Import from DVD or Flash Drive??

I have tried to import into my Library on iTunes from DVD and Flash Drive. They play in iTunes fine as long as I have the DVD or flash Drive inserted in my computer but if I take them out of my computer and click on a song, a window comes up saying file cannot be played because it cannot be found.
I would like these items to download into iTunes and onto my hard drive but it keeps trying to read from my DVD or flash drive I guess. How can I import these items from the DVD or flash drive onto my hard drive?
I have iTunes 7 and run Windows Vista.
Thanks for your time.

Check your iTunes preferences. Go to Edit>Preferences>Advanced>Importing and make sure the box "Copy files to iTunes Music folder when adding to library" is checked. That way when you add files from one of your external sources they'll be copied to the computer. If this box isn't checked iTunes simply added a reference to the song's current location which of course is no longer accessible when you remove the drive or disk.

Similar Messages

Why can't I edit the photos I just imported from a usb flash drive?

Why Can't I edit the photos I just imported from a usb flash drive? I scanned them into a desktop pc, copied them onto a flash drive, imported them into iphoto. Once I remove the flash drive I'm unable to edit them. Says it can't find the original...or something like that. I appreciate any help you can give me! Trying to get a slide show ready for a funeral, therefore I have an approaching deadline, eek!

Copy the photos from the drive to your desktop import then again and delete the images. If the same mistake appears, there is something wrong with your import settings into iPhoto - > may be you didn't imported the original files to your iphoto library.

Songs that are imported manually from cds or flash drives are randomly deleting from my iphone 5. Sometimes I get an error -54 message first. Sometimes not. What could be causing this and how can I fix it?

I have an iPhone 5 16g ios 8.2 and it keeps randomly deleting the songs I manually put on from cds or flash drives. The songs I purchased from iTunes don't delete just the ones I manually add. It has happened three times, once after I added 399 songs, once after I added 27 songs and once when I added 45 songs. Sometimes an error (-54) pops up but not always, it's just in an instant all the songs I put on are suddenly gone. I have uninstalled and reinstalled iTunes three times, reset all the settings on my phone and also restored my phone to factory settings. Nothing has worked. I have a 4th generation iPod and I have never had this problem. Any and all suggestions/help would be greatly appreciated. Thank you.

x0SiN0x:
Welcome to Apple Discussions..
My first suggestion is to Repair Disk. Here's how:
Insert Installer disk and Restart, holding down the "C" key.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.T Status of HDD at the bottom of right panel, and report)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
Please post back and let me know how that goes.
Here are a few links that may help you to identify the issues:
Resolving Disk, Permission, and Cache Corruption
Tuning Mac OS X Performance
Mac OS X System Maintenance
Please don't hesitate to post back should you have further questions or comments, or with update.
Good luck.
cornelius

Transfer photos from computer to flash drive

I would like to transfer photos from computer to flash drive so I can view them on Smart TV. Only option on computer is to burn to CD or DVD.
This question was solved.
View Solution.

I do not see any info on the Windows version or PC model, so here are generic instructions.
1) assuming the flash drive is seen when opening "my computer" or "computer" double click on the flash drive - it should open another window showing what, if anything is on the flash drive. Leaving that window open, now find the pictures you wish to copy or move and highlight them by clicking each one or a group (select more than one by holding the control key down while clicking in the photos) Now right click on one of the selected photos and then pick "copy" or and then right click on the open flash drive windows, right click "paste"
OR
left click and hold on one of the photos and drag the group highlighted into the open flash drive window, release the left click.
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

HT4106 Will the camera kit allow you to view images from a usb flash drive?

Will the camera kit allow you to view images from a usb flash drive?

You can use a USB flash drive & the camera connection kit.
Plug the USB flash drive (works the same with an SD card) into your computer & create a new folder titled DCIM. Then put your movie/photo files into the folder. The files must have a filename with exactly 8 characters long (no spaces) plus the file extension (i.e., my-movie.mov; DSCN0164.jpg).
Now plug the flash drive into the iPad using the camera connection kit. Open the Photos app, the movie/photo files should appear & you can import. (You can not export using the camera connection kit.)
Using The iPad Camera Connection Kit
http://support.apple.com/kb/HT4101
 Cheers, Tom

