IMovie help for a newbie
I am new to the Mac world and could use some help. I am attempting to upload a video I shoot using the built in camera on iMovie to Vimeo. I cannot get the audio to sync with the video on Vimeo. I know there are specific settings I should have...but...as a newbie to Mac, I have no idea where to go to make those changes to try to get this to work properly.
Any help on how to change the settings of my video and get the problem fixed?
I would try to separate the audio from the clip then sync it. I have never had you problem though.
Similar Messages
-
MBP was hacked? Help for a Newbie.
Hi everyone. I think my WEP was cracked and my MBP was hacked. WEP was cracked because the lock is gone. Tried to restart, sorry don't have access to router to restart that or confirm connections on that hardware. Connecting to MBP via airport. Have been in system preferences and attempted to re-connect with WEP passowrd. I've learned online that WEP2 is better, so lesson learned. If I post the netstat commands I ran would you be able to tell me if my system has been hacked? From my newbie knowledge of how to read netstat I thinkit was- There have been connections to open port numbers in the 5000 range from which I have read online is an alert. Also, I do not recognize the ip addresses or hostnames and also I see files were sent and received. I've run Mac Scan trial version - but from my knowledge this does not confirm connections to my computer from an ulocked airport connection. Additionally, all of a sudden I have theDS_Store on my system, is this an indicator of a hack. Sorry guys and gals for all the Q's.If this is the incorrect forum for the question could you kindly point me to where I would ask this. Thanks for any help. JO
Thanks people. I xed out some info I think is personal ip or isp - let me know if you needed this info. i called it my ip but maybe it is my isp - in any case, it starts with 192. Let me know also if i posted too much info.
netstat - It's alot of info. on the internet I see amazon web servers is Ec2 is this- and from what I read this is a way to transfer files.
Today I closed all browsers, and ran netstst -n and netstat.
as I noticed other times I ran and lookedup the ip address that they were browser tabs that I had opened (makes sense- it's reading what my computer is connected to).....
Thanks guys.and if i was hacked should I take computer to genius bar or police?
- JO
From today
netstat -n
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 2119 XXXXXXXXX2.54750 74.125.224.181.443 ESTABLISHED
tcp4 0 0 XXXXXXXXX2.54749 74.125.224.181.443 ESTABLISHED
tcp4 0 0 XXXXXXXXX2.54748 74.125.224.189.443 ESTABLISHED
tcp4 0 201 XXXXXXXXX2.54747 75.11XXXXXX.108.134.443 ESTABLISHED
tcp4 0 0 XXXXXXXXX2.54745 199.47.217.177.443 ESTABLISHED
tcp4 0 0 XXXXXXXXX2.54741 199.47.216.144.80 ESTABLISHED
tcp4 37 0 XXXXXXXXX6.54707 107.20.249.252.443 CLOSE_WAIT
tcp4 37 0 XXXXXXXXX6.54706 107.20.249.104.443 CLOSE_WAIT
tcp4 37 0 XXXXXXXXX6.54705 199.47.216.172.443 CLOSE_WAIT
tcp4 37 0 XXXXXXXXX6.54702 199.47.217.178.443 CLOSE_WAIT
tcp4 37 0 10.0.1.6.54521 199.47.216.173.443 CLOSE_WAIT
tcp4 0 0 127.0.0.1.26165 127.0.0.1.50379 ESTABLISHED
tcp4 0 0 127.0.0.1.50379 127.0.0.1.26165 ESTABLISHED
tcp4 37 0 10.0.1.6.49394 107.20.249.164.443 CLOSE_WAIT
tcp4 0 0 XXXXXXXXX2.54743 69.58.188.38.443 TIME_WAIT
tcp4 0 0 XXXXXXXXX2.54744 199.59.148.10.80 TIME_WAIT
tcp4 0 0 XXXXXXXXX2.54742 69.58.188.38.443 TIME_WAIT
tcp4 0 0 XXXXXXXXX2.54724 74.125.224.243.443 TIME_WAIT
udp4 0 0 *.* *.*
udp6 0 0 *.60916 *.*
udp4 0 0 *.60916 *.*
udp4 0 0 XXXXXXXXX2.123 *.*
udp6 0 0 *.53780 *.*
udp4 0 0 *.53780 *.*
udp6 0 0 *.62813 *.*
udp4 0 0 *.62813 *.*
udp6 0 0 *.63440 *.*
udp4 0 0 *.63440 *.*
udp6 0 0 *.56188 *.*
udp4 0 0 *.56188 *.*
udp6 0 0 *.55626 *.*
udp4 0 0 *.55626 *.*
udp6 0 0 *.56269 *.*
udp4 0 0 *.56269 *.*
udp6 0 0 fe80::e2f8:47ff:.123 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.17500 *.*
udp4 0 0 127.0.0.1.123 *.*
udp6 0 0 fe80::1%lo0.123 *.*
udp6 0 0 ::1.123 *.*
udp6 0 0 *.123 *.*
udp4 0 0 *.123 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp6 0 0 *.5353 *.*
udp4 0 0 *.5353 *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
icm4 0 0 *.* *.*
icm6 0 0 *.* *.*
Active LOCAL (UNIX) domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
ffffff80119bc700 stream 0 0 0 ffffff80119baa80 0 0 /var/run/mDNSResponder
ffffff80119baa80 stream 0 0 0 ffffff80119bc700 0 0
ffffff80119ba900 stream 0 0 0 ffffff80119bba40 0 0
ffffff80119bba40 stream 0 0 0 ffffff80119ba900 0 0
ffffff800d9c52c0 stream 0 0 0 0 0 0
ffffff800d9c4600 stream 0 0 0 ffffff80119bad80 0 0 /var/run/mDNSResponder
ffffff80119bad80 stream 0 0 0 ffffff800d9c4600 0 0
ffffff800d9c5b00 stream 0 0 0 ffffff800c369d40 0 0 /var/run/mDNSResponder
