Import error = pretty odd !

Hope someone out there can help me on this one. I have searched & trawled the net for a solution but have come up empty handed.
I have taken some video clips with my camera, it seems if the video function is left running until the memory card (1GB) is full, the clips will not play back on the laptop (PowerBook G4, OS 10.4.6) after import.
Quicktime (7.1.3) will not play them at all, I have tried VLC as well as Final Cut Pro.
My previous version of QuickTime gave an error message "2048", the new version of quicktime gives the error message "error opening movie" - "the movie could not be opened"
However, any of the videos can be played back on the LCD screen on the camera.
The files are typically 300 to 500MB in size.
When they are imported, they are imported as .mov files.
If I take a video clip and stop filming as one normally would, there is no problem with the imported file.
It seems if filming continues until the card is full ,and as a result the camera terminates the filming, the problem arises.
I suspect because of this "unexpected" end to the filming, the video file is perhaps not closed off or saved properly as a result of a lack of remaining space on the memory card.
Does anyone know of any way these files can be salvaged / repaired.
I have tried QuickTime, VLC, Final Cut Pro, iMovie, Visual Hub, Footlights, Diva, MPEG2 Works.

I have taken some video clips with my camera, it seems if the video function is left running until the memory card (1GB) is full, the clips will not play back on the laptop (PowerBook G4, OS 10.4.6) after import.You may need to re-read the instruction manual on how to take these clips. As you surmised, QT will not normally open a file that is improperly closed as it does not normally use an "open ended" file structure.
Does anyone know of any way these files can be salvaged / repaired.I'm not going to say it is impossible, but it would likely require use of a hex editor and more understading of the file structure than I possess. Basically, your would probably have to manually create a proper termination and modify the appropriate pointers/file headers.

