Implementing UCES in SAP ISU- IDES system
Hi,
We are interested to implement UCES in SAP ISU - IDES system which we have for our internal competency and Customer POCs/Demos. ( ECC 6 with ISU)
Could any body please share their experience or knowledge on this, that would be of very helpfull.
Many Thanks
Raja
Hi,
There is something called UCES - Biller Direct where is there is an Interaction Between SAP Biller Direct and Contract Accounts Receivable and Payable.
Purpose:You should use SAP Biller Direct if you want to present information about customer accounts in your Internet portal and offer your customers the option of paying bills or of creating inquiries and complaints via the Internet.
Implementation Considerations : Your customer does not need to install any SAP software to be able to use SAP Biller Direct. All functions can be carried out using a standard Web browser.
Information on the necessary system requirements and the browsers supported by SAP Biller Direct can be found in the introductory sections of the installation guide.
SAP Biller Direct consists of an application based on JavaServer Pages. The accounting system runs on a standard application server and is used as the back end for SAP Biller Direct. The transfer of data between the front end and back end is done by RFC and is ensured using the SAP Java Connector (JCO), which you install as part of the SAP middleware.
Award points if this is found useful.
Similar Messages
-
How to archive data for SAP ISU&Billing Systems
Hi All,
Can any one tell me the procedure that how do the archiving data for SAP ISU-Billing Systems
RegardsPlease check this thread you will get some idea about this.
[Billing for Archiving|http://help.sap.com/saphelp_utilities472/helpdata/en/97/276c359513cf41e10000009b38f839/frameset.htm]
Regards,
Siva -
Hi there,
I am looking for the configuration notes on setting up IDE from a ISU point of view. Also the notes on what is new on IDE.
If there is anything on this I will appreciate emensly from anyone.
thanksHi,
IDE supports the cross-company exchange of settlement data based on international standards , manages data transfer between retailers, distributors, and independent service operators with special regard to the requirements of deregulated markets.
At the communication level events triggers the data exchange process which has the logic for inbound and outbound processes. Data exchange tasks are the result of data exchange process. Communication Event Function Module determines data exchange task data such as Data exchange Basic Process based on the file type, Sender/Receiver service providers, Point of Delivery. Communication Processing Function module is triggered dynamically and is responsible for creation of IDoc format (control and data).
IDE Configuration :
Basic process (client independent) - Define the underlying business process
Data exchange process (client dependent) - Implemented based on basic process per customer
Attach the data exchange process to the service provider.
Hope it helps.
Rgds,
Krishna -
Multiple SAP R3 Source System in BI
Dear Gurus,
Here's my scenario,
I've SAP ECC Development Source System connected to my SAP BI Development Server system.
Now my Question is ,
1.We also have SAP ECC IDES system client 800 and therefore would like to connect this SAP ECC IDES system to our SAP BI Development System , because we need to do a pilot project for our prospective client and therefore we need the Dashboards and the reports created on the SAP ECC IDES system DATA.
So can I've two Source System in my SAP BI system ?? If yes , will it affect my present objects like InfoCube , Masterdata which I've already created with previous Source System ?
Regards,
-NehaHi,
So can I've two Source System in my SAP BI system ??
Yes its absolutely possible. In fact it is done in production systems as well, wherein some big organisations have multiple R/3 systems and only 1 BI system.
If yes , will it affect my present objects like InfoCube , Masterdata which I've already created with previous Source System ?
No it would not affect any of these. Your datatargets can handle the data from multiple systems. There is one rider on this.
The key fields in your datatargets should not have same value from different source systems, otherwise they would get overwritten by the new data records. e.g.
Suppose you have 2LIS_18_I0NOTIF datasource from both the systems getting loaded into same datatarget. If notification number from first system is 123 and from other system also 123, and this is the only keyfield in your DSO, one of them would get overwritten.
Similar would be the case for Master data loading as well. For master data, atleast you have a way around this. You can go for compounding with source system. This way system would differentiate the master data from different source system, even if their values are same.
Hope this was helpful -
We have installed a SAP ERP IDES system but we'd like to try out Simple Finance. We could do a fresh install of ERP but we like the demo data included in IDES system. Is there a simple SAP supported way of migrating our system (or data to be precise)?
No. In down sampling with iTunes a new file is created and added to the library. Most of the old data are preserved but some such as date added are created when the track is added.
Using a third party tool may achieve what you want because the new file could overwrite the old one. I recall using a third party tool to edit a mp3 and overwrite the old file. iTunes was tricked into thinking the replacement was still the original file, but of course the edits were in place. I can't make a specific application recommendation for bulk conversion where it will overwrite the old file.
