Import into IMovie slows and stops

Halfway through an import of film from my camcorder, the image loading on IMovie goes into slow motion and stops the import. The playback rate on the camera is at normal speed. I'm using a Sony Handycam DCR-HC26. This is the first time this has happened.

Try it and see!
You should have at least 25GB, better still 40GB, available to import and edit movies. There are a lot of swap files going on in the background.

Similar Messages

Lightroom mobile syncing is super slow and stop for no reason. cannot resume syncing. no idea with the progress of syncing. cannot sync the original file from mobile into desktop.

lightroom mobile syncing is super slow and stop for no reason. cannot resume syncing. no idea with the progress of syncing. cannot sync the original file from mobile into desktop. stuck and cannot process any further.

Hi. Did you trigger a delete data via LR preferences ->Lightroom mobile.
I'm not seeing a catalog connected to your account.
Did you import originals via the connection-kit?
Thanks
Guido

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash. When I save the project, the file size is 20Gb. How can I save just the 33 sec clip?

Non-destructive editing is an important feature of iMovie HD 6.
iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

Trouble opening mpeg movie files and importing into iMovie 08

Hi, I'd be most grateful if anyone could provide any solutions to the following problem...
A friend has emailed me two .mpeg movie files which are parts 1&2 of a home movie which I want to edit in iMovie and burn to DVD. The footage was shot on a miniHDV camcorder (not sure which brand).
Opening in QT 7.6 gives the following warning dialogue: "The movie could not be opened. The file is not a movie file."
The files will however play fine in VLC Media Player, but not in mpeg Streamclip (the file appears to play but the viewer is blank with no audio/video). Trying to import into iMovie is unsuccessful. The iMovie browser won't let me choose the files or drag/drop.
Any ideas. I read somewhere that iMovie 08 can't import mpeg-1 files. Do I need to convert the files, and if so how?
Thanks in advance, and apologies - this is my first experience of video editing.

I have QT Player but it hasn't "kicked in" when I try to import my videos.
Something called PIXE VRF Browser is supposed to help in the conversion. The QT MPEG-2 thingy won't install until I buy QT Pro, according to what I get on the screen.
Sounds like you have too many applications trying to do the same thing. Either use the Pixela Pixe VRF Browser or use the Mac applications (Mac OS Finder, Apple QT MPEG-2 Playback Component w/MPEG Streamclip) but not both to do the same job. The Apple Finder should be able to copy multiplexed VOB/MPEG-2 files from either your PC burned DVD or directly from your camcorder DVD to your MAC hard drive where MPEG Streamclip/QT MPEG-2 component can convert them for use in iMovie '08. Frankly, I don't understand your work work flow or why you want to import your files to a GOP editor in the first place if your goal is to do frame level editing in iMovie '08.
As for Jon's suggestion, I am on dial-up and cannot download big files at 3-4 Kbps snail pace.
What does this have to do with importing your camcorder files to your PC and re-burning them to DVD for use on your Mac? If I were to make a recommendation here, it would have been to use an external hard drive here rather than DVDs for transporting files between platforms and then only if you want the files available to both. If your goal is only to edit them in iMovie '08 or iMovie HD on your Mac, then why not cut out the "middleman" platform?
I wish I could purchase these updates on DVDs but the genies couldn't even tell me if there's such a service.
Totally confused here. Are you saying your DVR-D300 files were commercial produced or that you are dealing with torrent downloads of copy-written material? These are two separate issues with facets beyond the scope of this forum.
As for "platform", I have iMovie08. iMac does not read the mini RAM disks when I connect the camera to a USB port.
Are you saying the Finder doesn't read them or that iMovie '08 doesn't read them? Do you "finalize" your DVDs before trying to read them via USB as the manual states may be necessary as indicated on page 150 of your manual?
How can I find out that iMovie09 will let me import and edit my Panasonic videos?
You could try going to the Apple site and checking the the tapeless camcorder compatibility chart. The Panasonic DVR-D300 is specifically listed along with a hot link for additional information. However, this still won't help you you don't finalize the content.

Stupid Question :) I took some video on my iphone but I did not flip the phone horizontally - have I screwed up the sizing and it will never import into imovie to edit it?

Stupid Question I took some video on my iphone but I did not flip the phone horizontally - have I screwed up the sizing and it will never import into imovie to edit it?

