Import failed with canon 6d footage after latest update

After I updated to Final Cut X 10.0.8, I've been getting "Import Failed" messages during the import process when taking in footage from my Canon 6D
The import process also seems to be going very slow (slower than usual)
I've tried duplicating the SD card locally on the hard drive and re-importing, but have gotten the same results.
If I click OK on the error dialogue box, the import will continue. but another box will pop up every 5 to 10 minutes or so
Any ideas?

Hey Russ, it actually works fine for me too the few times I've used it but I point it out as a common denominator with people who have trouble importing that way. Separating the .mov files into their own folder eliminates the camera and card reader, both much slower than just transfering files from a connected drive. But I'm doing newspaper video with Canon DSLRs - including 5D3 video, similar to 6D - almost daily where speed is of the essence and this is by far the most foolproof method I've come across.

Similar Messages

Strange Import Issue with Canon 7D Footage Final Cut Pro X

I'm hoping some folks can help me here as I'm stumped.
I shot around 60 minutes of last evening with my Canon 7D. File sizes ranged from 500MB to 4GB. I imported from my 8GB memory card a 3.6 GB file and a 500MB file with no issue. I then moved on to my 16GB memory card, which was full with around 7 clips, and started importing. I noticed the import was going slow but I was also importing some audio from SD cards on the same card reader, which I've always done in the past, and figured it was just a USB 2.0 bandwidth thing.
I then got an error regarding the Import Failing (see attachment) but the file appeared to have imported without issue. Upon further inspection during the import however, I noticed any file larger than 1GB was showing as the PAL codec (after it imports it correctly shows H.264 but more on that later). I checked the 3.6GB file from my first import and it did not share this issue. While on the shoot I had backed up a number of these files to my iPad so I attempted to import them from there and althought he PAL codec was not listed, I did get the Import Failed error. I also tried a brand new card reader and a different Event/Destination the issue remained.
I've restarted, repaired permissions, and the issue remains. I have never encountered this error and imported a similar amount of footage and clip sizes two weeks ago. I'm stumped, has anyone else seen this?

I did some experiments this morning, and Richard's method worked. Thank you!
However, I didn't follow Richard's steps 2 & 3. When importing, I let FCP copy the files to the FC Events folder. It still worked. In step 1, I did not copy the .THM files to the new folder on my HD.
I did a second experiment that did not work:
1) Copy .mov files (only) from CF card to new folder on HD.---no .THM files
2) "Create Camera Archive" with FCP - Store new archive in its own folder on my HD
3) Tried importing from the new Camera Archive - This crashed just like before.
This tells me FCP is OK with importing individual media files to a FC Event. It seems to crash when it thinks there's a camera involved.
Later today I'll try to import some AVCHD files and see if it crashes on import. For AVCHD footage, you need to rely on FCP's "Import from device" capability. Those files need to be transcoded to be usable at all.
More later.
Marshall

Issue with right-click menu after latest update

After updating Firefox, the right-click menu is showing much more commands than before (Play, Pause, Mute etc. etc.), most of them out of context ("Open Link in New Tab" when there is no link) and none of them working.

Issues with a massive right-click context menu have been reported as caused by Firebug, so make sure to update Firebug to the latest version.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

What's wrong with the Podcast app after latest update?

Dear Apple. What the h... did you do to the Podcast-app in the last update? Nothing works anymore! It won't update new episodes and I can't delete the episodes I've listened to without the app crashing. Get it together and get it fixed. Now! Please!

looks like it was just updated, try and update the app and try again?
-mvimp

Journal Import fails with EC12 issue

Journal Import fails with EC12 issue, we knew the AR credit memo transactions causing this issue have distribution lines with accounted_dr value as zero and entered_dr as non zero, same is the case with accounted_cr and entered_cr.
Issue is with the Credit memos generated out of iReceivables that are creating distributions with null amounts when applied on invoices with rules. Null amounts are on REV/UNEARN distribution lines. Applied patch# 12957348 as suggested in metalink and we noticed more number of such transactions after patch application.
Any pointers are really appreciated. We have over 5000 such lines and is not possible to clear them manually and since these CM's are phased, we are sure to see them again with this issue till it is resolved. Note# 285995.1 didn't help either.
We are on 11.5.10.2 and 10g database.
K