I will regard this as a general iTunes question but in general if you are using beta software versions you should not be posting in the main iTunes forum. -
Can UCES be implemented SAP ISU 4.72
Hi Guys,
We have a requirement to implement SAP ISU 4.72. Please let me know if this is feasible.Hi Vikrant,
You need industry release 6.00 (ERP 2005), please see the requirement from Service Marketplace:
http://service.sap.com/utilities
-> SAP for Utilities - Product Information
-> SAP Utility Customer E-Services
-> UCES Documentation ("SAP Utility Customer E-Services 6.0 - Installation Guide")
"To install SAP Utility Customer E-Services you must first have installed the IS-U/CCS component of the SAP for Utilities industry solution. The software components IS-U/CCS, from the industry solution SAP for Utilities Release ERP 2005, SAP Web Application Server 7.00 and SAP Utility Customer E-Services 6.0 are required."
regards,
David -
FICA -IDOC for posting the billing data from NON-SAP ISU system
Hi,
Kindly note we are implementing NON-SAP ISU with SAP FICA for the finance implementation. In this context, we ahve identified BAPI for BP and CA. We have decided to go for transaction posting through the transaction FPE1. For this, we are looking for the transaction data IDOC which is CTRACDOCUMENT_ACCOUNT (FICA Posting) in the WEDI. But it seems that it is not yet released. Can anybody help me out for this to either identify the equivalent IDOC or other method to post the data from Banner system (NON-SAP ISU ) system. We are presently not implmenting billing system in SAP ISU, but only FI systemHi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh -
IDES and other Clients in one SAP ERP 2005 System
Hello everybody,
within a project for my master thesis i have to set up an SAP ERP 2005 System. This system should contain at least three clients. One of them should be the IDES client. Another client should be set up with an existing template. The third client should represent a smal company or at least i should set up some example process from the company (there is no need to map the whole company in the system). These processes should be realized with the SAP standard processes and they should just show how to map easy processes to SAP ERP. Neither the second nor the third client need to run in a productive environment, everything is just for training and testing.
My main Questions are:
I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
Can I implement the second and third client in the same ERP System (where the IDES client is) or do i need different Systems for it? Even if there is no productive use for the clients we would like to have a Development and a Quality Landscape. Is this possible with the IDES client? Actually I have two fast machines for this purpose - one for quality and one for development.
I would be very grateful for any hints.
Thanks a lot.
Regards,
MartinHi,
You can use SAP IDES as Dev and Quailty.There is no diffrence in full sap or IDES .In IDES we have some pree configure Clients and full Ecc we have three client 000,001 and 066.
So you can use SAP IDES as DEV.
Your Question :I've already set up the SAP ERP 2005 System but without IDES. Can I still integrate the IDES Content or do i have to reinstall the whole System with a complete IDES Installation?
Ans : you install diffrent mechine.We do't use any content.Do reinstall
Thanks
Pankaj Kalsayan -
SAP ISU UCES - Utility Customer E-services
Hi Folks,
We are using CRM IC Webclient and UCES for a SAP ISU and CRM implementation for a utility company. I have following queries to start with.
1. I understand that UCES works on Java/JSP and can work standalone as well as via EP. Please share documentation as to how to get UCES up and running in both scenarios.
2. There are certain things which can be done via CRM IC Webclient as well e.g Move-in and Move-out. How would this be different from UCES apart from the fact that it is being created by the customer service agent in the former and by the customer in the later.
3. Is there a cookbook for development/configuration for UCES ? If so please share.
Thanks ahead,
Regards,
YuvarajHi,
Good day experts,
iam working on variant programming which is EA88 T.CODE. I've created YAVGCONS variant for avg.consumption which is ISU_YAVGCONS But it goes to short dump. thats why i've created another ISU_YAVGCONS1 For ea00 t.code. when iam execute the ea00 t.code which is under Debug mode. New function module is not triggering? Why? and can i delete old one or else anything i hve to do?
Plz give me solution
regards,
kk -
Finding the modules implemented in a SAP system
Hi All,
Is there any way of finding the modules implemented in a SAP system?
Please reply.
Thanks in advance
Dhanapal SHi Dhanpal,
This is more of a functional question than a technical question. But if you can give a list of all the modules that you would like to know about, then it may be possible to get fair idea of which of them have been implemented.
For example, if you'd like to know whether SD is imploemented or not, you would look for data in tables like TVKO, VBAK, VBAP etc.,
In case of HR, you will see if there are any infotypes being used. for example tables PA0001 etc.,
In case of MM, you will look at tables like MARA etc.,
These points are by no means comprehensive. There are so many other factors that neeed to be considered. For example, if SD is implemented, then in general MM will also be implemented (may not necessairly be the case, but this is common).
The point is that we examine the Customizing Data and Master Data for each of the modules and figure out if it is being implemented.
But the easiest way is to ask the customer which ones he is implementing.
