. But Immediate TO is not created for production order and maintanance order goods movement[261].Please confirm that any other configuration setting is missing or what are the steps to create immediate TO for 261 movement. Thanks.
Regards,
Sathya M

Hi ,
GOTO
IMG > Logistics Execution >Warehouse Management>Interfaces>Inventory Management > Define Movement Types >LE-WM Interface to Inventory Management
Here find the entry of combination --- your warehouse no , ref. movement type 261
there you will find a column Immediate To creation , here enter A .
and also special movement indicator as A .
If the entry does not exists create it ( make it specific so that only for your Wahrehouse this settings would be valid)
Regards,
Anupam
Edited by: Anupam Halder on Jul 16, 2009 10:51 AM

Similar Messages

Quality Lot Creation during various stock movements

I am unable to trigger a quality inspection when moving the material from unrestricted use to project-unrestricted [412Q] or from project-unrestricted to different project-unrestricted [415Q]. Can anybody help me in this regard? Also how do i trigger a quality inspection before and after a service order to check the material quality? note: [] contains movement type.

543 Consumption from stock of material provided to vendor
This movement cannot be entered manually.
The consumption of components for a subcontract order is posted using goods receipt for purchase order (101). It can be corrected by means of a subsequent adjustment.
Possible special stock indicators: E, Q.
For the special stock indicators E and Q, you must ensure that the quantity is not removed from the stock of material provided to vendor, but from the unrestricted-use sales order or project stock.
545 Goods receipt from by-product from subcontracting
If a component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted during goods receipt for purchase order or during the subsequent adjustment.
Possible special stock indicators: E, Q
For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
551 Scrapping from unrestricted-use stock
553 Scrapping from stock in quality inspection
555 Scrapping from blocked stock
Possible special stock indicators: E, K, Q
561 Initial entry of stock - unrestricted-use stock
563 Initial entry of stock - quality inspection
564 Initial entry of stock - blocked stock
During initial entry of stock balances, you enter the physical warehouse stock frigures or the book inventory from your old system into the SAP System for productive operation. This data entry usually takes place by means of batch input.
Possible special stock indicators: E, K, M, O, Q, V, W (565: only E, K, Q)

Immediate TO creation and confirmation during MB1B

Hi
In one of our client scenario , we need to create a immediate TO creation and confirmation with respect to PCN created during stock transfer from one storage location to another storage location with in a same plant .
I have done the neccesay setting in Tcode OMLR , but the system is not been able to create the immidiate TO perhaps system doesn't know from which storage type it sohuld select the material.
Can anybody hleps me how to configure this . Do i need to customise storage location control .if yes then what are steps in details ?
Thanks
RAJK
Edited by: RAJ K on May 3, 2010 10:37 PM

Please refer the following thread: -
TO not created from TR
Thanks
Swagat

Travel Expense - Posting run error - Error during creation of posting run

Hi Guru's,
Look forward for your insights. Here you go with my question.
We are implementing Expense Mgt with Portal with out scope for payroll in SAP. I have set up Expense type, WT, Symbolic A/c to G/L Accounts. Im performing Unit testing currently.
Created Expense trip in ESS, from R/3 tcode PRAP, have approved trip, and settled through Tcode - PREC.
When I try to create posting run under transfer to accounting, I get following error
Error during creation of posting run number (->PR1
Message no. 56840
I'm not sure why this error was popping up. Appreciate your suggestion.
Regards
Praveen.N

Hi,
Since you are trying to make payment through FI, you need to maintain ur employee as Vendor. You can do it through PRAA.
So while creating posting run for this trip, it checks if the respective Vendor for this employee is maintained or not.
Pls maintain it as vendor and see if the errors are still coming.
Rakesh

Delivery creation during transfer postings and posting changes

Dear Experts,
Whenever i am posting a transfer posting with movement type 412 'Q' in a HUM managed storage location it is creating a outbound delivery. Basically this is a posting change and the system should not create a delivery. I want to prevent the creation of a delivery in this case.
What are the settings that creates a delivery whenever a transfer posting is performed without reference to a STO or a PO. Any posting happening with MB1B or MB11 that results in a delivery. PLease let me know the exact settings to look out for.
Thanks in advance for your feedback.
Raj

