IMovie 9 - can't open file

I uploaded my HD movie to youtube, but now its not in imovie anymore. I found it on the hard drive (.rcproject file) and moved it to my imovie projects folder on the hard drive. If i open iMovie it does not show up in my projects. If i just click on the .rcproject file name on the hard drive, nothing happens I Did another short movie saved as HD and this one shows up in my projects and in my iMovie Events folder on the hard drive as a .mov file. I even went back on time machine and seem to find anything that will restore and open. How can I get the other to open?

Nevermind! I tried a restore again and it worked. I had moved some files and I messed it up I think. All is good.

Similar Messages

"Can't open file; skipping it and continuing" Part2

I am also having a problem with iMovie 3 not being able to import my dv clip. The clip in it's entirety is about 15 minutes long, way past the 9 minute minimum. When I open the move project containing that clip it only imports the first 1.5 minutes, when I import it I get and error of -40, and knowing that it plays the entire 15+ minutes as qt movie I try to drag the clip into the time frame and get "Can't open file; skipping it and continuing". The clip works fine in iMovie HD at my computer at work. Can I try to splice the clip into smaller clips and exporting to use it at home?

http://www.danslagle.com/mac/iMovie/tips_tricks/6003.shtml

Vi error on nfs mount; E212: Can't open file for writing

Hi all,
I've setup a umask of 0 for testing on both NFS client (Centos 5.2) and NFS server (OSX 10.5.5 server).
I can create files as one user and edit/save out as another user w/o issue when directly logged into the server via ARD.
However, when I attempt the same from an NFS mount on a client machine, even as root I get the following error using vi;
"file" E212: Can't open file for writing
Looking at the system.log file on the server, I see;
kernel[0]: add_fsevent: no name hard-link! dropping the event. (event 2 vp == 0xa5db510 (-UNKNOWN-FILE)).
This baffles me. My umask is 0 meaning files I create and attempt to edit as other users are 777, but I cannot save out edits unless I do a wq! in vi. At that point, the owner of the file changes to whomever did the vi.
This isn't just a vi issue as it happens using any editor, but I like to use vi.
Any help is greatly appreciated. Hey, beer is on me!

Hi all,
Thanks for the replies
I've narrowed it down to a Centos client issue.
Everything works fine using other Linux based OS's as clients.
Since we have such a huge investment in Centos, I must figure out a workaround. Apple support wasn't much help as usual however they were very nice.
There usual response is "its unsupported".
If Apple really wants to play in the enterprise of business space, they really need to change there philosophy. I mean telling me that I shouldn't mount home directories via NFS is completely rediculus.
What am I supposed to use then, Samba of AFP? No, I don't think so. No offense to Microsoft but why would I use a Windows based file sharing protocol to mount network shares in a Nix env???

How can i open file from adobe reader..i already have adobe read

how can i open file from adobe reader..i already have adobe reader installed and cannot open a
file and i cannot convert my file into pdf..

Is the file really a PDF? Where is it? Have you tried opening it from within Reader?

Iweb installed on a new computer but i have this error message: Can't open file "~/Library/Application Support/iWeb/Domain.sites2."

I have just installed ilife on my new computer from my disk. I have several backups of my webpage from my old computer. Everything would be great if I could just run the program. When I click the icon for iWeb I get the following message: Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”
Somebody please help! I desperately need to update my website.

In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
You can download an already compiled version with this link: iWeb Switch Domain.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Error message: "Can't open file"

Using Keynote 3.0.x I try to open a keynote file created a year ago and when I try to open the "Opening" dialog comes up, you see the progress bar, and then, I get the error message, "Can’t open file" followed by the file name. Any recourse?
PowerMac G5 Mac OS X (10.4.7) FInal Cut Pro 5.1

I later discovered the file was damaged. Went back to a backup copy and things were fine. Good think we have backups.

Error message: "Can't open file "[File path, file name].key"

If I attempt to open any Keynote files, I now get this error message.
"Can't open file "[File path: file name].key"
To clarify, the text in the square brackets above would be the file path and then the file name.
The file then will appear on the screen, but is unresponsive to any clicks or menu commands.
The files will open successfully on other Macs, so they aren't corrupt.
Also - I've just checked, and opening Keynote and trying to create a new presentation leads to the same problem: All screen menus / buttons are dead - all I can do is drag the window around the screen.
I've tried to reinstall Keynote, but this hasn't resolved the problem.
Is there some corrupt preference file (or similar) that I need to get rid of? Is there an easy way to do a complete uninstall of Keynote so I can try another install? Or is this a symptom of something else?
All ideas gratefully appreciated!
Message was edited by: Brendan Donlon

All the issues I describe in my questions around this time re: Keynote were actually symptoms of a soon-to-die laptop. The Hard Disc was corrupting, and Keynote was the first application to be affected.

