Implementing Workorder without workflows in Release 12

Can the Workorder workflow in eAM be implemented without the approvals? We just want the workflow to control the statuses. We do not need any approvals in our business process.
Any suggestions?
RV

Your question is not clear RV

Similar Messages

  • Can we implement workflow for release strategy in 4.7

    can we implement workflow for release strategy in 4.7 for PO's please provide some documents.

    HI,
    Check the links
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30c81e21-cd00-2c10-bbba-edb8ce4961be?quicklink=index&overridelayout=true
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/70fef212-b6cb-2c10-e085-c84b80d7068e?quicklink=index&overridelayout=true
    Regards
    KK
    Edited by: Kishore Kumar Galla on Mar 19, 2010 3:40 PM

  • Workflow in release streategy

    Purpose of workflow in release strategy & how to configure is it applicable for both with and without classification

    Hi Prabu,
    If you want to use workflow to release POs, you must make the standard and basic settings for workflow (Basis -> Business Management -> SAP Business Workflow).
    ·     In the case of a release procedure linked to workflow, you must have previously created the user names, positions, jobs, etc. that you here assign to the release code in the organizational plan and must have linked them to the relevant standard tasks in task-specific Customizing (Basis -> Business Management -> Business Workflow -> Perform Task-Specific Customizing).
    ·     You must assign the authorization M_EINK_FRG to the persons who are to be involved in the release procedure ( Authorization Management -> Create Authorization Profiles and Assign to Users).
    If a release code is to be used in workflow, indicate this accordingly in the Workflow field
    The Workflow indicator is also used to control role resolution:
    ·     "1 - Role Resolution with Group, Code and Plant (T16FW)"
    Here you use a role resolution that is supplied in the standard system. To do so, you must assign the release point in the section Workflow (see below).
    ·     "9 - Role Resolution via User Exit"
    Here you use the customer exit M06E0005 to define a role resolution of your own.
    Regards
    Sanjay L

  • PO Mail trigerring without workflow

    Hi ,
    I have one requirement,
    while creating Purchaseorder i want the following requirements
    1)After creating the PO while saving the information mail should go to the folowingpersons without workflow.
          1) who created the PO
          2)who is the Purchaser based on the Purchase group.
          3)who is the approver based on the release strategy.We configure release code 4 levels
              3.1)Finance mangaer - FM, General Manager - GM, Purchasing Head - PH.
                    the  information mail want to go this three  persons while saving the PO.
         4) after creating the PO if we do any changes  in the po that  information mail also want to be go on this following person
         5)after release approving also mail want to go the following persons
         6)if they cancel the release also the mail want to go the following persons.
    which table i can take the particular persons mail id
    how to fetch the data
    I want the table name and field name for this .how to link with Ekko, ekpo
    If any BADI Available for this .....
    Pls let me know  this ...
    Regards,
    K.Shanmugasundaram,

    Hi,
    1)After creating the PO while saving the information mail should go to the folowingpersons without workflow
    Not possible and no Badi for same
    Kailas

  • Create workflow to release Down Payment Request (F-47) before automatic Pyment

    Hi Experts,
    I use basic workflow for parked document to release all invoice document from AP. But i get problem with down payment request.
    In my company, we run down payment by F110 according to down payment request. We use workflow to release parked document before post. But down payment request is created as noted item, so that, it isn't go to workflow when create. Please give me advice how i can manage Down Payment Request. Ex: we want block down payment request when being create and have release function to permit down payment by F110.

    Hi,
    Using T-code F-47 - Down payment request against raise to possible as follows.
    a) Purchase Order Document
    b) Production Order
    c)PM Order
    d)Service Order
    e)Process Order
    f)Internal Order
    Down payment request is not possible against to raise StockTtransfer Order(STO) and display error message.
    So, you have to choose the above list only.
    Hope, it is useful for you.
    Regards,
    K.Rajendran

  • Purchase requisition workflow - reset release via BSP and BAPI

    Hello,
    We have a small workflow to release purchase requisition.
    A mail is send to the approver. The approver opens an BSP application to release or refuse the PR.
    The approval works well.
    The rejection doesn't work well.
    I use the BAPI_REQUISITION_RESET_REL_GEN to reset the first release of the PR (00 release key)
    We have 00, 01, 02 as release key, and all the release have to pass to release completely the PR.
    00 is the requester level.
    My problem is :
    for example I am the 01 level. I received the mail from 00 level, I refuse the PR via the BSP. In ME53N, the current release key is now 00 but when I look at the workflow, the following agent (corresponding to 02 release key) is determined. Normally nothing has to happen.
    Someone has an idea to stop the workflow ?
    thanks
    Véronique