ffffff800c369d40 stream 0 0 0 ffffff800d9c5b00 0 0
ffffff800c369c80 stream 0 0 0 0 0 0
ffffff80119bcf40 stream 0 0 0 ffffff80119bce80 0 0 /.dbfseventsd
ffffff80119bce80 stream 0 0 0 ffffff80119bcf40 0 0
ffffff800d9c4000 stream 0 0 ffffff800fcd81f0 0 0 0 /.dbfseventsd
ffffff800bda9540 stream 0 0 0 ffffff800d9c4fc0 0 0
ffffff800d9c4fc0 stream 0 0 0 ffffff800bda9540 0 0
ffffff800d9c4300 stream 0 0 0 ffffff800d9c4240 0 0 /tmp/launchd-95.uZCVf1/sock
ffffff800d9c4240 stream 0 0 0 ffffff800d9c4300 0 0
ffffff800d9c43c0 stream 0 0 0 ffffff800d9c4480 0 0
ffffff800d9c4480 stream 0 0 0 ffffff800d9c43c0 0 0
ffffff800d9c5140 stream 0 0 0 ffffff800d9c5080 0 0 /var/run/mDNSResponder
ffffff800d9c5080 stream 0 0 0 ffffff800d9c5140 0 0
ffffff800c36a100 stream 0 0 0 ffffff800bda9600 0 0 /var/run/mDNSResponder
ffffff800bda9600 stream 0 0 0 ffffff800c36a100 0 0
ffffff800c369bc0 stream 0 0 0 ffffff800bda9cc0 0 0 /var/tmp/launchd/sock
ffffff800bda9cc0 stream 0 0 0 ffffff800c369bc0 0 0
ffffff800c368840 stream 0 0 0 ffffff800d9c6940 0 0 /var/run/mDNSResponder
ffffff800d9c6940 stream 0 0 0 ffffff800c368840 0 0
ffffff800bdaa200 stream 0 0 0 ffffff800bdaa140 0 0 /var/run/mDNSResponder
ffffff800bdaa140 stream 0 0 0 ffffff800bdaa200 0 0
ffffff800d9c5e00 stream 0 0 0 ffffff800d9c5ec0 0 0 /var/run/usbmuxd
ffffff800d9c5ec0 stream 0 0 0 ffffff800d9c5e00 0 0
ffffff800d9c5f80 stream 0 0 0 ffffff800d9c6040 0 0 /var/run/mDNSResponder
ffffff800d9c6040 stream 0 0 0 ffffff800d9c5f80 0 0
ffffff800d9c6100 stream 0 0 0 ffffff800d9c61c0 0 0 /var/run/mDNSResponder
ffffff800d9c61c0 stream 0 0 0 ffffff800d9c6100 0 0
ffffff800d9c6280 stream 0 0 0 ffffff800d9c6340 0 0 /var/run/mDNSResponder
ffffff800d9c6340 stream 0 0 0 ffffff800d9c6280 0 0
ffffff800d9c6400 stream 0 0 0 ffffff800d9c64c0 0 0 /var/run/mDNSResponder
ffffff800d9c64c0 stream 0 0 0 ffffff800d9c6400 0 0
ffffff800c36ab80 stream 0 0 0 ffffff800bda9300 0 0 /var/run/mDNSResponder
ffffff800bda9300 stream 0 0 0 ffffff800c36ab80 0 0
ffffff800c36a1c0 stream 0 0 0 ffffff800c369140 0 0 /var/run/mDNSResponder
ffffff800c369140 stream 0 0 0 ffffff800c36a1c0 0 0
ffffff800d9c6700 stream 0 0 0 ffffff800d9c6880 0 0 /var/run/mDNSResponder
ffffff800d9c6880 stream 0 0 0 ffffff800d9c6700 0 0
ffffff800c368900 stream 0 0 ffffff800de9a550 0 0 0 /tmp/icssuis502
ffffff800c3692c0 stream 0 0 0 ffffff800c369ec0 0 0 /var/run/mDNSResponder
ffffff800c369ec0 stream 0 0 0 ffffff800c3692c0 0 0
ffffff800d9c6e80 stream 0 0 0 ffffff800d9c6d00 0 0 /var/run/usbmuxd
ffffff800d9c6d00 stream 0 0 0 ffffff800d9c6e80 0 0
ffffff800c3683c0 stream 0 0 0 ffffff800c368540 0 0 /var/run/mDNSResponder
ffffff800c368540 stream 0 0 0 ffffff800c3683c0 0 0
ffffff800bdaa080 stream 0 0 0 ffffff800bda9d80 0 0 /var/run/mDNSResponder
ffffff800bda9d80 stream 0 0 0 ffffff800bdaa080 0 0
ffffff800bda9480 stream 0 0 0 ffffff800bda9780 0 0 /var/run/mDNSResponder
ffffff800bda9780 stream 0 0 0 ffffff800bda9480 0 0
ffffff800bda9000 stream 0 0 0 ffffff800c36a580 0 0
ffffff800c36a580 stream 0 0 0 ffffff800bda9000 0 0
ffffff800c36a280 stream 0 0 0 ffffff800c36ad00 0 0
ffffff800c36ad00 stream 0 0 0 ffffff800c36a280 0 0
ffffff800c36aa00 stream 0 0 0 ffffff800c36a880 0 0
ffffff800c36a880 stream 0 0 0 ffffff800c36aa00 0 0
ffffff800c369b00 stream 0 0 0 ffffff800c369500 0 0
ffffff800c369500 stream 0 0 0 ffffff800c369b00 0 0
ffffff800c369f80 stream 0 0 ffffff800d57f1f0 0 0 0 /tmp/launch-Uw8Fqt/org.x:0
ffffff800c368cc0 stream 0 0 ffffff800d57f3e0 0 0 0 /tmp/launch-5PRrer/Listeners
ffffff800c369680 stream 0 0 ffffff800d57f5d0 0 0 0 /tmp/launch-JsZCof/Render
ffffff800c369080 stream 0 0 ffffff800d57fe88 0 0 0 /tmp/launchd-95.uZCVf1/sock
ffffff800c369800 stream 0 0 0 ffffff800c369380 0 0
ffffff800c369380 stream 0 0 0 ffffff800c369800 0 0
ffffff800c368d80 stream 0 0 0 ffffff800c369440 0 0
ffffff800c369440 stream 0 0 0 ffffff800c368d80 0 0
ffffff800c368fc0 stream 0 0 0 ffffff800c369740 0 0
ffffff800c369740 stream 0 0 0 ffffff800c368fc0 0 0
ffffff800c36aac0 stream 0 0 0 ffffff800bdaa2c0 0 0
ffffff800bdaa2c0 stream 0 0 0 ffffff800c36aac0 0 0
ffffff800bdaa680 stream 0 0 0 ffffff800bda9b40 0 0
ffffff800bda9b40 stream 0 0 0 ffffff800bdaa680 0 0
ffffff800bda99c0 stream 0 0 0 ffffff800bda9240 0 0 /var/run/mDNSResponder
ffffff800bda9240 stream 0 0 0 ffffff800bda99c0 0 0
ffffff800bda96c0 stream 0 0 0 ffffff800c36a4c0 0 0
ffffff800c36a4c0 stream 0 0 0 ffffff800bda96c0 0 0
ffffff800c368e40 stream 0 0 ffffff800c57fc98 0 0 0 /var/run/pppconfd
ffffff800c36a340 stream 0 0 0 ffffff800c36a400 0 0
ffffff800c36a400 stream 0 0 0 ffffff800c36a340 0 0
ffffff800c36a640 stream 0 0 0 ffffff800c36a700 0 0
ffffff800c36a700 stream 0 0 0 ffffff800c36a640 0 0
ffffff800c36adc0 stream 0 0 0 ffffff800c36ae80 0 0
ffffff800c36ae80 stream 0 0 0 ffffff800c36adc0 0 0
ffffff800bda90c0 stream 0 0 0 ffffff800bda9180 0 0