Cannot import from DVD disc

I have recorded a 3 minute segment of a newscast using my DVD recorder - it contains video of a close friend of mine. I have a DVD disc which I burned on the DVD recorder from its Hard Drive containing only this short video which I want to give to him. I have tried to import it into iMovie so that I will have it on my iMac as a backup file but have been unsuccessful. I have tried following the procedure posted by "Appleman1958" in Dec 09 with no success - I know that he indicates that it is for iMovie 09 and perhaps that is my problem since I am working with iMovie HD 6. All I get is a 32 sec portion of the video with no sound. The VIDEO_TS folder on the DVD disc contains the following files: VIDEO_TS.BUP, VIDEO_TS.VOB (it appears to be the title menu created by the DVD recorder but has nothing listed on it), VTS010.1F0, VIDEO_TS.1F0, VTS01O.BUP and VTSO11.VOB. I tried dragging ONLY the VIDEO_TS.VOB file onto mpeg streamclip as per the instructions ("drag the non-zero .VOB files and drop them into MPEG Streamclip) but it is only the title menu and there is no video. I tried adding the VTS011.VOB also but again only about 32 sec appears and there is no sound. Sorry, but I am a complete novice at this, do not understand what a VIDEO_TS folder is and what all those files within it mean and need some help here. And yes, I have purchased the Apple MPEG2 QT Component. Any simple, step-wise assistance would be very much appreciated. Thanks.

Hi
Nop. iMovie HD6 are mainly for miniDV tape material imported via FireWire-port.
BUT - it can be done IN SOME CASES
*DVD back for futhur editing*
A. don't put a mini DVD into Your Mac unless it’s a trayloaded DVD burner/reader
B. iMovie’08 prob. 09 can import from DVD (homemade without copyprotection)
C. Read what Karsten collected.
DVD back to iMovie.
.. and here the complete 'full 9 yards' ... .
//discussions.apple.com/thread.jspa?messageID=3822853&#3822853
DVDs are in a socalled delivery format (mpeg2), which isn't meant and
made for any processing as editing... or, as honorable forum member
QuicktimeKirk stated. I use the analogy of the old Polaroid
"instant" cameras. Push the button, wait for the print to develop and
show it off. ..
for using the iLife apps, you have to convert'em first, in
recommended order, choose one of the following tools/workarounds.
• DVDxDV (free trial, 25$, Pro. 90$)
• Apple mpeg2 plugin (19$) + Streamclip (free)
• Cinematize >60$
• Mpeg2Works >25$ + Apple plug-in
• Toast 6/7/8/9/10 allows converting to dv/insert dvd, hit apple-k
• connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
• Drop2DV (free) a free tool claiming to convert DVDs into dv-stream...
• Use iSquint for your conversions . www.iSquint.org
from. Bobby Keene
none of these apps override copyprotection mechanisms as on commercial dvds...
//danslagle.com/mac/iMovie/tips_tricks/6010.shtml
//danslagle.com/mac/iMovie/tips_tricks/6018.shtml
be nice to copy rights ^-^
... and, next time, try the forum's search-feature...
from Beverly M.
//docs.info.apple.com/article.html?artnum=42724
Yours Bengt W

[SOLVED] can't boot from ssd after "reset" from recovery usb flash drive

I have a Twist s230u with the original Hitachi 500GB hdd, running Windows 8.1. I want to replace the Hitachi 500GB hdd in my Twist s230u with a PNY 240GB SSD that i've purchased.
While running Windows from the Hitachi HDD drive I followed the "create a recovery drive" procedure to create a recovery usb. Then I removed the Hitachi HDD from the s230u and installed the PNY 240 SSD in its place. I booted the s230u from the recovery flash drive that I made. I selected the "Reset Your PC" option and then the option to wipe all partition/files. After the Reset completes, I try booting from the SSD but am unable to do so. I just go back to the F12 boot menu.
I put the SSD in a drive dock attached to another computer. Disk Management shows the partitions as follows -
I've looked at the partitions on the SSD after the Reset - Disk Management console shows a 1000 MB Recovery partition, a 260MB EFI System partition, and a 221GB primary partition with volume label Windows8_OS. It is not marked as Boot, Page File, or Crash Dump.
Diskpart shows an an additional 128MB Reserved partition between the EFI partition and the primary partition.
I do notice that the 10.6 Lenovo Recovery partition is not present - but I did make sure that I included that partition on the recovery key - though the files on the recovery key only use 8.03 GB for some reason. Made the key on two different flash media.
Diskpart also shows the following for the SSD:
DISKPART> attributes disk
Current Read-only State : No
Read-only : No
Boot Disk : No
Pagefile Disk : No
Hibernation File Disk : No
Crashdump Disk : No
Clustered Disk : No
(It also looks like this when I run DISKPART from the recovery media with the SSD inside the internal drive bay of the s230u.)
When I did the Reset on the SSD in the s230u, and when I tried to boot from it - I had the Secure Boot disabled, the "Legacy Boot first" option set, etc.
Can anyone point me in the right direction to be able to boot Windows 8.1 from this SSD in the s230u? I've been working on this for a couple of days.
(I also tried cloning the HDD to the SDD using Minitool Partition Wizard, Macrium Reflect, Clonezilla, Acronis, etc - the SSD wouldn't boot after those clone operations either, and I thought maybe I'd have better luck with a reinstall from the USB recovery media.
(I also tried installing from a Windows 8 iso I burned to a DVD. I got a product id mismatch message when I tried to install from that, and I was not allowed to proceed.)

