Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

I would like to know if there is SCSM 2012 SP1 MP available for SCOM 2007 R2 ?
I downloaded the "System Center Monitoring Pack for System Center 2012 - Service Manager" MP from
http://www.microsoft.com/en-us/download/details.aspx?id=29980 and then import into SCOM 2007 R2, however, I found that there are some MP dependencies issue.
For example, the "Microsoft System Center Service Manager Library" MP requires "Microsoft SystemCenter Library" and "System.Health.Library" MPs of version 7.0.8427.0. Howerver, the "Microsoft SystemCenter Library"
and "System.Health.Library" MP in SCOM 2007 R2 is of version 6.1.7221.0

Import Management Pack from DVD disk SCOM 2012 R2
SW_DVD5_Sys_Ctr_2012_R2_English_OpsMgr_MLF_X19-18307.ISO\ManagementPacks
Have a nice day !!!

Similar Messages

SCEP 2012 System Center Monitoring Pack for Linux v4.5.10.1 Problem

Hi Everyone!
We are having a problem with OpsMgr 2012 R2 and the System Center Monitoring Pack for SCEP 2012 for Linux v4.5.10.1. We have successfully deployed the Linux OpsMgr 2012 R2 agent to our test CentOS 6.5 VM as well as SCEP 2012 v4.5.10.1. We have
imported the System Center Monitoring Pack for SCEP 2012 for Linux management packs into OpsMgr 2012 R2 which is successfully discovering SCEP on our Linux VM, but when looking at the details for the monitor, it indicates that SCEP is "not found"
as seen in the following screen shot...
As seen in the following screen shots, everything else seems to be installed, configured, and working properly...
Any assistance or guidance would be greatly appreciated!
Regards,
JJ

Magnus_001 (big ups) and I were able to get discovery to stop failing on the Linux side of things, but the SCOM MP is still highly problematic. Their pdf guides for SCEP implementation on Linux has a bunch of typos and errors -- for example, listing
'/bin/sh' instead of '/bin/bash', and one of the lines (the one that includes "export LANG=C" won't run no matter what. When we disassembled the SCOM MP, we found that there's an extraneous space at the end of the command, current thought is
that that's causing a regex to fail within sudo. All of their commands, from what I can tell, need to be specified as NOPASSWD within sudo; if you see errors about ssh-askpass with that you can confirm that there are likely typos in their guide sourced
from the pdf. We eventually allowed '/bin/bash' to get the programs to run since we couldn't get a regex match to catch their command (which should be in a script). We are out of failures that we can discover with logging on the Linux side; it's
likely to be an error within the MP at this point.
When we look at the powershell script in the MP library, the "not found" error is the default state, set immediately after stdout is captured from the discovery script. I'm guessing that there's some problem interaction between that script
and the parsing thereof, as when we run the script locally as root we see the output that we'd expect. For all I know that's a line ending or locale problem.
Troubleshooting on the linux end is problematic, as instead of distributing a script to check on the linux side (which makes the sudo part of things much easier), the script is hard-coded within the MP. From what I understand it would need to be disassembled
and recompiled to change.
The snippet below may be of use to someone for use in their sudoers file, it will make the checks work on the linux side at least. I wouldn't recommend this for anything beyond testing, as specifying that an account can run a full bash shell as root
without a password is a terrible idea.
#replace scomactionaccount with whatever your scom action account is called
User_Alias SCOM = scomactionaccount
Runas_Alias SCOM = root
SCOM ALL = (SCOM) NOPASSWD: /opt/microsoft/scx/bin/scxlogfilereader -p
SCOM ALL = (SCOM) NOPASSWD: /bin/bash

