Import AP Invoices with more than one Prepayment Application

Hi,
We have a requirement to import AP Invoices from the legacy system with more than one prepayment application to the invoice.
The AP_INVOICES_INTERFACE table provides only one column for Prepayment Number. Also, more than one line can not be created for the same invoice number.
Is there any solution to the above situation?
Gajendra

Dear Srikanth,
Thanks a lot for your reply.
We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
This is my question.
It will be appreciated highly if you give me a solution.
Thanks!
Xingjun Han

Similar Messages

  • When I import a cd with more than one artist iTunes separates each individual artist - how do I get it to show the album as a whole rather than individual artist?

    When I import a cd with more than one artist itunes shows each artist's song separately and won't group the album as a whole - this is incredibly frustrating something that Windows media player doesn't do. Does anyone have a simple cure for this annoyance?

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

  • Cannot Add Invoices with more than one costing centers by SDK.

    Have no available DI Interface to access cost/profit center
    Cannot Add Invoices with more than one costing centers by SDK.

    Dear Srikanth,
    Thanks a lot for your reply.
    We want add a invoice with DI API, but the DI API provide only one costing center: CostingCode in Document_Lines Object. But we have two costing centers, one is department, the other is salesperson.
    This is my question.
    It will be appreciated highly if you give me a solution.
    Thanks!
    Xingjun Han

  • Can not import excel spreadsheet with more than one spreadsheet from an email

    i get excel files sent to me all the time by email and have been able to open most of them.  Went to a apple store and was told i needed to install numbers app on my iphone 4 to open them up because their was more than likely two or more work sheets in that file. i am on the road and can't get to my imac.  I bought numbers did all the updates on the iphone and sync to itunes.  it still cant open the spreadsheets if they have more than one work sheet. it does ask do you want to open in numbers i answer the question it starts the import then get error message spreadsheet couldn't be imported.  the file format is invalid.
    this is frustrating to by an app that was suggested by apple for the solution and it doesn't work.
    by the way i have excel on the macbook pro and imac so that is not an issue need to be able to see on the phone while traveling.
    by the way it says microsoft excel 97-2004 worksheet 16 kb open in "numbers"
    Any suggestions

    Hi Caroline
    you should be able to apply the exact same principles to your multi query report. The XML will have a main root node and then the results of the queries underneath.
    So if you had 3 queries you'd get something like
    <REPORTNAME>
    <G_FIRST_QUERY>
    </G_FIRST_QUERY>
    <G_SECOND_QUERY>
    <G_SECOND_QUERY>
    <G_THIRD_QUERY>
    <G_THIRD_QUERY>
    </REPORTNAME>
    In the template you will be able to map on to the separate sections of the XML very easily.
    regards, Tim

  • BizTalk:How to share customized pipeline with more than one BizTalk Application

    I have a new BizTalk application which will use a customize generic pipeline . This pipeline has been used in an existing BizTalk application.
    When I use BizTalk Server Administration to add this pipeline assembly as a resource for a new BizTalk application, it shows error message: "this biztalk assembley has already in store and is either associated with another application or another type".
    My questions is how to share the generic pipeline component with many BizTalk application?
    Many Thanks.

    Hi,
    If you plan on using the deployed pipeline across multiple applications in BizTalk you have two options:
    1) The Current Application (in BizTalk Server Administration Console) should have the other application [where the pipeline
    is deployed] as reference.
    right click the "Current Application" and select "Properties"
    on the "Properties" page, left hand side, select "References"
    On the right-hand side, use "Add" to add the "Other Application" as a reference.
    Refer: How
    to Add a BizTalk Assembly to an Application
    Doing so will ensure that ALL resources (maps, schemas, orchestrations, send ports, receive locations, rules, etc.) deployed
    for "Other Application" are available/reprehensible in "Current Application".
    2)  Create a common BizTalk application on BizTalk Admin Console and add your custom pipeline assembly in that new application
    as a resource. With this, you don't need any other application to be started apart from this common application. Any other application who wants to use this pipeline will refer this common application.
    Rachit
    Please mark as answer or vote as helpful if my reply does

  • InfoSet with more than one cube

    Has anyone created an infoset with more than one cube?
    Are there any hints for to pay attention?
    Regards
    Chäsitzer

    HI ,
    Some important points :
    it is not possible to define an InfoCube as a right operand of a left outer join.
    SAP no longer supports more than two InfoCubes in one InfoSet.
    Therefore, if you include more than two InfoCubes in one InfoSet, the system issues a warning.
    the key figure values of InfoCubes and DataStore objects are duplicated when you join them to
    InfoProviders (see SAP Note 592785)
    Regards,
    Sathya

