Import/Export ZendAMF project

Hi, I'm wondering if I'm missing something when exporting my Flashbuilder project (Php w/Zend). Is there any way to get the services to show up in Flashbuilder after import? It seems the 'link' files in the Flex portion of the projects are internal somwhere.
If I start a new project -- and import all the flex/php code -- The project won't even run. If I manually recreated one service, the project will run all the services -- but it doesn't show up to flashbuilder.
Thanks for any suggestions.

I just copied a project directory to a new location and did an import of the project path. Everything worked just fine.
How are you importing your project? Make sure the project directory has all the necessary config files in place before importing.

Similar Messages

How do import/export studio project to myeclipse?

Hello guys,
Is there a way to do this???
Thanks!

Hi,
Take a look at the below link
http://blogs.sun.com/roller/page/markdey/20060130
MJ

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. what is the easiest way to do this? i have tried export and import but it didn't seem to work.

I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.

What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN

Import/export issue to migrate the project

Hi,
I am trying to migrate a project from 1 server to another server.
I exported the project and model from my current server, and imported them to the new server. the thing is, the senario can be run successfully, but when I open the interface in designer, the source table cannot get any definition, all the columns in the source table won't show up. it looks like to me is that the interface lost the connection of the data store in the model.
Anybody has any idea how to fix it?
Thx

Hi
If its a fresh imploementation then its fine.
Say yu migrated the ODI objects to prod and you face an issue.
you have fixed it in development and want to move it to prod.
How do you handle this scenario.
Please let us know the process that you are following

Export and re-import in to project keeping background transparent.

Hi guys...
I have had some joy and some no so joy... maybe I am doing something wrong..
I have been using a smoke emmitter and "flattened" this and re-imported back into project to save ram or to duplicate the layer (for more smoke) and also again save ram. But sometimes the new import has a transparent background layer sometimes it is black. (Always I set all the other layers to not viewable) I have tried using keying to get rid of the black. But possibly there is a setting to keep any export/import back into project background transparent, if in a group above the bottom one. I am using QT animation setting for exports. DVC PRO HD 1080p
Thanks.
Cheers for all this great help... invaluable for neubie..

Set your background to transparent (press apple+J to open the window you need) as it may currently be set to "solid" and render the movie out using Animation, as this preset will support transparency. That should do it.

HT5537 How do you import/export garage band projects using the latest version of iTunes when there is no apps in the left column to select garageband?

I am perfectly aware of how to do this using the old version of itunes.
however i just got a new macbook pro retina... and it came with the latest version of itunes.
and i was trying to import/export garage band files between my ipad and mac via itunes.
and the option for apps, that is usually on the left side where you can then select garage band from in itunes, isnt there in the new version of itunes.
has anyone got a work around for this?
thanks.
nic

Nic, for me the iTunes window looks like this, when I connect my iPad 3:
I select the iPad in the "devices" section of the Sidebar (use: "View > Show Sidebar" if the sidebar is hidden).
Click the "Apps" tab in the "Devices" pane.
Scroll all the way down in the Devices pane to "File Sharing" "Apps" section.
Then do I click "GarageBand" to select the documents in the right panel.
Which part is different for you? Perhaps you could post a screenshot?
Regards
Léonie

How can I export a project on an external drive in the latest version of iMovie?

Before the latest release of iMovie I easily managed to export a project on an external usb drive and re-import such project on a different Mac... In the latest iMovie version, however, I cannot see my drive any more..
So, how can I export a project on an external drive in the latest version of iMovie?
Thank you in advance

I'm not sure this is the best way, but you could create a new iMovie Library, move your project to that Library, then close the library. Then move the Library to your USB drive. Then, on the other Mac, in iMovie open the Library.

How do I import an Iphoto Project (book) directly into Aperture 2?

I have a book that I did as a project in iPhoto '08 that I would like to import directly into Aperture 2 and "redo" the book using Aperture's new features.
Although I imported my iPhoto library I don't seem to have this project in Aperture and when I look to export the project from iPhoto it wants to export it as a movie.
Since the photos from iPhoto are in Aperture I figured that importing the iPhoto project would be easy. I don't want to recreate the book again if I can help it - I just want to import and modify it in Aperture.
Is it possible to do and can anyone tell me how to do this?
Thanks,

You CAN completely customize the text in iPhoto books, including left/center/right justifications, and it is fairly easy. Here's the workaround:
1) In your iPhoto book (or calendar or whatever) layout, highlight the text you want to modify or change its alignment.
2) Launch TextEdit and open a blank document. Paste the text from iPhoto into the document.
3) Still in TextEdit, highlight your text. Using ordinary word processing methods, modify or realign your text as desired. When satisfied, highlight the customized text and copy it.
4) Back in iPhoto, paste the newly modified text you just copied from TextEdit into the desired text box, overwriting (or deleting first) the original text. All the modifications you made in TextEdit should apply.
This trick can work wonders for helping make an iPhoto book completely your design.
--bosskev

Unable to Export iMovie project in everyway I have attempted for the past 2 weeks. Please Help! Due date coming up!

