IMove sound track won't go away!

I created a soundtrack in garageband 11, imported it to iMove 11 then went back to lengthen it slightly. iMovie will NOT recognize the revised soundtrack! I have deleted the old one and reimported the new one to iTunes and then into iMove but the old track will not go away. Please tell me what to do.

If you go to the Protect website, can you still locate the Z10?
Try leaving the battery out for a full five minutes and reinsert.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Similar Messages

Clicking sound that won't go away

Please Help -
I downloaded the quicktime software that enables QT to read mpeg2 videos and when I rebooted the volume window/display appeared in the middle of the screen. Now it won't go away and there is never ending clicking sound that is coming out at full volume. Plus when I go to turn it down, it automatically goes back up to full volume.
I've booted and rebooted and nothing changes.
Doea anyone have any suggestions

Only other thing I can think of would be to go into the Sound prefs/setup pane and disable the connection/signal to that device before sleeping the machine. If that works, then perhaps an AppleScript or Automator script could be written to facilitate doing that before sleep, and afterwards to re-enable it when needed.
If the Newmark device has an on/off switch, perhaps using it would be sufficient.
You might check the Numark website, see if they have a tech support area and if so, if there has been mention of a similar problem. If there is, a solution may be posted.

IMovie sound track

On iMovie, can you play a live music recording keep the sound track playing and add other visuals?
Thanks

Hello, songthief!
Welcome to the discussions!
What format was the commercial CD song? Did it play in iMovie?
You might want to re-record it to get it into a form that iDVD will burn. You can do this several ways. Here are two suggestions:
1. Import the song into iTunes, then burn it to a CD. Reimport the song from the CD back into iTunes in AIFF, then import it into your iMovie.
2. Record the song using WireTap Pro and import the AIC file that it creates into your imovie.
Also, one more tip:
Don't send your iMovie to iDVD from WITHIN your iMovie. Close your finished iMovie, open iDVD, create your project and then drag/drop your iMovie into iDVD's main screen. You will find your movie in 'Media' ->'Movies.' This prevents double rendering of your clips, 'jaggies' in your final burned DVD and other problems.

Can't open iMovie - error message won't go away

The error message reads "The movie File "Pierce Struts" cannot be found. Without this file, the movie cannot play properly."
And then I either click Cancel or Search.
I've tried everything and can't get this error message to stop. It won't let me open iMovie. Help.

reproduce is easy. anytime i click to open an attachment or a pdf file.
it won't open. comes up with notice that adobe acrobat has stopped
working and the program will close. I can go to READER AND OPEN THE
FILE BUT NOT FROM ACROBAT X PRO. RATHER SILLY.
ERROR MESSAGES ATTACHED
THANKS FOR THE ASSIST
Dan Valentine, GRI, e-PRO, MA min
Broker-Owner
Valentine Sales & Management
"Building & Maintaining Rental Portfolios"
"One-Stop-Shop: AcquireRehabLeaseManagementStrategic Disposition"
www.ValentineTeam.com
www.ValentinePropertyManagement.com
www.InvestAZRentals.com
12031 N. Cave Creek Rd.
Phoenix, AZ 85020
Cell-Text 602-377-0621
Office- 602-866-0150
Fax-602-926-8260
[email protected]

IMovie sound tracks

one audio track in my iMovie application does not respond to the checkbox control. I've already dumped the iMovie plist, which did nothing. Can anyone help?
G5 Mac OS X (10.3.9)

one audio track in my iMovie application does not
respond to the checkbox control. I've already dumped
the iMovie plist, which did nothing. Can anyone
help?
Can you be a bit more specific as to what you are wanting to do?
Are you certain that you clicked on the audio clip to highlight it before trying to alter it?
Sue

Left speaker has a picking sound that won't go away!

OK I have a 2GENERATION 6GB iPod mini, it has worked fine for a good time now, but recently I have been hearing a picking sound in the left ear, it is not the ear buds because I have tried three different ones and they all do the same thing.
I have tried restoring the iPod and downgrading the firmwares, but that didn't help anything.
I when into maintenance mode and scanned everything and it checked out clean.
I've also cleaned out the headphone jack with some alcohol and a cloth, but to no avail!
I need help it is aviously a hardware problem, and the only to pieces of hardware that could cause this are the mother board and the Little detachable PC board that has the headphone jack on it, so can someone tell me which one it is?
I know how to open my iPod and I could buy a replacement if I had to.
Windows XP Pro

I agree too - it is a hardware issue, having said that I cant tell you which one.
It may be the dust causes the problem, as it is quite common with most of the amprefier, therefore if I were you I may try to clean the iPod before the part replacement

I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

I can't export my video which contains only photos, sound tracks nor play it in fullscreen iMovie it shuts down. And now my whole file won't open at all it'll open with nothing inside ??

