Import Settings or Viewing Problem

I have just imported some pictures from my Canon Powershot G15 and I seem to have a problem with my settings. This is a new issue for me. I have also just imported shots taken on my Canon 5D MkII without any problem. The G15 shots seem to have had a 'tilt' applied, which has created white areas. These were not on the original shots when viewed in the Import module, nor are they visible in the the file when viewed using Microsoft picture viewer so it must be a setting LR is applying.
The only Import setting I am using is Copyright, although I did start with a lens correction in the Develop Settings but removed it for some test shots.
My attached image shows the two screens I use with LR5 on the left and Windows viewer on the right. You can see the white area in the shot on the left, which is absent from the same shot viewed in Windows. Both are RAW files.
This is a new problem and I'd appreciate any help
Scott

Update - I have just opened the image from LR5 into Photoshop CC and the problem persists, i.e. it opens with the same areas but they are transparent in PS. I tried opening direct from explorer into ACR and same problem. LR and PS are 'seeing' something in these files that make them open with distortion.

Similar Messages

Finding proper import settings

I have been having a problem with my audio not lining up with my video when I export a project. From reading some forum posts here it seems like it may be import settings causing the problem but I have no idea how to select the proper import setting. Here is some info that I can find, please let me know if you need more and where I can find it.
They are .mod files from my Panasonic SDR-H200 digital camcorder. I am just trying to splice together a few files from my daughter's birthday but when I export it as a quicktime file for vimeo. I am using Eugenia's guidelines for export here. However my audio is ahead of my video.
The files are
width:704
height:480
data rate:9542kbps
total bitrate: 9798kbps
frame rate: 29 frames/second
audio
bit rate: 256kbps
channels: 2 (stereo)
audio sample rate: 48 kHz
Thanks for any help or direction, I really seem kind of clueless with the video although I picked up photoshop and illustrator OK on my own through tutorials, trial and error etc.
Tracy

Use the Hard Drive/DVD project settings and you should be fine. (Make sure it matches your video, whether you're using the 4:3 or 16:9 mode.) You don't say which version of the program you're using, so I can't tell you the exact setting to use -- but a standard def hard drive camcorder setting should work.
Your camcorder is just a standard-def hard drive camcorder.
As you add clips to the timeline, you'll see red line above the clips. This means you'll need to render your timeline regularly as you work by pressing the Enter key. (The red lines above the clips will turn green.)
In my books I offer more specific information on working with standard def MPEGs and my advice on why and how it's wisest to convert them to DV-AVIs before you bring them into the program. You'll find a lot of that information in the FAQs to the right of this forum.
http://forums.adobe.com/thread/415317?tstart=0

Can no longer change bit rate in AAC custom import settings

I've been re-ripping all my CDs at the new higher bit rate. My import settings were AAC Encoder -- custom, originally set to 256 kbps, VBR, and auto for the other two settings. However, some CDs I wanted at a lower setting, so I would go change the bit rate to either 192 or 224 (just so I'd have more room on my ipod) and there wouldn't be a problem. But now it's stuck -- the pop-up box no longer opens when I choose import settings, AAC Encoder, Custom, so I can't change the bit rate or anything else, and it's stuck on 224 kbps. I can still change bit rate and other settings in the custom menus for MP3, WAV, etc., just not AAC. A repair install of iTunes did not fix the problem.

Hi, Ed. I am running iTunes 9.0.3.15. When I click custom, the settings description in the details box display what they were before this thing happened = 112 kbps (mono)/224 kbps (stereo), VBR, optimized for MMX/SSE2. The pop-up dialogue box that used to appear (where you could choose the specific bit rate from the drop down menu) does not appear at all.
However, when I choose anything other than AAC Encoder, and then pick custom, the pop-up box appears and I can choose the bit rate and adjust the other settings as usual. It's just not happening for AAC Encoder anymore. Since the total un-install (following Apple's specified order) and reinstall didn't work, I'm baffled how to fix this .... (If it makes a difference, I changed the bit rate in the custom box while a CD was being burned...Apparently that was stupid, but I had done it previously without incident.) Thanks.

Not all characters showing up in "Import Settings" dialogue

On the "Import Settings" dialogue in preferences, not all characters are shown when you select an encoder and use a custom setting.
For example:
When you select AIFF encoder and click "Custom...", sample rate and channel is shown as "sample rat" and "channe".
Can someone tell Apple to fix this?

