Import and export MDM with the SAP Portal

Hi,
Would you have any clue on how to handle import and export from the SAP portal ?
I need your help because I haven't found any standard iView to perform these functions
The only information i got were some explanations on WebDynpro Java iViews using events to export from the Portal.
Thank you in advance

Hi,
MDM iViews are only meant to perform MDM Data Manager operations but on limited basis. EP-MDM scenario has been designed for end users only which should not allow to perform complex data manager operations and they need not install MDM Clients.
Thats why importing and exporting functionalities are not possible in standard MDM iviews.
Regards,
Jitesh Talreja

Similar Messages

Import and Export variables with same name

The nco3 throws and exception when a function has Import and Export variables with the same name.
An example is BAPI_BATCH_CREATE.
At the moment my solution is create a ZBAPI_BATCH_CREATE that wraps the original BAPI but has diferent names for import and export variables (IBATCH and OBATCH for BATCH variable).
Anyone has another more clean solution?
VB.NET CODE:
pFunct = foRFCDest.Repository.CreateFunction(fsFunctionName)
This is the error message:
SAP.Middleware.Connector.RfcInvalidStateException was unhandled
Message=Lookup of function BAPI_BATCH_CREATE metadata failed for destination SAPTST
Source=sapnco
StackTrace:
       en SAP.Middleware.Connector.RfcRepository.LookupFunctionMetadataClassic(String name)
       en SAP.Middleware.Connector.RfcRepository.LookupFunctionMetadata(String name)
       en SAP.Middleware.Connector.RfcRepository.GetFunctionMetadata(String name)
       en SAP.Middleware.Connector.RfcRepository.CreateFunction(String name)
       en SapNetConnectorWrapper.FunctionBase..ctor(RfcDestination foDest, String fsFunctionName) en C:00_Compac201101_LibreriasSapNetConnectorWrapperFunctionBase.vb:línea 11
       en SapNetConnectorWrapper.BAPIS.Bapi_Batch_Create..ctor(RfcDestination foDest) en C:00_Compac201101_LibreriasSapNetConnectorWrapperBAPISBapi_Batch_Create.vb:línea 16
       en clsEtiquetadoTNPCommon.BLLEtiquetadoTNP.CrearLote(DynamicSqlEntity& foRegCabecera, DynamicSqlEntity& foRegNotificacion) en C:00_Compac201100_EtiquetadoTNP_PTEtiquetadoTNP_PTclsEtiquetadoTNPCommonBLLEtiquetadoTNP.vb:línea 515
       en clsEtiquetadoTNPCommon.BLLEtiquetadoTNP.CrearLotesPendientes() en C:00_Compac201100_EtiquetadoTNP_PTEtiquetadoTNP_PTclsEtiquetadoTNPCommonBLLEtiquetadoTNP.vb:línea 602
       en WAEtiquetadoTNP.Form1.Timer1_Tick(Object sender, EventArgs e) en C:00_Compac201100_EtiquetadoTNP_PTEtiquetadoTNP_PTWAEtiquetadoTNPForm1.vb:línea 25
       en System.Windows.Forms.Timer.OnTick(EventArgs e)
       en System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m)
       en System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
       en System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg)
       en System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
       en System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
       en System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
       en System.Windows.Forms.Application.Run(ApplicationContext context)
       en Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
       en Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
       en Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
       en WAEtiquetadoTNP.My.MyApplication.Main(String[] Args) en 17d14f5c-a337-4978-8281-53493378c1071.vb:línea 81
       en System.AppDomain._nExecuteAssembly(Assembly assembly, String[] args)
       en System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
       en Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
       en System.Threading.ThreadHelper.ThreadStart_Context(Object state)
       en System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
       en System.Threading.ThreadHelper.ThreadStart()
InnerException: SAP.Middleware.Connector.RfcInvalidParameterException
       Message=Cannot add BATCH to FUNCTION BAPI_BATCH_CREATE: an element with that name already exists
Source=sapnco
       StackTrace:
            en SAP.Middleware.Connector.RfcContainerMetadata`1.AddElement(T element)
            en SAP.Middleware.Connector.RfcFunctionMetadata.AddParameter(RfcParameterMetadata parameterMetadata)
            en SAP.Middleware.Connector.RfcRepository.LookupFunctionMetadataClassic(String name)
       InnerException:

Hi Raul
Even I am getting the same error for below BAPI
Lookup of function BAPI_FAMILY_CREATE metadata failed for destination
Inner Exception: Message     "Cannot add EMPLOYEENUMBER to FUNCTION BAPI_FAMILY_CREATE: an element with that name already exists"     string
I am using the new NCO 3.0.2.0 x64 version.
Is there any other solution other than creation of Z BAPI.