Similar Messages

"Template import error: No VM configure file found" on brand new setup

Previously, I posted Console does not launch OVM 3.1.1, Win7x32 Firefox15/IE8 - Empty .jnlp file which was about VM Console not launching. Since this is a new installation, and it seemed to be a unique problem, I scratched the whole installation and started again from scratch. Everything, including the NFS file server, was re-installed from scratch CD OS installation.
The process is pretty straightforward once you're used to it, and in less than three hours I was ready again to import my first template (a template I had imported before). But now, I submit the the request, and almost immediately the process aborts. (You can see in the information below, that 1 second passes between the Import request (06:32:36) and the failure.)
Thing is, it takes about three minutes, even locally on the web server, to get an index of that large file (tar tzf), and at completion, the vm config file is listed.
Am I misreading the error? My web searches for enlightenment found only one good hit on this error, and in that case it appeared to be an "out of space" issue. In this case, though, I'm importing a 5GB tarfile into a 390GB, otherwise-empty file system, so I don't think that is the issue. The failure in ovs-agent.log is below. What other information may I provide to get to the bottom of this? (Thanks for any guidance/help, of course!)
[2012-10-31 06:31:40 3341] DEBUG (monitor:36) Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3341] INFO (notification:67) Notification sent: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:40 3338] INFO (notification:193) Sending notification: {CLUSTER} {MONITOR} Cluster state changed from [Heartbeating] to [DLM_Ready]
[2012-10-31 06:31:48 4914] DEBUG (service:77) discover_cluster: ()
[2012-10-31 06:31:48 4914] DEBUG (service:85) discover_cluster: call completed.
[2012-10-31 06:32:03 4926] DEBUG (service:77) storage_plugin_mount: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, {'status': '', 'uuid': 'fc3564eb-ce8b-489c-96bc-df6de2cc8a11', 'ss_uuid': '0004fb00000900003cf41964f3476788', 'size': '330279518208', 'free_sz': '330075340800', 'state': 2, 'access_grp_names': [], 'access_path': 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', 'name': 'nfs:/mnt/ps_big/repo/repo'}, '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55', None, True, [])
[2012-10-31 06:32:03 4926] INFO (storageplugin:108) storage_plugin_mount(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:03 4926] DEBUG (NFSPlugin:353) cmd = ['mount', '-t', 'nfs', 'filesrv.ps.***.com:/mnt/ps_big/repo/repo', '/OVS/Repositories/0004fb0000030000659e0ce6f2ecfb55']
[2012-10-31 06:32:03 4926] DEBUG (service:85) storage_plugin_mount: call completed.
[2012-10-31 06:32:03 4931] DEBUG (service:77) add_repository: ('filesrv.ps.***.com:/mnt/ps_big/repo/repo', '0004fb0000030000659e0ce6f2ecfb55')
[2012-10-31 06:32:03 4931] DEBUG (service:85) add_repository: call completed.
[2012-10-31 06:32:36 4972] DEBUG (linux:847) async call function: import_template
[2012-10-31 06:32:36 4975] DEBUG (service:77) import_template: ('0004fb0000030000659e0ce6f2ecfb55', '0004fb0000140000fdc18a572a244015', ['http://aspire/pstop/OVM_EL5U7_X86_64_TOOLS8_52_06_PVM.tgz'])
[2012-10-31 06:32:37 4975] INFO (notification:74) async_proc_prog: notification {ASYNC_PROC} progress PID 4975 status {'OBJECT': 'template', 'TOTAL_OBJECT_COUNT': 1, 'CURRENT_OBJECT_COUNT': 1, 'TOTAL_BYTES': 0L, 'CURRENT_BYTES': 613L, 'OPERATION': 'download'}
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} progress PID 4975
[2012-10-31 06:32:37 4975] ERROR (service:96) catch_error: Template import error: No VM configure file found.
Traceback (most recent call last):
File "/usr/lib64/python2.4/site-packages/agent/service.py", line 94, in wrapper
return func(*args)
File "/usr/lib64/python2.4/site-packages/agent/hypervisor/xenxm.py", line 1041, in import_template
raise RuntimeError('Template import error: %s' % err)
RuntimeError: Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] DEBUG (linux:879) ovs_async_proc: pid 4975 status 1 output Template import error: No VM configure file found.
[2012-10-31 06:32:37 4975] INFO (notification:67) Notification sent: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:37 3338] INFO (notification:193) Sending notification: {ASYNC_PROC} exit PID 4975
[2012-10-31 06:32:39 4987] DEBUG (service:77) storage_plugin_listFileSystems: ('oracle.generic.NFSPlugin.GenericNFSPlugin', {'status': '', 'admin_user': None, 'admin_host': None, 'uuid': '0004fb00000900003cf41964f3476788', 'total_sz': 0, 'admin_passwd': '******', 'storage_desc': '', 'free_sz': 0, 'access_host': 'filesrv.ps.***.com', 'storage_type': 'FileSys', 'alloc_sz': 0, 'access_grps': [], 'used_sz': 0, 'name': '0004fb00000900003cf41964f3476788'}, True)
[2012-10-31 06:32:39 4987] INFO (storageplugin:108) storage_plugin_listFileSystems(oracle.generic.NFSPlugin.GenericNFSPlugin)
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:142) ENTER: listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (NFSPlugin:257) EXIT : listFileSysytems()
[2012-10-31 06:32:39 4987] DEBUG (service:85) storage_plugin_listFileSystems: call completed.
[2012-10-31 06:32:39 5005] DEBUG (service:77) discover_pool_filesystem: ()
[2012-10-31 06:32:39 5005] DEBUG (service:85) discover_pool_filesystem: call completed.

How did you get the template to where you staged it?
I'd say the template is corrupt or you only have a partial template.
I did notice the call to the template is based on the short name of the host. Can you confirm the VM manager can access the http path via short name?

