Import a CSV-file into a new table?

hi, im trying to import a csv file into a new tabel, but i just cant make it work :-O. what are the steps to do that? im using sql developer version1.1.2.25.
thanks for helping :-)

We do not support CSV import at this stage, we only support XLS import.
Regards
Sue

Similar Messages

Importing a csv file into addressbook

So I did a search & found this question has come up quite often, but with the person having a slightly different problem, so here goes.
I am trying to import a csv file into address book, when I go import -> text tile it comes up like it should do and I pick the file, if I select ok at this point, it will quite happily import all of the data no trouble (but in the wrong categories). So I make the changes to what I want ie. Phone other --> Phone (work). Then when I click ok, the button goes from blue to white but nothing happens.
When I open the csv file in textedit I can see all the values separated by commas.
Any Ideas?

I too just had this problem. To clarify all fields work and you can map them. I found that the Outlook CSV file had two problems which were tripping up the AddressBook import function. Note these were both in street address fields so I suspect the poster who said that addresses don't work may have been having that problem.
The CSV load program does not work if you have commas "," in your data. In my case this was very common for some European addresses as well as some company names. And then the second problem was if there was a carriage return or new line character in a field. This later one was a problem with the address fields. I suspect an AddressBook export to CSV might have this same issue. Specifically, when there were multiple lines to the street address, they had been entered as multiple lines in street address one, as opposed to entering them in multiple fields such as "street 1", "street 2", etc.
To solve the problem I opened the CSV file using Numbers and did a global find and replace on: commas, substituting the string --- and on the newline character "¶" (ALT+Rreturn) with *.
Note to reduce some of the remapping I also changed all of the labels with "business" in the header row of the CSV file to "work". This made it a little easier for the AddressBook import function to map fields more correctly.
After these set of changes rather than the alternating blue then white with nothing behavior it cleanly loaded all of my names. I could then search for "---" and "*" in addressbook's search field to identify all addresses which I had to clean up.
I hope that is helpful to someone else. The import function really does work. However, it is not robust enough to deal with certain oddities in one's data.

Importing a CSV file into AD 2012r2

Hi Guys
Just wondering if anyone can help, I am a newbie on scripting and finding it really difficult to understand how to import a csv file into AD
I have created the CSV file with the following headers, see below but I am unable to write a powershell script to import them into AD which work, I have tried multiple help guides but still cannot do it for the life of me.
Any help on this would be really appreciated
objectClass user
cn Jo bloggs
givenName jo
sn blogs
mail [email protected]
sAMAccountname j.blogs
AccountPassword Pa$$w0rd
ChangePasswordAtLogon true
PasswordNeverExpires false
ou OU=staff,DC=test,DC=com

Import-Csv C:\User.csv| %{New-ADUser -SamAccountName $_.SamAccountName `
-UserPrincipalName $_.userprinicpalname `
-Name $_.name `
-Mail = $_.mail `
-DisplayName $_.name `
-GivenName $_.GivenName `
-Path "OU=Test Users,DC=XXX,DC=XXX" `
-PasswordNeverExpires $false `
-ChangePasswordAtLogon $true `
-AccountPassword (ConvertTo-SecureString "test41;" -AsPlainText -force) `
-Enabled $True -PasswordNeverExpires $True -PassThru ` }
help New-ADUser -Examples
You can try the below sample code
Regards Chen V [MCTS SharePoint 2010]

How to import an .csv file into the database?

and can we code the program in JSP to import the.csv file into the database.

It is better to use Java class to read the CSV file and store the contents in the database.
You can use JSP to upload the CSV file to the server if you want, but don't use it to perform database operations.
JSPs are good for displaying information on the front-end, and for displaying HTML forms, there are other technologies more suitable for the middle layer, back end and the database layer.
So break you application into
1) Front end - JSPs to display input html forms and to display data retrieved from the database.
2) Middle layer - Servlets and JavaBeans to interact with JSPs. The code that reads the CSV file to parse it's contents should be a Java Class in the middle layer. It makes use of Java File I/O
3) Database layer - Connects to the database using JDBC (Java Database Connectivity), and then writes to the database with SQL insert statements.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Keeping the above concepts in mind, first build a simple JSP and get it to work,
then research on Google , for Java File I/O , discover how to read a file,
Then search on how to readh a CSV file using Java.
After researching you should be able to read the CSV file line by line and store each line inside a Collection.
Then research on Google, on how to write to the database using JDBC
Write a simple program that inserts something to a dummy table in the database.
Then, read the data stored in the Collection, and write insert statements for each records in the collection.