ffffff800bda9180 stream 0 0 0 ffffff800bda90c0 0 0
ffffff800bda9840 stream 0 0 0 ffffff800bda9900 0 0
ffffff800bda9900 stream 0 0 0 ffffff800bda9840 0 0
ffffff800bda9e40 stream 0 0 0 ffffff800bda9f00 0 0
ffffff800bda9f00 stream 0 0 0 ffffff800bda9e40 0 0
ffffff800bdaa800 stream 0 0 0 ffffff800bdaa740 0 0
ffffff800bdaa740 stream 0 0 0 ffffff800bdaa800 0 0
ffffff800bdaa8c0 stream 0 0 0 ffffff800bdaa980 0 0
ffffff800bdaa980 stream 0 0 0 ffffff800bdaa8c0 0 0
ffffff800bdaab00 stream 0 0 0 ffffff800bdaaa40 0 0 /var/tmp/launchd/sock
ffffff800bdaaa40 stream 0 0 0 ffffff800bdaab00 0 0
ffffff800bdaabc0 stream 0 0 0 ffffff800bdaac80 0 0
ffffff800bdaac80 stream 0 0 0 ffffff800bdaabc0 0 0
ffffff800bdaae00 stream 0 0 0 ffffff800bdaad40 0 0 /var/tmp/launchd/sock
ffffff800bdaad40 stream 0 0 0 ffffff800bdaae00 0 0
ffffff800bdaaf80 stream 0 0 0 ffffff800bdaaec0 0 0
ffffff800bdaaec0 stream 0 0 0 ffffff800bdaaf80 0 0
ffffff800bdab100 stream 0 0 0 ffffff800bdab040 0 0
ffffff800bdab040 stream 0 0 0 ffffff800bdab100 0 0
ffffff800bdab280 stream 0 0 0 ffffff800bdab1c0 0 0
ffffff800bdab1c0 stream 0 0 0 ffffff800bdab280 0 0
ffffff800bdab400 stream 0 0 0 ffffff800bdab340 0 0
ffffff800bdab340 stream 0 0 0 ffffff800bdab400 0 0
ffffff800bdab4c0 stream 0 0 0 ffffff800bdab580 0 0
ffffff800bdab580 stream 0 0 0 ffffff800bdab4c0 0 0
ffffff800bdab7c0 stream 0 0 ffffff800c110740 0 0 0 /var/tmp/launchd/sock
ffffff800bdab880 stream 0 0 ffffff800c110930 0 0 0 /private/var/run/cupsd
ffffff800bdab940 stream 0 0 ffffff800c110c18 0 0 0 /var/run/usbmuxd
ffffff800bdabac0 stream 0 0 ffffff800c110e08 0 0 0 /var/run/asl_input
ffffff800bdabb80 stream 0 0 ffffff800c110f00 0 0 0 /var/run/SCHelper
ffffff800bdabc40 stream 0 0 ffffff800c0f6000 0 0 0 /var/run/vpncontrol.sock
ffffff800bdabd00 stream 0 0 ffffff800c0f60f8 0 0 0 /private/var/run/printtool
ffffff800bdabdc0 stream 0 0 ffffff800c0f61f0 0 0 0 /var/run/portmap.socket
ffffff800bdabf40 stream 0 0 ffffff800c0f62e8 0 0 0 /var/run/mDNSResponder
ffffff800bdabe80 stream 0 0 ffffff800c0f63e0 0 0 0 /var/run/com.apple.ActivityMonitor.socket
ffffff80119bca00 dgram 0 0 0 ffffff80119bbd40 ffffff80119bbd40 0
ffffff80119bbd40 dgram 0 0 0 ffffff80119bca00 ffffff80119bca00 0
ffffff80119bb680 dgram 0 0 0 ffffff80119bc7c0 ffffff80119bc7c0 0
ffffff80119bc7c0 dgram 0 0 0 ffffff80119bb680 ffffff80119bb680 0
ffffff800d9c5980 dgram 0 0 0 ffffff800bda9fc0 ffffff800bda9fc0 0
ffffff800bda9fc0 dgram 0 0 0 ffffff800d9c5980 ffffff800d9c5980 0
ffffff800d9c6ac0 dgram 0 0 0 ffffff800d9c4cc0 ffffff800d9c4cc0 0
ffffff800d9c4cc0 dgram 0 0 0 ffffff800d9c6ac0 ffffff800d9c6ac0 0
ffffff800d9c4540 dgram 0 0 0 ffffff800d9c4f00 ffffff800d9c4f00 0
ffffff800d9c4f00 dgram 0 0 0 ffffff800d9c4540 ffffff800d9c4540 0
ffffff800d9c6580 dgram 0 0 0 ffffff800d9c6640 ffffff800d9c6640 0
ffffff800d9c6640 dgram 0 0 0 ffffff800d9c6580 ffffff800d9c6580 0
ffffff800c368180 dgram 0 0 0 ffffff800d9c6b80 ffffff800d9c6b80 0
ffffff800d9c6b80 dgram 0 0 0 ffffff800c368180 ffffff800c368180 0
ffffff800d9c6a00 dgram 0 0 0 ffffff800c368000 ffffff800c368000 0
ffffff800c368000 dgram 0 0 0 ffffff800d9c6a00 ffffff800d9c6a00 0
ffffff800c3686c0 dgram 0 0 0 ffffff800d9c6dc0 ffffff800d9c6dc0 0
ffffff800d9c6dc0 dgram 0 0 0 ffffff800c3686c0 ffffff800c3686c0 0
ffffff800c3689c0 dgram 0 0 0 ffffff800c368a80 ffffff800c368a80 0
ffffff800c368a80 dgram 0 0 0 ffffff800c3689c0 ffffff800c3689c0 0
ffffff800bda9c00 dgram 0 0 0 ffffff800bda9a80 ffffff800bda9a80 0
ffffff800bda9a80 dgram 0 0 0 ffffff800bda9c00 ffffff800bda9c00 0
ffffff800c3698c0 dgram 0 0 0 ffffff800c36a7c0 ffffff800c36a7c0 0
ffffff800c36a7c0 dgram 0 0 0 ffffff800c3698c0 ffffff800c3698c0 0
ffffff800c36af40 dgram 0 0 0 ffffff800c36a040 ffffff800c36a040 0
ffffff800c36a040 dgram 0 0 0 ffffff800c36af40 ffffff800c36af40 0
ffffff800bda93c0 dgram 0 0 0 ffffff800c36a940 ffffff800c36a940 0
ffffff800c36a940 dgram 0 0 0 ffffff800bda93c0 ffffff800bda93c0 0
ffffff800bdaa440 dgram 0 0 0 ffffff800bdaa500 ffffff800bdaa500 0
ffffff800bdaa500 dgram 0 0 0 ffffff800bdaa440 ffffff800bdaa440 0
ffffff800bdaba00 dgram 0 0 ffffff800c110d10 0 0 0 /var/run/syslog
from today
netstat
Active Internet connections
Proto Recv-Q Send-Q Local Address Foreign Address (state)
tcp4 0 2119 XXXXXXXXX.2.54746 lax02s01-in-f21..https ESTABLISHED
tcp4 0 762 XXXXXXXXX.2.54745 v-d-1b.sjc.dropb.https ESTABLISHED
tcp4 0 0 XXXXXXXXX.2.54741 sjc-not1.sjc.dro.http ESTABLISHED
tcp4 37 0 XXXXXXXXX.6.54707 ec2-107-20-249-2.https CLOSE_WAIT
tcp4 37 0 XXXXXXXXX.6.54706 ec2-107-20-249-1.https CLOSE_WAIT
tcp4 37 0 XXXXXXXXX.6.54705 v-client-1a.sjc..https CLOSE_WAIT
tcp4 37 0 XXXXXXXXX.6.54702 199.47.217.178.https CLOSE_WAIT
tcp4 37 0 10.0.1.6.54521 v-client-2a.sjc..https CLOSE_WAIT
tcp4 0 0 localhost.26165 localhost.50379 ESTABLISHED
tcp4 0 0 localhost.50379 localhost.26165 ESTABLISHED
