Import TR RD1K903861 into system contain RD1K903861 related to other area

Dears,
I have the following situation I have two Separate ECC environments old and new
new one built as a system copy from old one (old Prod)
the old landscape is RD1, RQ1, RP1.
and the new also is RD1,RQ1,RP1.
SP stack level in old  < SP in the new.
configuration/customization was opened in both old DEV and New DEV. So some configuration done in old DEV and need to be copied to new DEV. and also new lanscape contains new customizing not exit in old.
now I want to import some TR's from the old DEV into new DEV. using add to buffer command.
but we facing problem the transport numbers which needed to be imported into the new DEV already exit with different configuration.
Example. I want to import TR  (RD1K903861  FI settings) from old DEV (RD1) into new dev with same SID and contains one transport with same TR number (RD1K903861  MM settings).
as you can see, the same TR exist in both .
How can I do that?
FYI: this is not only for one or two TRs I have to do it for almost 150 TRs need to be imported.
Please Advice.
OS4SE

> Example. I want to import TR  (RD1K903861  FI settings) from old DEV (RD1) into new dev with same SID and contains one transport with same TR number (RD1K903861  MM settings).
> as you can see, the same TR exist in both .
That's not good.
> How can I do that?
> FYI: this is not only for one or two TRs I have to do it for almost 150 TRs need to be imported.
If you have transport requests with the same numbers and SIDs there's nothing you can do to distinguish them from each other.
Markus

Similar Messages

  • Error on Importing Word document into RH7

    I am attempting to import Word docs into RoboHelp7.  The first several documents are imported and saved into the project without incident. However, one file causes an error: "An error occurred while trying to save data to : <RH project name> <5>.  The same error occurs each time I attempt to import this particular file; the error message will not disappear when I click on OK and whole project has to be closed.  Thank you.

    Colum,
    Thank you for your prompt response.  I tried importing sections of the word document as you suggested, but I was not able to isolate the error. I confess that after repeated errors and shutdowns, I discontinued this troubleshooting, lest it cause any damage to the original project files.
    Instead, I opened a new project, and imported the Word doc into that project.   Then I imported these HTML files into my main project. It was not graceful, but the end result is good, with all the links and formatting preserved.
    As other Word docs have since been imported into this project without incident, perhaps it was a fluke/bug in this one document.
    I appreciate your help in resolving the situation.
    Thank you.
    Mary Lyons
    Knowledge Manager
    Phone: 309.751.6179
    This e-mail and any attachments may contain privileged and/or confidential information. This e-mail is intended solely for the use of the intended recipient. If you are not the intended recipient, you are hereby notified that any copying, distribution, dissemination or action taken in relation to the contents of this e-mail and any of its attachments is strictly prohibited and may be unlawful. If you have received this e-mail in error, please notify the sender immediately and permanently delete the original e-mail and any attachments and destroy any copies.

  • Import a video into the mediathek

    I got a DVD from a friend with a video on it. This video has been taken by himself with his own video camera. Now I would like to import this video into the mediathek of iMovie. What are the correct steps that it will work properly.

    See my post here.
    https://discussions.apple.com/docs/DOC-3951

  • Import a gui into a normal class

    ok well i am working on a project and for purposes of structured programming i am being asked by my people to import the gui into another class and in that other class i am supposed to define the event handler methods of my gui. i've never seen anything like it so could someone please show me an example plz
    import GUI.gui;
    // theotherclass.class
    gui mygui = new gui();
    // now how do i define the event handler functions for mygui from here?
    // is that even possible ?
    thanks for your help

    you cannot import gui . u can only make instance of GUI class the separation between GUI and another tasks it important , like in your case .
    suppose you have Applet
    public class WhiteBoard extends JApplet which has JButton and another components , ( static member )
    and has an instance of GUI class
    ShapeCanvas sc=new ShapeCanvas();
    public class ShapeCanvas extends JPanel
                         implements ItemListener,ActionListener, MouseListener, MouseMotionListenerand every JButton component ( in applet class ) has an addActionListener for this instance , or you can in GUI Class to call static members in Applet class and addActionListener(this) for them

  • Importing home recorded DVD footage not working. File names are grayed out.

    I converted a VHS tape to a DVD with a machine my cousin owns. It all plays fine in DVD Player but I can't import the files into iMovie 09. All the filenames are grayed out in the import dialogue box.
    How can I make it work?
    Thanks in advance!
    I have a "VIDEO_RM" folder with (.BUP, .IFO, .VOB, BUP, .IFO, VOB,files)
    Also hav"VIDEO_TS" folder with the same types of files.... none of the files are importable into iMovie 09 and none of them seem to work inside quicktime. But they do play in my VLC player.

    Thanks a lot! I will try this as soon as I can. Sorry for not finding this for myself. I did a discussion search on the subject, but not as thorough as I should of I guess.

  • Importing Word doc into Previously Existing Project Corrupts Related Topics

    Hi,
    I had a few extra topics that I documented in a Word document
    and imported that document into an existing HTML Help project in
    RoboHelp. After doing this, it used the CSS file called by the new
    folder it added for those new topics (based on the name of the
    imported word doc) and when I look at topics in WYSIWIG, the text
    on them is Design_Time Con. (I used the text only style of related
    topics). When I select the related topic button in WYSIWIG and view
    the popup, the menu choice for properties is deactivated so I can't
    even edit the topics in them. And, when I try to add a new related
    topic, it looks the same "corrupted" way.
    What am I going to do? Is there are project setting that is
    pointing to the wrong directory? What can I do to save my related
    topics. I have over 400 topics all with related topics buttons and
    each has an average of 6-8 related topics listed.