    Hi Martin,
    When I checked the contain of container in the workflow (in the log), I saw that the release key is 02.
    I don't know why but the WF received the event RELEASESTEPCREATED instead of normaly it is finished.
    When I reset the release via ME54N, the WF ends correctly and no new event is received.
    How can't I see why the event is started in the BAPI.
    In fact it is very strange, if I used the BAPI alone, all works, no new event is started.
    But if I used the BAPI in my BSP, a new event is started.
    Thanks
    Véronique

  • Workflow Task Release Status

    Hi All.
    A quick questions. What's the purpose of workflow task release status?
    What's the impact if keep in "Not Release"
    Cheers

    Okay,
    I admit, a bit short on the explanations.
    But (I'm not on an active SAP environment right now, so everything I say, could be wrong, sorry if that seems the case, if not, then I should worry about trying to have a life outside of SAP   )
    When you press F1 on the the release status it is said, that these things have only administrative purposes and do not change the normal behaviour of the system.
    Kind regards, Rob Dielemans

  • The PO was printed straight away without going through Release Strategy.

    Hello,
    Purchase order was raised in March for over Rs 1,000,000/- and went through the Release Strategy for printing.
    The value of this order was changed today - about Rs 7,000/- was added in the purchase order.
    The Purchase Order was printed straight away without going through Release Strategy,
    In a customization we have maintained the Release strategy for the Purchase order
    Please provide the solution on this issue.
    Regards
    Sarin
    Edited by: sarin toms on Nov 26, 2008 1:57 PM

    Dear,
    Check at....OLME-->PO->Release Procedure->Configure Release procedure for PO> Release Indicator--> Pl. Check In Changebility of Release Procedure after release...here you have to give the option " 4".....and percentage of changebility also you have to take care...
    Apart from that...in OLME--> Messages--> Message output---> Message determination...you have to fine tune your message type for Change mode...
    Changeability 4 and percentage 0 will reset the release ONLY when the value of the PO increases. Any other change including decrease in value will not reset the release.
    You can use the release user exit. If the PO is in change mode and Save option is selected, then increase the value in the user exit (This does not increase the PO value actually, just fools the release strategy into thinking that the value has increased).
    Try with changeability 6 instead of 4. 4 will not reset the strategy if the PO is outputted (printed, emailed, etc)
    Please refer the note 662993 and  365604
    Regards,
    R.Brahmankar

  • Workflow In Release Strategy

    Dear All,
    Do you know how to use workflow in Release Strategy? I have used the standard workflow (1) in order when every document is released an e-mail to be sent to the next releaser. I maintained also the users at the "workflow". Can you please specify some settings??
    thanx

    hi,
    You shd check, it could be very usefull for you....check in the tree structure as per the document:
    [WORKFLOW SETUP|http://help.sap.com/erp2005_ehp_04/helpdata/EN/6f/9eeb85cd6b11d1ad77080009d2232d/frameset.htm]
    Regards
    Priyanka.P

  • Urgent Help :: BPEL Workflow Auto Release Error

    HI All,
    im working on a workflow project, i have 3 levels of approval process, first it will assign to one group one of the user pick the task assigned to this group, will act on this by claiming the task and then approve/reject the task. The approved task will move to a next group and the users in the second group will act on that similarly.
    There is a auto release function available in the BPEL workflow. when the user does not act on a task for a particular time that will release the task automatically after a certian amount of time. but strangley the Tasks which are in suspened/completed are being released by workflow auto release function even though the users has completed the task it is bringing back the task to user.
    i think auto release should work on only for claimed tasks when the user is not working with claimed tasks for a particular amount of time. but strangely this is occuring for the completed/suspended tasks.
    can anybody got similar type of error.
    please advise if this needs to be set manually/is it a bug ?
    please find the server versions and details below
    Theser are versions im using in the server..
    SOA Suite
    Core Oracle Version: 10.1.3.3.0
    Patches
    CC 6492514 10.1.3.3.1
    BAM
    Core Oracle Version: 10.1.3.3.0
    Patches
    None Applied
    Database
    Core Oracle Version: 10.2.0.2.0
    Patches
    CC 6492514 10.1.3.3.1 - Update schema for 10.1.3.3.1
    Thanks
    Nadh

    but strangley the Tasks which are in suspened/completed are being released by workflow auto release function even though the users has completed the task it is bringing back the task to user.
    Do you mean even after the approver approve this task, the task still release back to the user?
    Thanks,
    Melody