tcp4 37 0 10.0.1.6.49394 ec2-107-20-249-1.https CLOSE_WAIT
tcp4 0 0 XXXXXXXXX.2.54743 69.58.188.38.https TIME_WAIT
tcp4 0 0 XXXXXXXXX.2.54725 lax04s08-in-f19..https TIME_WAIT
tcp4 0 0 XXXXXXXXX.2.54744 r-199-59-148-10..http TIME_WAIT
tcp4 0 0 XXXXXXXXX.2.54742 69.58.188.38.https TIME_WAIT
tcp4 0 0 XXXXXXXXX.2.54724 lax04s08-in-f19..https TIME_WAIT
udp4 0 0 XXXXXXXXX.2.ntp *.*
udp6 0 0 *.53780 *.*
udp4 0 0 *.53780 *.*
udp6 0 0 *.62813 *.*
udp4 0 0 *.62813 *.*
udp6 0 0 *.63440 *.*
udp4 0 0 *.63440 *.*
udp6 0 0 *.56188 *.*
udp4 0 0 *.56188 *.*
udp6 0 0 *.55626 *.*
udp4 0 0 *.55626 *.*
udp6 0 0 *.56269 *.*
udp4 0 0 *.56269 *.*
udp6 0 0 sp.ntp *.*
udp4 0 0 *.* *.*
udp4 0 0 *.17500 *.*
udp4 0 0 localhost.ntp *.*
udp6 0 0 localhost.ntp *.*
udp6 0 0 localhost.ntp *.*
udp6 0 0 *.ntp *.*
udp4 0 0 *.ntp *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
udp6 0 0 *.mdns *.*
udp4 0 0 *.mdns *.*
udp4 0 0 *.* *.*
udp4 0 0 *.* *.*
icm4 0 0 *.* *.*
icm6 0 0 *.* *.*
Active LOCAL (UNIX) domain sockets
Address Type Recv-Q Send-Q Inode Conn Refs Nextref Addr
ffffff80119bba40 stream 0 0 0 ffffff80119ba900 0 0
ffffff80119ba900 stream 0 0 0 ffffff80119bba40 0 0
ffffff800d9c4180 stream 0 0 0 ffffff800c369a40 0 0 /var/tmp/launchd/sock
ffffff800c369a40 stream 0 0 0 ffffff800d9c4180 0 0
ffffff800c369200 stream 0 0 0 ffffff800d9c40c0 0 0
ffffff800d9c40c0 stream 0 0 0 ffffff800c369200 0 0
ffffff800c369980 stream 0 0 0 ffffff800d9c52c0 0 0 /private/var/run/cupsd
ffffff800d9c52c0 stream 0 0 0 ffffff800c369980 0 0
ffffff80119bc700 stream 0 0 0 ffffff80119baa80 0 0 /var/run/mDNSResponder
ffffff80119baa80 stream 0 0 0 ffffff80119bc700 0 0
ffffff800d9c4600 stream 0 0 0 ffffff80119bad80 0 0 /var/run/mDNSResponder
ffffff80119bad80 stream 0 0 0 ffffff800d9c4600 0 0
ffffff800d9c5b00 stream 0 0 0 ffffff800c369d40 0 0 /var/run/mDNSResponder
ffffff800c369d40 stream 0 0 0 ffffff800d9c5b00 0 0
ffffff800c369c80 stream 0 0 0 0 0 0
ffffff80119bcf40 stream 0 0 0 ffffff80119bce80 0 0 /.dbfseventsd
ffffff80119bce80 stream 0 0 0 ffffff80119bcf40 0 0
ffffff800d9c4000 stream 0 0 ffffff800fcd81f0 0 0 0 /.dbfseventsd
ffffff800bda9540 stream 0 0 0 ffffff800d9c4fc0 0 0
ffffff800d9c4fc0 stream 0 0 0 ffffff800bda9540 0 0
ffffff800d9c4300 stream 0 0 0 ffffff800d9c4240 0 0 /tmp/launchd-95.uZCVf1/sock
ffffff800d9c4240 stream 0 0 0 ffffff800d9c4300 0 0
ffffff800d9c43c0 stream 0 0 0 ffffff800d9c4480 0 0
ffffff800d9c4480 stream 0 0 0 ffffff800d9c43c0 0 0
ffffff800d9c5140 stream 0 0 0 ffffff800d9c5080 0 0 /var/run/mDNSResponder
ffffff800d9c5080 stream 0 0 0 ffffff800d9c5140 0 0
ffffff800c36a100 stream 0 0 0 ffffff800bda9600 0 0 /var/run/mDNSResponder
ffffff800bda9600 stream 0 0 0 ffffff800c36a100 0 0
ffffff800c369bc0 stream 0 0 0 ffffff800bda9cc0 0 0 /var/tmp/launchd/sock
ffffff800bda9cc0 stream 0 0 0 ffffff800c369bc0 0 0
ffffff800c368840 stream 0 0 0 ffffff800d9c6940 0 0 /var/run/mDNSResponder
ffffff800d9c6940 stream 0 0 0 ffffff800c368840 0 0
ffffff800bdaa200 stream 0 0 0 ffffff800bdaa140 0 0 /var/run/mDNSResponder
ffffff800bdaa140 stream 0 0 0 ffffff800bdaa200 0 0
ffffff800d9c5e00 stream 0 0 0 ffffff800d9c5ec0 0 0 /var/run/usbmuxd -
I am a longtime BB customer and am finally taking the HDTV plunge. I have narrowed it down a bit to the Insignia NS-L37Q (32" is too small, 40" is too big) versus a Dynex DX-37L150A11. I am not a cinephile so the basic features are fine with me and the price is right (I am a cheapskate). It is a 37", 1080p LCD HDTV. This is for basic TV, sports, DVD viewing. Please indulge a few newbie questions.
1) The one small reservation I have is the Insignia's native contrast ratio at 1400:1 and brightness 500/cd/m2. Should I be concerned that it isn't high enough? I note the Dynex 37" in the same price range is 4000:1 but 450/cd/m2.
2) I have DISH satellite but may switch to DirectTV but assume both are similar. I assume I'll need a special HDTV box from them, correct? And HDMI cable to connect from box to set?
3) I have never bought a service plan in my life but am considering one for this. The Insignia already comes with a 2 year warrenty and this extends it to 4 as I understand it. Is $89 on a $549 LCD worth it? I'll be ticked if a pixel goes out in the middle of the screen, but does "burn in" still even happen on these units?
4) I run the DVD player through my stereo currently (because I am too cheap to buy home theatre sound) so would I just hook that up the same way through the audio inputs? I understand it won't be digital or anything.
5) It has 3:2 inverse pulldown. Is that good and why should I care?
Any help from the experts here is greatly appreciated.
Solved!
Go to Solution.I would recommend the Insignia, as both are Best Buy house brands but I've noticed better image quality and reliability with the Insignia's as opposed to the Dynex tv's.