FOR l_rec IN (SELECT ledger_id,group_id from apps.gl_interface
WHERE status='NEW'
AND user_je_source_name='GIS_DATA_CONVERSION'
GROUP BY ledger_id,group_id
ORDER BY group_id
LOOP
apps.gl_journal_import_pkg.populate_interface_control (user_je_source_name => 'GIS_DATA_CONVERSION',
GROUP_ID => l_rec.group_id,
set_of_books_id => l_rec.ledger_id,
interface_run_id =>vl_interface_id,
table_name => 'GL_INTERFACE',
processed_data_action=>'D'
COMMIT;
vl_request_id := apps.fnd_request.submit_request (application => 'SQLGL', -- application short name
program => 'GLLEZLSRS', -- program short name
description => NULL, -- program name
start_time => NULL, -- start date
sub_request => FALSE, -- sub-request
argument1 => 2065, --Data access set id
argument2 => 'GIS_DATA_CONVERSION', --Source
argument3 => l_rec.ledger_id, -- set of books id
argument4 => l_rec.group_id,
argument5 => 'N', -- error to suspense flag
argument6 => NULL, -- create summary flag
argument7 => 'N' -- import desc flex flag
COMMIT;
IF ( vl_request_id = 0 ) THEN
xxgis.gis_conv_util_pkg.debug_print_p(1,'FND_LOG','E001: Journal Import Submission Failed. ' || SQLERRM);
retcode := 2;
EXIT;
ELSE
xxgis.gis_conv_util_pkg.debug_print_p(1,'FND_LOG','P001: Submitted Journal Import Program for group id: ' || l_rec.group_id ||
'and ledger :'||l_rec.ledger_id|| ', Request ID: ' || vl_request_id);
END IF;
END LOOP;

CC app manager update failed with error code 50 after reaching about 35%

Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?

Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time.

Open Item Import fails with a process_flag = -999 or -888

Problem description
============
The Open Item Import fails with a process_flag = -999 in
mtl_system_items_interface. This keeps the item from being imported into
mtl_system_items. The process_flag has to be set back to 1 to have the row(s)
reprocessed.
Solution
======
UPDATE mtl_system_items_interface
set transaction_type='CREATE'
where transaction_type=<'>
Commit;
Re run the Item Import it should go fine.
Regards,
Mehboob

Hi,
It looks like you have posted the same in below thread.
Item Import completed with Process_Flag = 31, 41 and 42
Any way if you have problem you can refer to below metalink notes.
NOTE:103869.1 - Item Attribute vs Template Attributes Using IOI
NOTE:106812.1 - Instructions for Running Item Open Import (IOI) Including Historical Revision Da
NOTE:109628.1 - FAQ for Item Import
NOTE:268968.1 - Understanding Item Import and Debugging Problems with Item Import
NOTE:458544.1 - Inventory Item Open Interface ITAR Template
NOTE:52746.1 - A Guideline to IOI Error Messages and Solutions
Thanks
Vishalaksha

Req import fails with POCIRM-24a: ORA-01400:

Req import fails with.
POCIRM-24a: ORA-01400: cannot insert NULL into ("PO"."PO_REQ_DISTRIBUTIONS_ALL"."D

Please post the details of the application release, database version and OS.
Req import fails with.
POCIRM-24a: ORA-01400: cannot insert NULL into ("PO"."PO_REQ_DISTRIBUTIONS_ALL"."DPlease follow the steps in these docs for details about the error.
Adding To Cart Delivers Error - ORA-01400: Cannot Insert NULL Into ("PO"."PO_REQUISITION_LINES_ALL"."DELIVER_TO_LOCATION_ID") [ID 580002.1]
FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]
Thanks,
Hussein

You Tube not playing video on Firefox with Adobe Flash after latest update

You Tube and other sites are not playing video on Firefox with Adobe Flash after latest update for both. Adobe Flash is working on other sites but not You tube and those sites that may have embedded You Tube videos, I'm not sure.
Adobe Flash does not crash and no error message is showing. All that shows is a dark screen for the Flash video. Right clicking the screen shows only a non-clickable 'Movie not loaded' and the clickable link to the Adobe home page.
I have spent an hour trying things as suggested for past problems similar to this but none have helped.
I have sent sad face letting you know what I think of the latest update because of this which says pretty much the same thing as I have said here.
I have no further info but if I had some input and queries form you I might be able to provide more.