Sounds like you have "Compilations" switched on.
In Itunes look at "get info" for the missing artists and see if the part of a compilation box is checked.
On you iPod go to settings>compilations and toggle it to off
To get the artists to show up on the Ipod you only need to do step 2.
When you have the compiliations features switched on (in either iTunes or iPod) artists that only have albums that are compilations will not show up in the artist list.
As for your other problem you can sort the columns by clicking on the title bar at the top, to sort by artist or you can add something to the "Greatest Hits" album title to differentiate it - for example all my greatest hits albums are titled GH - Artist so I know which one is which

Import and directory synchronize problem

I'm having a problem importing new pictures into an existing file directory which appears in my Lightroom catalog. The photos import normally but show up as a new directory entry off the root of the Lightroom catalog. When I attempt to move/drag them to the existing Lightroom directory I want, I'm told they can NOT be move because they are already there which I can confirm in the Windows file system. Strangely, synchronizing the directory in Lightroom does not find the files even though they are physically there but not showing up in the catalog. This is a new problem but I can't associate it with anything I've changed in Lightroom lately. Can anyone suggest what might be going on and more important how to fix it? It is very irritating. I have another problem and I don’t know if it is related or not. Lightroom will NOT remember changes I make to calalog location I make through the edit, calalog settings menu or my watch directory for auto import through file, auto import, auto import settings. It just ignores them and uses what is already there. Again, any suggestions would be greatly appreciated.

The idle-timeout on DSEE was set to none, which I believe is the default. I tried setting it to 1200 and 2400 seconds without success.
h3. get-ldap-data-source-pool-prop
<pre>
client-affinity-bind-dn-filters : any
client-affinity-criteria : connection
client-affinity-ip-address-filters : any
client-affinity-policy : write-affinity-after-write
client-affinity-timeout : 20s
description : -
enable-client-affinity : false
load-balancing-algorithm : proportional
minimum-total-weight : 100
proportion : 100
sample-size : 100
</pre>
h3. get-ldap-data-source-prop
<pre>
bind-dn : none
bind-pwd : none
client-cred-mode : use-client-identity
connect-timeout : 10s
description : -
down-monitoring-interval : inherited
is-enabled : true
is-read-only : false
ldap-address : localhost
ldap-port : ldap
ldaps-port : ldaps
monitoring-bind-dn : none
monitoring-bind-pwd : none
monitoring-bind-timeout : 5s
monitoring-entry-dn : ""
monitoring-entry-timeout : 5s
monitoring-inactivity-timeout : 2m
monitoring-interval : 30s
monitoring-mode : proactive
monitoring-retry-count : 3
monitoring-search-filter : (objectClass=*)
monitoring-search-scope : base
num-bind-incr : 10
num-bind-init : 2
num-bind-limit : 1024
num-read-incr : 10
num-read-init : 2
num-read-limit : 1024
num-write-incr : 10
num-write-init : 2
num-write-limit : 1024
proxied-auth-use-v1 : false
ssl-policy : never
use-read-connections-for-writes : false
use-tcp-keep-alive : true
use-tcp-no-delay : true
</pre>

IWeb Site import to DW - livemode problem

Hi! I´m new to Dreamweaver and I´m trying to import i site made in Apples iWeb to DW CS6. I can see the site allright using a local copy and It´s also possible to edit the code. I would like to edit the page in design mode, is it possible? I can´t get it to work. Please help if possible. Yours sincerely, Fredrik

OK thank´s for the reply!
/Fredrik
4 nov 2014 kl. 22:10 skrev Nancy O. <[email protected]>:
iWeb Site import to DW - livemode problem
created by Nancy O. in Dreamweaver support forum - View the full discussion
There's nothing pretty about the code iWeb generates. It's a sea of <div> tags and inline styles that expert coders would find difficult to work with. So yes. Re-building your site in DW with an external CSS file is an excellent idea .
Start with this 5-part tutorial:
Creating your first web site in DW CC -
https://helpx.adobe.com/dreamweaver/learn/tutorials/how-to/first-website-part1.html
Nancy O.
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6899368#6899368
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Dreamweaver support forum by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

Import settings not saved

I'm running iTunes 4.9.0.17 loaded from the disc that came with my Nano and have used all its functionality with no trouble until now. (I reverted to this previous version due to import problems with 6.0). I can change the import settings, but the changes won't stick after exiting the window. When I reopen Preferences and check the Import settings, they always revert back to the default High Quality (160kbps) setting. My drivers and firmware are up to date. I've made no changes to my hardware or software configurations. I have very little hair left after trying to figure this out, so any help is greatly appreciated. A more detailed system configuration is available, if it will help.