1) While the Dynex has the better contrast ratio, the difference between 1400:1 and 4000:1 is not very staggering. Disregard this comparison.
2) Yes you will need a set-top-box from DirecTV, fortunately you can pick these boxes up at the store and can subscribe to your DirecTV account while you shop.
3) $89 for 2 years of peace of mind on an LCD tv is worth it, though I don't think it extends the contract to 4 years, rather, the service plan covers "normal wear and tear/heating issues/power surges", whereas the standard 2 year warranty only covers manufacturer's defective parts and labor. $89 is fair, cheapskate or not.
4) Your DVD player setup will work fine, but consider getting a blu ray for next Christmas, you'll thank me later.
5) Don't worry about this.
I don't claim to be an expert, but I am an enthusiast, so any "experts" out there feel free to chime in and correct me if I may be wrong.
If you like posts that I make, be sure to click on the star underneath my name. Thanks! -
Editing help for a newbie :) baby photo editing effect
hello everyone Firtly im sorry if i am posting in totally the wrong area but its the first time i have been on the site so not too sure of my way around lol
Im in desperate need of some help with photo editing in cs3.
basically i have seen some baby photos someone i 'know' has taken where a lovely effect has been applied. I asked her how and this is what she said:
'I create a fill layer of a shade of the middle tone of the sikin colour reduce the opacity, then add a texture mask to bring back a bit more of the features and paint it on the areas .. then just sharpen areas such as eyes nose and mouth .. and highlights to the corners of the eyes and centre of the mouth .. and then select high pass as a mask and that makes the image pop out a little bit'
But being a newbie i have no idea how to do any of this!! lol i know my way around photo shop a bit but just afetr ANYONE who can help me step by step pretty pretty please?
here are 2 examples of the images that use the effect incase that makes it easier for anyone to know what i mean lol (hope the links work)
Thank you all in advance if you can help xxThe description seems somewhat unclear in parts.
'I create a fill layer of a shade of the middle tone of the sikin colour reduce the opacity, then add a texture mask to bring back a bit more of the features and paint it on the areas ..
Nor sure what she means with »texture mask«, but possibly just applying heavy noise (Filter > Noise > Add Noise) on the Layer Mask.
then just sharpen areas such as eyes nose and mouth ..
One option is applying Filter > Sharpening > Unsharp Mask to a copy of the Smart Object and setting it to Blend Mode Luminance and painting on its Layer Mask.
and highlights to the corners of the eyes and centre of the mouth ..
This could be done with a Curves- or Levels Adjustment Layer.
and then select high pass as a mask and that makes the image pop out a little bit'
That seems more than a little unclear to me – making a Selection of a High Pass-result and using it as a Mask for what?
One can use the High Pass Filter for sharpening. -
Need help for a newbie problem
I am VERY new to all this Java programming but have really started to enjoy it.
I have two problems with my program that I can not find answers to.
1. I am looking to find out why my code will not select the right answers when I select the first choice in the array. The answer that is delivered turns out to be the 3rd selection. The second and third selection work great, but the first selection always turns out with the thrid answer.
2. I know I need to do better error checking on the user input. At this point I am only checking for correct integer input, but I dont know how to fix or avoid the error for when the user would mistakedly enter letters instead of numbers.
Any hints?
Code to follow... I hope...
No gui allowed for this program.
First time posting so I hope this works and I do it the right way...
import java.text.DecimalFormat; //To round to 2 decimal places for payment format.
import java.io.*; //Allows User to input.
public class Wk5JimP
//classes for keyboard inputs from user
public static InputStreamReader reader = new InputStreamReader (System.in);
public static BufferedReader keyboard = new BufferedReader (reader);
//main
public static void main (String[] args) throws IOException
//Variables
DecimalFormat decimal = new DecimalFormat("#,##0.00"); //Makes the decimal format for the output
int appAmount = 200000; //approved loan amount
short rPay = 0; //repayment option
int ps; //payment schedule switching variable.
//Year array and variables
int yTerm[] = {30, 15, 7,}; //Term of the loan in years array
short rOller2 = 0; //looping variable for rolling the years
short rOller3 = 0; //looping variable for rolling the years
//Month array and variables
int mTerm[] = {360, 180, 84,}; //Term of the loan in months array
short rOller = 0; //looping variable for rolling the months
short rOller1 = 0; //looping variable for rolling the months
//Interest rate array and variables
double iRate[] = {5.75, 5.50, 5.35,}; //interest rate array
int liRate = 0; //looping variable for interest rate
int liRate1 = 0; //looping variable for interest rate
// Payment array and variables
double mPayment[] = {
((appAmount*(iRate[0]/12/100))/(1-1/Math.pow((1+iRate[0]/12/100), mTerm[0]))),
((appAmount*(iRate[1]/12/100))/(1-1/Math.pow((1+iRate[1]/12/100), mTerm[1]))),
((appAmount*(iRate[2]/12/100))/(1-1/Math.pow((1+iRate[2]/12/100), mTerm[2])))
}; //monthly payment array
int lPay = 0; //looping variable for payment incrementation
int lPay1 = 0; //looping variable for payment incrementation
//Dollar amounts into decimal format of two places
String fappAmount = decimal.format(appAmount);
//Output to screen for header information
System.out.println();
System.out.println("Congratulations!");
System.out.println("You are approved for a $" + fappAmount + " loan");
System.out.println("The three repayment options are listed below.\n");
System.out.println("-------------------------------------------------------------------------");
System.out.println(" Repayment\t Loan\t\t Term\t\t Interest\t Monthly");
System.out.println(" Option\tAmount\t Years Months\t Rate \t Payment");
System.out.println("-------------------------------------------------------------------------");
//Begin repayment option loop for calculation
while (rOller != 3)
// if else loop to second and third repayment options
if (rOller1 <= 2)
// for statement loops last repayment option
for (rPay = 1; rPay <=3; rPay++)
{mPayment[lPay] = mPayment[lPay1++];
yTerm[rOller2] = yTerm[rOller3++];
mTerm[rOller] = mTerm[rOller1++];
iRate[liRate] = iRate[liRate1++];
//Output to screen for numerical repayment option info
System.out.println(" " + rPay + "\t $" + fappAmount + "\t\t " + yTerm[rOller2] + "\t" + mTerm[rOller] + "\t " + decimal.format(iRate[liRate]) + "% \t$" + decimal.format(mPayment[lPay])+ "\n\n");
else
//begin payment option selection
System.out.println();
System.out.println("Which one of the payment schedules would you like to see?\n");
System.out.println("Please enter 1 or 2 or 3 to see the payment schedule\nor enter any other number to exit.");
ps = Integer.parseInt(keyboard.readLine());
switch (ps)
case 1:
System.out.println("\nOption #1\n");
paysched(yTerm[0], appAmount, iRate[0], mPayment[0]);
break;
case 2:
System.out.println("\nOption #2\n\n");
paysched(yTerm[1], appAmount, iRate[1], mPayment[1]);
break;
case 3:
System.out.println("\nOption #3\n\n");
paysched(yTerm[2], appAmount, iRate[2], mPayment[2]);
break;
default:
System.out.println("Thank you!\n\n");
System.exit(0);