PST Capture 2.0 - Import Errors - Unable to translate Unicode character

Currently using the Office 365 service. I have installed both the PST Capture Console as well as the 64-bit Agent on to a Windows 7 64-bit laptop which has Office 2013 64-Bit installed.
Scenario: A misconfigured retention policy in Office 365 accidentally deleted thousands of email messages from an employee's mailbox. We've obtained the .ost file and using a Third Party tool have converted the OST to a PST file. I am able to add the file
to my Outlook profile and see the recovered contents. Normally I would just copy the contents of the PST file back to the mailbox but it randomly errors out during the copy process forcing me to start over. The PST is roughly 8.5 GB.
I setup the PST Capture tool to try and migrate the PST contents back to the mailbox. I am able to locate the PST and import it to the mailbox in question but when the import has completed, it says "Complete with errors". Reviewing the Message
Alerts tab, it has 70,314 errors (pretty much every email). The error is difficult to understand but it is the same for each item:
"Unable to translate Unicode character \uDC47 at index 6 to specified code range"
Looking for any suggestions/advice on maybe what to look at.
Thank you all!

I went to Shared Components -> Static Files -> Create
I have split my exported application file, creating various size files for testing, ranging from 380 Kb to 1638 Kb (halves, quarters, eighths). Sometimes I can upload; sometimes I can't. Typically I can upload several. But once I get the error, it's fairly consistent in failing but not 100%. At least once, I've uploaded all four quarters of the file plus an additional half of the original (4 eighths, all different). But I can't find the pattern of failure. The most consistency I see is once it starts failing, I can almost always get it to be successful again if I click around APEX and come back to uploading.
I've tried to upload one half of the file. That failed except for the first few times I tried to do it. It always failed when I tried to upload a second half of the file. That's why I continued dividing the file into smaller pieces. I thought maybe there was something inherent in the file causing the problem. But since I have subsequently load all four quarters, I guess that can't be it.
I've also deleted files at various times throughout. Sometimes I can upload and sometimes I can't after that. And again, often I can get back into "Success" mode by clicking around the interface and then returning to upload files.
Thank you,
-J
Edited by: jsorense1 on Sep 16, 2008 10:06 AM
Edited by: jsorense1 on Sep 16, 2008 11:45 AM

FDMEE Import error "No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'

Hi,
We are having trouble while importing one ledger 'GERMANY EUR GGAAP'. It works for Dec 2014 but while trying to import data for 2015 it gives an error.
Import error shows " RuntimeError: No periods were identified for loading data into table 'AIF_EBS_GL_BALANCES_STG'."
I tried all Knowledge docs from Oracle support but no luck. Please help us resolving this issue as its occurring in our Production system.
I also checked all period settings under Data Management> Setup> Integration Setup > Global Mapping and Source Mapping and they all look correct.
Also its only happening to one ledger rest all ledgers are working fine without any issues.
Thanks

Hi,
there are some Support documents related to this issue.
I would suggest you have a look to them.
Regards

How do I convert an excel (2008) document to Numbers? When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid"

How can I convert an Excel (2008) document to Numbers. When I drag the Excel document onto the Numbers icon I get, "Import error. The file format is invalid.

That extension identifies the most current Excel file format, a format that can be opened by Numbers '09 (and by Numbers '08).
A check with Numbers '09 shows it capable of opening .xlsx files when right-clicked (and Numbers chose as the application to open, when double-clicked (if Numbers has been set as the default application to open this type of file, or when dragged to the Numbers icon in the dock.
I see two possibilities for Numbers inability to open it and the message you receive:
1. The file is not actually an Excel file, and the sender has added the .xlsx extension to the filename manually.
2. The file is an Excel file, but has somehow been corrupted.
Have you tried opening the file with a different application? The open source Office suites, OpenOffice.org, LibreOffice and NeoOffice can also open .xlsx files. If they're unable to open this one, that would point toward the file itself being faulty. You can download these applications from their rspective websites, linked in the names above. All request a donation to support future development, but only Neo requires one to have been made recently, and that only for the current release (which won't be necessary to open .xlsx files).
Regards,
Barry

File Import Error - Adobe Media Encoder, help!