SPRO>LOGISTICS GENERAL>>HANDLING UNIT MANAGMENT> BASICS>MATERIAL MANAGEMENT>INVENTORY MANAGEMENT>SET QMCHECK AND DELIVERY TYPE FOR EACH MOVEMENT TYPE
THIS IS THE NODE WHICH IS RESPPOSIBLE FOR THE SETTINGS OF DELIVERY CREATION
ALONG WITH THE ABOVE NODE THE NODE FOR HU REQUIREMENT FOR STORAGE LOCATION AND DEFAULT VALUE FOR DELIVERY IS RESPONSIBLE FOR THE OUTBOUND DELIVERY CREATED IN YOUR CASE
Edited by: Sap: IN on Aug 17, 2011 7:00 AM

Error during creation of posting runnumber

Hello there,
I am trying to post a trip using transaction PRFI after the trip has been approved and settled and experiencing the error bellow. Two days ago, I was able to perform this transation PRFI and PRRW succesfully. Please advise.
Leon
*Error during creation of posting run number (->PR1*
*Message no. 56840*

Hi Saathi,
If you need to post the document to AP, all the employees have to be converted as Vendors using T code PRAA. But this wont be required when you run through payroll. I hope the error occured due to not converting the employee as vendor. Pl check & revert.
Thanks,
Nandagopal C

Stock is shown as outstanding although 261 movement type has been performed

Hi all,
I was doing 261 movement type against production order without passing reservation number but the client said that if we do not pass reservation number stock is shown as outstanding against reservation leading to inaccurate results on MRP run etc....But this is not clear to me... Can anyone tell me that if I post 2 good issues one without passing reservation number and another passing reservation number how can I test the difference betwen two scenarios like what do I need to check after I pass the reservation number.. I did as client said but dont know why and what difference do I see in SAP..Any thing which I need to check in MMBE after passing the reservation or any other transcation...
Please help me.....

Hi Uday,
This statement was clear but passing reservation has impact on reserved stock..I myself checked programitically ie I am calling BAPI_GOODSMVT_CREATE for doing 261 . I had 2 components for my production order..For 1 item I passed reservation number and for 2nd item I did not pass reservation in 2nd item..Then I checked the stocks in MMBE.. In both cases unrestricted stock is getting reduced but the reserved stock is getting reduced only in 1st case and not in 2nd case.
My issue is for my order type and plant all components is checked in OPK4..So I need to do 261 all components (backflush and non-backflush) ...Earlier I was replicating CO11N programitically and I was able to pass goods movement data along with confirmation creation passing reservation number.My requirement was fulfilled but then suddenly we found that in 1 case this approach was failing and that was If i was doing 261 for a serialized component it gives me message 'Serial no obligatory materail cannot b updated' and in my case serialized components will be there..
For the above problem we are now doing 261 replicationg MIGO_GI and not CO11N where we can pass serial number also and reservation also .. But the problem with this approach is that we are not able to pass reservation number for backflushed items..If we pass reservation no for backflush items I am getting the error 'For reservation xxx item xxx,goodsmvt not possible'..Not clear why SAP has some type of limitation in both the approaches..
Where in I can d 261 for all components ( serialized or non serialized ) and also pass reservation number for both backflush and non backflush items..Can you suggest me an approach by which I can meet the desired functionality..
It would be great if you can suggest some thing...As you have knowledge about the whole process you can surely help me by at least saying that if I do not pass reservation then how can I reduce the reserved stock by the 2nd approach or by saying that why SAP does not allow 261 from CO11N for serialized component...

SAP PP 261 movement open stock

HI experts,
we are into food industry, first we create process order through cor1, den create reservation though mb21 then migo (transfer posting) and den confirm the process order.
there are couple of items are still showing that its pending qty in 261 movement but not in 311 movement coz migo(transfer posting is allready done) but in confirmation , we have skip those item due to non-avaibility of stock.
now the problem is we have done mass process order and status shows TECO this activity should done every end of the month. now how do I clear this items which is still showing that its pending in 261movement ...
pls advice. and if the costing is done then wat are the other way to clear those items which is available on 261movement type , we chek this through mb25.
waiting for your earliest reply,
Regards,
Minesh Soneji

Minesh,
I think it will be a bit late if you waiting until month end then only found out those missing item. I suggest you to inform your production planner or PIC which do the confirmation to check report tcode COGI on a daily basis as every missing good movement during confirmation will be capturing there.
You can try to run COGI in your production server and you will see those 261 problem item is all capturing there.
Hope my solution can help you.