  • How can i use my iphone with more than one itunes

    how can i use my iphone with more than one itunes

    Sync iPod/iPad/iPhone with two computers
    Although it isn't possible to sync an Apple device with two different libraries it is possible to sync with the same logical library from multiple computers. Each library has an internal ID and when iTunes connects to your iPod/iPad/iPhone it compares the local ID with the one the device normally syncs with. If they are the same you can go ahead and sync...
    I have my library cloned to a small 1Tb USB drive which I can take between home & work. At either location I use SyncToy 2.1 to update the local copy with the external drive. Mac users should be able to find similar tools. I can open either of the local libraries or the one on the external drive and update the media content of my iPhone. The slight exception is Photos which normally connects to a specific folder on a specific machine, although that can easily be remapped to the current library if you create a "Photos" folder inside the iTunes Media folder so that syncing the iTunes folders keeps this up to date as well. I periodically sweep my library for new files & orphans with iTunes Folder Watch just in case I make changes at one location but then overwrite the library with a newer copy from the other. Again Mac users should be able to find similar tools.
    As long as your media is organised within an iTunes Music or Tunes Media folder, in turn held inside the main iTunes folder that has your library files (whether or not you let iTunes keep the media folder organised) each library can access items at the same relative path from the library folder so the library can be at different drives/paths on different machines. This solution ensures I always have adequate backups of my library and I can update my devices whenever I can connect to the same build of iTunes.
    When working with an iPhone earlier builds of iTunes would remove any file not physically present in the local library, even if there was an entry for it, making manual management practically redundant on the iPhone. This behaviour has been changed but it will still only permit manual management with a library that has the correct internal ID. If you don't want to sync your library between machines on a regular basis just copy the iTunes Library.itl file from the current "home" machine to any other you want to use, then clean out the library entries and import the local content you have on that box.
    tt2

  • Is there a stereo bluetooth headset that can pair with more than one device at a time?

    Is there a stereo bluetooth headset that can pair, i.e. multipoint, with more than one device at a time?
    Are the MacBook and iPhone 4 capable of multipoint bluetooth technoloagy?
    The goal is for my wife to be able to watch her Korean TV soap operas on her MacBook and still receive a call on her iPhone 4 via a stereo bluetooth headset.
    I was looking at the Motorola S10-HD but after further review saw that it only pairs with one device at a time.
    Appreciate any and all input. My Googling has returned no results.
    Rick

    TeslasBB wrote:
    pairing my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync thats in my car simultaneously? if i pair with the car, will i have to pair my jawbone all over again?
    You can only pair one device at a time to your 8330, or any other phone for that matter.  The "pairings" are saved to the phone, you can use one or the other and you won't have to pair it again.  Once you turn your bluetooth device on and the phone is on, they will find each other again.
    Hope this helps,
    John
    Stevie Ray! 1954-1990
    ** Don't forget to resolve your post with the accepted solution.

  • Can I use a magic trackpad with more than one Mac at a time?

    I am attempting to pair a MTP with a second MacBook Pro.  So far I can't get system preferences to find the MTP.
    I am wondering whether the MTP can be paired with only one Mac at a time, and that this is why my MBP won't find it.
    The reason I am thinking this is because the little booklet that comes with the MTP says 'after you pair your MTP with a Mac, you can pair it again with a different Mac.  To do this, you first remove the existing pairing and then pair the trackpad again'.
    Can anyone advise, please?
    If it can be paired with more than one MBP at a time, any suggestions why my system preferences search for the MTP is not producing any results?
    Thanks

    Yes, your keyboard, mouse or trackpad can be paired with multiple Macs.  You can even have multiple keyboards, mice or trackpads paired with one Mac.  The caveat is that the device can only be connected to one Mac at a time.  The device can't be paired or connected with a Mac while it's currently connected to another.
    Pairing a device with 2 Macs will be troublesome if the Macs are located within 33 ft of each other.  The device will connect with the first available paired Mac and then unavailable to the second.   If the Macs are located outside the 10meter range, it's quite easy to power off the keyboard (forcing a disconnect) then walking the keyboard to Mac 2 and powering the keyboard on.   I do this with a keyboard from my iMac to a Mac Mini in another room.
    Captfred

  • Error while running spatial queries on a table with more than one geometry.

    Hello,
    I'm using GeoServer with Oracle Spatial database, and this is a second time I run into some problems because we use tables with more than one geometry.
    When GeoServer renders objects with more than one geometry on the map, it creates a query where it asks for objects which one of the two geometries interacts with the query window. This type of query always fails with "End of TNS data channel" error.
    We are running Oracle Standard 11.1.0.7.0.
    Here is a small script to demonstrate the error. Could anyone confirm that they also have this type of error? Or suggest a fix?
    What this script does:
    1. Create table object1 with two geometry columns, geom1, geom2.
    2. Create metadata (projected coordinate system).
    3. Insert a row.
    4. Create spacial indices on both columns.
    5. Run a SDO_RELATE query on one column. Everything is fine.
    6. Run a SDO_RELATE query on both columns. ERROR: "End of TNS data channel"
    7. Clean.
    CREATE TABLE object1
    id NUMBER PRIMARY KEY,
    geom1 SDO_GEOMETRY,
    geom2 SDO_GEOMETRY
    INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
    VALUES
    'OBJECT1',
    'GEOM1',
    2180,
    SDO_DIM_ARRAY
    SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
    SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
    INSERT INTO user_sdo_geom_metadata (table_name, column_name, srid, diminfo)
    VALUES
    'OBJECT1',
    'GEOM2',
    2180,
    SDO_DIM_ARRAY
    SDO_DIM_ELEMENT('X', 400000, 700000, 0.05),
    SDO_DIM_ELEMENT('Y', 300000, 600000, 0.05)
    INSERT INTO object1 VALUES(1, SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(550000, 450000, NULL), NULL, NULL));
    CREATE INDEX object1_geom1_sidx ON object1(geom1) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
    CREATE INDEX object1_geom2_sidx ON object1(geom2) INDEXTYPE IS MDSYS.SPATIAL_INDEX;
    SELECT *
    FROM object1
    WHERE
    SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
    SELECT *
    FROM object1
    WHERE
    SDO_RELATE("GEOM1", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE' OR
    SDO_RELATE("GEOM2", SDO_GEOMETRY(2001, 2180, SDO_POINT_TYPE(500000, 400000, NULL), NULL, NULL), 'MASK=ANYINTERACT') = 'TRUE';
    DELETE FROM user_sdo_geom_metadata WHERE table_name = 'OBJECT1';
    DROP INDEX object1_geom1_sidx;
    DROP INDEX object1_geom2_sidx;
    DROP TABLE object1;
    Thanks for help.