I've unable to Export iMovie project in everyway I have attempted for the past 2 weeks.I have a late 2012 iMac with 8gb of RAM and 700 gb of free space on the hard drive. The video I am trying to export is 48 mins long with most of the source footage from a NIkon D3100 and several other cammcorders. I've been exporting with Apple Intermediate codec because that was the only one that has work so far but it only worked once and since then I have had to make changes to the project and now I'm unable to get it to work. For all Quicktime exports in H.264 or AIC (my prefered format for this export since I figured it'd offer the highest quality when I import it into Encore for making a dvd out of it) Which just stops exporting in the last few minutes without explination as to why or it crashes and quits. It either leaves a partial file or nothing at all. When I do "export movie" I get a "not enough memory Heap zone error"
I don't know what to do any help would be greatly appreciated!
By the way I happen to have Adobe CS6 Production Premium but didn't know how to use it as well when starting the project and now really regret not using it because it appears to be 10x more stable and capable of handling all the tasks I want it to do.

Hi
Error -108 memFullErr Ran out of memory [not enough room in heap zone]
Turn off - TimeMachine usually works - re-try.
(the Application down in the Dock - not the Device)
But this can mean many thing's - My first thought is
Free Space on Start-Up hard disk. How much ? (other disks do not count)
AppleMan1958
Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
After you have optimized your Event, you should be able to Share with no problem.
Lennart Thelander
-108 mean you are running out of (free) RAM.
Try restarting the computer just prior to sharing. That frees up RAM.
from mynameisearl
Final Entry
Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
The only work around I have found is to split the Original Project into two.
What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
Anyway - I hope all of the above at least proves useful for others.
Good Luck

Error while importing an existing project into workspace

hi,
I am trying to import an existing project into workspace but getting an error 'vfamilychange' doest not have a .project file .But while checking into the folder structure of project vfamilychange' shows the .project file is already there.
Please do suggest.

Hi,
To correctly use the project in a new NWDS. Please use the following method (for Windows XP only):
1.) Navigate to the projects folder. This will be in the "DC" or "Local Development" folders in your "Documents and Settings" folder.
2.) Inside the project folder you will find an "_comp" folder.
3.) Zip this entire folder with WinZIP or WinRAR.
4.) Finally goto the new PC / Location of export. Unzip this archive into a new Folder.
5.) Open NWDS. Goto File->Import->Existing Project into Workspace.
6.) Select your folder (where you extracted the archive).
Hope that helps.
Thanks.
p256960

Import/Export in back stage view

What is the use of import/Export in back stage view of customize ribbon and Quick access toolbar

Shiv --
Pardon me for bumping into this thread. Here is a scenario that might answer your question:
You create a customized ribbon and Quick Access Toolbar. Your ribbon has a new tab called Initiate which contains the commands you use to initiate a new project, such as setting the Start date of the project, setting the Project and Nonworking Time
calendars, etc. Your customized Quick Access Toolbar contains the buttons you most frequently use, such as Zoom In, Zoom, Out, Scroll to Task, etc.
A fellow PM sees how you have customized the ribbon and Quick Access Toolbar in your copy of Microsoft Project and asks if you would give him/her the customizations.
You navigate to the Backstage and export your ribbon and Quick Access Toolbar customizations to an *.exportedUI file and you e-mail the customization file to your fellow PM.
Your fellow PM launches Microsoft Project, navigates to the Backstage, walks through the import process, and imports the ribbon and Quick Access Toolbar customizations from the customization file you sent him/her.
As Guillaume correctly points out, this is how to transfer ribbon and Quick Access Toolbar customizations from one computer to another, or from one user to another. One of the things I have done since Microsoft released the 2010 version Microsoft Project
is to give my students a customization file that has customizations they can use in the real world with their ribbon and Quick Access Toolbar. The export/import process is very easy, and very useful. Hope this extra helps.
Dale A. Howard [MVP]

Problem with importing a Motion project into FCP if it uses a Boris filter

Had an odd and highly frustrating experience. Was using a Boris Continuum filter (the posterizing one) on the background of a Motion project (was using it to age a background of a brick wall to age it and give it a more 'nighttime' look).
When I imported the file into FCP to use as an intro there, the background disappeared entirely. After an hour of troubleshooting, finally figured out that it was the Boris filter that was causing the problem (it also was probably responsible for the random crashing of FCP I was experiencing), as when I disabled the filter and re-saved the project, it worked beautifully.
Is this a 'normal' problem when using Boris filters? Do I have to export every Motion project into a Quicktime file before importing it to FCP (and possibly DVDSP) if it uses a Boris filter?