well, I seem to have solved my own problem. Maybe someone will learn from my mistakes.
I went into System Setup, went to the Startup tab, and changed the boot setting from "Both" to "UEFI Only". After doing this I booted from my USB recovery drive, and Reset the PC. After the Reset, I booted the s230u from the ssd, and I booted into a fresh Windows 8 installation.
It seems that the Reset operation could not work properly while the boot setting was "Both" (UEFI and Legacy) and "Legacy First."
I got a clue when I looked at the contents of the EFI System Partition and there was nothing there except a Temp folder. The EFI System Partition had not been properly written by the Reset operation. I got some helpful hints on how to see the contents of the EFI System Partition here - http://www.fixedbyvonnie.com/2013/12/how-to-repair-the-efi-bootloader-in-windows-8/#.U-Qz2_ldW7q
I've also buggered up my original HDD now, so that it won't boot to Windows now. Now to fix that!

How do I boot from a USB flash drive?

I have two different Toshiba laptops. In the BIOS settings I only see the following options.
Laptop 1:
CD/DVD
FDD
LAN
HDD1/SSD1
Laptop 2:
HDD1/SSD1
HDD2/SSD2
eSATA HDD
CD/DVD
FDD
LAN
Is it possible to make either computer boot from a USB flash drive?
Thanks in advance for any help,
yeto

FDD (Floppy Disk Drive) equates to USB in my Toshiba laptops. Seems like it's taking some BIOS designers a long time to catch up with the rest of the computer world!
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Booting a DMG from a USB Flash Drive?

Is there anyway I can boot from a USB flash drive? I don't have a DVD burner to burn the image onto, so I have to resort to this. I'm running an Intel iMac (late 2006) on Tiger.
Any help is appreciated.

If you mean boot up your Mac then the answer is no. If you mean open a .dmg file then the answer is yes.

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this

I want to remove all of my photos out of iPhoto there are approximately 35000 some imported from an old hard drive and a SD Card from my Nikon D500 how do I do this?
I have iPhoto version 9.1.5 (615)
Mac OS X version 10.6.8
I want to do this because when I imported from my old hard drive there was an error message stating that 12 photos were not imported as the programm did not recognise the format even though they were jpegs like the other photos in that particular album. The dates of the photo folders are wrong I have multiple copies of photos and every time I start iPhoto I get the following message 12 photos have been found in the iPhoto library that were not imported would you like to import them No or Yes
if you press Yes the same message comes back again and if you press Yes again the program flicks to last import for 2 seconds and then opens events.
if you press No the message The photos have been placed in the folder/user/judith/pictures/iphoto Library recovered photos then if you press OK the original message 12 photos have been found.............
if you press No at this point the message The photos have been placed in the folder/user /judith/pictures/iphoto Library recovered photos_11 the end number goes up by 1 every time you go through this process
Any help would be greatly appreciated

Did you import an iPhoto Library from the old Hard Drive? Do you still have that old Library?
The way to clear out a Library is to Export the photos - Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
For the annoying start-up message:
Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for a Folder called 'Import' or 'Importing'.
Drag it to the Desktop. *Make no other changes*.
Start iPhoto. Does that help?
If it does then look inside that folder on your desktop. Does it contain anything you want? If not you can trash the folder.