    This error appears in GeoServer and SQLPLUS.
    I have set up a completly new database installation to test this error and everything works fine. I tried it again on the previous database but I still get the same error. I also tried to restart the database, but with no luck, the error is still there. I geuss something is wrong with the database installation.
    Anyone knows what could cause an error like this "End of TNS data channel"?

  • Send email from SAP with more than one attachment

    Hi all,
    How can i send email with more than one attachment and different types of document(doc,pdf,etc.) from SAP to external?
    Besr regards,
    Munur

    Hi,
    I use :
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
    the main problem with different attachemts is to genereate the packing_list.
    the packing list is a kind of description of the data table... where ist the start  of an image, end, size...
    "Creation of the entry for the compressed attachment
            objpack-transf_bin = 'X'.                    " it could be an image
            objpack-head_num = lv_head_num_count .  " inital 1 each att  add 1
            objpack-head_start = 1.                     " fix
            objpack-body_start = gv_startnum.    " table with attachments  1. line one
            objpack-body_num = tab_lines.          " how many lines are in the table of attachment
            objpack-doc_size = tab_lines * 255.   " size of the  attachment...
           objpack-doc_type = lv_typ . " 'JPG'.
            objpack-obj_name = 'ATTACHMENT'.
            objpack-obj_descr = lv_stripped_name  " name of the JPG
       APPEND objpack.
       APPEND LINES OF lt_goscontent TO gt_maildata.  " data Table...
    bestreg
    robert

  • By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and is it possible to install it on both Windows and Apple(if it comes with two licenses)? Thank you.

    By subscribing to Creative Cloud(Photoshop and Lightroom), does it come with more than one license, and if it does, is it possible to install on both Windows and Apple's OX? Thanks.

    A Cloud subscription provides for installing working installations on two machines.  You can have mixed operating systems (both Windows and Apple's OX).

  • Can you sign in with more than one apple id on an iPad?

    Can you sign in with more than one apple id on an iPad?

    Only one account can be signed in at a time (via Settings > Store), and if you turn on automatic downloads and/or download past purchases from an account then you risk tying the iPad to that account for 90 days : http://support.apple.com/kb/HT4627

  • Why is all my icloud account linked with more than one apple id?

    why is my iphone 5 merged with more than one account?

    What do you mean by "merged with more than one account" and "linked with more than one Apple ID"?  What exactly are you seeing on your phone?

  • HT1040 Is there a way to place an order with more than one item at a time? For example I am going to make a few books and have them all shipped to me.  Do I have to order and pay shipping for each one individually?

    Is there a way to place an order with more than one item at a time?  for example I am making a few books and having them all shipped to me.  Do I have to order each one separately and pay shipping each time?

    You have to order each book separately, if the books are different. Only multiple copies of the same book can be ordered in the same order, see here
    Regards
    Léonie

Maybe you are looking for

  • JMS sender communication channel content conversion

    Hi, I struck with the content conversion in the JMS Sender communication channel. I have configured the communication channel with the filed fixed lengths. (Simple type) The field fixed lengths i have given are 10,2,3,11 The contents in the file 1000

  • Apple TV dropping sound

    Hi all, There seem to be lots of variations of this question around at the moment, but I'll start afresh. My Apple TV2 is connected wirelessly to a Belkin router. The ATV is connected to the TV via HDMI and to a standalone (ie: not blu-ray/DVD player

  • Building installer with 8.5

    I have built an application with Labview 8.5 and am trying to build an installer with the 8.5 runtime engine for a stand alone program.  However the exe builds okay, but when I try to build the installer I get a message saying some components need to

  • Validation in Form Data add Event

    Dear All, I am developing an add-on m facing some problems in the Form_Data_ADD Event. I have created a form using screen painter and i have done some validations for few fields those fields are mandatory. after entering some data iam closing the for

  • Build and compile

    I have a problem about I don't know how to build and view the result in browser by using myEclipse software or any development tool let me talk about my project architacture: my project has a front end and back end(two project), both will have itself