UCS Management Pack for System Center 2012 OpsMgr add monitor wizard error

We're successfully using the 2.6.0.179 version of the UCS Management Pack for System Center 2012 Operations Manager in our 2012 SP1 OpsMgr environment; however, in the new 2012 R2 OpsMgr environment we've stood-up and in which we installed the 2.6.2.0 version of the UCS MP, we're getting an error when trying to run the Add Monitoring Wizard under the Management Pack Templates node of the Authoring pane. We get the same error from the 2.6.1.0 version of the UCS MP as well. The text of the error is as follows:
"The page [Cisco.UCS.MP.UI.Proxy.Template.Page.ProxyDetailsPage] in the assembly [Cisco.UCS.MP.UI.Culture="",PublicKeyToken="6c96076cdf2c87a",Version="2.6.0.0"] could not be loaded. Please make sure that the account you are running under has sufficient privileges to load the given assembly, or the management pack that defines this page is installed or the assembly containing the page is in the path of the executible or that the page derives from known Operations Manager page type."
I'm an admin user in OpsMgr, so this should not be a user privilege issue, and that leaves the MP itself. The fact that a 2.6.0.0 version is mentioned makes me wonder if the base version of the MP must be installed before the 2.6.2 version. I'd test this, but we no longer have that version, and its no longer available for download from Cisco that I can see.
Has any dealt with this issue successfully, or have any insight into the problem?

Solved...the requirement is that you must do the MP configuration from the SCOM console on the SCOM Management Server where you installed the Cisco UCS MP; you can't do it from a SCOM console on a remote computer like I was trying to do.

Error while reading ID of own business system from the SLD for system DPI

Hi All,
My sceanrio is Proxy to JDBC. and its B2B. am sending the data from BI system and based on the country field from the source, table is decided and value is updated in the table.
In RWB->Component Monitoring->Adapter Engine->Test Message, I have given the Sender component,Receiver Party,Receiver component,Interface,Interface Namespace,userid and password,Quality of Service and pasted the payload.
Now I am getting the error :Error While Sending Message: Error stack from response: Error while reading ID of own business system from the SLD for system DPI and client 001 Internal error in Landscape Directory
Please help me out.
Thanks
Kiruthi
Edited by: kiruthiga balusamy on Nov 24, 2009 4:02 PM

Hi,
Check transaction SLDAPICUST for correct SLD configuration.
http://help.sap.com/saphelp_nw70/helpdata/EN/0b/8512417301ee6fe10000000a1550b0/content.htm
~Sanv...

Error while reading the ID of own business system from the SLD for system

Hello,
I try to send master material data from a 4.7 system via XI 3.0 to an autoID Infrastructure system 2.1. All Communication Channels, Receiver Agreements, Receiver and Interface Agreements are configured. The IDOC gets propper into the XI, Inbound Message is "green". Now, I get the following message:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>ZTA</SAP:P1>
<SAP:P2>013</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading the ID of own business system from the SLD for system ZTA and client 013</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can anybody help me?

Probably, its due to incorrect RFC Adapter properties in config.
Go to Integration COnfiguration. Double Click on the Business System for your R/3 system. On the right hand screen, Click on Service-->Adapter Specific Parameters.
Check whether the Logical System Name comes up as SAP<SID> and whether R/3 system ID and Client are appropriate.
If these values are inappropriate, make changes to the corresponding Technical System defined in the SLD. After you have made the necessary corrections, come back to Integration COnfiguration, Double click on Business SYstem for R/3. Switch to Edit Mode. Click on Service-> Adapter Specific Parameters and then click on the Icon between Apply and Cancel buttons, inorder to compare with SLD and make those values reflect in config. Then click on Apply and Save the Business System.
After this, you can retry sending the message.
Rgds
R Chandrasekhar

Error while reading ID of own business system from the SLD for system D18

Dear guru's,
I have almost completed a file2proxy scenario but I'm stuk on the following.
When sending a message the outbound adapter says:
<b>Error while reading ID of own business system from the SLD for system D18 and client 200</b>
What's the problem? I'm using a HTTP connection in the comm. channel. In this http connection a user with SAP_ALL is defined.
Any suggestions?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SLD_NO_OWN_BS</SAP:Code>
<SAP:P1>D18</SAP:P1>
<SAP:P2>200</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error while reading ID of own business system from the SLD for system D18 and client 200</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Login to system D18 and client 200 and check the TC SLDCHECK and also as per my pervious message check the entries in the SLDAPICUST, it should point to the Server on which SLD is present usually XI server https.
Actually what happens in this error is when you are done with the configuration part in the ID, you are trying to eceute the scenario File to proxy, when it comes to identify the receiver system which is D18 clnt 200, it goes to SLD to check it and SLD is trying to ping to the machine D18 this connection is set from the TC SLDAPICUST on the machine D18.
here the problem is that either the D18 is not able to ping to the SLD and also try refreshing the SLD cache.
Hope you problem is fixed