Check out this post from Otto42. It deals with EQ presets, but I have a strong suspicion that your Import settings are in the same file.
Otto42, "Lost equalizer presets" #11, 01:19am Nov 2, 2005 CDT

The Video check box in the Import Settings is greyed out, what have I done?

I am using a Sony Handycam HDR-SR5E with final cut pro (v7.0l). When logging and transferring my recent files I found i only imported the sound. So returning to the log and transfer window, and checking on the import settings i notice the check boxes are grayed out and the video box is unchecked.
I have no idea what I have done, some of the files will allow me to import video, but the files i really need won't. Just retested the camera and the file i just recorded will allow me to import the video. Any ideas, i want to avoid making the same mistake again and ideally would like to get the video out of the camera.

Deleting FCP Preferences:
Open a Finder window. Set the view mode to columns:
Click the house icon that has your name next to it.
Click the folder "Library" in the next column.
Find and click the folder "Preferences" in the next column.
Find and click the folder "Final Cut Pro User Data" in the next column.
Move the files "Final Cut Pro 6.0 Prefs", "Final Cut Pro Obj Cache" and "Final Cut Pro Prof Cache" to the Trash and empty it.
When you have a stable set of preference files, download [Preference Manager|http://www.digitalrebellion.com/pref_man.htm] to back them up.

High Quality Import settings not working

Hi,
Running iTunes 6.0.4 for Windows and have completely removed and reinstalled it to try to resolve this problem.
When I go to the Importing preferences and I try to selet a "Custom..." bit rate....it always defaults back to 128kpbs. I've tried setting the AAC encoder to 192kpbs as well as the MP3 encoder. As soon as I go back into preferences, they have defaulted to 160kpbs.
What's going on here? Why won't iTunes let me use the higher bit rate settings?

hi Audiophilia!
this is sometimes caused by a corrupt itunes preferences file. folks can often get their custom import settings to stick by rebuilding their preferences file. (make a note of any custom settings you have though ... the rebuild will set all preferences back to their defaults.)
although it's about a different issue, the preferences file rebuild technique is given in this User Tip:
Scott P: My source list is missing
love, b

Cannot Change Custom Import Settings For AAC's

Last night I changed the custom import settings from 192 kbps to 160 kbps for a particular mp3 album I wanted to convert with that bitrate. I tried to change the custom settings back to 192 kbps (the bitrate most of my mp3's & wma's are in). For some reason, the window that came up many times before refuses to pop up now. I tried the custom settings for mp3's and that window still pops up. Anyway, I tried a repair and nothing happened. I uninstalled iTunes, Quicktime, Bonjour, and Apple Software Updates, deleted there corresponding folders in C:/Program Files and then restarted the computer. I downloaded the iTunes 9 installer through the iTunes website and proceeded to reinstall iTunes. Still, the problem exists. I'm not sure what else to do? The only other thing I can think of is to do the same except install iTunes 8 instead and then search for updates and reinstall iTunes 9 that way. Would anyone know of any other method on solving my problem? Any help would be greatly appreciated, thanks!

glenn,
I have the same problem and it is driving me crazy. If you find a solution please email me at [email protected]
thanks and good luck

Import Settings, Use error correction

I just read that the "Use error correction when reading Audio CDs" box in iTunes Import Settings should really be on, (even though it's slower).
on this page http://www.kenrockwell.com/apple/itunes.htm It's copyright 2006
Is this really the case?

Hi
An up for this topic.
Always the same question : use correction or not.
Nobody knows today how this function works (except Apple may be...)
When error correct is off : in case of problem, Is the player works like a cd player, creating a /making a new information or does he pass many times until having the good information.
When error correction is on : In case of problem what happend ? does he pass many times (thats why its slower...) until having the good information ?
The way is having bit perfect at the end even it is long...
An idea ?

Import settings pop up menu resize handle missing

In the import window the pop up menu for import settings has the right side blocked and there is no way to resize it.

