Implementation of Enterprise Portal on Solution Manager 7.0 /ECC 6.0

Hello EP Experts
Need your help to implement Enterprise Portal on Sulution Manager. As we know Solution Manager/ECC has Java Stack, and since it has JAVA Stack Currently BI is working and its been using. Since, BI is there my undrestanding is part of Netweaver is installed on the Box. So, my Question is;
1. Is it possible to activiate or implement Enterprise Portal on Solution Manager/ECC with the available resources?
2. If yes, how to do this? What are the additional contents to be installed
Please provide me the detailed information regarding this.
Thank You
Aftab

Hi,
the enterprise portal is deployed /installed on the Web AS Java - not on solution manager. BI installation comes together with a portal installation. It's also possible to have a WebAS Java without enterprise portal but not in case of BI.
Regards
Anja

Similar Messages

How to add enterprise Portal in Solution manager

Hello,
I wanted to add the enterprise Portal system in Solution manager ( for Service desk ) in SMSY.
Can anybody guide me how can I add the EP( enterprise portal system) in Solution manager
Regards,

Hello,
What is your SLD look like?
You have to connect the EP to SLD and use the LANDSCAPE FETCH job to import to SMSY - Txn SMSY_SETUP - Source SLD.
Now the non abap system data present in the SLD will be reflected in SMSY.
Refer below threads:
How to define an enterprise portal system(JAVA) in SMSY in solution manager
Re: Creation of solution for J2EE system
How insert Enterprise portal in Solution Manager
Regards
Vivek

How insert Enterprise portal in Solution Manager

Hi guys,
Can anyone explane me how can I insert an enterprise portal in Solution Manager?
I have execute this steps:
- transaction smsy
- landscape components -> Systems -> Create New System With Assistant
- Choose SAP Enterprise portal
After that I can see the Entreprise portal in smsy but I haven't inserted the ip of EP.
How can connect the E.P. with my solution manager?
I would configure the "System Monitoring" scenario for EP..
Thank in advance for help.
best regards
giovanni

does this actually work out?
To have SolMan 7.0 EHp1 installed and than to install SAP EPC on top of this?
SAP EPC is based on NW, so is SolMan 7.0. But according to the SolMan 7.0 Master Guide EPC/EP is not listed as a available Usage Type
Nesimi

Implementing the Enterprise Support in Solution Manager

Hi Experts,
Can anybody tell me what are the pre requisites to implement Enterprise support in solution manager?
Also let me know what are steps involved in implementing the enterprise support.
Thanks in Advance
Hari

Hello Hari,
In order to implement Enterprise Support your organization should registered as a Value Added Reseller(VAR) with SAP. You can get all the required documentation under https://websmp104.sap-ag.de/solutionmanager --> Information for VARs, ASPs and AHPs which is in the left hand side of the page. However, you need to have a S-user ID of the VAR.
The following are the steps need to perform in implementing the Enterprise Support firmly known as Service Desk for VARs.
1. SAP Solution Manager basic settings (IMG)
a) Initial Configuration Part I
b) Maintain Profile Parameters
c) Maintain Logical Systems
d) Maintain SAP Customer Numbers
e) Initial Configuration Part II
     1) Activate BC Set
         a) Activate Service Desk BC Set
         b) Activate Issue Monitoring BC set
         c) Set-up Maintainance optimizer
         d) Change online Documentation Settings
         e) Activate Solution Manager Services
         f) Activate integration with change request Managemnt
         g) Define service desk connection in Solution Manager
   2)Get components for SAP Service Market place
        a) Get SAP Components
   3) Get Service Desk Screen Profile
       a)generate Business Partener Screen
   4)Copy By price list
       a)activate Service Desk BC Set
       b)Activate Issue Monitoring BC set
       c)Set-up Maintainance optimizer
      f) Business Add-In for RFC Connections with several SAP customers
      g) Business Add-In for RFC Connection of Several SAP Cust. no.
      h) Set-Up SAP Support Connection for Customers
      i) Assign S-user for SAP Support Portal functionality
      j) Schedule Background Jobs
      k) Set-Up System Landscape
      l) Create Key Users
      m) Create Message Processor
2. Multiple SAP Customer Numbers
      a) Business Add-In for RFC Connections with several SAP customer numbers
      b) Set-Up SAP Support Connection for Customers
3. Data transfer from SAP
      a) Data Transfer from SAP
4. Create u201COrganizationu201D Business Partner
5. Service Provider function (IMG)
      a) Business Add-In for RFC Connections with several SAP customer numbers
      b) Business Add-In for Text Authorization Check
      c) Activate BC Set for Service Provider
      d) Activate Text Types
      e) Adjust Service Desk Roles for Service Provider Menu
6. Service Provider: Value-Added Reseller (VAR)
      a) Business Add-In to Process Actions (Post-Processing Framework)
     b) Activate BC Sets for Configuration
     c) Create Hierarchy and Product Category
     d) Set-Up Subcategories
     e) Create Business Partner as Person Automatically
     f) Set-Up Automatic Confirmation of Messages
    g) Maintain Business Partner Call Times
    h) Set-Up Incident Management Work Center
7. Work Center (Web UI)
    a) Activate Solution Manager Services
    b) Assign Work Center Roles to Users
Hope it helps.
Regards,
Satish.