Can't open files in iCloud

Just recently, I haven't been able to open files stored in iCloud using either Pages or Numbers. When I try with either application, I get an error message saying, e.g., "The file “Wines.pages” couldn’t be opened." What can I do to fix that?

Possibly you have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 110 features from Pages 5 and added many bugs.
Peter

Can't open files from iCloud Drive on Mac

Hi,
Can't open file from iCloud Drive on my MacBook Air (OS X 10.10.1).
I created new file (in Numbers for example). Then Numbers->File->Open->iCloud Drive->my_file.numbers and it says "Can't open file my_file.numbers".
I can preview the file by pressing Space, but openning from application and double-click on it doesn't work.
Files that were created earlear also not opened.
Does anybody know how to solve this problem? thanks.

Using smtp.mail.me.com - also tried smtp.me.com
SSL yes
port 587
SMTP Authentification Yes
Security SLS/TLS - also tried STARTTLS
User full **@me.com email address - also tried user name without @me.com
I have spoken to apple support this afternoon and we tried the variations shown above.
Support told me to wait for a day and try again!
After the iCloud authentication problem last night I changed all my passwords I wonder if there is an SMTP problem at me.com perhaps not reading the updated passwords?
I'll try and use the old passwords later.

Pages can´t open files saved in iCloud

I can´t open any file save to iCloud
I tried a workaraound:
I couldn´t open a file save to iCloud from my iPad.
I opened it from icloud.com and downloaded it to my iMac.
Opened the downloaded file, and everything semed ok.
I then closed the dokument and opened the file on my ipad again. Made som editing before I closed the dokument.
Then I tried to open it again in Pages on my iMac, but couldent open it.
Translated: Couldn´t open the file ".... ..."
I also tried to open a file saved to icloud (without opening it on other machines and devises). Pages couldn´t open those files either...
Can sombody help me?

Possibly you have 2 versions of Pages on your Mac.
Pages 5.2 is in your Applications folder.
Pages '09/'08 is in your Applications/iWork folder.
You are alternately opening the wrong versions.
Pages '09/'08 can not open Pages 5 files and you will get the warning that you need a newer version.
Pages 5.2 can open Pages '09 files but may damage/alter them. It can not open Pages '08 files at all.
Older versions of Pages 5 can not open files from later versions of Pages 5.
Once opened and saved in Pages 5 the Pages '09 files can not be opened in Pages '09.
Anything that is saved to iCloud and opened in a newer version of Pages is also converted to Pages 5 files.
All Pages files no matter what version and incompatibility have the same extension .pages.
Pages 5 files are now only compatible with themselves on a very restricted set of hardware, software and Operating Systems and will not transfer correctly on any other server software than iCloud.
Apple has removed over 110 features from Pages 5 and added many bugs.
Peter

Can't open file "~/Library/Application Support/iWeb/Domain.sites"

I was working on iWeb today, doing the usual adding pictures, and gave a few pages some color, and a few pictures here and there.
I restart my computer, because as usual, I almost have no memory left. When the computer is running again, I opened iWeb, and I get this odd message:
Can't open file "~/Library/Application Support/iWeb/Domain.sites"
Why is this here? I didn't do anything weird to trigger such message. The site was working perfectly fine! I tried taking the domain file to the desktop, then opening it once iWeb launches from there, and same message appears. I put it back to its place, and tried putting the iWeb plist on the desktop, and same deal!
Everything is back in its place, I haven't changed or triggered anything to deserve this. I ran Onyx, full optimization update. I restarted computer, and conducted a full disk permission repairs. Only 1 error found out of another app.
My computer is healthy, my programs are running fine. What is going on? Does anyone know how I can fix this?

Hi
Whaow 3.1GB. I'm sure iWeb has problems with that. I have the same problem with my iWeb. I have about 100 BLOG pages with a lot of pictures. Although iWeb scales the pictures when publishing (good!) it does not scale them when they are stored in the domains file/dir (bad!) So if you have an 8MP camera, this adds up after a while.
You can open the comains file and try to figure out what causes the trouble. (Right click/CTRL click, open content) sort on size to see if you have some extremely large stuff in there (Movies???) Take them out and try to make them smaller.
Good luck!!
Walter

Numbers 3.0.1 - Can't open file "Work.numbers"