    P.S. I also tried creating a new project and importing the
    htm files into it but it is doing the same thing.
    Here is the code for the Related Topics in one of the topics
    as a sample:
    <!--Metadata type="DesignerControl" startspan
    <object
    CLASSID="clsid:FF80F713-5DC6-11d0-A7B4-00AADC53E937"
    ID=RelatedTopics
    BORDER=0>
    <param name="_Version" value="65536" >
    <param name="_ExtentX" value="2117" >
    <param name="_ExtentY" value="556" >
    <param name="_StockProps" value="13" >
    <param name="ForeColor" value="0" >
    <param name="BackColor" value="14215660" >
    <param name="UseButton" value="0" >
    <param name="UseText" value="-1" >
    <param name="ControlLabel" value="Related Topics" >
    <param name="UseIcon" value="0" >
    <param name="Items" value="About the Main Work Pick
    Window;About_the_Main_Work_Pick_Window.htm$$**$$About the Picking
    Employees Grid;About_the_Picking_Employees_Grid.htm$$**$$Adding a
    Part-Time Employee
    Pick;Adding_a_Part_Time_Employee_Pick.htm$$**$$Adding a Work
    Pick;Adding_a_Work_Pick.htm$$**$$Changing the Employee Pick
    Order;Changing_the_Employee_Pick_Order.htm$$**$$Choosing the List
    of Picking
    Employees;Choosing_the_List_of_Picking_Employees.htm$$**$$Defining
    the Main Pick
    Information;Defining_the_Main_Pick_Information.htm$$**$$Pick Status
    Codes;Pick_Status_Codes.htm$$**$$Picking Extra
    Work;Picking_Extra_Work.htm$$**$$Picking Special
    Days;Picking_Special_Days.htm$$**$$Reviewing Master List
    Positions;Reviewing_Master_List_Positions.htm$$**$$Saving the
    Pick;Saving_the_Pick.htm$$**$$Selecting an Employee and Beginning
    the
    Pick;Selecting_an_Employee_and_Beginning_the_Pick.htm$$**$$Selecting
    Imported Rosters;Selecting_Imported_Rosters.htm$$**$$" >
    <param name="Image" value="" >
    <param name="FontInfo" value="Arial,8,0,," >
    <param name="_CURRENTFILEPATH"
    value="\\cronos\Usr\kwatson\Operations Guide\TeleDriver Operations
    Guide Draft 1 for Import into Help\Adding_an_Extraboard_Pick.htm"
    >
    <param name="_ID" value="RelatedTopics" >
    <param name="UseMenu" value="-1" >
    <param name="Frame" value="" >
    <param name="Window" value="" >
    </object>--><OBJECT
    CLASSID="clsid:ADB880A6-D8FF-11CF-9377-00AA003B7A11"
    ID="RelatedTopics" TYPE="application/x-oleobject" >
    <PARAM NAME="Command" VALUE="Related Topics,MENU">
    <PARAM NAME="Font" VALUE="Arial,8,0,,">
    <PARAM NAME="Item1" VALUE="About the Main Work Pick
    Window;About_the_Main_Work_Pick_Window.htm">
    <PARAM NAME="Item2" VALUE="About the Picking Employees
    Grid;About_the_Picking_Employees_Grid.htm">
    <PARAM NAME="Item3" VALUE="Adding a Part-Time Employee
    Pick;Adding_a_Part_Time_Employee_Pick.htm">
    <PARAM NAME="Item4" VALUE="Adding a Work
    Pick;Adding_a_Work_Pick.htm">
    <PARAM NAME="Item5" VALUE="Changing the Employee Pick
    Order;Changing_the_Employee_Pick_Order.htm">
    <PARAM NAME="Item6" VALUE="Choosing the List of Picking
    Employees;Choosing_the_List_of_Picking_Employees.htm">
    <PARAM NAME="Item7" VALUE="Defining the Main Pick
    Information;Defining_the_Main_Pick_Information.htm">
    <PARAM NAME="Item8" VALUE="Pick Status
    Codes;Pick_Status_Codes.htm">
    <PARAM NAME="Item9" VALUE="Picking Extra
    Work;Picking_Extra_Work.htm">
    <PARAM NAME="Item10" VALUE="Picking Special
    Days;Picking_Special_Days.htm">
    <PARAM NAME="Item11" VALUE="Reviewing Master List
    Positions;Reviewing_Master_List_Positions.htm">
    <PARAM NAME="Item12" VALUE="Saving the
    Pick;Saving_the_Pick.htm">
    <PARAM NAME="Item13" VALUE="Selecting an Employee and
    Beginning the
    Pick;Selecting_an_Employee_and_Beginning_the_Pick.htm">
    <PARAM NAME="Item14" VALUE="Selecting Imported
    Rosters;Selecting_Imported_Rosters.htm">
    <PARAM NAME="Text" VALUE="Text: Related Topics">
    </OBJECT>
    <!--Metadata type="DesignerControl" endspan-->

  • I have been trying to import VHS video into iMovie via a Hollywood Dazzle bridge.  Did not have trouble until I upgraded to mavericks.  I have a mac book pro, 10.9.1, iMovie 10.0.2.  Says it is recording, but when I go to check, it says the file is empty.