TIME on ESS/MSS with the SAP Portal, release ERP2005 ECC6.

Hello,
I need to implement TIME (Leave request) on ESS/MSS with the SAP Portal, release ERP2005 ECC6.
Any informations about the customizing for a proof of concept would be appreciated.
All the back-end (R/3) as allready been customized.
Thanks for your responses.
Olivier

Hello,
If you already have all the templates and such configured then its easy. We don't have ESS and only one MSS scenario. However we support the web environment via BSP HAP_DOCUMENT. You can include our list pages in an Iview and assign that to the ESS or MSS scenario in the portal.
They also run stand alone, so you can test it as well without configuring the portal.
See also <a href="/people/sap.user72/blog/2007/02/20/objective-setting-appraisals-the-web-environment bloggy</a> on OSA and the web Environment, especially the last part will be of interest for you.
Regards and Groetjes,
Maurice

Importing and Exporting Data with a Clob datatype with HTML DB

I would like to know what to do and what to be aware of when Importing and Exporting data with a Clob Datatype with HTML DB?

Colin - what kind of import/export operation would that be, which pages are you referring to?
Scott

What is the best way to import and export footage from the 5D Mark II?

Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!

ascreenwriter wrote:
Hello,
I've just finished shooting what I am considering to be my directorial masterpiece. Shot it on the Canon 5D (1080p, 24fps), and the footage looks amazing. Now I am ready to start editing and have been using premiere lately, but I have yet to figure out the proper pipeline. I want to know the best way to retain resolution before I delve into this project.
My questions:
1) What is the best way to start a new project and import the footage without having to render whilst editing, so as to retain all resolution and originality of the source footage?
2) What is the best way/ codec/ format to export this same footage once editing is complete so as to retain that crisp 1080p for which the 5D is so recognized?
3) What is the best way/ codec/ format to import and export/ render between premiere and after effects? I am speaking mostly of vfx and color correction. I also have some 30fps footage that I intend to slow down in AE and then import into premiere.
I know this is pretty broad, but as a solo filmmaker I really need someone's guidance. I rarely ever finish my films with the same, crisp look as the footage. I need pipeline help, and really appreciate it!
1. Follow the advice above. Also use the Media Browser to import the footage in case you have spanned media files. Import files with the Media Browser.
2. It largely depends on what you wish to ouput to: Blu-ray, web, etc. This FAQ gives the best answer: What are the best export settings?
3. Use the Replace with Adobe After Effects Composition function.

Error message using SQL import and Export Wizard with Excel spread sheet

I am trying to import an Excel spreadsheet using the Import export wizard that is provided with SQL 2014.
Everything seems to set up OK but then when I go to do the transfer "error message" comes up saying:
External Table is not in the expected format.(Microsoft Jet Database Engine).
This is a spreadsheet and there is no database, that is why I want to import it into a database!! So the reference to JET is a tad disappointing.
So why the error and how do I fix the problem?
As there are over 100 variables in the spread sheet rows, it would be great to have this automatically create the database and populate the fields.
I am using SQL 2014 Express and Office Excel 2013.
Thank you in advance for taking the time to read this, and hopefully sheading some light on the issue.

Hi AWlcurrent,
When import a .xlsx file to SQL Server using SQL Server Import and Export Wizard, you see a “External Table is not in the expected format.(Microsoft Jet Database Engine).” error message. This error message seems that the Microsoft JET Database Engine is
unable to handle something that is contained in the file.
So please make sure there is no unsupported content in the Excel file. Alternatively, we can use ‘Microsoft Excel’ as the Data Source, then Select ‘Microsoft Excel 2007’ as the Excel version to import the excel file.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support

Drag and Drop Functionality within the SAP Portal

Does anyone know if SAP Netweaver Portal 6.0 sp18 supports drag and drop technology. A good comparison would be Google where a user can drag iViews around and place them where they would like.
We are trying to build something similar to Google Gadgets with iViews and we would like our users to be able to add, remove, drag, and drop them in the Portal.
Has anyone done something similar to where I would be able to leverage them for further questions.
Any help is greatly appreciated. Thank you.
Jason

Hi
Were you able to find away of using the drag and drop functionality?
I am wanting to use a similar functionality to Yahoo where people can just drag the iViews they want into the page and saving their personalised settings. I am unable to find information as to what Portal release supports this functionality and how it works. Would you be able to help?
Many thanks
Jag

Motion tracking and exporting layers with the background video

Is it possible to apply the motion tracking data to a new object in a new layer and then output, or export, that layer as an overlay plane (or perhaps in the alpha channel) so that the new object can be interactive (perhaps in a flash swf format)?
I would like to create an interactive layer of objects (created through motion tracking) above a background video layer.
Is After Effects the right tool for this job?