Is there a way to import a .csv file into Numbers?

Can I import a .csv file into Numbers?

Yes, you can import csv (character-separated-values) into Numbers.
If the csv file is comma-separated, then in Numbers you can try File > Open and navigate to the file and open it.
If you don't get the results you want, then try this CSV to Tabs on Clipboard Automator Service (Dropbox download) instead.
To install, double-click the .workflow package and, if necessary, click 'Open Anyway' in System Preferences > Security & Privacy.
Thereafter to use:
In Finder (not Numbers) navigate to the .csv file.
Right-click on the file and choose 'CSV to Tabs on Clipboard' under Services in the contextual menu.
Follow the prompts (trying different separators if needed).
Click once in a Numbers cell.
Command-v to paste. The Numbers table will expand automatically as needed.
These steps are quicker and easier than they sound. Just a few clicks and a keyboard entry.
SG

How do I import one xml file into 3 separate tables in db?

I need to utilize xslt to import one xml file into 3 separate tables: account, accountAddress, streetAddress
*Notice the missing values in middleName, accountType
sample xml
<account>
<firstName>Joe</firstName>
<middleName></middleName>
<lastName>Torre</lastName>
<accountAddress>
<streetAddress>
<addressLine>myAddressLine1</addressLine>
<addressLine>myAddressLine2</addressLine>
</streetAddress>
<city>myCity</city>
<state>myState</state>
<postalCode>mypostalCode</postalCode>
</accountAddress>
<accountId>A001</accountId>
<accountType></accountType>
<account>
I need the following 3 results in 3 separate xml files in order for me to upload into my 3 tables.
Result #1
<rowset>
<row>
<firstName>Joe</firstName>
<lastName>Torre</lastName>
<accountId>A001</accountId>
<row>
<rowset>
Result #2
<rowset>
<row>
<addressId>1</address>
<city>myCity</city>
<state>myState</state>
<postalCode>myPostalCode</postalCode>
<row>
<rowset>
Result #3
<rowset>
<row>
<addressId>1</addressId>
<addressLineSeq>1</addressLineSeq>
<addressLine>myAddressLine1</addressLine>
<row>
<row>
<addressId>1</addressId>
<addressLineSeq>2</addressLineSeq>
<addressLine>myAddressLine2</addressLine>
<row>
<rowset>

Use XSU to store in multiple tables.
"XSU can only store data in a single table. You can store XML across tables, however, by using the Oracle XSLT processor to transform a document into multiple documents and inserting them separately. You can also define views over multiple tables and perform insertions into the views. If a view is non-updatable (because of complex joins), then you can use INSTEAD OF triggers over the views to perform the inserts."
http://download-west.oracle.com/docs/cd/B19306_01/appdev.102/b14252/adx_j_xsu.htm#i1007013

A query while importing an XML file into a Database Table

Hi,
I am Creating an ODI Project to import an XML file into a Database Table.With the help of the following link
http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_project_xml-to-table/odi_project_xml-to-table.htm
I am facing a problem while creating Physical Schema for the XML Source Model.
For the
Schema(Schema)
and
Schema(Work Schema) field they have selected GEO_D.
What is GEO_D here??
or
What I have to select here?
1) schema of the xml file (NB:-I havn't created any .xsd or .dtd file for my .xml file)
or
2)my target servers schema
Please tell me what I'll do??
Thanks

and
Schema(Work Schema) field they have selected GEO_D.
What is GEO_D here??This is the schema name which is specified in the XML file .
What I have to select here?
1) schema of the xml file (NB:-I havn't created any .xsd or .dtd file for my .xml file)Yes
2)my target servers schema
Please tell me what I'll do??
Thanks

Upload a .CSV File into an Internal table

Hi,
What are the parameters to be filled into the Function Modules "GUI_UPLOAD" and "ALSM_EXCEL_TO_INTERNAL_TABLE" to Upload a .CSV File into an internal table.
Please send a sample code to support this....
Regards,
Aadhi.