    I have been trying import VHS video into iMovie via a Hollywood Dazzle bridge.  I have been successful doing this in the past, but now it is not working.  I have a mac book pro, 10.9.1, (mavericks), iMovie 10.0.2.  Everything in iMovie looks like it is working.  It reads "recording" in the upper left hand corner of the pane while the video is playing.  When I stop the process to check on my clip it says that the file is empty.  The only thing that has changed since I did it successfully is that I upgraded to mavericks from whatever I had previously.  My system is about one year old.  Any suggestions?

    Hey, Clinton,
         Thanks for your help!  I was able to go to iMovie 9.0.9 and import video.  I was still curious as to why it didn't work in version 10.0.2, so I contacted Apple tech support.  They were't sure at first as to why it wouldn't work, so they had me delete iMovie 10.0.2 and then re-install it just to see if something had gone wrong when it upgraded.  That didn't change anything.  In the end, they determined that 10.0.2 doesn't support the Hollywood Dazzle DV bridge.  But I have a workaround path from them that I will share so that it's possible to import to 9.0.9, then move it to 10.0.2. 
         1.  Open iMovie 9 (finder/applications/iMovie 9.0.9
         2.  Import from Dazzle Bridge to iMovie 9, note which event you are importing the clips into
         3.  Close iMovie 9
         4.  Open iMovie 10 (probably in the dock)
         5.  File/Import Media...navigate to home(this was my name, on the left side of iMovie, under Favorites)/Movies/iMovie events.  Find the event folder that contains your Dazzle clips (tip-try sorting by date modified to look at recent events.) 
         6.  Select the clips and import.  Click the blue "Import Selected" button on the bottom right.
    You may get a message that some files cannot be imported.  Click continue import.  It's a little glitchy.  It imports your clip, and also makes a copy of it, too.  On the copy, the audio is normal, but the video is choppy.  In any case, you would delete the copy, anyway.
    Hope this additional information helps somebody else.  Thanks again, Clinton for helping me!

  • Import Russian text into FM 7.1, please advice

    Dear professionals
    From our Russian agent I received some MS-Word documents in the Russian language.
    I wanted to import the Cyrillic text / characters into Framemaker documents to make a structured book.
    But copying and pasting makes Frame only show question marks.
    Selecting an other font did not show anything else.
    What is the simpelest way of making Frame "eat" the Cyrillic MS-Word text and make a proper structured document.
    I read already things about "font mappings", but haven't the faintest "clou" about how to do such a thing.
    Al this on a Win-XP system and Frame version 7.1p116.
    Font Arial CYR and others available in the Paragraph Designer.
    Your advice will be appreciated.
    Regards,
    Wolter

    Wolter,
    You have to transform the text into the Cyrillic codepage. Codepage is a term describing a set of max. 256 characters (encodable with a single byte). With Western Windows we use the codepage 1252, for Cyrillic text codepage 1251 is necessary.
    Without rebooting etc. you may want to proceed like this:
    * Open the document with Word
    * File > Save as Text (there might be two options, we need the option which allows to set the encoding)
    * Select "Windows (Russian)" or something with "1251" from the encoding popup menu. If the document contains any characters that do not fit into this encoding, it will tell you.
    * Save as txt file.
    Now you can import this file into FrameMaker, if asked for an encoding, use Windows — FrameMaker 7.x does not know anything about Cyrillic etc., only when you apply a font like Arial CYR (which is a codepage subset of Arial) the correct glyphs will appear.
    HTH,
    - Michael

  • How to collect JScrollPanes into a Container variable? (urgent...)

    Please help me in following problem:
    I can collect succesfully one JScrollPane into a Container variable allComponents and then show this Container in application window. However, I would like to collect several JScrollPanes into this same Container variable but it does not work. Should I use some kind of add command?
    I tried something like
    allComponents.add(jspane);
    but I got error code "variable allComponents might not have been initialized" allthough I have tried my best to initialize it.
    Thanks for your kind help!
    Snippets from my program:
    class SwingApplication implements ActionListener
    public Container createComponents()
    Container allComponents;
    jspane = new JScrollPane(panel);
    jspane2 = new JScrollPane(cards);
    allComponents = jspane; // THIS WORKS BUT I WOULD LIKE TO COLLECT BOTH jspane AND jspane2 WITH ADD COMMAND
    return allComponents;
    class DragImage
    { public static void main(String[] args)
    JFrame frame = new JFrame("SwingApplication");
    SwingApplication app = new SwingApplication();
    Container contents = app.createComponents();
    frame.getContentPane().add(contents, BorderLayout.CENTER);
    Message was edited by:
    wonderful123