You are severely oversimplifying the matter. Interaction means establishing rules and this in turn requires programming. Ergo, you absolutely cannot avoid Flash and ActionScript. You can certainly do the tracking in AE and then use CS4's "Export to Flash" feature to get the raw setup into Flash, but the work doesn't stop there. For older versions of AE you will need alternate ways to import the tracking data, e.g. by ways of text files, but really, this is much more a Flash topic than one for the AE community, so better ask your questions there.
Mylenium

Import and Export transport requests on Netweaver 2004s Sp11 Sneak Preview

Hi Experts,
I have configured the transportation system <STMS> in order to import and export transport requests on the NSP system. The configuration is working properly as files can be imported and exported out of the C:\sapmnt\trans directory. (configuration distributed by STMS -> Overview -> Systems -> Extras -> Distribute TMS Configuration, Folder SAPMNT shared).
The problem I'm facing with the import of some example transports is given by the hanging import queues. In phase 'Import ABAP Dictionary Objects' I have the following message for almost all objects -> '... was not imported in this step'.
I tried to solve this issue by running SE38->RDDNEWPP with DDIC user to schedule job RDDIMPDP for TP imports. I also made the config in TP_DOMAIN_NSP.PFL with SYSTEM_PF = C:\SAP\NSP\SYS\profile\DEFAULT.PFL.
The error is still in logfile SLOG0732.NSP
ERROR:       The following call returned with exit code 7:
ERROR:         sapevt.exe SAP_TRIGGER_RDDIMPDP -t name=NSP
and logfile dev_evt
ERROR ***: MsSndTypeOnce, rc = -20
ERROR ***: Event raise failed
With the exports there is a similar issue in the EXPORT phase, given the note
0 entries from WDY_APPLICATIONT exported.
Batch process is available (parameter rdisp/wp_no_btc = 1)
Profile has been activated by rz10->utilities->import profile->ofactive servers.
Any ideas what still can be wrong? Does the import export and DDIC activation really work with the sneak preview?
Thanks
Christoph

Hi Peter
First of all thanks for your advice.
I did No. 1. 2. 3. steps.
Step 4. reacts with the folowing error message.
Transport control program tp ended with error code 02008.
Errors: error in transportprofile (param missing, unknown).
My license expires in four days. I tried to extend it via http://www.sap.com/minisap
1. System-ID *
2. Hardware-Schlüssel (HWID) *   ?
3.Systemnummer ?
What is to be entered in 1 and 2.
Where should I look for HWID and Sysnr ?
Thanks a lot again for your help
With regards
Fisseha

Authorization - import and export .tpz

Hi Experts,
I want the users to have access to import and export objects in the integration builder. How do I do this?
Tools -> Import/export design/configuration objects
Regards
/Claes

Hi Claes,
I dont think theres any authorization object which you can use. the role i mentioned earlier is mapped with JAVA Groups and actions.
You can login to J2EE Visual admin and do your own research :).
The role i mentioned earlier will help you for sure but along with that role comes lotz of other authorizations.
Regards,
Sumit

The Projects screen to import and export SAP xApp Manufacturing Integration

Hello:
On my SAP Discovery Server, On the Projects screen to import and export SAP xApp Manufacturing Integration and Intelligence (SAP xMII) projects.
Under the projects listed I see one Default project, is listed as a System Project.
I did an import and used one of the sample application, along with the ExportManifest.xml file.
"You can create an external project structure, include it in a zip file, and import it as a new project. You do not need an ExportManifest.xml file to import a project."
Now I see two projects listed as System Projects, is that ok, would that cause any issues? Is there any way that I could correct this?
Note:
If you import a project that already exists, the system overwrites the current project structure and files.
You can import hidden projects that do not appear on the Projects screen or in the SAP xMII Workbench. System-defined projects may appear in the Projects screen and in the SAP xMII Workbench, but you cannot delete them. You can import a project with the same name as a hidden or system-defined project and overwrite its properties. If you do this, they are no longer considered to be hidden or system-defined projects.
Thank you,

You could consider creating a project and exporting it to see the proper format of the zip file, including the ExportManifest. You should find attributes in the xml for setting the description, system type, etc.