You can do this using Quicktime Pro 7:
Open MOV file in QT Pro (QT 7.6.6)
Window -> Show Movie Properties
select "Video Track"
select "Visual Settings" from lower window
check "Preserve Aspect Ratio"
Click on appropriate rotation icon (MOV rotates!)
Click back on the open MOV in Player Window
FILE -> Save
You can also do this using TransformMovie, available here:
http://www.macupdate.com/info.php/id/21859
Also, MPEG Streamclip can rotate video while maintaining the aspect ratio as well as the interlacing when converting to DV, which is what iMovie prefers as an input:
http://www.apple.com/downloads/macosx/video/mpegstreamclip.html
There is also a plug-in for iMovie from GeeThree called rotate/scale that might do the job:
http://geethree.com/slick/index.html
Further useful information here:
http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#vert-horiz_rotate
http://www.sjoki.uta.fi/~shmhav/SVCD_on_a_Macintosh.html#43-169

Why wont the full length of the chapter in my dvd import into imove. Also I tried to cheat by recording it play off my screen and then import that but it wont record it. Any tips please?

Ive converted my video to imovie compatible format MPEG-4 so why won't the full length of it import into imovie? I cant record it using screen record either, the recording shows me clicking around and trying to record but after a split second of the desired footage shows it then cuts out to white and grey checkers. How can I convert it better or record it when playing off my screen please?

Do you have a backup that you can restore from? Your old hard drive seems to be the problem.

Why do 4 video clips import into iMovie and one doesn't?

I attempted to import 5 short clips into my MacBook Pro from the same event, shot with an ipad2. Four of the clips easily imported into iMovie. IMovie said that the fifth clip wouldnt import because it is 'not compatible with iMovie'. All of the clips are 1280x720, H.264/AAC, encoding 7.0.2. Importing to IMovie 11, version 9.0.9. I've read thru some of the strings but haven't quite found this problem. Any ideas?
thank you

I think this is an SD memory card camera. It does not work in a format that FCE uses. FCE only works with DV, HDV or AVCHD material. Everything else has to be converted to a format FCE works with.

Older DV Tapes Will Not Play or Import Into iMovie

I have a lot of DV tapes shot ten years ago on a JVC camcorder that I want to import into iMovie.
I have a new Canon Vixia hv 30 and I'm assuming these older mini DV tapes are compatible because these old tapes play fine in the camcorder itself, and also on my TV, but when I try to import them into iMovie, they do not display in the iMovie import window. However, new tapes shot recently with the new hv 30 display and import just fine.
Is there a problem with the old tapes being incompatible in some way I'm not understanding?
Dino1956 answered a similar problem in 2008:
*iMovie Camcorder Import Fix*
*Connect your camera. put it in 'play' mode (sometimes also called vcr). start up imovie (hd or 08; both work, but i use HD). go to the blue 'import' screen. it should just say 'camera connected'.*
*Now comes the trick. don't click import, but instead put your camera in 'record' mode. you should now see whatever it is that your aiming the camera at on your computer screen.*
*QUICKLY put your camera back in play mode. again very quickly press the 'play' button, either on the imovie import screen or on your camera. your DV tape will start to play back.*
*-On my computer, the video now suddenly shows up in imovie! You can now click the 'import' button in imovie, and imovie will start importing the tape in realtime. This is a bit slower than the normal import method, but hey, at least you can now get your video into imovie!*
...but this solution doesn't work for me. I cannot "quickly" click the Play button on the camera monitor or in the iMovie window after switching from record to Play on the camera because there is a 5 second time lag on both the camera's monitor and in the iMovie window while the iMovie screen/camera monitor switches over from Record to Play.
Is there any way I can get older DV footage into iMovie from my Vixia hv 30? My resources are at a very low ebb right now.

I found a clue on the www.hv20 website: Old DV tapes recorded before HDV...you need to go into the hv 30 menu and select "DV" rather than "HDV", then the video shows up in the iMovie import screen and imports easily.

What kind of video formats can i use to import into imovie?

what kind of video formats can i use to import into imovie?

Hello,
Adobe stopped supporting flash for android since ICS. You may still be able to download the latest (old) flash player "at your own risk" from Adobe archived flash player versions:
http://helpx.adobe.com/flash-player/kb/archived-flash-player-versions.html
Please read the disclaimer at the end as it is not advised to install unsupported flash versions.
As for video streaming, there are lot of apps for that and it's just a matter of your preference.
Hope that helps

How can i import into imovie using the camera's built in memory?

