Import Meta Data from CSV - Export Meta Data to CSV

Ability to import meta data into selected images from CSV file containing a number of fields, one of which is file name. The other fields would be selected tags to import.
Import logic would be, Where file name in column 1 matches current selected filename, then take following fields 2, 3, etc and import into Bridge.
Export selected meta data from selected files to CSV to form reverse of above to allow edit of data in Excel etc.
Further enchancement on import would be to allow instead of just filename, but date/time range matching.
Logic would be, Where date/time in column 1 is within X hours of selected
image creation date/time then import following fields into image meta data.
Useful for example if you already have a GPS tracklog in CSV and want to try and update images with GPS. Assuming camera clock approx same as GPS clock.

The issue was within the .csv file. There were duplicate records that were attempting to load as the ID value. After deleting the duplicate records, the transformation file ran successfully.
Debbie

Similar Messages

The error about loading data from ODS to master data.

hi,experts,when I load the data from ODS to master data,there is an error messege:
" InfoSource 8ZPA_0022 is not defined in the source system.
     Message no. R3005
Diagnosis
     The InfoSource 8ZPA_0022 specified in the data request, is not defined
     in the source system.
System response
     The data transfer is terminated.
Procedure
     In the Administrator Workbench of the Business Information Warehouse,
     update the metadata for this source system, and delete the InfoPackages
     belonging to InfoSources that no longer existing ."
But,the InfoSource 8ZPA_0022 is not problem,how can I do？thanks.

Hi,
as suggested by the message, did you update the meta data by doing a replication of datasources for the source system 'myself'? If not, do so and reactivate the communication structure. Then reload.
regards
Siggi

IMPORT a VIEW from an export dump file

I'm trying to import a view from an export dump file. In using the Import Utility, do I use the TABLE parameter and give the View name ie: TABLES=view1
null

Only I want to do is import ONE view from an export dmp file that contains hundereds of table, many views and procedures. I do not want to reimport everything from the export file.

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizon

Verizon is using the Elipsis tablets to steal data from their customers. The only way to stop data from registering as cellular data is to pull the SIM card. This occurs with wifi enabled and cellular,dara disabled. If,you take your tablet to a Verizonstore they will upgrade your data plan to cover the overage and credit the upgrade. You will then have to remember to downgrade your plan or continue to pay for more data. Verizon, how would you feel if I walked into one of your stores and started filling my pockets with merchandise? If cought can I just give the product back and say "oops, sorry"

Today, my FCC complaint hit the same person working on the BBB complaint. Jimmie has been very nice and seems willing to work with this problem. We have been able to come to an agreement. I paid the purchase price for the phone and he returned my upgrade and unlimited data plan. This is what would have occurred if Verizon had given me correct information to begin with. I am happy with this result. He also brought quite a few instances concerning the handling of my transfer and upgrade that did not follow proper procedure. I am also confident that I would not have resolved this without complaining to BBB and or FCC. Verizon had no interest in solving the problem nor did they show any propensity to keeping a 20 year client. Even though this last CSR was very polite and helpful, his sole job is to respond to formal Federal and State complaints. He is required by law to address every complaint and report the reporting agency the agreed upon results - good or bad. Again, I suggest - If you are not getting the proper customer service, complain to someone outside of Verizon. Jimmie had not received any complaints registered with Verizon directly and I still have not had any contact with any other management representative that I was told would call.

Dump while loading data from POS DM to data source

Hello experts
I'm loading data from POS DM to data source 0RT_PA_TRAN_CONTROL, when amount of data is more then 1800000 records i get dump with the message "Unable to fulfil request for 8004 bytes of memory space."
How can i divide data on small packets? or can you suggest other solution?
I already check ztta/max_memreq_MB parameter and it's set to maximum.

Check the parameter ztta/roll_area in RZ11 , changes to this parameter would affect all the datasources.
The Maximum recommended size of a datapackage is 100.000 records and If a delta load is big, then divide the package into smaller using the parameter MAXDPAKS.
check this note for more info 1292059.
Also check below notes
1102641 Consult: Dump during insert in PSA table due to incorrect values
1163359 Load methods using SMQS or SAPI-controlled to transfer to BW
1160555 Determination of maximum data packages in a delta request
Points are appreciated.