Hello, all Community!
Here's a iWork Numbers file, edited and successful saved yesterday to local folder, named Work.numbers.
Today this file not opening anymore. Number's says: "Can't open file ..." And just one button "OK".
In system log here's next lines:
iTrancemind # tail -F /var/log/system.log | grep Numbers
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3022
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3019
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 468721
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Error: -[TSPReader runReferenceCompletions] TSPReader.mm:564 No object unarchived for identifier 3022
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #1: __97-[TSPObjectContext readWithReadCoordinator:finalizeHandlerQueue:rootObject:error:readCompletion:]_block_invoke TSPObjectContext.mm:1129 Could not read document object with error: Error Domain=com.apple.iWork.TSPersistence Code=1 "Произошла ошибка при чтении документа." UserInfo=0x600001069600 {NSLocalizedDescription=Произошла ошибка при чтении документа., TSULocalizedErrorAlertTitle=Произошла ошибка при чтении документа.}
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #2: -[TSADocumentRoot dealloc] TSADocumentRoot.mm:246 Someone neglected to call -willClose on the document before releasing it.
Dec 30 17:31:23 iTrancemind.local Numbers[2446]: *** Assertion failure #3: -[TSADocumentRoot dealloc] TSADocumentRoot.mm:246 Someone neglected to call -willClose on the document before releasing it.
What I done to try resolve this problem:
1. Checked permissions and repaired.
2. Tried to open file in iCloud web-editor - no result. iCloud says that it can't open this spreadsheet.
3. Tried to convert file via some online file type converters to xls document (i will not put link here). Converter says that I have wrong file format.
Also I tried to open file in some other programs. No luck.
That's all.
File Work.numbers has been closed correctly and was no errors. Unfortunately, we have no any backup copy of this file anywhere. I know, this is stupid, but question now: How can I repair this document? Is any repair tools for iWork files?
The file seems like has right structure.
iTrancemind # ls -la Work.numbers/
total 4776
drwxr-xr-x@ 8 max staff      272 30 дек 16:44 .
drwx------+ 19 max staff      646 30 дек 17:53 ..
drwxr-xr-x@ 2 max staff       68 30 дек 00:28 Data
-rw-rw-rw-@ 1 max staff 2306978 30 дек 00:28 Index.zip
drwxr-xr-x   5 max staff      170 30 дек 14:47 Metadata
-rw-r--r--@ 1 max staff     1690 30 дек 00:31 preview-micro.jpg
-rw-r--r--@ 1 max staff    13602 30 дек 00:31 preview-web.jpg
-rw-r--r--@ 1 max staff   112911 30 дек 00:31 preview.jpg
Unzipping Index.zip is passing without errors. It has many "iwa" files with binnary content and I can't get data from it. But, data in that file is very important for one person.
Could anybody help me to resolve my problem to restore Numbers document?

Hi rabg,
I am using OS X 10.8 on a Mac. This may be different if you are using iOS.
Does Numbers'09 still exist in your Applications folder? Maybe inside a new folder? Perhaps you could use Numbers'09 to open your documents.
Regards,
Ian.

Indesign 7.0.3 "can't open file"

Getting an error in InDesign. "Can't open file as it is not an InDesign file, a plug in is missing, or it is open by another user."
We get this error, it goes away, and then returns. Could happen on a file we've just had open!
The file(s) in question are InDesign (CS5 7.0.3) files.
No plug ins are missing.
And it is not open by another user.
Hardware Info:
Model Name: Mac Pro
Model Identifier: MacPro4,1
Processor Name: Quad-Core Intel Xeon
Processor Speed: 2.66 GHz
Number Of Processors: 1
Total Number Of Cores: 4
L2 Cache (per core): 256 KB
L3 Cache: 8 MB
Memory: 6 GB
Processor Interconnect Speed: 4.8 GT/s
Boot ROM Version: MP41.0081.B07
Any clues anyone as to the issue? Repair/Workaround other than a complete re-install?
Thanks for any help!
-S.

Opening file from server.
Deleting temp file didn't resolve.
Moving to desktop didn't resolve.
Further details: This problem originates on 1 computer (out of 4). If that computer opens (or tries to open) a file, then the file becomes corrupt for all.
Thanks!
-S.