Hi,
        Check the below code.
TYPE-POOLS: truxs.
TYPES:
BEGIN OF ty_line,
    vbeln LIKE vbap-vbeln,
    posnr LIKE vbap-posnr,
END OF ty_line.
*data: ty_Lines TYPE STANDARD TABLE of ty_Line WITH DEFAULT KEY.
DATA: itab   TYPE STANDARD TABLE OF ty_line WITH DEFAULT KEY.
DATA: itab1 TYPE truxs_t_text_data.
SELECT
vbeln
posnr
UP TO 10 ROWS
FROM vbap
INTO TABLE itab.
CALL FUNCTION 'SAP_CONVERT_TO_CSV_FORMAT'
EXPORTING
    i_field_seperator    = ';'
TABLES
    i_tab_sap_data       = itab
CHANGING
    i_tab_converted_data = itab1
EXCEPTIONS
    conversion_failed    = 1
    OTHERS               = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filename = 'd:\TEMP\test1.txt'
TABLES
    data_tab = itab1
EXCEPTIONS
    OTHERS   = 1.
IF sy-subrc eq 0.
WRITE: 'Data downloaded successfully'.
ENDIF.
DATA: BEGIN OF IEXCEL OCCURS 0.
      INCLUDE STRUCTURE ALSMEX_TABLINE.
DATA: END OF IEXCEL.
PARAMETERS: FILENM   LIKE rlgrap-filename MEMORY ID M01,
            NOHEADER AS CHECKBOX.
call function 'ALSM_EXCEL_TO_INTERNAL_TABLE'
exporting
    filename                      = FILENM
    i_begin_col                   = 1
    i_begin_row                  = 1
    i_end_col                     = 100
    i_end_row                     = 30000
tables
    intern                        = IEXCEL
EXCEPTIONS
    INCONSISTENT_PARAMETERS       = 1
    UPLOAD_OLE                    = 2
    OTHERS                        = 3.
if sy-subrc <> 0.
   WRITE: / 'EXCEL UPLOAD FAILED ', FILENM, SY-SUBRC.
endif.

Importing a CSV file into a table for Fiori

Hello,
I create a fiori application with sap web ide and i need to import a csv file from my desktop and show its content into a table in my fiori application
Please could some one help me
Ameni,
Subject was edited by: Michael Appleby

Hello Jamie
Thank you ,
i try this code , i putted in my detail.view.xml this code :<l:VerticalLayout> <u:FileUploader id="fileUploader" name="myFileUpload" uploadUrl="upload/" width="400px" tooltip="Upload your file to the local server" uploadComplete="handleUploadComplete"/> <Button text="Upload File" press="handleUploadPress"/> </l:VerticalLayout>
and i put in detail.controller.js the 2 functions : handleUploadComplete and handleUploadPress
And when i run and i press in the button to load the file but it doesn't work !
Best Regards,
Ameni,

Import a CSV file into specific cells

Hello,
I have created a simple Numbers template and I want to import a csv file with its values entering specific cells in an automated way.
I think the best way to automate this process would be an AppleScript that does the following:
Selects the csv file;
Parses the values inserting them into the the Numbers template i.e. value1 to cell B2, value2 to cell B3 etc.
Unfortunately I know very little about AppleScript, does anyone have any experience in this area that they could pass on?
My idea would be to place the csv values in an array, and loop through the array entering the values in B2, B3 etc.
Many thanks in advance!
Dougie