}//end switch
}//end while
}//end main
//payment schedule method
public static void paysched(int yTerm, int appAmount, double iRate, double mPayment) throws IOException
//Declare variables for looped calculations
DecimalFormat decimal = new DecimalFormat("#,##0.00"); //Makes the decimal format for the output
double balance = appAmount;
double monIRate = iRate / 12;
double iPay = 0;
double pPay = 0;
short pNum = 1;
short year = 1;
//Header Output to screen for payment schedule
System.out.println("-------------------------------------------------------------------------");
System.out.println(" Payment \t Principle\tInterest\tTotal \t\tBalance");
System.out.println(" Year Month\t Payment\tPayment \tPayment \tRemaining");
System.out.println("-------------------------------------------------------------------------");
//Loop for shceduled payment calculation for all but the final year
do
//Apply the payment
iPay = balance * (monIRate /100);
pPay = mPayment - iPay;
balance = balance - pPay;
//Output to screen for payment information
System.out.println(" " +year+ " \t " +pNum+ " \t $" +(decimal.format(pPay))+ "\t$" +(decimal.format(iPay))+ "\t $" +(decimal.format(mPayment))+ "\t $" +(decimal.format(balance)));
pNum++;
if (pNum % 13 == 0)
System.out.println("Press enter to see the next year payments.");
System.in.read();
System.in.read();
year++;
pNum = 1;
//Output to screen for payment schedule
System.out.println("-------------------------------------------------------------------------");
System.out.println(" Payment \t Principle\tInterest\tTotal \t\tBalance");
System.out.println(" Year Month\t Payment\tPayment \tPayment \tRemaining");
System.out.println("-------------------------------------------------------------------------");
} //end if
} //end do
while(year < yTerm);
//Final Year calculations
do
//Apply the payment
iPay = balance * (monIRate /100);
pPay = mPayment - iPay;
balance = balance - pPay;
//Output to screen for payment information
System.out.println(" " +year+ " \t " +pNum+ " \t $" +(decimal.format(pPay))+ "\t$" +(decimal.format(iPay))+ "\t $" +(decimal.format(mPayment))+ "\t $" +(decimal.format(balance)));
pNum++;
if (pNum % 13 == 0)
System.out.println("Please press enter to select and view another payment schedule.");
System.in.read();
System.in.read();
year++;
} //end if
}//end do
while(year < (yTerm+1));
}//end class
}//end classThis is my first post so please be gentle...
Thanks for any help!When you choose Java to solve the problems, you need to adapt to the power/strategies/methodology that java offers you, and thats the way for solving problems in Java.
Why would you put the entire implementation for calculation inside main method? You could break down the program into smaller methods which could do the calculation bit and then call them in main method.
Anyways the reason that it is calculating for term of 7 years is that
// for statement loops last repayment option
for (rPay = 1; rPay <=3; rPay++)
{mPayment[lPay] = mPayment[lPay1++];
yTerm[rOller2] = yTerm[rOller3++];You are changing the value of the array yTerm[ ]. Hence once the control is out of the for loop the value of y[0]=7,y[1]=7 and y[2]=7.
Solution 1: mark yTerm as final.
Solution 2: set yTerm[0], yTerm[1] back as 30,15 after the for loop.
if (rOller1 <= 2)
// for statement loops last repayment option
for (rPay = 1; rPay <=3; rPay++)
{mPayment[lPay] = mPayment[lPay1++];
yTerm[rOller2] = yTerm[rOller3++];
mTerm[rOller] = mTerm[rOller1++];
iRate[liRate] = iRate[liRate1++];
//Output to screen for numerical repayment option info
System.out.println(" " + rPay + "\t $" + fappAmount + "\t\t " + yTerm[rOller2] + "\t" + mTerm[rOller] + "\t " + decimal.format(iRate[liRate]) + "% \t$" + decimal.format(mPayment[lPay])+ "\n\n");
yTerm [0]=30;
yTerm [1]=15;
}Futher the issue is with monthly calculation of pay back amount in switch - case statement.
As you have not provided what the problem is and what is the criteria for calculation of monthly interest or reducing the amount etc. Its not possible (at least for me) to tell you why it would run to negative. Mathematically that is the only thing possible,
Step 1: make those changes in your code. Make changes required to claculate the balance.
Step 2: Execute the new code and
Step 3: Gimme the dukes.
Cheers
$ -
Aspect ratio help for a newbie?
Hi Everyone,
I've got a Sony DCR SR-32 camera (please don't laugh ) and shooting in its HQ mode, (9Mb/s) and 16:9 aspect ratio.
I can import the footage into iMovie and make a movie with no problems. But I've just bought FCE and am struggling to get the footage imported at the correct 16:9 aspect ratio. After trawling the discussions I've tried the log and transfer method, and all the other relevant discussion on importing AVCHD files directly into FCE but no success (I get file opening error ?). So I'm bringing the footage into iMovie, exporting it from iMovie as an FCE XML file and opening that using PAL anamorphic or NTSC anamorphic Easy setups.
Even so, I've got what looks like 16:9 video squeezed into a 4:3 aspect ratio with black boarders on either side padding it out back to the 16:9 size.
I'd welcome any advice other than "get a new camera "Hi Tom, I seem to have a similar problem, not sure if you've seen this, but I have the new canon vixia hg 21 which is avchd and FCP 6 isn't recognizing it either. Using Imovie to recognize the files works fine, the problem is that when you export from imovie '08 into FCP via xml, it imports fine, but I also get the same display issue with the black bars surrounding the footage, only in the canvas. It appears fine in the viewer and in it's own sequence in the timeline. But when you mix the different camera footage together, the other being the Canon XH A1, it appears as a different aspect ratio??? What the?
ANy help would be greatly appreciated! -
Help for a newbie using the SAP tutorial
Hi All,
This is the first time i have picked up the SAP SDK and I am following the tutorial that is in the the help document that is installed with the SDK installation.
Under the developers guide section > Tutorial: Blanket Agreement Solution
I have worked down to Part 4 and I am stuck on step 1 (create an installer)
Towards the end of the page it talks about creating a new project and to opening line is: "Add the BlanketAgreement.exe file to the project and change its Build Action to Embedded Resource."
Can somebody give me some help here please because upuntil now there has been no mention of the BlanketAgreement.exe.
Equally can anybody suggest some more tutorials that will help be get into the SDK.
Many thanks,
MikeHi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen -
Bit of help for a newbie please
Hi,
I'm bumbling my way through some Applescript for simply clicking some links on a webpage in Safari.
I've used UI Browser to get me the link resource info however when cycling through the same page, every now and again, the group ID seems to change for the text link. I was wondering how I go about querying the group ID so I can possibly out in an if/then or other conditional statement.
The activating code line is here:
click static text "Click Here" of UI element "Click Here" of group 12 of UI element 1 of scroll area 1 of group 4 of window "Some Window Title"
So in the above, I'm trying to get the 12 in the group 12 part of the statement.
Any clues anyone.
Thanks if you can help
MartinOne of the traps those new to Applescript fall into is resorting to UI scripting too early when it should be an absolute last resort. Applescript wasn't designed to drive the UI, its an inter-application communication facilitator. There is an alternative method available.