Inspection Lot creation for the 103 movement type

<<Don't ask for or offer points>>
Dear Experts,
we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node Quality Management --> Quality Inspection -->Inspection Lot Creation -->Inspection for Goods Movements) but still I am unable to achieve the results. Same is happening for 105 movements.
Kindly let us know what settings need to be done in order to achieve the same.
Full points will be awarded for the reply
Regards.
Edited by: Matt on Sep 18, 2011 4:44 PM

Hi,
If you have activated two inspection types (eg 01, 0101) of same inspection lot origin (01), in material master you should have a preferred indicator set for the inspection type for which you want to be selected when you perform goods receipt.
This check box is available in the inspection type set up in the Material master.
Also check whether the post to inspection stock indicator is set for the material (in the inspection type), then only material will be posted to inspection stock.
Please confirm, what happens to the stock after making MIGO. check in MMBE and confirm
Go through the link and maintain the necessary settings. I think default settings for 01 type should work.
http://help.sap.com/saphelp_470/helpdata/en/2d/350e4d448c11d189420000e829fbbd/content.htm
Regards
Hari

Error message (M3024) during parallel goods movement

For publication distribution, collected unreferenced deliveries and goods issues are done in SAP system for a customer group by a program which is triggered by a web service every day. Standart SAP functionalities are used in this program. At goods issue part of program, an error message is occuring "Valuation data for material & is locked by the user &" with error code :M3024. The user who processes the program is locking himself. Also we have checked the other goods movement types in standart transactions (MB1B-MB11..)and same problem was occured. We have checked the notes that we applied before for to avoid material lock in paralel goods movement. There is nothing changed both in customizing and deveploment after upgrade. So we couldnt find the way to fix this problem. FIRST ANSWER FROM SAP***************************************** Can you kindly review the attached note 70865 with regards to this issue. WE APPLIED.-- We reviewed 70865 and this solution not applicable for our current system. According to note; We set material late lock exclusive time 15 seconds in OMJI. This solution solved material lock error at all plant level. After this solution, We get same batch error during goods movement(m3862), Then We applied note 157423, this note solved material batch lock error during goods movement, At last we have now m3024(Material valuation error lock) error during all goods movement. THEN********************************* As explained in the note 70865 , to ensure data integrity, it is necessary to block the material against updates by other users during good movements. This is achieved by blocking the material plant (lock object MARC) and the material valuation area (lock object MBEW) exclusively against othertransactions which update the material master. What you can do, as advised in the note, is to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously. The problem is that you will experience a disadvantage of performance loss after this change. Please, notice that with this change in OMJI, several users will be ableto carry out GOODS MOVEMENTS to the same material and plant simultaneously. This change will not allow the simultaneous input of a goods movement and an invoice for the same material (in this case, the material will be locked as soon as the purchase order item is adopted in the invoice and the error message M3024 will occur). When the error message M3024 occurs, you could check with transaction SM12, there you could find some tables like MBEW are locked by user. The table is locked to prevent valuation, quantity etc. to be updated. System does not check if it is standard price or MAP, as soon as you work with one material it will be locked (its valuation data has to be locked, because otherwise there is no guarantee of the consistency of the stock values. Without this lock mechanism the possibility of serious data inconsistencies could arise). your customizing under: SPRO > IMG > Material Management > Set up Material block for goods movements Here you could choose setting 2(at positing) to have only a short locking period at posting. Please review information in attached notes. 521945 FAQ: Material block 322989 Late block: Number of blocking attempts AT LAST ** PROBLEM STILL GOING ON WHAT SHOULD WE DO TO SOLVE THIS ERROR.

HI Fatih,
Refer to SAP Note 1744780 - Error message M3024 during Invoice Verification process .
In the standard system it is not possible the simultaneous entry of a GOODS MOVEMENTS and an INVOICE for the same material and the same plant.
When you enter the invoice for the purchase order item, the valuation data for the material is updated, therefore this valuation data (table MBEW) needs to be blocked so that it is not changed at the same time by any other transaction (which might cause inconsistencies).
Resolution
This system behavior can not be avoided by any customizing setting or any user exit.
This is correct system behavior to protect the other transactions update the material master.
As advised in the note 70865 :
It is possible to activate the late block via transaction OMJI. As a result of this change, several users will be able to carry out good movements to the same material and plant simultaneously, however there is a risk to cause the data inconsistency and performance problems.