I'm at a complete loss. AME worked very well for me for a long time and booting it up yesterday gave me a paralyzing error.
Upon trying to import an MOV, MP4, and later a WMV, I received the following error:
File Import Error
The file C:\Users\tj\Desktop\New folder\SH_GS_PeekPlay_DEMO_720.mp4 could not be imported. Could not open source file. Please check that file exists with correct permissions.
I've tried everything I can think of:
1. Moved the file off the server and onto my desktop.
2. Double checked file permissions (all of which I have)
3. Uninstalled AE and Premiere to try to get rid of Media Encoder.
4. Searched for a way to uninstall AME so I could put a fresh install (can't find how to do this)
5. Manually updated AME
6. Reboot (multiple times between these steps)
7. Contact customer support - no help thus far.
I'm running Windows 7 64bit with Adobe CC and AME 7.0.1.58

Tried that as well.
To rule everything out, I had the files placed:
1. On company internal server
2. External Harddrive connected through Firewire
3. Internal Hard Drive (with OS)
4. Internal secondary Hard Drive (data only)
5. On Desktop (technically 1st internal drive)
I have since fixed this by uninstalling every single Adobe application (including Flash and Air) and redownloading and installing each.

Getting import error in jsp in creating war project of masthead for portal 7.31

Hi,
I am getting error in customize masthead war project in jsp for import statement.
<%@ page import="com.sapportals.htmlb.*"%>
<%@ page import="com.sapportals.htmlb.hovermenu.*"%>
<%@ page import="com.sap.security.api.UMFactory"%>
<%@ page import="com.sapportals.portal.prt.service.license.ILicenseService"%>
<%@ taglib uri="prt:taglib:tlhtmlb" prefix="hbj"%>
I have asked basis team for jar relative to these but they have not found in system.
We are using portal 7.31 version.
Kindly help me to remove this error from jsp.
Thanks in advance.

Hi Hemendra,
At first i have done this and after that even i was facing error that's why i created this thread.
Kindly check my first post for error.
Getting import error in jsp in creating war project of masthead for portal 7.31
This question is Not Answered.(Mark as assumed answered)
Swati Joshi Apr 29, 2015 12:34 PM
Hi,
I am getting error in customize masthead war project in jsp for import statement.
<%@ page import="com.sapportals.htmlb.*"%>
<%@ page import="com.sapportals.htmlb.hovermenu.*"%>
<%@ page import="com.sap.security.api.UMFactory"%>
<%@ page import="com.sapportals.portal.prt.service.license.ILicenseService"%>
<%@ taglib uri="prt:taglib:tlhtmlb" prefix="hbj"%>
I have asked basis team for jar relative to these but they have not found in system.
We are using portal 7.31 version.
Kindly help me to remove this error from jsp.
Thanks in advance.

Error faced during installation of EHP3 on ECC 6.0 (Test Import Error) ?

Hi
i am facing an error while installing EHP3 on ECC 6.0
my current level :
SAP_ABA 700 0017
SAP_BASIS 700 0017
SAP_BW 700 0019
SAP_AP 700 0013
all other SAP_APPL , ERECRUIT are on 600 level more then 11
I downloaded the ENH3 FOR ERP6.0 content from market place
I loaded them with SAINT and continued , i removed all other warnings of support package in SAINT by taking appropriate support packages .
Problem: I am getting Test Import errors
1)For EAAPL(60301) ---> error code 08
Function API_RE_CD_GET_CASHFLOW_CN (RECD_API_CONDITION 01) does not fit into the existing function group ((RECD_BAPI_CONDITION 21
2)FOR FI-CA(60301) --->error code 08
Function FKK_DB_LOCK_SINGLE (FKKLOCK_DB 04) does not fit into the existing function group ((FKLOCK 11
3)For ISM (60301) -
> error code 08
Function ISM_SD_RETURN_RELEASE (JKSDRETURN03 01) does not fit into the existing function group ((JKSDRETURN100 01

Hi
Yes i have checked the previous SPS levels of these components its 13 and i used 603 SP level 02 of these components for installation as per told by you while defining a installation queue as well as support package selection in SAINT but still am getting the error. In SAINT i even got in remarks filed a message that "extended queue is consistent and matchesthe selected target packages". I am getting "TEST IMPORT ERROR ...."
I am getting return code 08 for components listed below in TEST IMPORT phase :-
1) EA-APL (603 SP level 01)
2) FI-CA (603 SP level 01)
3) ISM (603 SP level 01)
4) EA-DFPS (603 SP level 01 & 02)
Please help me out and suggest something.