    THanks for your interest!!
    Perhaps I give the whole source code
    The problem lies in the following place:
    allComponents = jspane;
    return allComponents;
    I would like to use some kind of command
    allComponents.add(jspane);
    but it does not seem to work. I get the error "variable allComponents might not be initialized".
    The program should print images in two rows. With my current knowledge i can only print one row of images.
    Thanks!
    import java.awt.*;
        import java.awt.event.*;
        import java.awt.datatransfer.*;
        import javax.swing.*;
    class SwingApplication implements ActionListener
                                            // extends JScrollPane
       private JScrollPane jspane;
       private JScrollPane jspane_n;
       private JPanel panel;
       private JLabel label;
       private Icon icon;
       private JPanel panel2;
       private JLabel label2;
       private Icon icon2;
       private JPanel panel_n;
       private JLabel label_n;
       private Icon icon_n;
       private JTextField testText;
       private int k;
        private static String labelPrefix = "Testing: ";
        private int numClicks = 0;
        final JLabel label_testing = new JLabel(labelPrefix + "nothing");
    JPanel cards; //a panel that uses CardLayout
        final String BUTTONPANEL = "JPanel with JButtons";
        final String TEXTPANEL = "JPanel with JTextField";
       public Container createComponents()
    Container allComponents;
         icon = new ImageIcon("kirjain_a.gif");
         label = new JLabel();
         label.setIcon(icon);
         icon2 = new ImageIcon("kirjain_b.gif");
         label2 = new JLabel();
         label2.setIcon(icon2);
         icon_n = new ImageIcon("numero_1.gif");
         label_n = new JLabel();
         label_n.setIcon(icon_n);
    label.setTransferHandler(new ImageSelection());              
    label2.setTransferHandler(new ImageSelection());
    label_n.setTransferHandler(new ImageSelection());
            MouseListener mouseListener = new MouseAdapter() {
              public void mousePressed(MouseEvent e) {
    JComponent sourceEvent = (JComponent)e.getSource();
    // Object sourceEvent = whatHappened.getSource();
    if (sourceEvent == label)
        { numClicks++;
            label_testing.setText(labelPrefix + numClicks);
    if (sourceEvent == label2)
    numClicks--;
            label_testing.setText(labelPrefix + numClicks);
                JComponent comp = (JComponent)e.getSource();
                TransferHandler handler = comp.getTransferHandler();
                handler.exportAsDrag(comp, e, TransferHandler.COPY);
           label.addMouseListener(mouseListener);
           label2.addMouseListener(mouseListener);  
           label_n.addMouseListener(mouseListener);  
         panel = new JPanel();
    // panel.setLayout(new GridLayout(1,3));
         panel.add(label);
         panel.add(label2);
         panel_n = new JPanel();
         panel_n.add(label_n);
    //Create the panel that contains the "cards".
            cards = new JPanel(new CardLayout());
            cards.add(panel_n, BUTTONPANEL);
            cards.add(panel_n, TEXTPANEL);
         panel.add(label_testing);
          jspane = new JScrollPane(panel);
          jspane_n = new JScrollPane(cards);
      //   jspane.setLayout(new GridLayout(3,2));      
      //   jspane.getViewport().add(panel);
      //   jspane_n.getViewport().add(cards);
      //    allComponents.add(panel, BorderLayout.PAGE_START);
      //    allComponents.add(cards, BorderLayout.CENTER);
      //     allComponents.add(jspane);
      //     allComponents.add(jspane_n);
         allComponents = jspane;
         return allComponents;
                                           //     label.addActionListener(this);
                                           //     k=0;
    public void actionPerformed(ActionEvent whatHappened)
      { Object sourceEvent = whatHappened.getSource();
        if (sourceEvent == label)
        { numClicks++;
            label_testing.setText(labelPrefix + numClicks);
    //    repaint();
    } // end class OwnPanel
    class CloserClass extends WindowAdapter
    { public void windowClosing(WindowEvent e)
       { System.exit(0);
    class DragImage
    { public static void main(String[] args)
           JFrame frame = new JFrame("SwingApplication");
            frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
            SwingApplication app = new SwingApplication();
            Container contents = app.createComponents();
            frame.getContentPane().add(contents, BorderLayout.CENTER);
            //Display the window.
    //    addWindowListener(new CloserClass());
            frame.pack();
            frame.setVisible(true);
        } // end class DragImage

  • Error while Importing .TPZ File into ID

    Hi Experts,
    While Importing the .TPZ File Into Integration Directory , It's Saying that
    <b>Business system INTEGRATION_SERVER_PNW is not assigned to a business system group with the ID (XISystemGroup)</b>
    Please let me Know
    Regards
    Khanna

    Hi,
    First, you have to start the SLD.
    To transport business systems you must first of all create business system groups, then associate the business systems with the group and finally map your business systems.
    To create a group, proceed as follows:
    > Business Systems
    > Click on the drop-down next to Group and select Edit Groups
    > Create a group for each environment (eg DEV, TST, PRD). Specify for each group which Integration Server is used.
    > If the group XISystemGroup (I suspect that this group has been created before via the SLD Administration / Content Maintenance Tool, isn't it?) is already present, just Remove it.
    To assign business systems to a group, proceed as follows:
    > Business Systems (Group = all)
    > Select your Business System
    > Click on the Integration tab.
    > Select the related Integration Server (which is associated with a group - see step 1)
    To map your DEV Business Systems to TST Business Systems etc., proceed as follows:
    > Business Systems
    > Select the group of your choice
    > Select your Business System
    > Click on Transport
    > Click on Add/Change Target
    > Select the Target Group and System
    KR, Danny De Roovere