Reg:implementation Enterprise portal in solution manager

hi all
i am new to the concept of solution manager .In this how can we implement Enterprise portal .Actually what an EP consultant work need to be done in this solution manager.can any one provide some real time scenarios info related to it .
regards
Deepika

Hi,
Regarding the implementation phase, Solution Manager helps you via several functionalities:
- Solution Documentation: Central documentation of processes, system landscape, custom code,...
- Test Management:Change impact analysis, End-to-end test management
- Change Control Management: Integrated quality management, Synchronized transports of various components, Controlled and documented adjustment of business processes incl. approval process
- Application Incident Management: Integrated service desk, Involvement of partners in problem resolution, Provide root-cause analysis for complex landscapes with diverse technology stacks
The most important part in from my perspective for a implementation consultant is the Project Documentation functionality, where you can get Implementation Content for Enterprise Portal. This includes business scenarios documentation and business process included in the Business Process Repository, how to configure different scenarios and business processes, test cases, etc.
I think you can find some information in the marketplace about this functionality. For example you may find something under service.sap.com/alm -> SAP Solution Manager and Tools.
Best regards,
Fernando

Configure EWA and performance monitoring of portal in solution manager

Hello All,
I want to configure EWA for portal in solution manager.
As well as want to get some data collection for performance of portal using solman.
so can anybody guide me for the same as well as provide some valuable inputs.
Thanks in advance.
Regards,
Ramkrishna

Hello,
u mean perormance of portal right?
I would suggest you to start with configuring this EWA,when it is done you will get the performance data from EWA itself and then we can anaylze and move forward
But still if you want you can refer to notes 485933,1017324 and 934808
They will be higly useful
Rohit

Best Practice Implementation for Enterprise Portal

hi,
I am doing Best Practice Implementation on Enterprise Portal.
In that i cant find one file. Can you please help me in finding these file "BP_RAPID_ALL.epa"
Thanks in Advance
Regards,
Raju

Hi All,
Till now no one has answered for my query.
can i know is there any replacment for this file(BP_RAPID_ALL.epa) in new version of Best Practices.
Regards,
Raju
Edited by: V R K Raju P on Feb 17, 2009 1:04 PM

Best Practices Implementation on Enterprise Portal

Hi All,
Can you please explain me what is Best Practice Implementation and Also please help me in Best Practices Implementation on Enterprise Portal.
Regards,
P V R K Raju
Edited by: V R K Raju P on Feb 11, 2009 12:25 PM
Edited by: V R K Raju P on Feb 11, 2009 12:25 PM

Raju,
The best practices are all scenario based.
You may however check them out.
help.sap.com -> Best Practices.
Best Practice for Portal =>
http://help.sap.com/content/bestpractices/crossindustry/bestp_crossindustry_ep.htm
http://help.sap.com/bp_epv170/EP_US/HTML/Portals_intro.htm
Regards,
Ritu

To extract portal activity data from the portal into Solution manager.

HI all,
I need to extract the portal activity data from the portal into Solution Manager BI and then later on into the SAP BW in order to generate BEx reports on the portal activity data. I need to know about the configuartions that are needed to be done on the portal side and the solution manager side so as to get the data into SolMan from portal. Waiting for a response.
Thanks and regards,
Divya.