Here is a script doing the full job in a single call.
--{code}
--[SCRIPT csv-to-selected-cell]
Enregistrer le script en tant que Script : csv-to-selected-cell.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Bibliothèque:Scripts:Applications :Numbers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner la première cellule du bloc où vous souhaitez insérer les valeurs extraites d'un fichier CSV.
Aller au menu Scripts , choisir Numbers puis choisir “csv-to-selected-cell”
Le script demande de naviquer jusqu’au fichier CSV.
Il en lit le contenu,
remplace les séparateurs (";" ou ",") par des TABs
copie les données dans le presse-papiers
colle dans la table.
--=====
L’aide du Finder explique:
L’Utilitaire AppleScript permet d’activer le Menu des scripts :
Ouvrez l’Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case “Afficher le menu des scripts dans la barre de menus”.
Sous 10.6.x,
aller dans le panneau “Général” du dialogue Préférences de l’Éditeur Applescript
puis cocher la case “Afficher le menu des scripts dans la barre des menus”.
--=====
Save the script as a Script: csv-to-selected-cell.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select the first cell of the block where values extracted from a CSV file must be inserted.
Go to the Scripts Menu, choose Numbers, then choose “csv-to-selected-cell”
The script urge you to navigate to the CSV file.
It read its contents,
replace the delimiters (";" or ",") by TAB chars
copy the datas in the clipboard
paste in the table.
--=====
The Finder’s Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the “Show Script Menu in menu bar” checkbox.
Under 10.6.x,
go to the General panel of AppleScript Editor’s Preferences dialog box
and check the “Show Script menu in menu bar” option.
--=====
Yvan KOENIG (VALLAURIS, France)
2012/01/18
--=====
on run
          local dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2, lesValeurs
          my activateGUIscripting()
Extract parameters describing the target cell *)
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
Choose the source CSV file *)
choose file of type {"csv"}
Get the file’s contents *)
          set lesValeurs to read result
Grab the delimiter in use *)
          if lesValeurs contains ";" then
          else
          end if
Replace the delimiter in use by TAB *)
          my remplace(lesValeurs, result, tab)
Move the 'normalized' datas to the clipboard *)
set the clipboard to result
Reset the target cell in case something changed *)
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set selection range to range (name of cell colNum1 of row rowNum1)
          end tell
Paste matching style *)
          my raccourci("Numbers", "v", "cas")
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
on get_SelParams()
          local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
          tell application "Numbers" to tell document 1
                    set d_Name to its name
                    set s_Name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_Name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_Name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if
                    end if
                    tell sheet s_Name to tell (first table where selection range is not missing value)
                              tell selection range
                                        set {top_left, bottom_right} to {name of first cell, name of last cell}
                              end tell
                              set t_Name to its name
                              tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                              if top_left is bottom_right then
                                        set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                              else
                                        tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                              end if
                    end tell -- sheet…
                    return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
          end tell -- Numbers
end get_SelParams
--=====
on parleAnglais()
          local z
          try
                    tell application "Numbers" to set z to localized string "Cancel"
          on error
                    set z to "Cancel"
          end try
          return (z is not "Annuler")
end parleAnglais
--=====
on decoupe(t, d)
          local oTIDs, l
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d
          set l to text items of t
          set AppleScript's text item delimiters to oTIDs
          return l
end decoupe
--=====
replaces every occurences of d1 by d2 in the text t
on remplace(t, d1, d2)
          local oTIDs, l
          set oTIDs to AppleScript's text item delimiters
          set AppleScript's text item delimiters to d1
          set l to text items of t
          set AppleScript's text item delimiters to d2
          set t to "" & l
          set AppleScript's text item delimiters to oTIDs
          return t
end remplace
--=====
on activateGUIscripting()
(* to be sure than GUI scripting will be active *)
          tell application "System Events"
                    if not (UI elements enabled) then set (UI elements enabled) to true
          end tell
end activateGUIscripting
--=====
==== Uses GUIscripting ====
This handler may be used to 'type' text, invisible characters if the third parameter is an empty string.
It may be used to 'type' keyboard raccourcis if the third parameter describe the required modifier keys.
I changed its name « shortcut » to « raccourci » to get rid of a name conflict in Smile.
on raccourci(a, t, d)
          local k
activate application a
          tell application "System Events" to tell application process a
                    set frontmost to true
                    try
                              t * 1
                              if d is "" then
key code t
                              else if d is "c" then
key code t using {command down}
                              else if d is "a" then
key code t using {option down}
                              else if d is "k" then
key code t using {control down}
                              else if d is "s" then
key code t using {shift down}
                              else if d is in {"ac", "ca"} then
key code t using {command down, option down}
                              else if d is in {"as", "sa"} then
key code t using {shift down, option down}
                              else if d is in {"sc", "cs"} then
key code t using {command down, shift down}
                              else if d is in {"kc", "ck"} then
key code t using {command down, control down}
                              else if d is in {"ks", "sk"} then
key code t using {shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "k" then
key code t using {command down, shift down, control down}
                              else if (d contains "c") and (d contains "s") and d contains "a" then
key code t using {command down, shift down, option down}
                              end if
                    on error
                              repeat with k in t
                                        if d is "" then
keystroke (k as text)
                                        else if d is "c" then
keystroke (k as text) using {command down}
                                        else if d is "a" then
keystroke k using {option down}
                                        else if d is "k" then
keystroke (k as text) using {control down}
                                        else if d is "s" then
keystroke k using {shift down}
                                        else if d is in {"ac", "ca"} then
keystroke (k as text) using {command down, option down}
                                        else if d is in {"as", "sa"} then
keystroke (k as text) using {shift down, option down}
                                        else if d is in {"sc", "cs"} then
keystroke (k as text) using {command down, shift down}
                                        else if d is in {"kc", "ck"} then
keystroke (k as text) using {command down, control down}
                                        else if d is in {"ks", "sk"} then
keystroke (k as text) using {shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "k" then
keystroke (k as text) using {command down, shift down, control down}
                                        else if (d contains "c") and (d contains "s") and d contains "a" then
keystroke (k as text) using {command down, shift down, option down}
                                        end if
                              end repeat
                    end try
          end tell
end raccourci
--=====
--[/SCRIPT]
--{code}
Yvan KOENIG (VALLAURIS, France) mercredi 18 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan

Import a CSV file into contacts

I am trying to import a CSV file; a comma seperated list of email addresses. When I try to import them into contacts, contacts attempts to combine the entire email list as seperate fields of a single contact. What am I doing wrong? I am trying to import just the list of email addresses so that each email address is a seperate contact. The list does not have names or addresses, just emails. Please help.

Hey IAmWallace!
I have an article here that can address this question for you and tell you how to import these email addresses:
Address Book 6.x: Import contacts
http://support.apple.com/kb/PH4648
Take care, and thanks for visiting the Apple Support Communities.
-Braden

I want to import a MP3 file into a new garageband project

I want to import an MP3 or any garageband compatible file into a new garageband project. I am using existing learn to play tracks and I create a guitar track to play along but I would like to import other external tracks. Suggestions please.

terryfromrockland wrote:
I want to import an MP3 or any garageband compatible file
http://www.bulletsandbones.com/GB/GBFAQ.html#importaudio
(Let the page FULLY load. The link to your answer is at the top of your screen)

How to import from CSV file into INTERVAL DAY TO SECOND column?

Hello,
I need to import data from a csv file that has a column that stores time-intervals (e.g. 2:06:02 Hours:Minutes:Seconds) into a table column INTERVAL DAY TO SECOND.
Does any of you know what format I should apply?
I tried HH:MI:SS but it didn't work.
Any suggestion is welcomed (including changing the column type to something else that might hold time-intervals in it....).
Thanks,
Andrei

Andrei,
There is no native support for the INTERVAL datatype in the Text loading facilities of Application Express.
To work around this known limitation, I suggest either creating a temporary table or a shadow column in your existing table. You could then upload your data for the interval as a VARCHAR2 and then use SQL to convert to an appropriate interval value.
For example:
1) Create a table with:
create table foo (id number primary key, i interval day to second, shadowi varchar2(4000) )2) Using your sample data set, load this data into table FOO, loading the second column of this data into column SHADOWI
1     01:06:02
2     02:06:02
3     03:01:013) Issue the following SQL to convert the value in your shadow interval column to your actual interval column
update foo set i = to_dsinterval( '0 ' || shadowi )Note that you'll need to prepend the '0' to formulate a valid interval literal value.
Joel

Import from csv file into a oracle database

Hi,
like i wrote in the subject i want to import some data from a csv file
and transform it into a database.
Its a simple setup,
- FA which reads with a self defined schema from a physical path
- Receive activity which creates an instance
- transform activity
- invoke which invokes the database adapter to fill a single table
- deploy it to a application server
I cant get it done.
What i achieved is to fill the table with one set (one row of the csv file),
but the other rows are untouched.
Does somebody know where i have to look for some errors.
The Auditing tool from the app server shows no errors.
I could also provide some screenshots.
Any help would be appreciated, i am really desperate :(
Thanks in Advance
Sven Richter