Word to Pages "Import Error"

I have a load of files created by drag and drop editing of pdf files into Word tables. I want to use pages to edit these ... it should be easier with services. Most of the files open fine, but a few give me an Import Error. Any ideas? There are no obbvious differences between the accepted files and the rejected files. I mightjust gie up with Pages, leaving it for the Mrs to play with ... Keynote seems nice though!
(Sorry is this has been asked and sorted, but search is off-line and I couldn't find it in the messages when I browsed)

Julian,
Pages simply won't support a table with that many rows. If you need that many, you must use another application.
Perhaps the originator could use a tabbed list rather than a table. That's the only way you will be able to contain a list that long in Pages. You can do the conversion yourself if you open the Word document in LibreOffice, Copy the Table, Paste the Table into Numbers, Export the Numbers doc to CSV, and import to Pages. In Pages Find and Replace the Commas with Tabs.
There are probably other ways, but that's what comes to mind here.
Jerry

Excel Import Error

I am getting this message:
Import error
This document was created with an unsupported version of Excel. Only documents created with Excel '97 or later can be opened.
I have searched and haven't found a solution.
This file was created in Open Office and has been edited in Excel 08(mac). Clearly not an old version of Excel. I have opened it in Open Office and re-saved, but Numbers still won't open it.
Weird.
Kirk

Found the answer. Both Excel and Open Office were saving the file back to version 5.0.
After forcing a resave and specifying a newer file type, it opened in Numbers.

Why do I get "Import Errors"?

I just shot 16 clips with my Canon HD camcorder (AVCHD). I put the memory card in my desktop computer (Windows7) after I had PrE11 running. Then I clicked Video Editor/New Project/Videos from Flip cameras, AVCHD cameras.
I saw all my clips and I clicked on some in the Preview window. They played OK. But when I clicked on Get Media I got this message: Import Errors/ Error Message/File already exits at C:\Users\Tommy\Videos\
What's happening? I didn't change the Presets: File Name, and Name:Untitled.
Can someone tell me what to do to get my new clips into the Timeline.
By the way, the clips I just took were the only ones on the memory card.

Tommyvincent
This is my take on your situation based on what I understood from your description:
However you did it (maybe hitting some buttons more than once or other) your videos got imported and saved to C:\Users\Tommy\Videos\. Did you look to see if they were there? If not, please take a look in that area to confirm or refute.
If they are in my video already as I suspect, then you have at least two choices
a. Import them into Premiere Elements 11 with the program's Add Media to get them into Project Assets (correct project preset)
or
b. delete them from C:\Users\Tommy\Videos\ and then repeat the import using Add Media/ and the Video Importer route that you wanted to use.
Please review and let us know the outcome.
Thanks.
ATR

Import error with MPEG-2 files: Brorsoft Video Converter to Apple Prores.

Hi,
The Brorsoft Video Converter software gives me an 'import error' message when I attempt to import files from a folder on my desktop. That folder contains many mpg files (MPEG-2 Video, AC3). Those files in the folder on my desktop came from a Sony video camera.
I need to convert those mpg files to Apple Prores 422 HQ so I can then edit them in Apple Final Cut Pro X.
But when I go to import those mpg files into the Brorsoft Video Converter software, it comes up with a message saying: 'import error', indicating that the Brorsoft Video Converter software does not understand the type of file.
I am on Mac OS X Version 10.6.8.
I've emailed Brorsoft support but I don't think English is their first language – they've emailed back to me asking for clarification of the problem. And I need the problem fixed as I have to edit this video for someone that has many waiting customers.
Could something have changed in the files when I copied them from the video camera to the desktop?
Thanks in advance.
Cheers,
Paul