Hi
In solution manager you can do the analysis of the ADC data files (Portal activity reporting) as as part of the End-to-End Diagnostics (Portal Activity Reporting tab in the End-to-End Workload Analysis).
Will you see the Portal Activity Reporting tab under End-to-End Workload Analysis?
by default PAR in SAP Solution Manager 7.0 EHP1 is deactivated ,since we requires
some manual configuration of the Activity Data Collector.
please follow the attached config guide in the SAP note for configuration.
Jansi

Solution Manager and SAP ECC on same server

Hi Experts,
I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
But can I use same mount folders?
Kindly highlight your experience and knowledge on this point?
Thank you so much
Regards,
LuongDK

>
LuongDK wrote:
> Hi Experts,
>
> I want to install Solution Manager and SAP ECC on single server. Oracle database with different schema (e.x SAPSR3, SAPSR4)
> But can I use same mount folders?
>
> Kindly highlight your experience and knowledge on this point?
>
> Thank you so much
> Regards,
> LuongDK
Hello LuongDK,
Please refer to the FAQ section on http://service.sap.com/solutionmanager, Check the installations section:
Which system should I use to install SAP Solution Manager?
The system has to be dedicated to the SAP Solution Manager. No other components can be installed on top of SAP Solution Manager.
SAP Solution Manager does not necessarily require separate hardware. It can be installed as a separate instance on an existing hardware.
This means that the hardware can be shared if it is sufficient to support 2 systems. However a MCOD option is not recommended at all.
Regards
Amit

Implementing ASAP Methodology using SAP Solution Manager

Hi All,
Can any one help me with any documentation regarding ASAP methodology implementation using Solution Manager.
The step by step process and transaction codes used for implementing it are there any guides provided by SAP for implementing the ASAP methodology in Solman.
It's an implementation project that we would like to track each phase in Solman.
Kindly help me to get more details.
Thanks in advance.

Hi,
There are the 'ASAP Implementaion Roadmaps' wheras the latest available
is the 'ASAP Methodology for Implementation 7.0' Roadmap, and there are
the 'Upgrade Roadmaps' wheras teh lastest one of them is:
'Upgrade Roadmap (V3.2)'.
If you are on ST-ICO 150 SP24 both of these Roadmaps
should be available in your system.
There are two ways to display the roadmaps in RMMAIN.
One is to choose a project in RMMAIN, then the roadmap assigned to
the project in SOLAR_PROJECT_ADMIN is displayed.
The other one is to display any available roadmap in the system
To display one of the available roadmaps (without a project) choose
the button 'Other Roadmap' in RMMAIN and in the upcomming popup
hit the button 'No Project'.
After that you should get an addtional button besides the Project
button called Roadmaps (Other Roadmap).
When you hit now this button you will get a list of all available
roadmaps.
Some further notes for referencing (although they can be old but still helpful)
644651 How to find the Reference Model in Solution Manage
826586 ASAP Implementation Roadmap
Hope this helps.
Cheers
SH

Add sap R/3 enterprise system in solution manager SLD

Dear All
Required solution manager configuration documents.
We have DEV QAS and PRD server on SAP mySAP ERP 4.7 ( SAP R/3 Enterprise )
And during the installation of solution manager I select u201CConfigure a Local SLD u201C
Which steps I follows to connect or configure my sap system with solution manager ( SLD ) then I will configure central monitoring, TMS management, Helpdesk etc
Who to Configure SLD Bridge ( in SLD Server ) ?
in which system Run Transaction RZ70 ( In SAP R/3 Enterprise ) ?
and how to Verify that my system is connected and working fine With SLD
Please help me regarding u201C configuration solution manager u201C
Regards
Shahid

Hi
Visit for step by step details of Standard Configuration of Basic Settings
http://service.sap.com/rkt-solman-->SAP Solution Manager 7.0->Technology Consultants & System Administrators->Technical Configuration->just drill out there you can find lot of simulator how to install and configure solution manager
http://www.wilsonmar.com/sap_solution_manager.htm
/people/federico.babelis2/blog/2006/04/14/service-desk-configuration-guide-for-dummies
Regards
Uday

Business Function Set: Enterprise AddOns in Solution Manager

Hello
For testing purposes I want to activate the Enterprise AddOn EA_PLM in transaction SFW5 inside a Solution Manager 4 installation but no Enterprise AddOn is available. Additionally there is only one Business Function Set called "telco reference pack" with two Business Functions. Do I have to set up something before I can active the Enterprise AddOns? I thought PLM is part of the Solution Manager 4 installation.