I'm not sure how to remove the 12.xxx version,. I don't understand why it is there, usually updates over wirte the old one as far as I know. I don't know where to find it.
pref .js deleted.
I could not find a user.js
I disabled hardware acceleration on one of them, not sure which and I don't remember how I did it but think it must have been on the flash.
No idea what protected mode is
no new profile, I've never done this.
Ok, did what you have said as much as I could. I have been fidgeting with things now for a couple hours. After doing a CCleaner and Registry cleanse, turning off and restarting the computer, the videos are now p-laying.
I would still like to know how to find and get rid of the duplicate Flash plug in though if you would't mind.
Thanks for the help.

Import failing with no errors

Import failing with no errors
All it says in logs for each table is
. . skipping table "<table_name>"
It's a full import from a 10.2.03 db into a 10.2.0.3 db

Hi,
"INDEXFILE" , this is parameter is specified, index-creation statements for the requested mode are extracted and written to the specified file, rather than used to create indexes in the database. No database objects are imported.
Due to that that Objects are skipping.
The INDEXFILE parameter can be used only with the FULL=y, FROMUSER, TOUSER, or TABLES parameters.
Else you can perform a two step process as stated by Amardeep.
- Pavan Kumar N

Log and Transfer with Canon XF300's after 1.0.2 Firmware upgrade

Is anyone having issues with Log and Transfer with Canon XF300's after 1.0.2 Firmware upgrade?

Yes, just experienced it yesterday at a shoot after upgrading to 1.0.2 two days ago. Have you found a solutions yet?

MDL IMPORT FAILS WITH MDL1261

Hi all,
I am using the OWB Repository Version 10.2.0.4.0 in a AIX server and we face MDL IMPORT FAILS WITH MDL1261
On Oracle Metalink we found the following information. The datatype and background both are set to 113.
Does the suggestion to set the values to 10007 apply in this case?
Thanks !
Sebastian
MDL IMPORT FAILS WITH MDL1261
The upgrade to 11.1.0.7 creates a new property SAP_FTP in the repository. The DATATYPE of this property is incorrectly set to113. The value should be 10007. This wrong datatype causes the NullPointerException because it causes the type not be found when it is expected to be there.
Solution
1. Using SQL*Plus, connect to OWBSYS
2. Check datatype of property SAP_FTP
SQL> select name, datatype from PROPERTYDEFINITION_V where name = 'SAP_FTP';
NAME DATATYPE
SAP_FTP 113
3. Check datatype of property BACKGROUND
SQL> select name, datatype from PROPERTYDEFINITION_V where name = 'BACKGROUND';
NAME DATATYPE
BACKGROUND 10007
The value of DATATYPE for the property SAP_FTP and property BACKGROUND should be the same (10007). If this is not the case, the DATATYPE of property BACKGROUND should be changed.
Proceed to the next step to correct this.
4. Update PROPERTYDEFINITION_V
If the value of DATATYPE is not the same for property SAP_FTP and property BACKGROUND, then correct this as follows:
SQL> update PROPERTYDEFINITION_V
set DATATYPE = (select datatype from PROPERTYDEFINITION_V where name = 'BACKGROUND') where name = 'SAP_FTP';
5. Verify updated correctly
SQL> select name, datatype from PROPERTYDEFINITION_V where name = 'SAP_FTP';
NAME DATATYPE
SAP_FTP 10007
6. If everything looks correct, then commit.
SQL> commit;
Commit complete.