Regards,
anand Mandalika. -
Hardware Spec for SAP ISU 6 + CRM IDES 7
Hi,
What would be a recommended hardware spec required to run SAP ISU 6 + CRM IDES 7 with atmost 4-5 concurrent users?
I plan to implement it using CentOS & SAP MAXDB.
Thanks & Regards,
SumithHi,
As the concurrent users seem to be less, you only need to ensure disk space (for an ERP and CRM IDES you would need atleast 600-700GB) along with appropriate page file size of approx 120-140GB.
As for CPU/RAM: a 2 CPU/8Cores (Intel/AMD 2.08GHz) with 32GB RAM should do well enough.
However, if you plan to do the setup for productive environment please use the SAP Quick Sizer tool.
Regards,
Srikishan -
Logical database in SAP-ISU system
Hello,
Does any1 knows the LDB available in SAP ISU system. I am searching for LDB (or table join) which containes tables like FKKVKP, EVER, EANL , EVBS & ADRC.
Regards,
AbhijeetHello,
Does any1 knows the LDB available in SAP ISU system. I am searching for LDB (or table join) which containes tables like FKKVKP, EVER, EANL , EVBS & ADRC.
Regards,
Abhijeet -
How can SMART METER Technology be integrated with SAP ISU system?
At present the SMART METER technology is integrated with SAP ISU through a third party vendor. The idocs are sent to a third party and the readings are downloaded and sent back in idoc segments.
How can the integration be done without the third party intervention.HI
SAP XI needs to be used for 3rd party intervention to send and recive idocs..
or there are some thrid party softwareslike MDUS ,meter data utilisation system.which wil be again a interface between sap and ami system
so basically its like sap syst--sap xi3rd patry 4 ami comapnyami system
kr
raj -
BW extraction settings for Billing Data from SAP ISU SYSTEM
Hi dudes,
iam currently extracting data from sap isu to bw systesm,but even after generation of many billingmaster dats i dnt find nay record to be extracted in bw system since some settings are missing in isu suystem for extarction process of Biliiing data,
Kindy help me in this regarding the settings to be made for succesful extraction from isu to bw
kr
rajDear Mr Memminger,
unfortunatly I was not able to find any hint about the same issue. As we have closed the FI-key we are waiting for any entry in RSA7. With RSA3 we get results but there are no entries in Delta Queue.
What I was surprised about is the fact that in SM58 there are some tRFC-entries for function module MEREP_DELTABO and target MAM_MI. That looks like error in delta handling. Although my colleague told me that is the integration to Mobile Asset Management and hence has nothing to do with the Delta handling problem.
But could give me a hint where to find the configuration setting for Delta queueing ?
Best regards,
Peter von Schubert
Edited by: Peter von Schubert on Jun 29, 2009 10:17 PM -
Configure Web Services in a SAP-IDES-System?
Hello,
I have access to a SAP-frontend on a SAP-IDES-System and now Iu2019d like to configure two Web Services in SAP. I think I can do this configuration with SPRO, but I donu2019t really know how and where.
Is there a good documentation about Web Services in SAP IDES?
Thanks a lot!Hi,
Have a look at below link.
http://help.sap.com/SAPHELP_NWPI71/helpdata/EN/57/07813ee3d32b44e10000000a114084/content.htm
I sure it will help you out
Rgds
Radhakrishna D S
Maybe you are looking for
-
Error while opening PDF format of a briefing book in OBIEE11g
Hi All, We are facing an issue in Briefing Book in OBIEE11g. When we click on PDF link of a briefing book, we get an error saying: A fatal error occurred while processing the request. The server responded with: The system cannot find the path specifi
-
Help needed regarding SUM keyword in an ITAB loop
Hello, I am maintaining a code as given below. LOOP AT itab INTO totwa. SUM. ENDLOOP. totwa is defined as a workarea which is needed to hold the sum totals of the fields in the itab. According to the documentation of SUM, it should calculate the sum
-
Trying to add a Word Press blog to my Dreamweaver site through a linked tab... is it possible? My client wants a blog on his website that I am curently creating in Dreamweaver and I am clueless on how to manually create one using a DB... so is it po
-
CO_TXT_ROUTING_BACK_ERROR
Hi Gurus, IDOC to Webservice I used BPM (used Asynch-synch bridge ) Orders.Orders05 is my IDOC I am getting following error. <SAP:Category>XIServer</SAP:Category> <SAP:Code area="OUTBINDING">CO_TXT_ROUTING_BACK_ERROR</SAP:Code> <SAP:P1>,BS_ECC</S
-
Hi, I have a real problem with form submissions and readonly text fields. The problem occurs when I have a readonly text field and a field which is requirted to have a value. An example: <f:view> <h:form> <h:inputText id="test"