IMovie 08 cutting off the end of my video when exporting

First off, I'm running 10.5.3, iMovie 7.1.2, iDVD 7.0.2 on a MB Pro. I have a 256mg nVidia video card, 4gigs of RAM and about 55Gigs of space left on my hard drive. The movie is about 5-9gigs in size-I made sure everything was updated before I started. I created a 45 min movie in iMovie and exported it via-"export using QuickTime." Under "options->settings" I chose Apple Intermediate Codec (frame rate current, compressor-other) with the default settings for AIC. It takes about 35 minutes to process. I import the movie into iDVD via drag-and-drop where I want the movie to go in the menu. All the menu links, music and buttons work. I test the movie and its flawless up until the very end where I have the credits. It plays all the credits except the second to last one. The one that failing is a scrolling credit that lasts the maximum 60 seconds and the last credit/frame of the video is a non-scrolling screen that lasts for 6 seconds. This 6 second credit/final frame is fine. The whole movie is exactly 45:56sec. What happens is that the movie will play through all the credits and once it gets to flawed one, instead of scrolling words it scrolls a solid white block up the screen where all the words should be. I've tried the whole share/import to iDVD twice and actually let it burn to a disc once. Same problems. I have tried exporting to the media browser as well, same problem. The video has the issue once it's exported (so the problem is not in iDVD 08). ANY tips or ideas would be welcome. Sorry if there is a ton of useless info, not sure what's relevant and what isn't. Can't find anything specific to my issue in other posts.
(I posted this in iDVD before I figured out that the problem was with iMovie and not iDVD)
THANK YOU!!!
Luke

Ditto white screen problem.
I am using iMovie 08 for a 23 minute photo-music slideshow for more control over placement and my music.
The final scrolling credits are 60 seconds long over a photo that is 59 seconds long. I have a wipe right and a new photo and the credits/music end. Everything plays well in imovie, but on the DVD i burn with iDVD, there is a white screen where the credits should be.
Applecare suggested changing to another photo. I did. No change, another DVD coaster. Applecare suggested changing the jpg photo to tiff. I did, no change, another DVD coaster.
I exported again in Media Browser, different name, but got the same white screen.
The 5 other titles in the project are fine in iDVD. When I play it on my TV, it looks fantastic, except for that last white screen and no credits.
Any suggestions?
2.5 Core 2 Duo MBP, 2 gB RAM, all software updates complete, iMovie 08

Similar Messages

  • How do I get the bookmarks app for ipad to show my bookmarks in their entirety instead of cutting off the end?

    how do I get the bookmarks app for ipad to show my bookmarks in their entirety instead of cutting off the end?

    See also:
    *CheckPlaces: https://addons.mozilla.org/firefox/addon/checkplaces/
    *Bookmark Favicon Changer: https://addons.mozilla.org/firefox/addon/bookmark-favicon-changer/

  • My iPod Classic is cutting off the ends of songs; what's up with this?

    My iPod Classic is cutting off the ends of songs...just silence. The play indicator shows that there's more data there but it's just blank. The songs play fine on iTunes and the data on my PC (Windows 7, iTunes 11.02.26). And it's not always the same song... It's like random. So it's got to be a bug in the iPod Classic firmware. Any help from Apple? Get a Zune?

    Is it always the same songs that get cut off?  So the question is, after you do a Restore, when you re-sync songs back to the iPod, is it always the same songs that get cut off?  Or are they different songs each time?  Try doing a Restore and re-sync several times...
    If they are the same songs, that points to a problem with the song files.  Maybe there is data corruption on your computer's hard drive, that caused the song files to become corrupted in a way that iTunes on the computer can still handle, but the iPod's software cannot.  The corrupted songs stay the same.
    If they are different songs, that points to a problem on the iPod.  If a Restore does not fix the problem, then it may be data corruption caused by the iPod's hard drive becoming unreliable.  When you do a re-sync after Restore, the data is not being stored properly on the iPod due to a hardware problem.  It randomly affects different songs each time during the re-sync

  • I use a GoPro 960 30.  When I use imovie it cuts off the feet and the head

    I am using a GoPro at 960 30
    When i use imovie it cuts off the feet and the head.
    how do I prevent that?

    Here are some things to check.
    If possible, set the aspect ratio of your project to the same aspect ratio as your camera. This will be either 16:9 or 4:3.
    If your clips or photos are not the same as your project's aspect ratio, you can select a project clip and
    click on the Rotate, Crop, Ken Burns Tool. FIT will make the movie fill out the screen by Letterboxing. Crop will cut off the edges to fill the screen.
    Finally, you may have analyzed for stabilization, and then had stabilization automatically applied in your project. Stabilization works by zooming in. You can select a project clip and open the Clip Inspector. You can turn off stabilization, or you can move the slider so there is less zoom.