  • Error while importing MS project into cProject

    Hi
    I am getting the below error while importing MS project client file or XML file into cProjects.
    dpr_shared087
    Logon language becomes original language
    Message no. DPR_SHARED087
    Diagnosis
    The logon language is defined as a possible text language in Customizing for Collaboration Projects under Specify Text Languages. Therefore, it is valid.
    System Response
    The logon language becomes the original language of the new object that was created.
    Kindly suggest what configuration data if any is missing.
    Regards
    Srikrishna

    Hi
    I am getting the below error while importing MS project into cProject.
    Error occurred when importing from Microsoft Project
    Message no. DPR_UI_BSP116
    Diagnosis
    When a project is imported from Microsoft Project, the system generates an XML string during internal processing. A project is then created in cProjects from this string.
    The XML string contains errors because the values from Microsoft Project were transferred without verification.
    Procedure for System Administration
    Notify SAP or call the cProjects application with the "DebugMode=X" query string and carry out the import again.
    The XML string that was generated temporarily is then validated against the cProjects XML schema. The error message from the XML parser is then displayed in the popup.
    Kindly suggest, if the below steps for importing MS project is ok or not?
    step 1: Create project in MS project with tasks.
    step 2: Maintain maping fields of MSP in cProject configurat
    step 3: Import MPP file into cProject using "Import" button.
    step 4: I am getting the above error while importing the MPP file.
    Regards
    Srikrishna

  • Import failed in Con System

    Hello everybody,
    I did some development using the NWDS (JDI installed). After i have checked in my application / activated it and released it it was shown in the import queue at the Consolidation Tab of the CMS application. So far everything worked great, no error what so ever. So i continued to import the application into the Cons system. But it failed. The logs at the detail view says the error occured during the CBS-make step.
    Here is the log:
    Info:Starting Step CBS-make at 2006-03-25 11:29:47.0966 +1:00
    Info:wait until CBS queue of buildspace ABS_ESS_C is completely processed, before starting the import
    Info:waiting for CBS queue activity
    Info:wait until CBS queue of buildspace ABS_ESS_C is completely processed, before asking for build results
    Info:waiting for CBS queue activity
    Info:build process already running: waiting for another period of 30000 ms (1)
    Info:CBS server log has been written to CBS log
    Fatal:the compartment abs-team.de_ABS_ESS_1 contains dirty DCs after the CBS build process:
    Info:dirty DC in compartment abs-team.de_ABS_ESS_1 (dcname=ess/example2 dcvendor=abs-team.de)
    Fatal:communication error: CBS error: dirty DCs in buildspace after the CBS build process
    Info:Step CBS-make ended with result 'fatal error' ,stopping execution at 2006-03-25 11:30:18.0778 +1:00
    The CBS server log mentioned above says the following
    Build number assigned: 15596
    Change request state from QUEUED to PROCESSING
    ACTIVATION request in Build Space "ABS_ESS_C" at Node ID: 7,411,650
         [id: 6,706; parentID: 0; type: 4]
         [options: IGNORE BROKEN DC, FORCE ACTIVATE PREDECESSORS, FORCE INTEGRATED, IGNORE COMPONENT INTERSECTION]
    REQUEST PROCESSING started at 2006-03-25 10:29:54.169 GMT
    ===== Pre-Processing =====
    List of activities to be activated:
    The following components belong to activities which already have been activated before:
         abs-team.de/ess/example2
    They will be removed from this request.
    Analyse dependencies to predecessor activities... started at 2006-03-25 10:29:54.200 GMT
    Analyse dependencies to predecessor activities... finished at 2006-03-25 10:29:54.200 GMT and took 0 ms
    Analyse activities... started at 2006-03-25 10:29:54.200 GMT
    Analyse activities... finished at 2006-03-25 10:29:54.200 GMT and took 0 ms
    Calculate all combinations of components and variants to be built...
    Prepare build environment in the file system... started at 2006-03-25 10:29:54.216 GMT
         Synchronize development configuration... finished at 2006-03-25 10:29:54.216 GMT and took 0 ms
         Synchronize component definitions... finished at 2006-03-25 10:29:54.216 GMT and took 0 ms
         Synchronize sources...
                   ...Skipped for Activation with option : IGNORE BROKEN DC
         Synchronize sources... finished at 2006-03-25 10:29:54.216 GMT and took 0 ms
         Synchronize used libraries...
                   ...Skipped for Activation with option : IGNORE BROKEN DC
         Synchronize used libraries... finished at 2006-03-25 10:29:54.216 GMT and took 0 ms
    Prepare build environment in the file system... finished at 2006-03-25 10:29:54.216 GMT and took 0 ms
    ===== Pre-Processing =====  finished at 2006-03-25 10:29:54.216 GMT and took 32 ms
    ===== Processing =====
    ===== Processing =====  finished at 2006-03-25 10:29:54.216 GMT and took 0 ms
    ===== Post-Processing =====
    Check whether build was successful for all required variants...
         ..SKIPPED. Request option "IGNORE BROKEN DC" was given.
    Update component metadata...
    STORE build results...
    Change request state from PROCESSING to SUCCEEDED
    Analyse effect of applied changes to buildspace state... started at 2006-03-25 10:29:54.231 GMT
    Handle Cycles...
         No cycles detected.
    Determine components that have become DIRTY due to this request...
         No such components have been found.
    Integrate activities into active workspace(s)...
         Nothing to integrate in compartment abs-team.de_ABS_ESS_1
    Analyse effect of applied changes to buildspace state... finished at 2006-03-25 10:29:55.028 GMT and took 797 ms
    Request SUCCEEDED
    ===== Post-Processing =====  finished at 2006-03-25 10:29:55.028 GMT and took 812 ms
    REQUEST PROCESSING finished at 2006-03-25 10:29:55.028 GMT and took 859 ms
    I tried to build the application using the CBS. So i went to the respective cons build space and the DC shows with compile state yellow (middle icon). I clicked on the DC and build it. The buidling process failed, with the following request log:
    Build number assigned: 15696
    Change request state from QUEUED to PROCESSING
    BUILD request in Build Space "ABS_ESS_C" at Node ID: 7,411,650
         [id: 6,747; parentID: 0; type: 2]
    REQUEST PROCESSING started at 2006-03-25 11:04:39.622 GMT
    ===== Pre-Processing =====
    Calculate all combinations of components and variants to be built...
         "abs-team.de/ess/example2" variant "default"
    Prepare build environment in the file system... started at 2006-03-25 11:04:39.872 GMT
         Synchronize development configuration... finished at 2006-03-25 11:04:39.872 GMT and took 0 ms
         Synchronize component definitions... finished at 2006-03-25 11:04:40.294 GMT and took 422 ms
         Synchronize sources...
    Prepare build environment in the file system... finished at 2006-03-25 11:04:40.512 GMT and took 640 ms
    ===== Pre-Processing =====  finished at 2006-03-25 11:04:40.512 GMT and took 890 ms
    Change request state from PROCESSING to FAILED
    ERROR! The following problem(s) occurred  during request processing:
    ERROR! The following error occurred  during request processing:Failed to synchronize D:usrsapER4DVEBMGS00j2eeclusterserver0tempCBS3e.CACHE296DCsabs-team.deessexample2_comp/src/packages
    REQUEST PROCESSING finished at 2006-03-25 11:04:40.512 GMT and took 890 ms
    Anyone has an idea what could be the problem, as this error occurs with every application i developed so far. Everything worked great until i have to import it to the cons system.
    p.s.: importing the standard SAP ESS SCs into the Cons system did work great, just with my very own applications i get this problem
    best regards,
    Markus