Thanks! Now the frustrating thing is that the client doesn't want to use what I created after all...bah humbug
It's not the RAM (which is either 8GB or 16....not sure on that computer). Got an e-mail from Boris Support that implied that this will happen all the time...that you have to export all projects before you use them in FCP or DVDSP or the Continuum filters won't work (loved how the support person suggested that I just use the filter in FCP...which defeats the purpose of creating something in Motion! But I digress...) Told me I had to buy a $500 program called Automatic Duck to get things to import properly...and that Boris filters won't work with the latest upgrade of FCP, btw.

ODI - Import & Export issue

Hi
I am using ODI in two environments (Development & Test, both are in different servers).
In Development, i have Master repository with Internal ID = 0 & Work repository with Internal ID =1
In Test environment, i have Master repository with Internal ID = 0 & Work repository with Internal ID =1
I tried to Export the Project & Models from Development, it was successfully completed. I placed those files in Test environment path.
I have succesfully imported the Models in the ODI Test environment. But, when i tried to Import Project, i faced the below error
XML Import Error:
com.sunopsis.core.m: This import action has been cancelled because it could damage your repository (problem with the identifier sequences)
Can anyone help me what actions need to be taken to Import the Project without any issues in detail with the steps?
Thanks
Dhamu

Hi Dhamu,
Its a pure ID clash, since ur DEV and TEST repository ID are same, its should be different across environment , say DEV Master-0, Work-1 and TEST Master-2, Work-3 something like that.
You need to flush the TEST repositories and create a new repositories with UNIQUE IDs.
Have a look,
Migrate ODI project - import forbidden
Thanks,
Guru

NTSC assets cannot be imported into PAL projects.

Hi, i have exported .mov from FCP and when i try to import it into DVD Studio Pro i get the message,
NTSC assets cannot be imported into PAL projects, WHY, it is not an NTSC asset ?
HELP
Paul

Do not use H.264. Use Pro Res or send the timeline straight from Final Cut to Compressor an a PAL preset (or one that you make yourself.) I prefer sending out self-contained versions in case I need to re-rencode or want to make items for various formats.
Movie setting up Compressor *in case you need it) is [here|http://www.dvdstepbystep.com/compressor.mov] Make sure to use PAL and/or make sure you make your preset PAL

Audition Import / Export to/from other DAWs

Well its done!
AATranslator is finally finished.
http://www.aatranslator.com.au/ is where you will find it.
Its been 3 months in the making and as I mentioned previously its not donationware but it is a fully functional demo only limitation is the number of tracks and 'clips'.
Many thanks to John Lundsten from the UK for the idea of this project, for his tireless efforts testing the application and for his insight as well as the user guide. Thanks also to Adrian Connelly for additional programming efforts and the interface and also dstDean from this forum for additional testing and encouragement.
Those who have supported me in the past (as at the time of this post) through donating for any of my previous applications are entitled to $50usd off the price for every application they have donated to me in the past. For some that equals a free copy! Never let it be said that I don't appreciate your support!
This application is not for everyone but certainly for anyone who needs to move their projects from one DAW to another it is certainly worth a look.
It definitely the only application which currently allows you to import/export from Adobe Audition!
There are many other DAWS in our sights and significant work has already been completed interfacing to Reaper project files and OpenTL files. These will appear in a free upgrade in the not too distant future.
Enjoy.....

Welcome aboard!
There are a number of points to address here:-
"I presume there is no back up facility for your Adobe Audition® session file like Premier Pro has with Auto Save."
That is correct but even with applications with 'auto save' there is no substitute for regular backup of both your audio files, session file & audition settings.
"To fix this problem I was thinking about SESBackup (Donate) so this never happens again. Does the product work like the auto save facility in PRO (i.e. the session) or does it record & save everything i.e. the sound files again as well into a specific folder of your choice."
SESBackup only targets adobe session files (either singularly or ALL of your session files). It is handy to easily back them (or it) up before recommencing work on a project or as soon as you are finished for the day. It does not backup your audio material.
MediaSweeper will isolate and seperate the unused files from your project and move them to another location so that you only backup the material that is actually in your session.
AuditionFX will help you backup your Adobe Audition settings
"More importantly I need to combine these two sessions together and presume there is no facility for you to do this Adobe as well."
As I recall AA1.5 has the facility to 'append' other AA1.5 sessions.
"I have just read this thread and I am hoping AATranslator can achieve this. If translator does do this what is the best way to achieve a great result without losing any information."
As far as Audition is concerned AAtranslator was designed with AA3 in mind. AATranslator can append sessions either from Audition, Samplitude, Cubase, Nuendo, Reaper, etc but it would need to be converted to an AA3 xml file at present.
But as i mentioned before AA1.5 it (as I recall) has that 'append' function built in.
Remember "save early and save often".
BTW You can download and try all of those applications and they all come with documentation.

Import/Export ZendAMF project

Similar Messages

Maybe you are looking for