Hi Tom,
Thanks for your prompt reply. I was using a friend's video camera – I've just texted him for the exact model of Sony video camera. I didn't yet have the Brorsoft Video Converter software when I had to give the video camera back to my friend. So, I copied the files off the video camera to my desktop.
It records onto an internal hard drive. And yes you're right, I don't need to go HQ. I also tried plain Apple Pro Res. That didn't work either. It comes up with 'Import error' message, so it seems like it just doesn't understand the file type.
When I go 'Get Info' on one of the files off the camera, it tells me it is an 'MPEG-2 video, AC3' file.
I'll try and get MPEG Streamclip like you suggested and see if that works.
Thanks again.
Cheers,
Paul

Import error moving from iPad to iPhoto

Somewhat puzzled by the inability to import photos from my iPad to iPhoto.
Here's what happened:
1. Used camera connector to transfer high-def JPG format files from a Nikon D50 onto the iPad (no problem, and the *iPad displays the pictures* perfectly).
2. Attach iPad to Mac and start iPhoto.
3. iPad is shown as attached and import window is displayed, correctly showing 176 photos to be imported but *no images are displayed*, only the dotted outline boxes.
4. Attempt 'Import All...' and an *import error is shown listing all 176 JPG files* as not imported.
5. Start Image Capture utility and attempt 'Import All', same error is reported.
6. Attempt selecting just one photo and importing just selected item (fails in both iPhoto and Image Capture with the same import error).
It looks like the iPad can read the JPG files but for some reason the Mac cannot.
Setup details:
iPhoto '08 v7.1.5
Macbook Pro running OS X 10.6.2
iPad running iOS v3.2
Image Capture v6.0.1
Any ideas?
Regards,
Mark

Updated to OS X 10.6.4 and everything seems to work correctly.
Message was edited by: mbools

Import error as error number is -12018

Hi All,
While importing a project getting an error as:
Import Error: com.fatwire.cs.core.realtime.DataException: com.fatwire.assetapi.common.AssetAccessException: Error met whiling saving assets [AttrTypes:1415189814137] and the error number is -12018
https://docs.oracle.com/cd/E29542_01/apirefs.1111/e39371/MISC/errno.html shows error related to Missing publication. No clue..

-12018 means " Missing publication."
Since the DemoSite is a new site that doesn't exist in the CSDT target environment, I would import the site first, e.g.
java com.fatwire.csdt.client.main.CSDT http://hostOrIP:8080/cs/ContentServer username=fwadmin password=xceladmin resources=@SITE:DemoSite cmd=import
NOTE: Make sure the site was exported to your datastore before import.
Then, import assets of this site:
java com.fatwire.csdt.client.main.CSDT http://hostOrIP:8080/cs/ContentServer username=fwadmin password=xceladmin resources=@ALL_ASSETS:*;@ALL_NONASSETS:* fromSites=DemoSite cmd=import
Note that the parameter is fromSites, not fromSite.
See if this helps.
Thanks,
Yu-Chun

Import Error on iTunes Producer

I have already uploaded succesfully two books on the iBooks platform, using iTunes Producer. However, I am having trouble uploading other titles. After my files pass all validation tools (Apple, Epubcheck and Flightcrew), my book is delivered. Then, by opening the Package History menu, I see an Import Error, with no apparent explanation, or error log I can send to apple. I have already checked for the obvious usual suspects (encoding, manifest, namespaces etc) but I cannot find something wrong. In addition, I have already used the Contact Us form in the iTunes Connect module, but there is no answer from Apple.
Anyone with a similar problem, or a possible solution ?
Best,
Nikos

Same error here.
First book being uploaded. Book was created using Sigil, assembled with Calibre, and tested with epubcheck and FlightCrew. After iTunes Producer delivers the file, in a few minutes I retrieve the package status and the message is "import error".
I would imagine that a text file with the reason for the import error would not be that difficult to produce. If it is failing, it probably is reaching a condition that is not allowed during import (a condition would be an IF-THEN-ELSE or a CASE statement). At that point the import process should log what happened and send to us so we could correct it.
In the mean time I entered a request on the Contact Us page and I will post here any replies I receive.

Import error = pretty odd !

Similar Messages

Maybe you are looking for