[Solved][VIM] E484: Can't open file syntax.vim

Hi all,
I've installed Archlinux few days ago on my netbook and yesterday i decided to configure Vim using plugins.
During plugins configuration, i messed up and i decided to revome all Vim files in my ~ folder in order to restart configuration.
However, since I've executed the `rm -R .vim .vimrc .viminfo` command, I can't re-activate Vim's syntax coloration using `syntax on` into my .vimrc file nor into Vim directly.
Here is the error message when I start Vim :
Error detected while processing /home/romain/.vimrc:
line 1:
E484: Can't open file /home/romain/.vim/syntax/syntax.vim
Press ENTER or type command to continue
I've found this topic on BBS which seems to be the same problem as me but reinstalling vim or vi doesn't solve this problem.
I've tried to copy this syntax.vim file from /usr/share/vim/vim73/syntax/syntax.vim but it doesn't solve the problem and I want a clean solution without hacking my ~ folder ; moreover, this bug also appears being root while I haven't configured vim with the root account so it may be a problem into Vim's installation folders or something.
Thanks for your help and sorry I my english contains mistakes,
MicroJoe.
Last edited by MicroJoe (2012-06-14 16:16:45)

This is the output :
VIM - Vi IMproved 7.3 (2010 Aug 15, compiled Jun 7 2012 00:41:40)
Rustines incluses : 1-547
Compilé par ArchLinux
Grosse version sans interface graphique.
Fonctionnalités incluses (+) ou non (-) :
+arabic +autocmd -balloon_eval -browse ++builtin_terms +byte_offset +cindent
-clientserver -clipboard +cmdline_compl +cmdline_hist +cmdline_info +comments
+conceal +cryptv +cscope +cursorbind +cursorshape +dialog_con +diff +digraphs
-dnd -ebcdic +emacs_tags +eval +ex_extra +extra_search +farsi +file_in_path
+find_in_path +float +folding -footer +fork() +gettext -hangul_input +iconv
+insert_expand +jumplist +keymap +langmap +libcall +linebreak +lispindent
+listcmds +localmap -lua +menu +mksession +modify_fname +mouse -mouseshape
+mouse_dec +mouse_gpm -mouse_jsbterm +mouse_netterm -mouse_sysmouse
+mouse_xterm +mouse_urxvt +multi_byte +multi_lang -mzscheme -netbeans_intg
+path_extra +perl +persistent_undo +postscript +printer -profile -python
-python3 +quickfix +reltime +rightleft -ruby +scrollbind +signs +smartindent
-sniff +startuptime +statusline -sun_workshop +syntax +tag_binary
+tag_old_static -tag_any_white -tcl +terminfo +termresponse +textobjects +title
-toolbar +user_commands +vertsplit +virtualedit +visual +visualextra +viminfo
+vreplace +wildignore +wildmenu +windows +writebackup -X11 -xfontset -xim -xsmp
-xterm_clipboard -xterm_save
fichier vimrc système : "/etc/vimrc"
fichier vimrc utilisateur : "$HOME/.vimrc"
fichier exrc utilisateur : "$HOME/.exrc"
$VIM par défaut : "/usr/share/vim"
Compilation : gcc -c -I. -Iproto -DHAVE_CONFIG_H -I/usr/local/include -march=i686 -mtune=generic -pipe -fstack-protector --param=ssp-buffer-size=4 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=1
Édition de liens : gcc -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -L/usr/local/lib -Wl,--as-needed -o vim -lm -lncurses -lacl -lattr -lgpm -ldl -Wl,-E -Wl,-rpath,/usr/lib/perl5/core_perl/CORE -Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu -fstack-protector -L/usr/local/lib -L/usr/lib/perl5/core_perl/CORE -lperl -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
(I've noticed that some part were in French but I hope that it'll not be a problem).

Can't open file "~/Library/Application Support/iWeb/Domain.sites2."

Hello,
I have been using iWeb for over a year and I have a lot of my work on it. But for some reason, when I went to open iWeb, I get the error message:
+Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”+
Does anyone know how I can fix this and make sure my content doesn't get deleted?
Thank You!

Deleting the preference file does not affect the domain.sites2 file. If it's not in the default folder or has a name other than domain.sites2 then that's why iWeb couldn't find and open it. Find it and double-click on it to open it with iWeb 2. You do have a backup copy the domain file, right? If not download and use frequently the Automator application that Varkgirl created. You can get it at Varkgirl's iWeb Tips and Tricks site.

Error: can't open file (-43)

Hi Guys,
I am a newbie to iphone development....I was trying my hand on audio recording module using apple SpeakHere demo....
The problem is that I want to save the audio file in NSDocumentDirectory and want to playback the audio recorded from there...
But if i am changing the path from NNSTemporaryDirectory to NSDocumentDirectory i got error stating "can't open file (-43)".
I searched forum , but did not found any satisfactory answer...Can any body please tell me a way how to overcome this error.
Waiting for your valuable suggestion.
Thanks in advance
Quest.

It would be best to post a little example code showing where your problem is.

IMovie 9 - can't open file

Similar Messages

Maybe you are looking for