Hi Detlef,
This is the only error I got. Regards, Sebastian
error at line 237,069: MDL1261: Error importing MAPPING GG_OPS.4_DWH.GG_MAP_D_OFFICE.
Detailed Error Message:
java.lang.NullPointerException
     at oracle.wh.repos.impl.foundation.CMPElement.setElement(CMPElement.java(Compiled Code))
     at oracle.wh.repos.pdl.foundation.WBProxy.uncached(WBProxy.java(Compiled Code))
     at oracle.wh.repos.pdl.foundation.StaticCache.uncache(StaticCache.java:120)
     at oracle.wh.repos.pdl.foundation.CacheMediator.uncacheComponent(CacheMediator.java:1435)
     at oracle.wh.repos.pdl.foundation.UncacheService.uncache(UncacheService.java:495)
     at oracle.wh.repos.pdl.foundation.UncacheService.uncache(UncacheService.java:346)
     at oracle.wh.repos.pdl.foundation.UncacheService.uncache(UncacheService.java:640)
     at oracle.wh.repos.pdl.foundation.MemoryManagerImpl.uncache(MemoryManagerImpl.java:530)
     at oracle.wh.repos.pdl.foundation.MemoryManagerImpl.checkMemory(MemoryManagerImpl.java(Compiled Code))
     at oracle.wh.repos.pdl.foundation.CacheMediator.cache(CacheMediator.java(Compiled Code))
     at oracle.wh.repos.pdl.foundation.CacheMediator.cache(CacheMediator.java(Compiled Code))
     at oracle.wh.repos.impl.ProxyFactoryGen.createCMPMap(ProxyFactoryGen.java:4482)
     at oracle.wh.repos.impl.ProxyFactoryGen.createCMPMap(ProxyFactoryGen.java:4468)
     at oracle.wh.repos.impl.ProxyFactoryGen.createCMPMap(ProxyFactoryGen.java:4463)
     at oracle.wh.repos.pdl.metadataloader.MDLImportCreateUtil.internalImportObject(MDLImportCreateUtil.java(Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.MDLImportCreateUtil.importObject(MDLImportCreateUtil.java(Inlined Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.Import.OutputMDLImport.startElementCreateObj(OutputMDLImport.java(Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.Import.OutputMDLImport.startElement(OutputMDLImport.java(Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.Import.OutputMDLImport.processPendingFCOElements(OutputMDLImport.java(Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.Import.OutputMDLImport.startElementPendingFCOAssoc(OutputMDLImport.java(Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.Import.OutputMDLImport.startElement(OutputMDLImport.java(Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.Import.OutputMDLImport.run(OutputMDLImport.java(Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.converter.foundation.ConverterStateMachine.runAll(ConverterStateMachine.java(Compiled Code))
     at oracle.wh.repos.pdl.metadataloader.converter.foundation.ProcessXML$ConvertHandlerBase.startElement(ProcessXML.java(Compiled Code))
     at oracle.xml.parser.v2.NonValidatingParser.parseElement(NonValidatingParser.java(Compiled Code))
     at oracle.xml.parser.v2.NonValidatingParser.parseRootElement(NonValidatingParser.java:326)
     at oracle.xml.parser.v2.NonValidatingParser.parseDocument(NonValidatingParser.java:293)
     at oracle.xml.parser.v2.XMLParser.parse(XMLParser.java:295)
     at oracle.wh.repos.pdl.metadataloader.converter.util.WBXMLSourceReader.parse(WBXMLSourceReader.java:59)
     at oracle.wh.repos.pdl.metadataloader.converter.foundation.ProcessXML.runConversion(ProcessXML.java:356)
     at oracle.wh.repos.pdl.metadataloader.converter.foundation.ProcessXML.run(ProcessXML.java:290)
     at oracle.wh.repos.pdl.metadataloader.converter.foundation.StateMachine.runAll(StateMachine.java:50)
     at oracle.wh.repos.pdl.metadataloader.converter.WBConverter.ConvertXML(WBConverter.java:568)
     at oracle.wh.repos.pdl.metadataloader.Import.MDLImport.process(MDLImport.java:1859)
     at oracle.wh.repos.pdl.metadataloader.Import.MDLRunImport.internalRunImport(MDLRunImport.java:431)
     at oracle.wh.repos.pdl.metadataloader.Import.MDLRunImport.runImport(MDLRunImport.java:503)
     at oracle.owb.Import.ImportServiceManager.internalImportMetaData(ImportServiceManager.java:506)
     at oracle.owb.Import.ImportServiceManager.importMetaDataFromFile(ImportServiceManager.java:355)
     at oracle.owb.scripting.executers.ImportCmdExecuter.startMetaDataImportCommand(ImportCmdExecuter.java:708)
     at oracle.owb.scripting.executers.ImportCmdExecuter.importFromFile(ImportCmdExecuter.java:150)
     at oracle.owb.scripting.parsers.ImportCmdParser.mdlImportCommand(ImportCmdParser.java:302)
     at oracle.owb.scripting.parsers.ImportCmdParser.ImportCommand(ImportCmdParser.java:152)
     at oracle.owb.scripting.parsers.ImportCmdParser.parseCommand(ImportCmdParser.java:112)
     at oracle.owb.scripting.commands.OMBMetaDataImportCmd.executeCommand(OMBMetaDataImportCmd.java:77)
     at oracle.owb.scripting.commands.OMBCommand.cmdProc(OMBCommand.java:69)
     at tcl.lang.Parser.evalObjv(Parser.java:818)
     at tcl.lang.Parser.eval2(Parser.java:1221)
     at tcl.lang.Interp.eval(Interp.java:2189)
     at tcl.lang.Interp.evalFile(Interp.java:2368)
     at tcl.lang.TclShell.run(TclShell.java:124)
     at tcl.lang.TclShell.run(TclShell.java:68)
     at oracle.owb.scripting.OMBShell.main(OMBShell.java:38)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:85)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:58)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:60)
     at java.lang.reflect.Method.invoke(Method.java:391)
     at Launcher.main(Launcher.java:167)