Import data from table,export to excel----URGENT

Dear all ,
I have a requirement of importing data from database table and then export those data to excel. that means irrespective of column number and row number present in the table,i have to export that table's records to excel. In my from i have text field, by which user will enter table name, it will validate whether DB have that table....if that table present in DB , i have to export it's data to excel..............
any kind of help and suggestion is welcome

Welcome to the Oracle Forums. Please take a few minutes to review the following:
<ul>
<li>Before posting on this forum please read
<li>10 Commandments for the OTN Forums Member
<li>Announcement: Forums Etiquette / Reward Points
</ul>
Please provide us with your Forms version, Java version and Client OS version. This information is needed in order to offer you potential solutions. Performing this task in Forms 6i (Client/Server) is completly different than in Forms 9i/10g/11g.
With respects to your "Urgent!" request. You have to understand that forum contributers are all volunteers - this is not our full-time job. If your issue is truely urgent, it is always best to open a Service Request (SR) with Oracle Support than to rely on the forum for an urgent reply! ;-)
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

FDM export to HFM - 2nd export did not clear all data from 1st export?

Has anyone experienced exporting a replacement FDM file to HFM where the 2nd file did not contain an account that was present in the original file and that account/value in the 1st file then remained in the HFM trial balance and caused it to be out of balance? Does the replace export option not clear all the prior file data? The only unusual part of it might be that the problem account was derived using logic group script? Thanks.

Thanks Hensen - Sure, it was easy enough to fix once I deduced what the problem was - although my solution was just to use the data clear function and reload. The real question is how to prevent it from happening again and it sounds like I can't do much about it - other than trying to train the users to watch out for do-over files that have fewer accounts than the original load?? Am I wrong to think that HFM should try to fully clear all previous data from a load file if there is a replacement or at least try to validate whether or not all prior accounts have been repopulated?? There's plenty of good validation in the validation step of FDM. Why not during the export step? If this makes sense, I'll put in another "enhancement request" to support.

Photoshop not seeing lens model in exif data from A3 export

Hi, I am trying to use the lens correction features in CS5 but the lens type can't be read in the exif data of an image I've exported from A3. It sees the focal length and body type. The lens type is listed in the Metadata Inspector in A3. I took the image into iPhoto and checked "extended photo info" and the lens type isn't there either. This happens with at least 2 lenses. One prime and one zoom. Any ideas?

Hi again
Having played with metadata a bit more, it is possible to include EXIF data for the lens size etc.. eg...EF300mm f2.8L IS USM But it doesn't append the manufacturer's name, eg I use Canon, yet 'Canon' is not appended to the Lens data like it is to the camera name..
In the library Inspector click > Metadata > where it says 'General' click the down arrow, then click > Edit > from the window that appears click > EXIF > from the drop down list click > Lens (scroll down a bit)
The lens you used will now be appended to your data.
I have not tried exporting this to Photoshop so maybe you could post back if its possible to export this data to PS or not.
Maybe someone has information on this and can chip in here with advice....
Hope this is helpful....... Gerry....
PS to all reading this, I also noticed while playing around with this ( I have not delved into metadata too much since Ap2) that all my personal details like mobile number, address, email etc are all appended by default, I imagine my address book info has been used here.
A useful feature indeed while selling photo's, or if you intend it to be there..... but not so good if you are not aware it's there in the first place.....!
Just a shared thought to whom it may concern....... Gerry.
Message was edited by: windhoveruk

Extracting specific data from multiple text files to single CSV

Hello,
Unfortunately my background is not scripting so I am struggling to piece together a powershell script to achieve the below. Hoping an experienced powershell scripter can provide the answer. Thanks in advance.
I have a folder containing approx. 2000 label type files that I need to extract certain information from to index a product catalog. Steps to be performed within the script as I see are:
1. Search folder for *.job file types
2. Search the files for certain criteria and where matched return into single CSV file
3. End result should be a single CSV with column headings:
a) DESCRIPTION
b) MODEL
c) BARCODE