I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul

From good iMovie to iDVD sound track not playing (let us try this again!)

There was an earlier problem of this posted here...the question was marked ANSWERED...but didn't solve anything for most of us that replied. So let us take it out for another spin...
Created in iMovie...works perfect in iMovie 6...then SHARE with iDVD. Attempting to preview...no sound track is played/heard.
Can someone let us know what is going on...how to fix...and why we users are forced to be beta-testers for RELEASED software? This problem seem like something that SHOULD have been found, tested and corrected by release date.
This product is wasting a lot of user's time and dvd discs.
Thanks

This product is wasting a lot of user's time and dvd discs.
Well I can help you stop wasting disks, at least! Use "Save as Disk Image" to encode the project and create a ".img" file. You can test the final encoding by mounting the .img file and playing it with DVD player in your applications folder. If this has sound, then burn it with Disk Utility.
iMovie will sometimes tolerate both 12 bit and 16 bit audio. iDVD won't - it must have 16 bit audio. Check the settings on your camcorder with the problem DV tape in it. If it is 12 bit audio, there are fixes listed here:
http://docs.info.apple.com/article.html?artnum=61636
http://danslagle.dvmix.com/mac/iMovie/audio/1001.shtml
http://danslagle.dvmix.com/mac/iMovie/audio/1000.shtml
I know you say it plays fine in iMovie, but these fixes sometimes help files that work in iMovie but don't work right in iDVD.
If none of this applies, please let us know, and as F Shippey said, let Apple know too!
John B.

IMovie HD doesn't recognize sound track from MPEG1 files

My camera creates MPEG1 files which IMovie HD doesn't recognize the sound track. The Apple Store tech told me to purchase Quicktime Pro & save my files as MPEG4. After doing so IMovie finds no audio source.
Also I tried to reinstall IMovie (not HD) which worked fine, but it won't reinstall.
What to do?

no, QT can not 'demuxx' ...
and avoid re-installs, MacOsX is not Windows.. ;))
simply download and use for free
www.squared5.com
Mpeg Streamclip
open your mpeg1, choose 'dv stream' as export option.. done.

Re ilife 11: I bought it so I could manipulate the sound WITHIN an imovie clip. The sound track in imovie 09 fluctuates wildly following export of the movie. It seems that ilife 11 in fact does not have improved controls. Any suggestions?

Can I transfer my files to the apple movie "pro" system instead? I forget what its proper name is. With that programme like the old imovie of '05 approximately, you can grab the sound track within a clip and manipulate its volume up or down.
I need to do that to compensate for the coder problems in imovie 09 and 11 soundtracks.

ecivres wrote:
....you can grab the sound track within a clip and manipulate its volume up or down...
This can be done quite easily in iMovie '11.
Firstly, click on the waveform icon at the bottom right of iMovie's window (also at the lower right of the Project window) - shown here:
You will see the volume level line within the waveform. For the section you wish to lower the volume, click and drag across the waveform so that it is highlighted with a yellow border. Now you can drag the volume line up and down. See the following example, showing the different volume levels:
TIP: Set the thumbnail slider (next to the waveform icon) to half a second - this will show more detail in the waveform, with each thumbnail representing half a second of video.
John
Message was edited by: John Cogdell - added TIP

"Newborn" sound track in iMovie - what song is it?

The iMovie sound effects include one called "Newborn".
It's a jazz piano arrangement of some old standard, I think. But what is the song?
I'm wondering if "Newborn" refers to Phineas Newborn, though the piece doesn't seem to be in his style.
Here's a youTube video with the music: https://www.youtube.com/watch?v=2s1LaIbBFvM
Thanks!
Hal

The D. D. Hanke song is based on the Newborn track. I have found a couple of other instances of this.
Shine Your Light seems unrelated, I agree.
But, just to clarify, I am trying to identify the song being played in the Newborn track itself. The Newborn track is all jazz piano, so you can't tell what song it is unless you happen to recognize the tune. I am guessing from the style that it is a song written between say 1920 and 1960.
Is there some way to ask Apple who is playing the Newborn track? Someone must know that, because Apple bought the rights from that person.
Thanks!
Hal

I just got a new iPhone 4S and unless I am in the sounds section of settings the ringer display won't go away...

I have the phone on vibrate and the ringer box won't go away unless I open the sounds section of the settings button.