After latest update 1 feb 2014 error msvcr80.dll was not found

after latest update 1 feb 2014 on both my desk top running vista and my lap top running xp both crashed and now itunes wont open i just get failed to star because msvcr80.dll was not found obviously i tunes has a serious bug Help
huve uninstalled from laptop and re-installed with same result

Click here and follow the instructions. You may need to completely remove and reinstall iTunes and all related components, or run the process multiple times; this won't normally affect its library, but that should be backed up anyway.
(99382)

Open GL issue after latest updates: Missing GL version

Having issues with OpenGL after latest updates to OSX and Safari. iTunes will not display cover art and Angry Birds responds glewInit failed: Missing GL version. The is a Mac Pro with 10.7.4 and Safari 5.1.7.
Anyelse seen this? How is this fixed?

Final chapter in this saga for anyone else who experiences this.......run reparPermissions against your disks prior to upgrading. After having to rebuild the boot disk a couple of times and upgrade, had no problems with 10.7.4 but would always get Missing GL Version after Safari update. Ran DiskUtil and repaired permissions prior to Safari update and finally got it to pdate without causing GL issue.
Still working on how to not need to delete my previous backups when rebuilding machine (apparently TimeMachine always tries to create a new back sparse folder and thus may waste original space from your previous backups).
Thanks to A Brody for the suggestion about repairing disk permissions!
Edward

PC freezes,blue screen etc..after latest update

hello
looks like im not the only one with BIG problems after latest updates,my problems are..
1.Pc sees ipod in my computer but itunes wont start and pc locks up when i load itunes.
2.Start itunes without ipod connected itunes works fine but when i plug ipod in pc goes to blue screen and crashes.
3.If i restart pc with ipod still plugged in pc fails to boot after p.o.s.t. just a blank screen.
3.Ipod shows 2000 tracks itunes shows 1500?
4.I had a fwe problems before latest update but now cannot do anything with either.
Should i reset ipod to factory settings, delete itunes and load from cd when i bought ipod or is there an easier option?

Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors. Then re-install the OS.
OS X Recovery
OS X Recovery (2)

Import failed with canon 6d footage after latest update

Similar Messages

Maybe you are looking for