Hello Marc,
the Solution Manager consists "only" of an CRM-component, the SolMan component itself and the Netweaver 2004s platform. So no PLM (and no Enterprise AddOn) is available. SolMan coves some functionalities of Software Lifecycle Management, but does not include the PLM coding itself. For EA_PLM you need an ERP system.
Best regards, Alexander

EPSolman: Portal to Solution Manager

I am trying to integrate the Request Support" iView for Solution manager.
I have given the iview parameters as iven by note 658665
R/3 Installation Number of the Solution Manager
Portal DBMS short
Portal DBMS release Target R/3 Solution Manager version
the connection for MMC_SOLOMAN connector also works fine.
When i try to submit a query, it gives me the below error
Errors sending data from the portal to the SAP Solution Manager
Exception caught at onSendButtonClicked: null
can anyone help
Regards
Jayesh

Dear All
Please let me know if any one has treid integrating EP with Solution manager. (Request/ Iview )
Regards
Jayesh

SAP XI scenarios (SAP Solution Manager and SAP ECC 6.0)

Hi!
I have a SAP Solution Manager System 7.0 (ABAP+Java) and SAP IDES ECC 6.0 (ABAP).
Futhermore I have SAP NetWeaver 7.0 with SAP XI 7.0.
Which scenarios can I implement with these systems and where can I find the appropriate documentation?
- Proxy to Proxy
- IDOC/ALE
- Webserice
- other scnenarios (???)
Thank you very much!
regards
Holger

Hi Holger,
Please do search in SDN you might get more.......
Proxy to Proxy
ABAP Proxies in XI(Client Proxy) - ABAP Proxy to File
File to R/3 via ABAP Proxy - File to ABAP Proxy
IDOC/ALE
Introduction to IDoc-XI-File scenario and complete walk through for starters. - IDoc to File
Few other scenarios :
File to R/3 via ABAP Proxy - File to ABAP Proxy
Introduction to simple(File-XI-File)scenario and complete walk through for starters(Part1) - File to File Part 1
Introduction to simple (File-XI-File)scenario and complete walk through for starters(Part2) - File to File Part 2
Convert any flat file to any Idoc-Java Mapping - Any flat file to any Idoc
RFC Scenario using BPM --Starter Kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] - File to Mail
Dynamic File Name using XI 3.0 SP12 Part - I - Dynamic File Name Part 1
Dynamic file name(XSLT Mapping with Java Enhancement) using XI 3.0 SP12 Part -II - Dynamic File Name Part 2
The specified item was not found. - Dynamic Mail Address
Understanding message flow in XI - Message Flow in XI
Walkthrough with BPM - Walk through BPM
Schedule Your BPM - Schedule BPM
Demonstrating Use of Synchronous-Asynchronous Bridge to Integrate Synchronous and Asynchronous systems using ccBPM in SAP Xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
The specified item was not found. - Maintain RFC destination centrally
Triggering e-Mails to Shared folders of SAP IS-U - Triggering Email from folder
Outbound Idoc's - Work around using "Party"? - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
The specified item was not found. - Testing of integration process
The specified item was not found. - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
The specified item was not found. - Alert Configuration
The specified item was not found. - Trouble shoot alert config
Executing Unix shell script using Operating System Command in XI - Call UNIX Shell Script
Overview of Transition from Dev to QA in XI - Transport in XI
Using ABAP XSLT Extensions for XI Mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
IDOCs (Multiple Types) Collection in BPM - Collection of IDoc to Single File
XI : Controlling access to Sensitive Interfaces - Controlling access to Sensitive Interfaces
The specified item was not found. - The same filename from a sender to a receiver file adapter - SP14
Payload Based Message Search in XI30 using Trex Engine - Payload Based Message Search in XI30 using Trex Engine XI : Configuring CCMS Monitoring for XI- Part I - XI : Configuring CCMS Monitoring for XI- Part I
The specified item was not found. - XI: HTML e-mails from the receiver mail adapter
Thanks
Prabhakar

Implementation of Enterprise Portal on Solution Manager 7.0 /ECC 6.0

Similar Messages

Maybe you are looking for