Try restarting your phone by using the power button and slide to shutdown or hold the power button and home button for about 10s or until the phone reboots.

IMovie backking Sound tracks to import

A few years agao, when I used to make lots of iMovies, there used to be a page on the Apple site where you could download sound tracks that were good for home movies. Does that page still exist? If not, where else can I download background music for free?
Thanks you

Ui!
Welcome to discussions!
You might also want to look at macjams.com
Great site for free original music!
Sue
iMac ppcG5 1.8 GHz 20FP & (2)iMac G4 800MHz 17FP Mac OS X (10.3.9) OS X 10.4.6 / iLife 4,5,6 Superdrives & 1 G RAM / QT6 pro

In iMovie, audio tracks from iTunes won't play.

Whenever i add an iTunes track, that track won't play. I've fiddled with the volume, my computer volume, and lots of other stuff. Help!

See if these help.
iPod does not play content purchased from the iTMS.
Troubleshooting songs and audiobooks that won't play on the iPod.

How can I stop sound track from being divided when adding clips to other tracks in PrE12?

The situation:
I have a project with several minutes of video clips on the timeline (expert view) in "Video 1/Audio 1." There is also music on the sound track (below the empty "Narration" track).
Any time I make an edit to the Video 1 track, PRE cuts the Sound Track. (Note that this is not the Audio 1 track, it's the sound track which is two tracks away.) If I insert a clip, the Sound Track is cut and left with a gap. Same if I do a FreezeFrame insert. This is bad enough (make ten insertions, have the Sound Track chopped into ten separate pieces), but it gets worse: when I try to slide the Sound Track pieces back together, the Video 1 clips will be moved around.
This appears to be a major bug but I'm hoping there is a simple way to deal with it.
Here's what the Manual (p.71) has to say about it (not much).
"When you insert a clip into the Expert view timeline, adjacent clips on all tracks shift to accommodate the new clip. By shifting all clips together, the audio and video of the existing clips remain in sync."
* The question here is, adjacent to what? The Sound Track is a continuous music clip of many minutes; it is alone on the Track, and there is nothing on the track above it (Narration track). So it's not adjacent to anything, and yet it is being chopped up.
The Manual continues:
"Sometimes, you don’t want all clips to shift with each insertion. For example, when you add background music that superimposes the entire movie, you don’t want clips to shift."
*They got that right, but they don't say anything about how to prevent it.
This next makes no sense at all:
"To shift specific clips togather, press the Alt key as you insert. At a time, you can shift specific clips simultaneously on a maximum of two tracks. These include the track receiving the insertion and the track containing the linked audio or video (if any). The affected tracks shift together, remaining aligned. The clips on other tracks are unaffected."
*There is no mention of how to specify what clips would be shifted, or not.
I'm not dealing with linked clips. And they tell me how to shift clips (sort of) but nothing about how to stop clips from being cut up and shifted. This all makes it very hard to create a coordinated product.
Any suggestions or solutions will be much appreciated.

Thanks, ATR,
I wll try this--but I still am unclear on how to do what the Manual says is possible: select clips on another track that WILL be moved, if I so desire, so as to remain synched to the main Video track.
UPDATE:
In the case of inserting Freeze Frame, I just tried both Ctrl method and Alt method, and neither worked.
1. Put Video on Vid1 track
2. Put Music on Sound Track
3. Ran a few seconds of Vid
4. Stopped Vid, selected Freeze Frame
5. Held down Ctrl key while clicking "Insert in Movie" also tried with holding down Alt key.
Result: a 3 second still was inserted int the Vid1 track. A corresponding gap was created in the Sound Track.
6. Slid the final part of the Sound Track to the left along the timeline to re-connect it to the next segment created by the above process.
Result: the video following the final Freeze Frame was pushed to the right end of Video1 track.
7. Slid the Sound Track all the way to the left.
Result: the entire Video 1 Track contents were pushed to the right and divided in pieces.
I documented each step with screen shots which I can send if you want them and if I can figure out how to do it.
UPDATE #2
In the case of inserting a video clip to the Timeline, I just tried both Ctrl method and Alt method, and neither worked.
1. Locate video in Project Assets
2a. R click video in Project Assets (pull-down menu appears), hold down Ctrl, click Insert to Timeline.
Result: Vid clip is inserted on Video 1 track, Sound Track is separated with a corresponding gap.
2b. R click video in Project Assets (pull-down menu appears), push Alt
Result: pull-down menu disappears as soon as Alt is pushed down.
I can stil drag the Vid clip but it's one more manual step...I love shortcuts!!

IMove sound track won't go away!

Similar Messages

Maybe you are looking for