  • I have a few iPods that cut off the ends of quite a few songs.  When I play the same songs on iTunes, they play through.  It's only the iPods that cut off.  What can I do to fix this?

    I have a few iPods (all nanos) that cut off the ends of quite a few songs.  When I play the same songs on iTunes, they play through.  It's only the iPods that cut off.  What can I do to fix this?

    Hi
    This is the same problem I am having, did you figure it out yet?
    Thank you

  • I am having trouble keeping the quality of my video when exporting to my external drive.  I change the kind to "original" but when I view the video from the external drive once exported, the sound and picture are distorted.

    I am having trouble keeping the quality of my video when exporting to my external hard drive.  I have tried to export from iphoto with changing kind to "original" but when I open the video from the external drive the quality is effected.  I have also tried copying the video to my desktop and then dragging and dropping onto the drive...same problem. Any suggestions?  I would like to save everything to my external drive so that I can delete all of iphoto library and then reimport to correct a few things.

    The file sizes are identical.  In the finder I did a search for all .mov files.  Then when they came up, I went through them and named each one so that they would be easier to find.  I am a new mac user and am used to windows.  I realized later that I should not have done this....with a mac files should be named within iphoto app...not finder....When I went to open the videos in iphoto, it wouldn't allow me.  I had to go into finder, copy to desktop and reimport into iphoto.  Then the videos worked again.  However, I had the problem with the poor video quality when copied to external drive before that.  Actually the first problem I had was when I copied to ext drive...videos were copying as an image...so I learned that you have to change "kind" to original before exporting....then that problem was solved...now they are videos, not images but not of a great quality.  Skips, sound and images are not in sync...etc...

  • FCP7 cutting off the end of my projects... is there a workaround?

    Really stumped on this one and thanks in advance for taking the time to read this.  My issue is that I have a 1 minute 50 project I am exporting.  Nothing fancy, just a few cuts with a bit of music.  For reasons I do not understand, FCP 7.03 exports it minus the last 10 seconds!  I am exporting in HQ 422 (30 fps) as a self-contained project as I need to pass it over to a few other people.  Worse still is I have noticed it has done this now with another project and I am investigating that as well.  It is approximately the last 10 seconds on the other project.
    I have tried resetting the I/O points, deleting the re-render files, re-rendering, adding lots of space after the last 'O' point, selecting everything etc... but have no solution.
    Other than having FCP 7.03, I have a MacBook Pro with a copious amount of memory etc..., store the data (and metadata) on an external hard drive and have quite a fair amount of experience with FCP 7.03, a little with Avid, Motion etc...
    Thanks again for having a look at this and if you have any ideas, this would be tremendous.
    What solution would you offer?

    Does it always cut off the same length, like 38 seconds, is it a percentage thing, like it always cuts off 6.4%, or is it random?

  • Captivate cuts off the end of text to speech audio sequences

    Hi there,
    I have a problem Captivates TTS audio. When I use the F3 key to check the audio sequence, everything sounds normal.
    However, after publishing the entire course as an .exe file some audio sequences are cut off at the end, e.g. using the following text “ear-phones are needed”, in the published version Paul only says “Ear-phones are NEED”.
    First, I thought that the end of the audio was too close to the end of the slide. Therefore, I made sure that every slides duration was longer than the audio. But it didn’t make a difference.
    Has anyone experienced this before and knows how to help?
    Your help is appreciated!
    I use Captivate 5, but also had this problem in version 4...

    Hello There,
    Can you try the steps mentioned in http://blogs.adobe.com/captivate/2009/04/vtml_tags_in_text_to_speech_1.html? Adding this VTML tag should be resolving the issue. Please let me know.
    Thanks,
    Vish

  • When I try to make a time lapse in lightroom it cuts off the end of the video

    In Lightroom 5, (It came with Photoshop Creative Cloud), I upload a series of photos, edit them together, then select slideshow and a Template Bowers - User Template - 23.97fps Time-lapse, downloaded from, https://www.youtube.com/redirect?q=http%3A%2F%2Flightroom-blog.com%2Fpresets%2Flrtimelapse .zip&redir_token=U79NuJdMuv4axu4RigPjzH5hxpd8MTQxNzI1NjExM0AxNDE3MTY5NzEz
    I then export the video it processes like normal. BUT when I watch it back it misses out the end of videos. I am an  A-Level Student and I need to use this for my course, please Help.
    Alex O'Sullivan

    If you have creative cloud, there is a far better way to make a time-lapse using Photoshop. The Lightroom way works but is a very slow kludge that creates files that you have to recompress to make them work. I would only use this if you don't have Photoshop or quicktime Pro. Here is the first link that shows up when I google "creating timelapse with photoshop": http://photofocus.com/2014/02/06/assembling-a-time-lapse-video-in-adobe-photoshop/