Cannot keep Server up and running. Shutdown requested by OVM. The system is going down for system halt NOW!

I have OVS 3.x.x and OVM 3.x.x running on the same physical server. I had some issues trying to configure storage via OVM and I issued a shutdown (I think) from the OVM Web Interface. Now I am unable to keep the server up and running. Everytime I turn on the server, after Oracle VM Manager starts, it shuts down the server automatically within a minute or two after startup.
I am able to login to the server via Putty and stop ovmm service manually. When Oracle VM Manager service is stopped, (SERVICE OVMM STOP) the server does not shutdown automatically. However as soon as I restart the OVMM service, it shuts down the server with message...
Shutdown requested by OVM. The system is going down for system halt NOW!
How do I find out what is causing OVM to issue the shutdown command and edit and fix via command line?

Since your server was continually rebooting, do you remember if you issued a shutdown or reboot from OVM web interface? Mine was just shutting down. Have you tried to use the Oracle Virtual Manage Web Interface to either reboot or shutdown the server after your upgrade to 3.2.4? FYI I do not have support. This is my sandbox.
user5728486 wrote:
After a week or so without a resolution from support, I noticed ....
Are you saying that even paying for Oracle Support, they did not resolve this issue?

Trusted system entry already exists for system SOL

Hi,
Im trying to add a second trusted system with smt1 transaction but the thing is that i've already have an identical SID for another system so i get the "Trusted system entry already exists for system SOL" message.
is there any way to solve this??
thanks in advance.
regards.

In SM59 - in the RFC in question - Press "Technical Settings" tab - then press "Yes" to Load Balancing - this will populate the "Target Host" field.
Then make sure that you here enter the system data for the Target System (Default it will display the Host System data which you will need to replace)
Then go back to SMT1 - Press the "Create" button - and in the Wizard you enter the RFC connection as before... Now it should work.
Regards,
Lars

SQL Server 2012 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack 2 - why only for x86 ?

Hey guys...
Im a little bit confused... i wanted to download the newest hotfixes for SQL server 2012...
But the download for :
2983175 Cumulative update package 2 (CU2) for SQL Server 2012 Service Pack
is only for the platform: x86 available ... but my SQL server 2012 is running in a x64 environment...
(when i checked the older cumulative updates... they're all only for x86.. can someone tell me why ? )
thanks and regards,
Dominic

There doesn't exist an SQL Express "Standard". It's two different editions.
For Express there are three 32bit/64bit editions:
Express, Express with Tools and Express with Advanced Services.
Express with Tools is essentially Express with Management Studio Tools, Express with Advanced Services adds also BI (Business Intelligence) + Reporting Services.
As for where you can apply the cumulative update, on the link you can see this:
Microsoft SQL Server 2012 Service Pack 2, when used with:
Microsoft SQL Server 2012 Analysis Services
Microsoft SQL Server 2012 Developer
Microsoft SQL Server 2012 Enterprise
Microsoft SQL Server 2012 Express
Microsoft SQL Server 2012 Business Intelligence
Microsoft SQL Server 2012 Standard
Microsoft SQL Server 2012 Web
"If there's nothing wrong with me, maybe there's something wrong with the universe!"