Do you mean this menu?
What do you mean by "right side blocked"? Is it off the screen?
If that is the case, it might be a problem of corrupted user preferences.
Remove the Aperture's user preferences from the User Library as described here:
Aperture 3: Troubleshooting Basics http://support.apple.com/kb/HT3805
Note:Your User Library is hidden by default in 10.7.x or later - to open it in a Finder window use the "Go" menu from the Finder's main menu bar.
Quit Aperture, if it is running. Log off and on again.
Open the user library by using the Finder's "Go > Go to Folder" menu and hold down the options-key, until "Library" appears in the drop down menu. Select it.
In the widow that will open, scroll down to "Preferences"
From the "Preferences" folder remove "com.apple.Aperture.plist".
Then try to launch Aperture again.
But deleting the "Preferences" file will cause Aperture to forget the preferences settings. Be prepared to have to reset all options you set using the Aperture Preferences panel.
Regards
Léonie

E 63 Youtube viewing problem

E 63 Youtube viewing problem.
When i click on the youtube movie clips first Real Player opens for a second and then it shows
First tries to connect.
"Unable to connect" after that it shows
"Rtsp Temp" not saved. Save now? and gives a Yes and No option.
If you press Yes , it shows saves to Galary
If you open the Galary u will find the file is saved in Galary Stream links.
When u try to open it, it says Define defaulat access point and stops.
Please let me know how to solve this.
Regards,
Chritopher

i had this on my phone
try this
go to menu > media > real player > options > settings > streaming > network > default access point
change it to the access point u would use to connect to the internet
u will have to keep changing this option if u plan to use different wlan connections
if my post helped u out, please click the Star next to it to add some KUDOS to my name

Import oracle.adf.view.rich.event.DropEvent; Not Found

Ok guys I have a problem. A large number of my imports are not found when I type them into my project. I am following a book and there is no mention of this happening so I have no idea what to do. I figure maybe it is about finding libraries and adding them to my view controller but I am not sure what libraries I should add.
These are the things that are missing
import oracle.adf.view.rich.datatransfer.DataFlavor;
import oracle.adf.view.rich.datatransfer.Transferable;
import oracle.adf.view.rich.dnd.DnDAction;
import oracle.adf.view.rich.event.DropEvent;
import oracle.adfinternal.view.faces.model.binding.FacesCtrlHierNodeBinding;
import org.apache.myfaces.trinidad.model.CollectionModel;
import org.apache.myfaces.trinidad.model.RowKeySet;
I am hoping that someone out there can help me with this problem

Here is a listing of all of the packages missing since this happened. Keep in mind Ive been using some of these packages with no problems for a while. Dunno what happened. Also I left out the corresponding errors that I'm pretty sure appeared because of this but if anyone needs a full error list I can post it no problem.
Error(6,29): package oracle.adf.controller does not exist
Error(6,41): package oracle.adf.view.rich.datatransfer does not exist
Error(7,41): package oracle.adf.view.rich.datatransfer does not exist
Error(8,32): package oracle.adf.view.rich.dnd does not exist
Error(9,34): package oracle.adf.view.rich.event does not exist
Error(11,51): package oracle.adfinternal.view.faces.model.binding does not exist
Error(17,41): package org.apache.myfaces.trinidad.model does not exist
Error(18,41): package org.apache.myfaces.trinidad.model does not exist
Error(3,29): package javax.faces.component does not exist
Error(4,27): package javax.faces.context does not exist
Error(5,27): package javax.faces.convert does not exist
Error(11,27): package javax.faces.context does not exist
Error(12,25): package javax.faces.event does not exist
Error(16,36): package oracle.adf.view.rich.context does not exist
Error(22,41): package org.apache.myfaces.trinidad.model does not exist
Error(3,29): package oracle.adf.controller does not exist
Error(6,43): package oracle.adf.view.rich.component.rich does not exist
Error(7,52): package oracle.adf.view.rich.component.rich.fragment does not exist
Error(8,34): package oracle.adf.view.rich.event does not exist
Error(15,29): package javax.faces.component does not exist
Error(16,27): package javax.faces.context does not exist
Error(18,35): package oracle.adf.view.rich.render does not exist
Error(20,42): package org.apache.myfaces.trinidad.render does not exist
Error(21,40): package org.apache.myfaces.trinidad.util does not exist
I sincerely hope someone can help me out of this mess

Log & Transfer Question - Import Settings

Is there any way to save my import settings in Log & Transfer (FCP7)? Every clip I import goes back to the default of 4 audio channels...and I don't want all four channels. Aside from manually changing the audio setting for each clip in the batch, is there a way to save a my audio setting for the entire batch of clips?
Thanks.

while you may not be able to save a setting, you can apply a change to all clips in the L&T bin.
In the bin, highlight the clips you want to have the same settings then, in the viewer window in Log & Transfer, select the settings tab, make the changes to the audio then apply to all.
x

Import Settings or Viewing Problem

Similar Messages

Maybe you are looking for