  • With the installation of IOS5 on ipfone4 ​​battery started to run out quickly. I in turn cut off the different functions, and attention when you disable geolocation battery was used as fuktsionirovat

    With the installation of IOS5 on ipfone4 ​​battery started to run out quickly. I in turn cut off thedifferent functions, and attention when you disable geolocation battery was used asfuktsionirovat

    When in Unix ( i guess u are using Oracle Application server installed in unix)
    the owner of the ias in unix is used to run this.
    Its usually oracle. try to login with oracle /the user who owns the ias and run the script
    Rajesh Alex

  • My ipod always cuts off the end of some of my songs when theyre clearly not done... Anyone having the same problem?

    My ipod is a 2nd gen ipod touch and i will go to listen a song and my ipod will cut it off when the song isnt done, like right inn the middle of it and just change to the next song. So frustrating anyway to fix it?

    mine was doing the same thing at first so I had to convert all my mp3's to ACC files using itunes. I read in the faq that itunes will sometimes not play a file properly if you did not use iTunes to encode it. it's a real pain in the *** but try to convert to ACC and it should solve the problem.

  • IMovie cuts off the bottom 10% of my video image once it is moved to the editing area.  I need the whole image. How can I solve this?

    iMovie cuts off the bottom 10% of my video image once it is moved to the editing area.  I need the whole image. How can I solve this?

    I have solved the problem by changing the Project Aspect to 4:3 rather than wide screen.

  • My servlet cuts off the rest of my jsp page on Tomcat !

    I'm using the Oracle Jdevloper 9i to create a web application. I will then deploy the application to a Tomcat server. Now here is the problem. When developing and running on the Oracle OC4J server the application works fine but after deploying to the Tomcat, my included servlet cuts off the rest of my jsp page. The page runs fine and the first servlet gets executed. After the servlet there should be more jsp code, but after the execution the servlet the remaining jsp code simply disapears. Any Idea anyone ?

    A jsp page ending abruptly looks like a runtime error happening in the included servlet.
    Try commenting the line including the servlet.
    You may also want to check for errors in the servlet by invoking the servlet alone frm the browser.

  • VISA Read Losing Characters off the end of the output string

    Hi,
    So I am writing a VI to take an output string of data from an ardunio Uno and parsing it. I am using the Read Visa vi to grab the string from output of the device. In the end I will be connecting a device that actually gives value in this type of string  format : (#80212164,2289,2292,2296,2300,2328,2289,2297,2290,2300,2308,2292,2295,2298,2289,22,24,0*).
    So after a large number of loops, the program starts to drop the last few characters of the string that it outputs. So the string output from Visa Read will read something like (#80212164,2289,2292,2296,2300,2328,2289,2297,2290,2300,2308,2292,2295,2298,2289,22,24,). The only way to fix this problem after it has occured is to completely close labview (all the way). Once I open it again and start running the program, all is fine in the world.
    Anyone ever have this issue? I have been trying to debug this in different ways and the only weird symptom that I have other than the Visa Read function losing a few characters of the string is the fact that looking at the Bytes at Port after I Visa Read, is that it starts showing five bytes instead of zero. 
    attached is my most recent attempt at solving this issue. 
    Note:  The Ardunio outputs a string of this format every 2 seconds with the values being incrimental over a specified range.(#80212164,2289,2292,2296,2300,2328,2289,2297,2290,2300,2308,2292,2295,2298,2289,22,24,0*) 
    Solved!
    Go to Solution.
    Attachments:
    Ardunio(StringOutput).vi ‏36 KB

    So i did a long data collect and It looks like ever 43minutes and 24 seconds the system goes from cutting off the last 5 characters to not cutting off the last 4 characters.
    As I cant see how Labview would be causing that, I am going to try and dig into the Ardunio and solve that issue... hopefully when thats done I can simplfy my code like you guys pointed out.
    Thanks!
    Attachments:
    overnight_11_18.csv ‏3001 KB
    Overnight.png ‏146 KB

  • IMovie Importing cuts off during video capture

    Hi!
    I am in the process of importing a video footage from my mini dv cam tape into iMovie. It seems that iMovie cuts off the video capture after 16 minutes into the duration. I have a 60-minute footage that needs to be captured for iMovie.
    Is there a time limit for video captures within iMovie?
    Any tips will be greatly appreciated.
    Thanks.

    Hi
    Can it be
    - Ken Burns effect
    - Zoom in effect
    - Image stabilization
    All of them enlarhe the picture. Turn them off
    - set Crop to ADJUST - and all will be there (letterboxed or columned)
    Yours Bengt W

Maybe you are looking for