Internal table with Import and Export

Hi All,
Hi all
Please let me know the use of <b>Internal table with Import and Export parameters and SET/GET parameters</b>, on what type of cases we can use these? Plese give me the syntax with some examples.
Please give me detailed analysis on the above.
Regards,
Prabhu

Hi Prabhakar,
There are three types of memories.
1. ABAP MEMORY
2. SAP MEMORY
3. EXTERNAL MEMORY.
1.we will use EXPORT/ IMPORT TO/ FROM MEMORY-ID when we want to transfer between ABAP memory
2. we will use GET PARAMETER ID/ SET PARAMETER ID to transfer between SAP MEMORY
3. we will use EXPORT/IMPORT TO/FROM SHARED BUFFER to transfer between external memory.
ABAP MEMORY : we can say that two reports in the same session will be in ABAP MEMORY
SAP MEMORY: TWO DIFFERENT SESSIONS WILL BE IN SAP MEMORY.
for ex: IF WE CALL TWO DIFFERENT TRANSACTIONS SE38, SE11
then they both are in SAP MEMORY.
EXTERNAL MEMORY: TWO different logons will be in EXTERNAL MEMORY.
<b>Syntax</b>
To fill the input fields of a called transaction with data from the calling program, you can use the SPA/GPA technique. SPA/GPA parameters are values that the system stores in the global, user-specific SAP memory. SAP memory allows you to pass values between programs. A user can access the values stored in the SAP memory during one terminal session for all parallel sessions. Each SPA/GPA parameter is identified by a 20-character code. You can maintain them in the Repository Browser in the ABAP Workbench. The values in SPA/GPA parameters are user-specific.
ABAP programs can access the parameters using the SET PARAMETER and GET PARAMETER statements.
To fill one, use:
SET PARAMETER ID <pid> FIELD <f>.
This statement saves the contents of field <f> under the ID <pid> in the SAP memory. The code <pid> can be up to 20 characters long. If there was already a value stored under <pid>, this statement overwrites it. If the ID <pid> does not exist, double-click <pid> in the ABAP Editor to create a new parameter object.
To read an SPA/GPA parameter, use:
GET PARAMETER ID <pid> FIELD <f>.
This statement fills the value stored under the ID <pid> into the variable <f>. If the system does not find a value for <pid> in the SAP memory, it sets SY-SUBRC to 4, otherwise to 0.
To fill the initial screen of a program using SPA/GPA parameters, you normally only need the SET PARAMETER statement.
The relevant fields must each be linked to an SPA/GPA parameter.
On a selection screen, you link fields to parameters using the MEMORY ID addition in the PARAMETERS or SELECT-OPTIONS statement. If you specify an SPA/GPA parameter ID when you declare a parameter or selection option, the corresponding input field is linked to that input field.
On a screen, you link fields to parameters in the Screen Painter. When you define the field attributes of an input field, you can enter the name of an SPA/GPA parameter in the Parameter ID field in the screen attributes. The SET parameter and GET parameter checkboxes allow you to specify whether the field should be filled from the corresponding SPA/GPA parameter in the PBO event, and whether the SPA/GPA parameter should be filled with the value from the screen in the PAI event.
When an input field is linked to an SPA/GPA parameter, it is initialized with the current value of the parameter each time the screen is displayed. This is the reason why fields on screens in the R/3 System often already contain values when you call them more than once.
When you call programs, you can use SPA/GPA parameters with no additional programming overhead if, for example, you need to fill obligatory fields on the initial screen of the called program. The system simply transfers the values from the parameters into the input fields of the called program.
However, you can control the contents of the parameters from your program by using the SET PARAMETER statement before the actual program call. This technique is particularly useful if you want to skip the initial screen of the called program and that screen contains obligatory fields.
Reading Data Objects from Memory
To read data objects from ABAP memory into an ABAP program, use the following statement:
Syntax
IMPORT <f1> [TO <g 1>] <f 2> [TO <g 2>] ... FROM MEMORY ID <key>.
This statement reads the data objects specified in the list from a cluster in memory. If you do not use the TO <g i > option, the data object <f i > in memory is assigned to the data object in the program with the same name. If you do use the option, the data object <f i > is read from memory into the field <g i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
You do not have to read all of the objects stored under a particular name <key>. You can restrict the number of objects by specifying their names. If the memory does not contain any objects under the name <key>, SY-SUBRC is set to 4. If, on the other hand, there is a data cluster in memory with the name <key>, SY-SUBRC is always 0, regardless of whether it contained the data object <f i >. If the cluster does not contain the data object <f i >, the target field remains unchanged.
Saving Data Objects in Memory
To read data objects from an ABAP program into ABAP memory, use the following statement:
Syntax
EXPORT <f1> [FROM <g 1>] <f 2> [FROM <g 2>] ... TO MEMORY ID <key>.
This statement stores the data objects specified in the list as a cluster in memory. If you do not use the option FROM <f i >, the data object <f i > is saved under its own name. If you use the FROM <g i > option, the data objet <g i > is saved under the name <f i >. The name <key> identifies the cluster in memory. It may be up to 32 characters long.
Check this link.
http://www.sap-img.com/abap/difference-between-sap-and-abap-memory.htm
Thanks,
Susmitha.
Reward points for helpful answers.