Try:
# Script to extract data from .job files and report it in CSV
# Sam Boutros - 8/24/2014
# http://superwidgets.wordpress.com/category/powershell/
$CSV = ".\myfile.csv" # Change this filename\path as needed
$Folders = "d:\sandbox" # You can add multiple search folders as "c:\folder1","\\server\share\folder2"
# End Data entry section
if (-not (Test-Path -Path $CSV)) {
Write-Output """Description"",""Model"",""Barcode""" | Out-File -FilePath $CSV -Encoding ascii
$Files = Get-ChildItem -Path $Folders -Include *.job -Force -Recurse
foreach ($File in $Files) {
$FileContent = Get-Content -Path $File
$Keyword = "viewkind4"
if ($FileContent -match $Keyword) {
for ($i=0; $i -lt $FileContent.Count; $i++) {
if ($FileContent[$i] -match $Keyword) {
$Description = $FileContent[$i].Split("\")[$FileContent[$i].Split("\").Count-1]
} else {
Write-Host "Keyword $Keyword not found in file $File" -ForegroundColor Yellow
$Keyword = "Code:"
if ($FileContent -match $Keyword) {
for ($i=0; $i -lt $FileContent.Count; $i++) {
if ($FileContent[$i]-match $Keyword) {
$Parts = $FileContent[$i].Split(" ")
for ($j=0; $j -lt $Parts.Count; $j++) {
if ($Parts[$j] -match $Keyword) {
$Model = $Parts[$j+1].Trim()
$Model = $Model.Split("\")[$Model.Split("\").Count-1]
} else {
Write-Host "Keyword $Keyword not found in file $File" -ForegroundColor Yellow
$Keyword = "9313"
if ($FileContent -match $Keyword) {
for ($i=0; $i -lt $FileContent.Count; $i++) {
if ($FileContent[$i] -match "9313") {
$Index = $FileContent[$i].IndexOf("9313")
$Barcode = $null
for ($j=0; $j -lt 12; $j++) {
$Barcode += $FileContent[$i][($Index+$j)]
} else {
Write-Host "Keyword $Keyword not found in file $File" -ForegroundColor Yellow
Write-Output "File: '$File', Description: '$Description', Model: '$Model', Barcode: '$Barcode'"
Write-Output """$Description"",""$Model"",""$Barcode""" | Out-File -FilePath $CSV -Append -Encoding ascii
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable)

Different discount date from that of due date without using payment terms

Hi,
We would like have separate discount due date from due date without using payment terms for each invoice.
We wants to modify ERDK-FAEDS but unable to find suitable event/exit for the same.
So can anyone suggest any event where this can possibly be achived.
Regards,
Paresh

Hi,
We are using continuous days for working out due date from document date.
But for discount due date business sought to provide only working days (say 7 days) from document date.
So as to satisfy this requirement, I had adopted event R436 where system intially takes values provided but somehow it gets cleared in below lines. So I am unable to find a workaround to resolve this issue.
PERFORM get_user_exit_function USING 'R436'.
LOOP AT t_fbstab WHERE funcc <> 'ISU_SAMPLE_R436'.
    tmp_erdk = p_iiu-print_doc-erdk.
    tmp_erdz[] = p_iiu-print_doc-t_erdz[].
    CALL FUNCTION t_fbstab-funcc
      EXPORTING
        x_invoice_param    = p_param
        x_invoice_unit     = p_iiu
      TABLES
        xy_printdoc_lines = tmp_erdz
        y_new_bill_lines   = tmp_new_bill_lines
      CHANGING
        xy_printdoc_header = tmp_erdk
      EXCEPTIONS
        error_message      = 1.
Regards,
Paresh

Getting Data from Structure and Store Data into Table using Function Module

Hello...
we are created a function module to import 2 structures in the systems and want to read the data from the structure into a customized table when the fucntion module is called. However, whenever the function module is run, we only managed to have one data into the customized table whereas the actual results is that there will be a few records in this customized table.

Hi,
It should be something like this...
TABLES ZRESMORT.
DATA E_ZRESMORT TYPE STANDARD TABLE OF ZRESMORT WITH HEADER LINE.
SELECT * FROM ZRESMORT.    <=====================
DELETE ZRESMORT.              <================== It is deleting all the records in your Z table
ENDSELECT.    <===============================
Loop at I_CKF_CONTRACT. " Assuming this is the Main Table
Read table I_CKF_PROCESS with key ." Here you will read this table to get the corresponding records of Table I_CKF_CONTRACT
E_ZRESMORT-MORT_FT_ID = I_CKF_CONTRACT-COMMON-CONTRACT_ID_EXT.
E_ZRESMORT-MORT_KDATE = I_CKF_PROCESS-TECHNICAL-KEY_DATE.
E_ZRESMORT-MORT_TSTAMP = I_CKF_PROCESS-TECHNICAL-TIMESTAMP.
E_ZRESMORT-MORT_FLAG   = 1.
E_ZRESMORT-MORT_BUPA   = I_CKF_CONTRACT-BUPA-BUSINESS_PARTNER_ID.
E_ZRESMORT-MORT_PORTFO = I_CKF_CONTRACT-BUPA-PORTFOLIO_CAT.
E_ZRESMORT-MORT_FT_ID_DUM = I_CKF_CONTRACT-COMMON-CONTRACT_ID.
INSERT INTO ZRESMORT VALUES E_ZRESMORT.
IF SY-SUBRC EQ 0.
ENDIF.
endloop.