    Hello Kiran,
    yes i have made sure that these 3 required SCs are added.
    everything is working from loading the Development Configuration into the NWDS, to checking in the changes, to activate them and to release them. Just when it comes to import them into the CONV Workspace, i get the error.
    When i click on Import at the CMS i get this first error at the default trace (right after i initiated the import, first entry made!)
    SQL statement is 'SELECT 'VSE'.'OBJECTID','VO'.'OBJECTTYPE' 'INTERNALTYP
    E','VSE'.'DEACTIVATED','R'.'RESOURCEID','R'.'RESOURCETYPE'
    ,'R'.'OBJNAME','R'.'PATHURI','R'.'PATHID','R'.'FULLPATHID'
    ,'R'.'DISPLAYNAME','R'.'CREATORNAME','R'.'CREATIONTIME','V
    SE'.'LASTMODIFIED' 'MODIFICATIONTIME','R'.'CONTENTTYPE','R
    '.'CONTENTLENGTH','R'.'CONTENTLANGUAGE','R'.'ISMASTERLANGU
    AGE','R'.'SOURCEURI','V'.'ISDELETED','R'.'DOCUMENTTYPE','R
    '.'FORMATVERSION','R'.'DOCTYPESTATUS','R'.'CONTENTSTOREID'
    ,'R'.'FULLCONTSTOREID','R'.'CONTENTMD5','R'.'TOUCHEDPROPER
    TY','CS'.'ISINDELTA','CS'.'DELTAALGORITHM','CS'.'CONTENTBL
    OB','VSE'.'ACTIVATIONSEQNO' FROM 'PVC_VSETELEMENT' 'VSE'
    INNER JOIN 'DAV_RESOURCE' 'R' ON 'R'.'RESOURCEID'
    = 'VSE'.'VERSIONID' INNER JOIN 'PVC_VERSIONEDOBJ' 'VO'
    ON 'VSE'.'OBJECTID' = 'VO'.'OBJECTID' INNER
    JOIN 'PVC_VERSION' 'V' ON 'VSE'.'VERSIONID'
    = 'V'.'VERSIONID' LEFT OUTER JOIN 'DAV_CONTENTSTORE' 'CS'
    ON 'CS'.'CONTENTSTOREID' = 'R'.'CONTENTSTOREID'
    WHERE 'VSE'.'VERSIONSETID' = ? AND 'R'.'PATHURI' LIKE ?
    ESCAPE ? AND 'R'.'OBJNAME' LIKE ? ESCAPE ?
    AND 'VSE'.'LASTMODIFIED' > ? AND 'VSE'.'ACTIVATIONSEQNO'
    > ? ORDER BY 7
    DESC,9,3'.","Error","/System/Database/sql/jdbc/direct","co
    m.sap.sql.jdbc.direct.DirectPreparedStatement","sap.com/tc
    ~dtr~enterpriseapp","SAPEngine_Application_Thread[impl:3]
    _26","7411650:D:usrsapER4DVEBMGS00
    j2eeclusterserver0
    logdefaultTrace.trc","000C297D05810064000002B90000035C00
    040FE39A4D1378","com.sap.sql.jdbc.direct.DirectPreparedSta
    tement","-2009,I2009,[-2009]: Join columns too
    long,erp04.abs-
    team.de:ER4:SAPER4DB,SELECT 'VSE'.'OBJECTID','VO'.'OBJECTT
    YPE' 'INTERNALTYPE','VSE'.'DEACTIVATED','R'.'RESOURCEID','
    R'.'RESOURCETYPE','R'.'OBJNAME','R'.'PATHURI','R'.'PATHID'
    ,'R'.'FULLPATHID','R'.'DISPLAYNAME','R'.'CREATORNAME','R'.
    'CREATIONTIME','VSE'.'LASTMODIFIED' 'MODIFICATIONTIME','R'
    .'CONTENTTYPE','R'.'CONTENTLENGTH','R'.'CONTENTLANGUAGE','