Problem with Import and Export Data Wizard

Downloaded and installed SQL Server Express 2008 R2 today because I want to explore how Access interacts with SQL Server (using my home computer). I'm using Access 2010 (under Windows 7), so the 2008 version of SQL Server Express seemed to be the version
to use.
After a couple of false starts, installation appeared to go okay. After the installation. My Start menu listed Microsoft SQL Server 2008 and Microsoft SQL Server 2008 R2. The latter listed Import and Export Data (64-bit). When I clicked that, the first Import
and Export Data Wizard page was displayed. I wasn't ready at that time to explore the wizard, so I closed it. An hour or so later I again attempted to open the Import and Export Data wizard. This time, the wizard didn't open. Instead this error message was
displayed: "The SSIS Runtime object could not be created. Verify that DTS.dll is available and registered."
I found DTS.dll on my computer at C:\Program Files\Microsoft SQL Server\100\DTS\Binn, so the file is available, but don't know whether it is registered.
How can I correct this problem?

First can you please post all log file errors
>> I can't really give you a solution or specific recommendation since I did not saw this error yet myself, but on your own risk you can try:
1. You may try to just register 'dts.dll' using regsvr32.exe, but this error may indicate a bigger problem with setup.
If you are running SQL Server 64bit then try running this at the command prompt: %windir%\syswow64\regsvr32 "%ProgramFiles(x86)%\Microsoft SQL Server\90\dts\binn\dts.dll"
2. You can try reinstall from start (In this case you have to make sure that you un-install all)
[Personal Site] [Blog] [Facebook]

Import and export of word files with references (iPAD)

Hi,
Does Pages for iPAD supports importing and exporting of files with references generated by the prog "ENDNOTE" (http://www.endnote.com/). it s a must for grants and papers writing.
is their any way to ask the apple guys directly (new to the apple world...)
Thanks,

obsidan wrote:
Hi,
Does Pages for iPAD supports importing and exporting of files with references generated by the prog "ENDNOTE" (http://www.endnote.com/). it s a must for grants and papers writing.
Pages for iPad does not support export/import of Endnote references in the form of formatted bibliography.
is their any way to ask the apple guys directly (new to the apple world...)
Yes, indeed, feedback directly to Apple is possible
http://www.apple.com/feedback/ipad.html
While Pages does not currently import/export and preserve the Endnote formatted bibliography, another app known as Documents to go does; there is not citation software for adding references though, but preservation is good.

Import and Export sections of material present in the Timeline

Hi,
I know it is possible with Premiere EL 11 to import and export titles.
I have an existing movie and am working on a new one. I wish to utilize part of what I created on the previous movie. Is it possible to copy part of the old movie and paste it into my new project being a different file? If yes, how to?
If not, then I start understanding why they sell EL for.
Thank you

If you wish to move the elements in the Timeline, separate, then you will need a ClipBoard Extender app., like ClipMate, to Copy the desired Clips, Titles, etc., then Open a different Project move the CTI (Current Time Indicator) to the desired location, and Paste. You cannot do that, without a Clipboard Extender.
If you are using the WAB (Work Area Bar) to Export/Share a portion of the Timeline, you will NOT get the separate elements, i.e. Clips, Titles, etc., but an AV file, with those written to the new, output file. Editing that output file will be tougher, as the elements are now all combined, and all Handles in Clips, etc., will not be included. If one goes that route, then MPEG would not be my choice, and I would go with one of the suggestions in this article: http://forums.adobe.com/message/4556586#4556586
Remember, with that output method, the Clips (Audio & Video) will NOT have any Handles, and Titles will be burned in.
From your comments, I think that you want the ClipMate (or similar) workflow.
Good luck,
Hunt

Import and export MDM with the SAP Portal

Similar Messages

Maybe you are looking for