HT5172 Glad to have USB capability on my new iMac. Been in Mac world all of 2 days now. Question - I downloaded photos from a Centron flash drive and am wondering if flash drives have to be ejected the same as on a PC? Can't find how to do it. Thanks.

Been in the iMac world now all of 2 days. I'm glad to have USB capability. I downloaded photos from a Centron flash drive and now need to remove the flash drive. Do you eject flash drives on iMacs as we did on PC's? Can't find an answer in the support area. Thanks...

Yes. All external drives regardless of how they are connected must be ejected before they can be unplugged.

Importing from dvd disk

I am very new to imovie and am trying to import my home videos from a disk. I have a sony camcorder that finalizes disks so you can view them on dvd players. I have no problem watching the disk on my computer, but when I try to import, a screen pops up saying that it is doing something to the unusable files, stops, then nothng is imported. Am I doing something wrong? Or am I not able to import from disks? Funny thing is I have no way of connecting the camera to the computer....no usb ports or fire wire port on the camera. HELP!
mac G4 desktop Mac OS X (10.4.8)

.. I have a sony camcorder that finalizes disks so you can view them on dvd players...
iM supports only import from miniDV, not these point-shot-play-DVDcorders-devices..
Import from DVD:
DVDs are in a socalled delivery format (mpeg2), which isn't meant and made for any processing as editing...
for using the iLife apps, you have to convert'em first, in recommended order, choose one of the following tools/workarounds:
* DVDxDV (free trial, 25$, Pro: 90$)
* Apple mpeg2 plugin (29$) + Streamclip (free)
* Cinematize >60$
* Mpeg2Works >25$ + Apple plug-in
* Toast 6/7 allows converting to dv/insert dvd, hit apple-k
* connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
non of these apps override copyprotection mechanisms as on commercial dvds...
http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
<br

Copying from dvd to hard drive. processs freezes

copying a MP4 from dvd to hard drive. 95% complete then frozen. unable to stop download, or eject dvd. what now?

Open Activity Monitor in Utilities, highlight Finder & Force Quit it, it'll reastart Finder.

How can I save my iMovie Project to a DVD or Flash Drive which can be played on a PC and any DVD player

I have an iMac, purchased in January 2011. How can I save an iMovie project to a DVD or Flash Drive which can be played on a PC or any DVD player

I will give you a basic primer, not going to get to in depth, as far as parameters, size of project, or the storage size of your usb flash drive, etc.
1. you have your finished iMovie project. Under iMovie>Share menu. Choose export using quicktime.
2. make Movie self contained. This way your Mov, Mvi, etc files will be part of the movie and it can play without having to reference the events, because it is actually there.
3. so, now on your desktop ( or any where else set up quicktime to save your file) you will see a quicktime file.
Drag & Drop that file on to the icon of your USB Flash Drive, etc.
4. Details that I omitted because I admit I am not well versed. Most Likely that quicktime file is larger than your USB Flash Drive. You have to use one of quicktime compression work flows, also if you open the just created quicktime file. It will open quicktime player and under the File>Export you have to options. I have a Movie that was 42GB 1080P, I exported it as a 720P, so it would still be playable on a large screen and now the new file was less than 2.5GB.
5. Oh, no i just realized that the file should be playable on a PC, as long as the PC has quicktime for windows installled and you left that USB formated at MS DOS as it came originally, or a PC will not recognize it. Will it open up on your Blu-Ray Player that has a USB port, not sure. Since there is no menu. but, perhaps just pushing play will start movie.
Hope this is of some help.

Why is my import from DVD-R going soooo SLOW??

OK, I'm very new in the Mac world and am still trying to move my photos from my PC. I burned all of the photos to a DVD-R using the Kodak gallery program. I have 3 DVDs of photos.
Now I am in the process of importing into iPhoto. I opened iPhoto, inserted the DVD #1, and then selected import to library. The first thousand photos imported fine, but the last hundred or so have taken FOREVER...like several minutes per photo.
Should I let this just go overnight, or stop the import and try again?
Has anyone ever experienced this slowness when importing from DVD?
Thanks!
CC

CC:
You would be better off copying the files to a folder on the desktop and then into iPhoto as copying from a disk the file first has to be copied to a temp file and then into iPhoto. I don't know how far you are in the current disk import but for the future ones I'd definitely copy to a folder first and then into iPhoto.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.≤br>
Note: There now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Import from DVD or Flash Drive??

Similar Messages

Maybe you are looking for