    R'.'ISMASTERLANGUAGE','R'.'SOURCEURI','V'.'ISDELETED','R'.
    'DOCUMENTTYPE','R'.'FORMATVERSION','R'.'DOCTYPESTATUS','R'
    .'CONTENTSTOREID','R'.'FULLCONTSTOREID','R'.'CONTENTMD5','
    R'.'TOUCHEDPROPERTY','CS'.'ISINDELTA','CS'.'DELTAALGORITHM
    ','CS'.'CONTENTBLOB','VSE'.'ACTIVATIONSEQNO'
    FROM 'PVC_VSETELEMENT' 'VSE' INNER
    JOIN 'DAV_RESOURCE' 'R' ON 'R'.'RESOURCEID'
    = 'VSE'.'VERSIONID' INNER JOIN 'PVC_VERSIONEDOBJ' 'VO'
    ON 'VSE'.'OBJECTID' = 'VO'.'OBJECTID' INNER
    JOIN 'PVC_VERSION' 'V' ON 'VSE'.'VERSIONID'
    = 'V'.'VERSIONID' LEFT OUTER JOIN 'DAV_CONTENTSTORE' 'CS'
    ON 'CS'.'CONTENTSTOREID' = 'R'.'CONTENTSTOREID'
    WHERE 'VSE'.'VERSIONSETID' = ? AND 'R'.'PATHURI' LIKE ?
    ESCAPE ? AND 'R'.'OBJNAME' LIKE ? ESCAPE ?
    AND 'VSE'.'LASTMODIFIED' > ? AND 'VSE'.'ACTIVATIONSEQNO'
    > ? ORDER BY 7 DESC,9,3,","-2009,I2009,[-2009]: Join
    columns too long,erp04.abs-
    team.de:ER4:SAPER4DB,SELECT 'VSE'.'OBJECTID','VO'.'OBJECTT
    YPE' 'INTERNALTYPE','VSE'.'DEACTIVATED','R'.'RESOURCEID','
    R'.'RESOURCETYPE','R'.'OBJNAME','R'.'PATHURI','R'.'PATHID'
    ,'R'.'FULLPATHID','R'.'DISPLAYNAME','R'.'CREATORNAME','R'.
    'CREATIONTIME','VSE'.'LASTMODIFIED' 'MODIFICATIONTIME','R'
    .'CONTENTTYPE','R'.'CONTENTLENGTH','R'.'CONTENTLANGUAGE','
    R'.'ISMASTERLANGUAGE','R'.'SOURCEURI','V'.'ISDELETED','R'.
    'DOCUMENTTYPE','R'.'FORMATVERSION','R'.'DOCTYPESTATUS','R'
    .'CONTENTSTOREID','R'.'FULLCONTSTOREID','R'.'CONTENTMD5','
    R'.'TOUCHEDPROPERTY','CS'.'ISINDELTA','CS'.'DELTAALGORITHM
    ','CS'.'CONTENTBLOB','VSE'.'ACTIVATIONSEQNO'
    FROM 'PVC_VSETELEMENT' 'VSE' INNER
    JOIN 'DAV_RESOURCE' 'R' ON 'R'.'RESOURCEID'
    = 'VSE'.'VERSIONID' INNER JOIN 'PVC_VERSIONEDOBJ' 'VO'
    ON 'VSE'.'OBJECTID' = 'VO'.'OBJECTID' INNER
    JOIN 'PVC_VERSION' 'V' ON 'VSE'.'VERSIONID'
    = 'V'.'VERSIONID' LEFT OUTER JOIN 'DAV_CONTENTSTORE' 'CS'
    ON 'CS'.'CONTENTSTOREID' = 'R'.'CONTENTSTOREID'
    WHERE 'VSE'.'VERSIONSETID' = ? AND 'R'.'PATHURI' LIKE ?
    ESCAPE ? AND 'R'.'OBJNAME' LIKE ? ESCAPE ?
    AND 'VSE'.'LASTMODIFIED' > ? AND 'VSE'.'ACTIVATIONSEQNO'
    > ? ORDER BY 7
    DESC,9,3,","erp04.abs45team.de_ER4_7411650","0e1778e0bcb61
    1daab59000c297d0581","CMS_USER","0","0","com.sap.sql_0003"
    ,"1","/System/Database/sql/jdbc/direct","","461","com.sap.
    sql.jdbc.direct.DirectPreparedStatement","SAPEngine_Applic
    ation_Thread[impl:3]_26","","CMS_USER",
    regards,
    Markus