Transport Error occurred during post-handling RS_AFTER_IMPORT for ISCS L

Hi,
We are moving cube 0IC_C03 of material stocks/movements
from Dev to Quality and we are facing problem while transporting the Transfer Structure 2lis_03_BF. Other two TS moved successfully.
The transporting is failing with the below error:
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L"
We tried moving couple of times , still it was failing with the same error and even we tried to activate in Quality with the activate program .It say " there is no Transfer structure to activate.".
BW system is 3.1 c with service pack 18.
Your help greatly appreciated
Thanks,
Sudharani

Hi there,
Have you checked that DataSource is activated and replicated in your R3 Quality system? Check in BW for your source system if 2LIS_03_BF is there.
Hope this helps,
Regards,
Carlos

Assigning to differenet consumption a/c for same Raw Mat 261 MOV-Diff FG

Dear Experts,
We have the Current Settings in the same plant 5160:-
Raw             Valuation          Mov         Finished Product
Material        Class               Type
MOP                9000              261        NPK
MOP                9000              261        MOP-Traded
We have OBYC Settings:-
Valuation Modifier 0002
General Modification VBR
Valuation Class 9000
GL Code (605001-Raw Material Consumption)
Now when we are doing MFBF in same plant 5160
both the consumption entry posted to Raw Material Consumption (605001).
We want for Producing NPK with 261 movement it should hit Raw material Consumption A/c(605001) but for producing MOP-Traded it should hit some other GL code Say - 606001 with same 261 movement.
Please advise if it is possible, then where to make changes.
Regards,
Alok Parida

Use diff vauation calss becuase you are asking the solution for the same plant that can be done using valuation class only.
you should have diff valuation calss for raw material and trading items

Quality inspection lot creation during GR for STO

Dear Friends,
I have a Scenario for Quality inspection lot creation during GR with respect to STO
can use inspection type 01
or is there any other inspection type to create inspection lot during GR for STO
Thanks & Regards
Raj

Dear Friends,
when i maintain inspection type 08
Inspection lot is created in GR Plant
Thanks for that
but when i am moving the stock from Plant Sloc A to same plant Sloc B one more inspection lot is cretaed (movment type 311)
if i go to SPRO i can deactivate 311 movement type to avoid creating inspection lot
but it is client level , i need to restrict only for one plant
is there any other way to control just one inspection lot for one GR
if you are not clear with my writing pls do not hesitate to ask for more information
Thanks & Regards
Raj

Immediate TO creation

Dear WM gurus.
We are trying to create immediate TO for a GR for a purchase order.We have maintained the setting of immediate TO creation in config in LE-WM in movement types .
when we do the GR we see that only TR is created and TO is not created.
Kindly help in this regard.
Ram

Hi,
The immediate TO creation setup should be in Interfaces -> Inventory Management -> Define Movement Types -> LE-WM Interface inventory management. The setting in movement type configruation is for automatic TO creation (rather than immediate TO creation).
Beside the configuration setting, certain requirements must also be met for immediate TO creation as well. Please check this link for detail: http://help.sap.com/saphelp_47x200/helpdata/en/c6/f83f154afa11d182b90000e829fbfe/content.htm
Also, don't forget to setup mail control for immediate TO creation in case the TO creation is failed you will get a error message sent to your inbox.
Hope it helps

Error during search for movement type (953)

Hi All,
When I'm trying to issue goods to an internal order, I get the below error
Error during search for movement type (953)
The explanation is as follows
The movement type of the warehouse system and certain parameters are assigned to each movement type of the inventory management system
In this case no movement type of the warehouse management system was assigned to the inventory management movement type used by the paramaters enclosed in parantheses in the eror message.
Is there some config missing in this case?? Please let me know how to overcome this error
Regards,
Ashwin

when you create new movement types in MM, then you certainly have to create WM movement types too, if you want use the new movement types to post at a warehouse managed storage location.
This customizing needs to be done in IMG > LE > WM > Activities > transfers > define movement types
and
IMG > LE > WM > interfaces > inventory management > define movement types

Immediate TO creation during posting 261 movement

Similar Messages

Maybe you are looking for