Use "curl" from the shell to download the page source to a variable
Parse out the urls you need
Use getURL to go to activate the url(s).
Copy this to your browser for the "curl" man page -> x-man-page://curl
Here's a 2 line example script to get you started ->
<pre style="
font-family: Monaco, 'Courier New', Courier, monospace;
font-size: 10px;
margin: 0px;
padding: 5px;
border: 1px solid #000000;
width: 720px;
color: #000000;
background-color: #FFDDFF;
overflow: auto;">
set foo to do shell script "/usr/bin/curl 'http://www.apple.com'"
set bar to find text "<script src=\"(http://.*)\" type=" in foo using "\\1" with all occurrences, regexp and string result
</pre>
This uses the [Satimage Scripting Addition|http://www.satimage.fr/software/en/downloads/downloadscompanionosaxen.html] to return the urls by using regular expressions to find them. -
Light Streak Help for a newbie
What I want: I have video of a guy jumping, I want streaks of light to track with him and explode into particles upon impact
What I did: I used the brush tool, Light Streak style, keyframed the jitter to explode the particles
What I can't figure out:
1) I would like the Light Streaks to be a little more precise in following his body, it's close, but I just can't figure out how to hone in on a few keyframes or what key frames I'm even looking for (ala rotoscoping)
2)I want the streaks to be a bit shorter, so I keyframed the First/Last point offset, but that seemed to make the tail of the streak a bit blunt (and I couldn't adjust width over stroke even further)
Am I going about this the wrong way? Is there a better way to rotoscope streaks of light, flames,or smeared paint?Sorry to butt in. I happen to find myself on this forum for the first time in years, and this may not be relevant, but no one is stepping up either.
IN the olden days, I would have approached this problem differently, maybe this will help. I'd be building the light streaks as carefully as possible but not worrying about some fo the details quite yet. I'd render them as individual movies with alpha and bring them all back into the project.
Then I'd start manipulating them individually. For instance, if the streaks are too long, you can clip off the ends with masks. You can mask them off so they appear to pass behind forefground objects. You can add more sparkly thingies to the streaks by creating the on another layer that uses the same tracking information you have already created. You can add individual impact explosions as separate layers (these could all be the same pre-rendered movie at different scales, speeds and with tints or colors).
I usually approach complex effects projects by trying to figure out what I know how to do and what I can fake. Applying a large number of unique variables to a long inventory of effects on a single layer is often a lot of trouble and, when you change one little thing, the changes usually ripple through the project in unexpectecd ways. So I break them out into things I know how to do, like masking and applying individual effects to separate layers, and then blending them all together as prerendered movies in a far less complicated project.
Hope you get better suggestions soon. -
Hi,
I am new to java and I am developing a login module and when i enter the login name and password and clicks on ok button i want it to be displayed as "welcome" followed by login name.
So i wana ask how to pass the string to other code.plz help me out.
Code 1:
import java.awt.*;
import java.awt.event.*;
class Login implements ActionListener
Frame f;
Label l1,l2;
TextField tf1,tf2;
Button b1,b2;
public Login()
f=new Frame("Login window");
l1=new Label("LOGIN");
l2=new Label("PASSWORD");
tf1=new TextField(20);
tf2=new TextField(20);
b1=new Button("OK");
b2=new Button("RESET");
tf2.setEchoChar('*');
f.setLayout(new FlowLayout());
f.add(l1);
f.add(tf1);
f.add(l2);
f.add(tf2);
f.add(b1);
f.add(b2);
f.setSize(500,100);
f.setVisible(true);
b1.addActionListener(this);
b2.addActionListener(this);
public void actionPerformed(ActionEvent ae)
if(ae.getSource()==b1)
String s=tf1.getText();
System.out.println("Login = "+s);
Registered x=new Registered();
else if(ae.getSource()==b2)
tf1.setText("");
tf2.setText("");
public static void main(String args[])
Login x=new Login();
Code 2:
import java.awt.*;
class Registered
Registered()
Frame f;
f=new Frame("REGISTERED");
// s=tf1.getText();
public static void main(String args[])
Registered x=new Registered();
System.out.println("WELCOME "+s);
}Hi,
ok what you can do is make the Registered() constructor be
Registered(String s) {
this way when you call Registered from the Login() class you can use
Registered x = new Registered(tf1.getText());
so that the string is sent to the Registered class.
in the Registered class you can now use the constructor variable "s" for the name so the output would be
System.out.println("WELCOME "+s);
That would fix your problem. Although your Registered class could be improved. I suggest you get rid of the main() method in Registered() it isn't needed as the Registered object is created in Login.
i would make it:
import java.awt.*;
class Registered
Registered(String s) {
Frame f=new Frame("REGISTERED");
Label l1=new Label("Welcome "+ s);
f.add(l1);
f.setSize(100,100);
f.setVisible(true);
I hope all that helps
Dex -
Editing Help for a newbie.....Please be gentle..
I am new to Photoshop CS3, in fact, new to photoshop entirely. I have been using MS Digital Image Pro and up until now it has worked for me.
Here is my problem. I take a lot of pictures of coins. Sometimes I have to tilt the coin slightly to get a good rendition of the color. So at time the image is slightly oval.
I can not figure out how to use a tool to outline the coin, cut it (or copy) and paste to another project. The part that I can't figure out is adjusting the circle marquee tool to the perimeter of the coin.
Thank you for any help.OK, then...so my suggestion about scanning the coins is so worthless to you that it's not even worth commenting about?
If so, so be it. I don't necessarily live and die by having my suggestions validated. Acknowledgment is kind of nice to see, though.
If you insist on your current workflow, maybe you'd like to know this little trick:
As you click-and-drag out an elliptical marquee, you're going to try to be pretty close to properly surrounding your coin, right? Well, before you let up on your mouse button to commit to the elliptical "marching ants" selection area, press and hold your space bar. This will allow you to drag your current marquee around the document window. Move it so it's closer to accurately surrounding your coin, then let up on the space barKEEPING YOUR MOUSE BUTTON DEPRESSEDand you can continue to resize the marquee. If you get close, but not exact (maybe your hand gets tired; I know mine does occasionally when doing this), go ahead and commit to the selection. Then you can use the Transform Selection function to fine tune it.
Now, having said that, and knowing that you've remarked that you'll be doing a lot of this type of photography, it would seem to me that your efforts would be better served by figuring out a way to properly shoot the coins so that the circular distortion you have to correct for is eliminated. Since you say the reason you have to tilt the coins is to get a better capture of the color, my guess is that you need to focus your efforts on a better lighting scheme. Get the light correct, and you'll be able to shoot the coins straight-on, eliminating the circular distortion, and a whole lot of repetitive, finicky work in Photoshop.
Invest the time, effort and experimentation up front, for dividends that will pay off later with every coin image you do. -
Upgrade help for a newbie..please (PSE 3.0 to 7.0)
I have just bought a new computer & am in the process of transferring everything over. I am now using Vista.
I have been using PSE 3.0 on my old computer, & would like to now upgrade to the newest edition of PSE. I only used PSE for editing & not photo storage/cataloging. I still have discs & serial numbers for both PSE 3 & Premier elements(which I never used). At present I have no photoshop programs (full or trial) loaded on my computer,.