Upgrading SC 2012 Service Manager SP1 to System Center 2012 R2 - ERROR

Hi all
Problems when upgrade from Service Manager in Microsoft System Center 2012 Service Pack 1 (SP1) to Service Manager in System Center 2012 R2 in test lab.
I have two servers:
SM - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2
DW - Windows 2012, SQL 2012 SP1, SCSM 2012 SP1 CU2.
I successfully installed SCSM 2012 R2 on both servers.
After restart data warehouse jobs receive error in Operation Manager log on DW.
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:48
Event ID:      33503
Task Category: None
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
An error countered while attempting to execute ETL Module:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Stack:    at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader()
   at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
   at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Data Warehouse" />
    <EventID Qualifiers="32768">33503</EventID>
    <Level>3</Level>
    <Task>0</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2013-10-18T14:15:48.000000000Z" />
    <EventRecordID>13089</EventRecordID>
    <Channel>Operations Manager</Channel>
    <Computer>DW2012.contoso.loc</Computer>
    <Security />
</System>
<EventData>
    <Data>Transform</Data>
    <Data>22989</Data>
    <Data>TransformEntityRelatesToEntityFact</Data>
    <Data>UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.</Data>
    <Data>   at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
   at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
   at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData()
   at System.Data.SqlClient.SqlDataReader.get_MetaData()
   at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
   at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
   at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior behavior, String method)
   at System.Data.SqlClient.SqlCommand.ExecuteReader()
   at Microsoft.SystemCenter.Warehouse.Utility.SqlHelper.ExecuteReader(SqlConnection sqlCon, CommandType cmdType, String cmdText, SqlParameter[] parameters)
   at Microsoft.SystemCenter.Warehouse.Etl.StoredProcedure.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser, Int32 batchSize)
   at Microsoft.SystemCenter.Warehouse.Etl.TransformModule.Execute(IXPathNavigable config, Watermark wm, DomainUser sourceConnectionUser, DomainUser destinationConnectionUser)
   at Microsoft.SystemCenter.Etl.ETLModule.OnDataItem(DataItemBase dataItem, DataItemAcknowledgementCallback acknowledgedCallback, Object acknowledgedState, DataItemProcessingCompleteCallback completionCallback, Object completionState)</Data>
</EventData>
</Event>
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:49
Event ID:      33502
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityRelatesToEntityFact
Message: UNION ALL view 'DWRepository.dbo.EntityRelatesToEntityFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityRelatesToEntityFact_2013_May]'.
Log Name:      Operations Manager
Source:        Data Warehouse
Date:          18.10.2013 20:15:49
Event ID:      33502
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      DW2012.contoso.loc
Description:
ETL Module Execution failed:
ETL process type: Transform
Batch ID: 22989
Module name: TransformEntityManagedTypeFact
Message: UNION ALL view 'DWRepository.dbo.EntityManagedTypeFactvw' is not updatable because a primary key was not found on table '[DWRepository].[dbo].[EntityManagedTypeFact_2013_May]'.
How to fix this error?

For anyone else, you may need to reset any failed jobs statusid back to 3 after you run the script from
http://technet.microsoft.com/en-us/library/dn299381.aspx (first
issue)
and after that run your jobs in correct order.
I had to reset the statusid for DWMaintenence and common.load.
Aengus

Runbook for decommission vm from service manager end portal

Hi,
I have created runbook for provision vm in VMware and it is working fine from service manager self service portal...
Now my next requirement is end user should be able delete the vm which he provisioned from the portal....
So, I have created one simple work flow for delete VM and only vm name is the input parameter...
Now when create the request offering user should get the list of vms which he provisioned...How can I get the list of vms in request offering?
Thanks in advance for your help...
Regards,
Sudheesh M A

Hi,
This blog post show you query based list
http://blogs.technet.com/b/servicemanager/archive/2011/11/08/request-offering-wizard-overview.aspx and this
http://www.buchatech.com/2013/11/service-manager-request-offering-multiselect-user-prompt/
First you need to make sure you have the machines in Service Manager CMDB. If it is domain joined servers they should be in the CMDB, from the Active Directory connector. Then you need to have a way to filter out which machines to show for a user. When a
end user browse to the SCSM portal you can access the username from the service offering by a varaible named Token Portal User Name. The Token: Portal User Name is in format CONTOSO\leni (DOMAIN\username)
You can use it to filter which servers to show, if you add DOMAIN\username on a attribut on each server. For example if you add the owner of the VM to each server, in format DOMAIN\username you can then configure the query based list to show list all servers
were the notes field or owners field is equal to Token Portal User Name.
Once you have all servers in the CMDB and servers has owner in correct format you can start thinking about new runbooks.
Anders Bengtsson | Microsoft PFE | blog at http://www.contoso.se