XML Schema to generate table data from a repeating subform data

Hi All, I would like to have a check box that when checked, will hide a quotation form, and make a purchase order form visible, carrying over some of the field data from the quotation form into a new table on the Purchase order form. I've attached this form at https://workspaces.acrobat.com/?d=pqpsXx5VPi*LkMeVKrX57w if you would like to take a look. When the checkbox is unchecked, it will hid the PO form, and make the quite form visible.
The idea behind this is that my client will create his quote and send t to his customer. Once the customer accepts the quote, he can just click a button to generate his purchase order that he will send to his supplier.
It seems that because I've got buttons to add rows on the quote form that the problem is more complex. I would be able to do this myself if the table had a fixed number of rows and I was able to use global fields and naming each cell something different, but beacuse it's a single repeating subform, I can't seem to make it work at all.
I understand that because its a repeating subform that I need to create an XML schema to accomplish this, but also can't figure out for the life of me how to actually create the schema. I've been reading tons of tutorials, but no clue how to apply it to my specific need. I have only been able only find info on how to bind the data source once it's been created.
I would be forever grateful if anyone could help me out.
Thank you!

I've edited your form and put it here.
Here's what I've done:
Inserted script into your checkbox renamed Accpted that hides/shows the Purchase Order/ Sales Quotation
I've included a scripting object with a function I wrote to transfer data from like named fields/subforms from one section to another
Inserted a few common fields into your Purchase Order table
What you need to do is complete the development of your Purchase Order table. Make sure the common fields between the quote and purchase tables have the same names in order to transfer the data.
No schema necessary.
Kyle

How to extract data from a structure?(Data Dictionary)

Hi all,
       This is regarding extracting data from a structure.
For Eg:if we want to extract data from a structure ADDR1_DATA,How will we do that in report programming?Structures on its own has no existence unless it s attached to a database table or view.when am using 'Where used List' on that structure also I am not getting any database tables or views.What can I do about this?
Thanking you,
anjaly

HI Anjaly,
as you said structure does not have any value .. unless something is added to it..
So just use the structure to define the type of the sttructure you want..
Or to include it in your itab like..
data : Begin of itab occurs 0.
       include structure ADDR1_DATA.
data i type i.
       end of itab.
you cannot directly extract data from the structure ADDR1_DATA..
regards
satesh

Erase data from open hub destination data service

Hi,
I'm getting an error trying to delete data from a cube, for which data are extracted using open hub service and loaded into a table.
The error given is the following:
Request updated in 1794 already by 1795 target DTPR_4EEX9CGGXLTU2QIPWUAIEUDZK DTP request (ZRAPPEL)
Message no. RSM077
Diagnosis
One or more DTP requests have already updated the request.
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Zrappel data is the open hub destination. But it is clear where requests for this destination, to let me delete the cube data.
Thanks.

Hi,
Procedure
Firstly, delete all update requests from your targets. Then you can delete the source request.
Follow the same steps above , that means delete the requests from the Cube Zrappel.
right click on the cube -
> Delete Data
now the syatem will promt you asking
Do you want to delete the content of data target Zrapple ?
say yes for it .
hope this will solve your problem
santosh

Refresh buffer when rfc gets data from crm and the data was updated from R3

hi all
I have a program in r3 for maintenance of partners, so the user can create or update a CRM partner from the R3 system. if you are updating a partner, the program gets the data from CRM via RFC and saves the changes via zBDoc. if the user modify a partner and then try to check if the info were updated, he needs to leave the transaccion and run it again in order to the RFC gets the data updated. how I can avoid to leave the transaccion? i tried with a buffer refresh and commit but it doesn't works.... any idea?
tnks

Hi Alan,
THANK YOU for that hint. That brought me a giant step further, seriously! Many thanks! Now my report is running and hourly creating an instance, reeally nice!
But of course, the next problem is arising rapidly: Now that I got my report creating instances, the funny thing happening is the following: I created the WebI report with the WebI-Rich Client and then saved it to the server. In InfoView I scheduled the instance creation and the strange thing is now: The values differ. In the original report the values for some percentage ratios (e.g. 50%) show up as they should with four decimals: 0,5000 (German way of displaying numbers with decimals). BUT: In the instances of the same report, exactly these numbers would appear as 0,0000. So the numbers would just not be displayed! But all other numbers (all numbers not having decimals) would show up as they are supposed to even in the instances of the report.
This is kind of strange to me. Does anybody have a clue what the problem might be?
Many thanks again! And I hope I am not bothering you guys with these "newbie" questions.
Thanks and best regards,
Kai

Import Meta Data from CSV - Export Meta Data to CSV

Similar Messages

Maybe you are looking for