  • Windows error when importing Essbase cube into OBIEE

    Hi all:
    This question is perhaps more relevant to the OBIEE forum, but I put it up there a few days ago and got no response. So now I'm hoping to get some help on this side of BI land!
    My issue is that I'm trying to import an Essbase cube (system 11) into BI Admin Tool, but whenver I go to "Import from multidimensional" and hit "OK" after entering in the essbase server name and log/pwd, the BI Admin tool crashes. I get no error msg except for a couple of errors I see in the Windows event log:
    1. Faulting application path: C:\OracleBI\server\Bin\AdminTool.exe
    Faulting module path: C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\essapinu.dll
    2. Faulting application path: C:\OracleBI\server\Bin\AdminTool.exe
    Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
    I'm running a standalone OBIEE 10.1.3.4 on my local machine (Windows 7 32-bit) and the Essbase Server is on a separate Windows 2008 machine. I can ping between machines and all ports are open on the Essbase machine, so I don't think this is a network related issue. Also, my OBI RPD is working fine in all other respects. I have other data sources working in there with no trouble. My Essbase server is also working fine. I also tried to do this in a new RPD in case the old one was corrupted, but get the same issue.
    Any help would be greatly appreciated.
    thanks,
    Akshay

    Akshay,
    You must have the Essbase client installed on the same machine where your OBI Administration Tool is installed. This should get you past the error that you are receiving and should fix your problem. Since you are running 32-bit just download the 32-bit Essbase client from Oracle. You will most likely need to run download the required files to install the Essbase client and with Hyperion 11x you should be familiar with that required software matrix since you have Essbase running on a seperate server already.
    But now looking at your post I see that you state that one of the paths in your error is C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient\bin\essapinu.dll. The path C:\Oracle\Middleware is usually seen in Hyperion EPM 11.1.2. So, are you running Essbase 11.1.2 and OBIEE 10g or are you running OBIEE 11g? You'll need to specificy as OBIEE 11g can only interface with Hyperion Essbase 11.1.2 at present. And if I recall correctly the 11.1.2 Essbase client does not work with OBIEE 10g. Please clarify on these points.
    Let me know if that helps fix your issue. If that doesn't fix it post back here and we see if we can keep you going forward.
    Don't forget to reward points.
    Cheers,
    Christian
    http://www.artofbi.com

  • Not able import SLD setings into my Integration repository

    Hi,
    I am not able import SLD setings into my Integration repository.
    It says error while doing import via tools menu.
    Please help to import SLD.
    Regards,
    Bala Raja

    Hi,
    While doing 'import of software component versions' in the IR thro tools menu, I have encountered an error like below.
    "Unable to read software component versions from System Landscape Directory "sapserv:50000".
    Note: I was not able to select SXI for related integration server in the Business System Wizard(SLD Setting).
    Kindly advice me.

  • "Importing" table-comments into an existinting server model with a text file

    Hello
    i have redesigned a database with the "capture design" tool - server model and
    server model diagramm is ok.
    Now, i want add many table- and column-comments into the server model.
    I wrote these comments with the "comment on table..." and "comment on column...."-command (in uppercase mode)
    into a scriptfile and tried, to "import" this scriptfile with the "capture design" ==> "server model" ==> "DDL-Files".
    The designer said "Processing Complete: 0 error(s), 0 warning(s)". But if i look in the server model or in the
    server model diagramm....nothing happened.
    Has anyone an idea?
    regards

    Aha, we're onto something here + I've just been reading the thread with +75 replies that's currently on the front screen which seems to be related though not entirely.
    OK the original filename was Renting Checklist.txt with a space, I deleted the space and renamed it Renting_Checklist.txt, made it the only attachment to a new email and sent from my ISP email account to my gmail account and it went fine.
    So that's why then but it's strange that it went when it was attached on an email with another attachment (whose filename didn't contain spaces or special characters). Does this sound tied in with the similar problems that others are having? It ought to be worthy of a fix, I can't tell when this problem started because I haven't had cause to send an email with a text attachment that had spaces in the filename.

Maybe you are looking for

  • Item not relevant for Billing in STO case

    Hi, I have created the invoice from NL Delivery type but then i cancel the same invoice. Now i am going to create again the invoice ,it is saying item is not relevant for invoice. i have check everything and it is fine as Billing Relevance is "J' in

  • SGTIN number in SAP OER

    Hello Experts, Our client is planning to implement SAP AII and OER for product traceability. I have some basic questions on the concept. I would like to know in what instance an SGTIN number will be generated in OER. Is that while doing any transacti

  • Where can I change Firefox 4 default setting for proxy servers

    I am working on setting up firefox 4 in a multi user environment in linux. In FF 3.x releases, I could go to greprefs/all.js area and make the changes in the all.js file to chagne settings globally. But, I could not find any such file for firefox 4.x

  • Image slideshow with sdk

    Is it possible to have image slide show on iphone 2.0 with SDK APIs? I have a set of images downloaded from the web. Also, it seems that the photo library APIs are intentionally left out. Any workaround on that? e.g, adding a few images from my folde

  • The Challenge of Java

    Dear All, I have been learning Java for about half a year now, but I am still uncertain about its design philosophy. My questions are: 1. If I were to create a GUI based program, how should I manage the creation of frames (in main() or somewhere else