What is the easiest way to get PSE 7.0? Do I have to install PSE3.0 to have an upgrade? Will it work on Vista? Also, if I download the upgrade rather than have the box sent out, what am I missing out on.
I'm tempted to go & just buy the full version from a local retailer because It sounds easier, unless someone can tell me otherwise..
Help/advice would be much appreciated.
Many thanks.Buy the upgrade. Install PSE7. That's it.
Note: the upgrade, and the full version, are not different in any way except price. -
More help for a newbie please!
hi everyone
ive got a list selection listener set up for my view class
this list shows names retrieved, this has been done by the following
for (int i=0;i < data.size(); i++)
Person aPerson = (Person)data.get(i);
// Compose a string for each object.
String personNameString = aPerson.getSurname() + ", " + aPerson.getName();
// Put string into array.
listArray=personNameString;
listModel.addElement(listArray[i]);�
what im stuck on how to do is to select a name from the list and have other data like
getLicenceNo() or getDateOfBirth() to be shown on jtextfields
any help would be appreciated... the closest i can get is to have something like this in the listActionListenerameList.addListSelectionListener(new ListSelectionListener()
public void valueChanged(ListSelectionEvent event)
String d1String = aPerson.getName();
String d2String = aPerson.getSurname();
String d3String = aPerson.getLicenceNo();
Object selectedValue = nameList.getSelectedValue();
licenceField.setText(selectedValue.toString());
validate();
but all i get is the terminal window coming up with lots of error messages under NullPointerExceptionthis is the error that comes up under terminal window upon clicking a name in jlist
java.lang.NullPointerException
at View$3.valueChanged(View.java:102)
at javax.swing.JList.fireSelectionValueChanged(JList.java:1321)
at javax.swing.JList$ListSelectionHandler.valueChanged(JList.java:1335)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:187)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:167)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:214)
at javax.swing.DefaultListSelectionModel.changeSelection(DefaultListSelectionModel.java:402)
at javax.swing.DefaultListSelectionModel.changeSelection(DefaultListSelectionModel.java:411)
at javax.swing.DefaultListSelectionModel.setSelectionInterval(DefaultListSelectionModel.java:435)
at javax.swing.JList.setSelectionInterval(JList.java:1608)
at javax.swing.plaf.basic.BasicListUI$MouseInputHandler.adjustFocusAndSelection(BasicListUI.java:1333)
at javax.swing.plaf.basic.BasicListUI$MouseInputHandler.mousePressed(BasicListUI.java:1295)
at java.awt.AWTEventMulticaster.mousePressed(AWTEventMulticaster.java:222)
at java.awt.Component.processMouseEvent(Component.java:5097)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3195)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100)
java.lang.NullPointerException
at View$3.valueChanged(View.java:102)
at javax.swing.JList.fireSelectionValueChanged(JList.java:1321)
at javax.swing.JList$ListSelectionHandler.valueChanged(JList.java:1335)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:187)
at javax.swing.DefaultListSelectionModel.fireValueChanged(DefaultListSelectionModel.java:157)
at javax.swing.DefaultListSelectionModel.setValueIsAdjusting(DefaultListSelectionModel.java:554)
at javax.swing.JList.setValueIsAdjusting(JList.java:1675)
at javax.swing.plaf.basic.BasicListUI$MouseInputHandler.mouseReleased(BasicListUI.java:1371)
at java.awt.AWTEventMulticaster.mouseReleased(AWTEventMulticaster.java:232)
at java.awt.Component.processMouseEvent(Component.java:5100)
at java.awt.Component.processEvent(Component.java:4897)
at java.awt.Container.processEvent(Container.java:1569)
at java.awt.Component.dispatchEventImpl(Component.java:3615)
at java.awt.Container.dispatchEventImpl(Container.java:1627)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:3483)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3198)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3128)
at java.awt.Container.dispatchEventImpl(Container.java:1613)
at java.awt.Window.dispatchEventImpl(Window.java:1606)
at java.awt.Component.dispatchEvent(Component.java:3477)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:456)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:201)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:151)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:145)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:137)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:100) -
Hi,
I have set up a website on a new Redhat7.3 box with Apache2.0 and integrated Tomcat4.0 to handle the servlets used in the site. Yesterday I finished installing Oracle 9i Enterprise edition on the machine (I need a simple single table database that I will be able to access through the servlets). I am a bit overwhelmed by all the info out there that I really don't know where to start, so my questions are:
1: "What do I do to make the database?"
2: "How do I access the database, should I use the Thin or the OCI driver?"
3: "Are there any examples around to do the above?"
In general I mainly need to know where to go from here and if there may be any resources around to help a newbie like myself.
Thanks again,
Rick.Hi,
I have set up a website on a new Redhat7.3 box with Apache2.0 and integrated Tomcat4.0 to handle the servlets used in the site. Yesterday I finished installing Oracle 9i Enterprise edition on the machine (I need a simple single table database that I will be able to access through the servlets). I am a bit overwhelmed by all the info out there that I really don't know where to start, so my questions are:
1: "What do I do to make the database?"
2: "How do I access the database, should I use the Thin or the OCI driver?"
3: "Are there any examples around to do the above?"
In general I mainly need to know where to go from here and if there may be any resources around to help a newbie like myself.
Thanks again,
Rick. -
Hi, I am currently a newby in developing apps, It got to my ears that a little TV channel has a competition on creating an app to view their webpage without using safari browser...I would like to get some help with that, if that is possible!Thanks!
or, just find the PhoneBook constructor, and newthat
sucker.That depends on what the constructor does (it
shouldn't do any more than initialize the instance)
and what instance methods there are. He wants on
program to cause another one to do what's currently
in that second one's main.
I agree that in general it's probably a better idea
to creat a phone book and ask it to do things, but
just constructing one won't necessarily work for the
OP with his current code.Hmmm. I have to think about this a little. It seems to me that it depends on how much application logic resides in the main class, and how the OP wants to interface. If all he can do is call main, then he has little programmatic control, since the interface is defined by the public methods. Unless all he wants to do is start it up, and then interface by way of the GUI.
Maybe you are looking for
-
Requirement of General Ledger Trial Balance Detail Report Date wise
Thanks for your reply We have to requirement of General Ledger Trial Balance Detail Report Date wise. Please help for that. Thanks.
-
Problem with XSD validation in Java 5
Hi everyone, my application creates in memory schema using JDOM. In Java 6 validation runs fine, but in Java 5 (which is the target platform currently) it fails. I tried a second test with just parsing an existing XSD document (not created using JDOM
-
Error Team Calendar : No Views found : Missing customization
Hi , User encounter the following error when he try to click on the team calender. "No Views found : Missing customization " Any idea why and how to solve this Issue? this is happening for 1 employee only? Table : V_TWPC_V In table V_TWPC_V, the vi
-
Dears, I am a new commer to BPEL. I would very much like to find a reference on how to use a process as a partnerlink(similar to the way services are used). Can anyone shade a light on this issue? Thanks. M.OLI
-
Module pool prorgam in table control designing
Hi , I have created the table control in module pool program.(Screen added in VA01 header level under addition data2) I have given the option for table control for Single line selection and W/Sel colum . My requirement is if i enter the data in table