How can I import into imovie from my cannon video camera built in memory. All that comes up when I connect the USB cable is what is stored on the memory card and it doesn't give me the option to use what is stored on the built in memory

That is not a feature of iPhoto - suggest to Apple - iPhoto Menu ==> provide iPhoto feedback.
With the new Photo app later this year the integration between IOS and the Mac will be much greater
LN

Why do some AVI files not import into iMovie?

Some of my AVI video does not import into iMovie. When I try, it gives me a non-specific error message. Is there a way I can import it? Other AVI files import with no problem.

AVI is a container, not a format; the audio and video in an AVI may use any codec, and some codecs can't be used in Mac OS X. Installing Perian may help.
(34138)

Certain mp4 files are not importing into iMovie

I downloaded various files from the video page at a blog website [ http://www.911blogger.com/ ]; they're mp4 QuickTime. They won't properly import into iMovie, and quickly return a "An Unknown Error Has Occured" message box.
This is confusing, especially since iMovie can make mp4 movies. And since mp4 is a QuickTime format -- and QuickTime is made by Apple, who also makes iMovie.
It doesn't matter what size of file; none import. I asked the guys who own/operate the blog website if they put any special locking features on their video file downloads from their podcasts, and they said they (paraphrasing) "didn't do anything except use an iPod video converter" or something to that effect.
So, any idea's?

I have QuickTime 7.1.1 installed, with a license for QuickTime Pro.
QuickTime Pro shouldn't affect the ability to import to iMovie. All QuickTime Pro does is enable certain movie editing commands in QuickTime Player. It doesn't add any codecs or new elements to QuickTime.
But third-party QuickTime codecs could certainly be affecting iMovie 6's ability to import a movie. If any are installed, they should be temporarily removed and the Mac restarted.
They are discussed here:
http://discussions.apple.com/message.jspa?messageID=1852869#1852869
Karl

I need to share raw footage that is already imported into iMove, how do I do that?

I have raw footage imported into iMovie '11 that I need to beable to give to someone else, is this possible without first turning it into a project and exporting it that way?

Go to ~/movies/imovie/imovie events, then copy the files to a DVD or an external hard drive.

1080P movie imported into iMovie at optimised 920x540 but is oddly finalised at 1080p?

Hi.
I have a video shot in 1080p which I imported into iMovie from my camcorder using the optimised setting (920x540px). I edited the movie and now want to finalise it. But I'm wondering why when I click finalise the project it says it's doing so in 1080p?
I assumed when it imported the project it did so at 920x540px and would have disgarded the additional data 1080p data.
What's happening?
Thanks!

Just had a thought. Something AppleMan1958 said in another post.
Is this because iMovie also imports the original 1080p file into the Camera Originals folder? So when I finalise the edited project it does with the original 1080p footage?

Is an 8.7GB file too big to import into iMovie 9?

Is an 8.7GB file too big to import into iMovie 9? I am using iMovie 8.0.6 on a Macbook Pro running OS 10.6.8 on 2.26 GHz Intel Core 2 Duo with 2 GB Memory. I can't get my movie file to import into iMovie...any advice would be much appreciated!

When you import into iMovie, your video is converted into DV format. This uses 13 GB per hour of video. So the first thing you have to do is make sure you have 26 GB free on your hard drive, plus another 10GB free for OSX to perform, plus 10GB free if you plan on burning a DVD.
iMovie has non-destructive editing. If you have used any part of a clip and discard the rest, that entire clip is still saved in your project - unused but eating up disc space. If you use no part of a clip and discard the clip, then the clip can go in the trash and you get back disc space. So...
If you import 2 hours of video (26GB) as one clip, and only use 2 minutes, your 2-minute segment retains its 2-hr source in memory. 2 min = 26 GB.
One thing you can do is set the iMovie preferences to automatically create new clips every 3 minutes. (2 hours of 3-min clips = 40 clips.) This allows you to find the 2-minute segment you want and delete all of the unused clips. Say your 2-minute segment comes from 2 of these 3-min clips, so you keep 6 minutes of source footage and delete the rest. Clips that are entirely unused will be completely deleted and give you back disc space. At .65 GB per clip, your 6-minute project is now only 1.3 GB, and you've just regained 24.7 GB of disc space.

Import into IMovie slows and stops

Similar Messages

Maybe you are looking for