  • Quary : Implement Payroll without Time Management

    Hi,
             is it posiable implement Payroll without Time manage ment ?  if yes   while performing action ( PA40 )  what we hve have to mention in worke schdule..
    Edited by: prabu ganesh on Apr 30, 2011 1:50 PM

    Yes, it is possible to run PY without TM. But workschedule must be filled and choose time management status 7 - without Payroll Integration.
    Regards,
    Handoko

  • Workflow for releasing PR

    Hello Friends,
    I need a workflow for releasing the PR. For this I had used the default workflow WF_REQ_REL. Its working fine.
    My problem is, if I am rejecting and saving the release of an item in the PR, the workflow is currently choosing the outcome 'Purchase requisition item significantly changed'. Is this correct?
    When I reject the release of a particular item in the PR, I think the outcome to be executed should be 'Release of purchase requisition item refused'.
    Can someone give an appropriate explanation & a solution for this ? Is there anything wrong from my side ?
    Regards,
    Abijith

    Hi Abijith,
    Yes it will follow the significantly changed branch only if you cancel or reject a purchase requisition. The reason is if you check the status of purchase requisition then whenever the PR is rejected, the status becomes changed.
    If you want to take any action in the workflow when the PR gets rejected, then you need to read the field BANPR of table EBAN. If BANPR = 08(REJECTED) , this implies that the PR is rejected and you can take the further actions thereafter based on it.
    There is nothing wrong from your side. But try to look into more technical things like values of fields in table EBAN etc. to know why exactlly  it is following the SIGNIFICANTLY CHANGED branch.
    Feel free to ask more if you don't get this.
    Regards,
    Guddan

  • Workflow for release strategy of Po's

    Dear Experts,
    We want to have Workflow for release strategy of Po's please let me know what settings are to be done from MM side. & form Abap what developments are required.

    Hi
    Pl check the below link
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/bpx-community/enterprise-resource-planning/sap%20mm%3a%20purchase%20requisition%20with%20classification%20and%20workflow%20approval.pdf
    SAS

  • Workflow for release strategy in PO

    Dear All,
    Will anybody tell me how to configure the workflow for release strategy for PO.
    Regards
    R Panda

    Dear Manish,
    I have done all the configuration as per your guidance.
    But I am not getting the mail in mail box. I have done the following config
    Gr                 Cd                WF                            Descrip
    02     I6     1     HOD Logistics-JSR
    02     I7     1     GM Logistics-JSR
    Gr                 Cd                         Descrip                      OT                  Agent it
    02     I6     HOD Logistics-JSR     US     RP
    02     I7     GM Logistics-JSR     US     DD
    OOCU---
    MM-PUR
    1) Activate event linking- WS 20000075---BUS2012-RELEASESTEPCREATED-ACTIVATED (I ticked both the check boxes)
                                                   Linkage status-no errors      error feedback---system defaults
    2) Assign agents----WS 20000075Create agent assignments-I assigned above two user ids against user......
                                            In attributes it was no general task & not classified.
    In trxn code SWETYPV both the check boxes are ticked with no error.
    Please reply.
    Regards
    R Panda

  • Customizing steps of workflow for Release strategy

    Hi Experts,
    Iam looking for step by step customizing details of workflow for Release Strategy for Purchase Requisition.
    I need necessary classification and Customizing settings for a release procedure in the purchase requisition to the workflow.
    I am looking for the steps, in which the purchase requisition can be edited straight from the workflow inbox.
    Regards
    Nani

    Hi Nani,
                First you have to confirm what kind of release it is in Purchase req you have Item level release and over all release.
    Item level release - WS00000038
    Over all Release - WS20000077
    Now please confirm with your MM consultant that he has done the release Strategy and tesed it Ok.
    Escecially things like assigning plant, Assigning Agents,Release codes and so on when everything is done by him in SPRO.
    Now your work starts If it is just release use the standard workflow.
    If they need additional notification mails and things like that copy the standard workflow and do the customization in the copied version and deactivate the standard workflow.
    You can also do dead line monitering (Factory Calander) and many more things.
    also please go through these 2 links you will get better idea.
    http://www.****************/Tutorials/Workflow/POReleaseStrategy/Details.htm
    http://www.****************/Tutorials/Workflow/PRRelease/PRRelease1.htm
    If you have any othere queries please feel to ask.
    Regards,
    Dheepak
    Edited by: dheepak on Dec 1, 2008 7:48 PM

Maybe you are looking for