Hi
1) Is the File Adapter reading the correct number of lines in the csv file?
2) If yes, after the transformation, how many lines are there in the resulting variable?
Solutions:
1) If the FA is not reading all lines, the problem for sure is the XSD you are using. The XSD must define an element which must occurs many times. You do this using a correct XSD construction with the "maxoccurs=unbounded" atribute.
2) If the problem is with the transformation activity, you shoud use "for each" xsl node, otherwise the transformation just pick one line.
[]´s
Menezes

Importing several CSV files into Excel

Hello Everyone,
I managed to piece together this code which runs several powershell scripts that each output a CSV for every day of the week.
Next, I located a function that takes a CSV file as input and exports that as a worksheet in an Excel document.
My problem is, the last column in the Excel file should be the first column and I just cannot spot why this behavior is occuring.
#First phase, output CSV files used later in the script.
Monday.ps1
Tuesday.ps1
Wednesday.ps1
Thursday.ps1
Friday.ps1
Saturday.ps1
Sunday.ps1
#Now the function to export the CSV from Phase 1 into an Excel Spreadsheet.
function Export-Excel {
[cmdletBinding()]
Param([Parameter(ValueFromPipeline=$true)][string]$junk)
begin{
$header=$null
$row=1
process{
if(!$header){
$i=0
$header=$_ | Get-Member -MemberType NoteProperty | select name
$header | %{$Global:ws.cells.item(1,++$i)=$_.Name}
$i=0
++$row
foreach($field in $header){
$Global:ws.cells.item($row,++$i)=$($_."$($field.Name)")
$xl=New-Object -ComObject Excel.Application
$wb=$xl.WorkBooks.add(1)
$Global:ws=$wb.WorkSheets.item(1)
$Global:ws.Name='Sunday'
import-csv 'C:\Sunday.csv' | Export-Excel
$Global:ws=$wb.WorkSheets.Add()
$Global:ws.Name='Saturday'
import-csv 'C:\Saturday.csv' | Export-Excel
$Global:ws=$wb.WorkSheets.Add()
$Global:ws.Name='Friday'
import-csv 'C:\Friday.csv' | Export-Excel
$Global:ws=$wb.WorkSheets.Add()
$Global:ws.Name='Thursday'
import-csv 'C:\Thursday.csv' | Export-Excel
$Global:ws=$wb.WorkSheets.Add()
$Global:ws.Name='Wednesday'
import-csv 'C:\Wednesday.csv' | Export-Excel
$Global:ws=$wb.WorkSheets.Add()
$Global:ws.Name='Tuesday'
import-csv 'C:\Tuesday.csv' | Export-Excel
$Global:ws=$wb.WorkSheets.Add()
$Global:ws.Name='Monday'
import-csv 'C:\Monday.csv' | Export-Excel
$xl.Visible=$true

That is interesting considering this script I found on Hey Scripting Guy.
http://blogs.technet.com/b/heyscriptingguy/archive/2010/09/09/copy-csv-columns-to-an-excel-spreadsheet-by-using-powershell.aspx
I have run your version above and have no issues with order.
I still recommend using WorkBook.OpenText($csvfile)
and
$wb.Sheets($csvfile).Move($wb2.Sheet(1))
This is much faster and takes much less code.
¯\_(ツ)_/¯
Could you give a terse example? I'm trying to put something together but am not having much success.
$sheets = @(LS D:\Scripts\work | select FullName -ExpandProperty FullName)
$Excel = New-Object -ComObject excel.application
$Excel.visible = $false
$file = $Excel.Workbooks.Open("C:\tmp\mytest.xlsx")
#$wb2 = $file.Sheets
for ($i=0; $i -lt $sheets.length; $i++)
$workbook = $Excel.WorkBooks.OpenText($sheets[$i])
$workbook.Sheets($sheets[$i]).Move($file.Sheet(1))
$Excel.visible = $true

Import a CSV-file into a new table?

Similar Messages

Maybe you are looking for