Cisco UCS Management Pack for System Center Operations Manager 2007 R2 Login Error

I have Cisco UCS 1.4 (3q) and just installed the MP v2.1 for Cisco UCS, however when I click on the "Management Pack Events" alert view in the SCOM console, there are error for event number 19900. The description of the error is as follows:
Description:
CISCO UCS R2 MP (https://10.x.x.x/nuova) [CISCO.UCS.R2.Proxy.LoadCache.ProbeAction.vbs] : CISCO UCS Login Error: Authentication failed (Code: 551)
I noticed that it's looking for the /nuova directory, but in order to login to our UCS environment, we usually just go to the IP address - so I'm wondering if that has something to do with it? I've verified that when going directly to the IP from Internet Explorer I can login using the opsmgr credentials we specifically created for this account. I've also gone through the process of creating a run-as account on the SCOM side and associated it with the correct profiles.
Any help is greatly appreciated.

Troubleshooting has found out its user error, wrong password configured.

Active Directory Domain Services(2012 R2) Management Pack for System Center 2012

Hi
I went to the Microsoft site and not able to find the ADDS 2012 R2 mp for SCOM 2012 R2. It looked strange to me
I went to the http://www.microsoft.com/en-us/download/details.aspx?id=21357 site and extracted the file and file contains the mp file for 2003 and 2008.Is something i am missing or someone can share the download link for ADDS 2012 R2 mp?
Donald D'souza (http://donald-scom.blogspot.com/)

This is the one for AD 2012.
Regards, Blake Email: mengotto<at>hotmail.com Blog: http://discussitnow.wordpress.com/ If my response was helpful, please mark it as so, if it answered your question, then please also mark it accordingly. Thank you.

Error while reading ID of own business system from the SLD for system

Dear all,
We running on a SAP PI 7.1 enhancement pack 1.I know that there some threads about this subject, but unfortunately all suggestions found so far didn't solve my problem:
- SLDCHECK reports no errors
- SLAPICUST: pointing to the SLD
- SXI_CACHE with full refresh: no result.
Does anyone have a clue for me?
Kind regards,
John.

I hope you are facing this prolem with one particular Business System.. Since you have checked all the points and still facing this issue then try below options..
1. First try to clear full SLD cache and then test.
2. If cache doesn't solve the issue then delete the Business System from SLD and Integration Directory first then re-create the BS in SLD and "Clear SLD Data Cache" from "Environment" menu in Integration Directory and then import the Business System and test your scenario.

How to assign a system to a solution for EWA in SAP Solution Manager 7.1 Solman 7.1

Hello Dear experts,
I am trying to create and generate an EWA Early Watch report, I am configuring a Solution Manager 7.1 since scratch and now I am in the Managed System configuration - Early Watch Alert Management.
I know that in order to get the report the system have to appear in the systems and it has to be assigned to a solution but there is not appearing..
Maybe there is some step that I missed and I have to configure but I don't know which one.
Below you can find screenshot of my issue.
I appreciate your help,
Thank You
Javier Tenorio

Hi Javier,
Please follow the below steps to create solution and assigned to systems.
First assigned the logical system properly.
Execute transaction "SOLMAN_WORKCENTER", click on the tab "Solution Manager Administration", and click on "Solutions" on the left of the screen. In the "Solutions" tab, click on the "New" button to create a new solution.
A window will show up. Enter a name for the solution and select a language and click on "Save Solution"
assigned the system to solution which you have created.
Hope this will solve your problem.
Regards,
Gurpal

Import System Center Monitoring Pack for System Center 2012 - Service Manager into SCOM 2007 R2

Similar Messages

Maybe you are looking for