Import Video into photo app

On the photo app intro video they said can import photos and videos from my digital camera to the iPad.
I work using video feedback a lot and this is one of the main reasons I decided to get the iPad because then I will not have to take my MBP everywhere.
I just tried importing standard mp4 video into the iPad from both my camera and iPhoto but I got the message notifying me that the Ipad does not support the file format..
Can anyone help?
Mike

Hi Jon,
I just downloaded Media Info Mac. Here is what it says:
* MediaInfo Mac // Plain text file report
2010-04-12 00:03:55 +0200
Information for File: GOPR0002.MP4
General / Container Stream # 1
Total Video Streams for this File -> 1
Total Audio Streams for this File -> 1
Video Codecs Used -> AVC
Audio Codecs Used -> AAC LC
File Format -> MPEG-4
Play Time -> 18s 218ms
Total File Size -> 18.2 MiB
Total Stream BitRate -> 8 400 Kbps
Video Stream # 1
Codec (Human Name) -> AVC
Codec (FourCC) -> avc1
Frame Width -> 1 280 pixels
Frame Height -> 720 pixels
Frame Rate -> 29.970 fps
Total Frames -> 546
Display Aspect Ratio -> 16/9
QF (like Gordian Knot) -> 0.000
Video Stream Length -> 18s 218ms
Video Stream BitRate Mode -> VBR
Video Stream Size -> 17.9 MiB (98%)
Video Stream Title -> Ambarella AVC
Date of Original Encoding -> UTC 2010-04-11 23:13:30
Audio Stream # 1
Codec -> AAC
Codec (FourCC) -> 40
Audio Stream Length -> 18s 90ms
Audio Stream BitRate -> 128 Kbps
Audio Stream BitRate Mode -> CBR
Number of Audio Channels -> 2
Audio Channel's Positions -> L R
Sampling Rate -> 48.0 KHz
Bit Depth -> 16 bits
Audio Stream Size -> 283 KiB (2%)
Audio Stream Title -> Ambarella AAC
Date of Original Encoding -> UTC 2010-04-11 23:13:30
Does that report have everything in it? If not can you recommend an app?
Message was edited by: MikevanMac

Similar Messages

  • Import video from Photos app (OS X) / iCloud drive to iMove project

    I have some video clips on my iCloud drive that appears in my Photo app on OS X, that I want to edit in a iMovie project on my MacBook. How do I import these. I can't drag and drop from the Photo app to iMovie.

    If you turned off or uncheck iCloud Photo Library and My Photo Stream in the Photos app preference window, then the delete should not sync up to the cloud. Also, until you empty the 'Recently Deleted' container, the images are still on your Mac:
    https://help.apple.com/photos/mac/1.0/?lang=en#/pht3bfab2f96
    Deleted photos and video aren’t immediately removed from your library; they’re placed in the Recently Deleted album, where they remain for the number of days shown, and then are deleted. You can recover the items before that period of time (see the next task). If you have iCloud Photo Library turned on, the photos may remain in iCloud up to 40 days and then are removed from all your devices that use iCloud Photo Library. If you’re not using iCloud Photo Library, your deleted photos are removed from your Mac only.

  • I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this?

    I imported videos from photo into iMovie when I set up iMovie (obvious mistake) and now iMovie doesn't work properly, nor can I move specific videos into a folder where I want them. How do I fix this? I even tried deleting iMovie, bought a new copy and installed it, but the folder "iPhoto Videos" is still there and I can't get new clips loaded to iMovie, especially where I want them. Please help.

    The iPhoto Videos do occasionally have problems. I've seen a lot of people write messages to this Discussion group describing similar problems. The only thing that seems to get around this problem is to pull the video clips out of iPhoto then import them directly into iMovie. Once the troubles with iPhoto Videos starts, I haven't yet seen anyone write back with something that they did to fix it.
    The most difficult part of doing this is the movies in iPhoto might be a little difficult to track down. But you can create a smart alum that does that for you. Go to iPhoto > File Menu > New Smart Album:
    Set the first pulldown menu to keyword, second to contains, then in the last box type Movie with a capital 'M'. Then click OK. This smart album more or less does as search of the whole iPhoto Library and only displays items that match your search tearm of "Movie" exactly. In that smart album then you can find the original Movies you want to move out of iPhoto and into iMovie, <CTRL> click on the Movie clip, then choose Reveal in Finder. That will jump you out of iPhoto temporarily and into the iPhoto Library folder. From there you can move that movie file to the desktop. Move all the clips you want, once they're all collected up go to iMovie and go to the File Menu > Import Files. Then point it to the desktop where you moved your video clips.
    This will put all those videos into an Event folder in iMovie and bypass iPhoto Videos altogether.

  • How can I import video into iMovie from a DVD?

    How can I import video into iMovie from a DVD?
    Thanks,
    Doug Davis

    You can do this with a free app called MPEG Streamclip and a $20 quicktime component from Apple.
    See detailed instructions here.
    https://discussions.apple.com/docs/DOC-3951

  • Which is the better way to import videos into FCPX?

    Hello to all. I have recently purchased an iPhone 5 and while importing videos, I could import them directly via the camera import of FCPX which was open at that time.
    Later, when I tried to import a few stillshots, I found that I could not do it directly with FCPX importing into an event: reason being FCPX would not read the still photos. I learnt from the internet that one could import photos/videos from iPhone either through iPhoto or image capture. I tested out both of them and learnt that I could get my phoyos into FCPX via either of them.
    My question is this: is it better for me to import videos into FCPX directly or to first save them on an external HD via image capture? Will there be any effect in the quality of the video in these two different methods of import?
    Thanks in advance.

    You have already pocketed my thanks in advance Tom! The early bird catches the worm! Awake so early? Have a great day.

  • Problems importing video into Lightroom 5.3

    I am using LR 5.3 on a Macbook running Mavericks.  Since upgrading from Lightroom 4 I have had trouble importing videos into Lightroom. 
    The generic video thumbnail appears, but the import hangs and never completes.  When cancelling the import the error message is shown "No photos or video were found to import."
    After reading on various forums I have tried:
    restarting computer (many times)
    uninstalling previous version of LR
    purging video cache
    changing source location
    changing destination and/or import type
    reinstalling LR5.3
    I have also noted that old videos already in the catalogue that played fine in LR4 won't play back in LR5.3.  They play fine in Quicktime.
    Has anyone else solved this problem?

    Hi InVisionMedia
    I found a Simular Poste regarding this topic: http://forums.adobe.com/message/5397854
    So going over it might enlighting you on the issue. Also i would suggest to start with the Basic Troubleshoot for Playback issues on Lightroom: http://helpx.adobe.com/lightroom/kb/troubleshoot-video-issues-lightroom-4.html
    If you have Lightroom 4 still installed, Also make sure that you can still use the footage in the original L4 catalog.
    See if the files still work fine in the "old" version.
    Hopefully it will help you to fix the issue.

  • Importing video into ipad2 iMovie

    How do I import videos into ipad2?

    And yet just another example of how apple-centric limitations frustrate even the simplest functions.  If I can import a video directly into my iPad from my "non-apple" camcorder, and play it... Then I shouldn't have to use iTunes on another computer to not only covert the file, but to import it as well so that iMovie can "see" it!!!
    This even happens when using garage band ON MY IPAD then trying to use the music I created in I Movie ON MY iPAD!!!  You have to save the music to iTunes then connect to a laptop then import the music back to your iPad.
    This is CRAZY!!!!!!!
    Apple... Get your act together and make all this stupid crap stop... PLEASE!!!!!!!!!!!! 
    Samsung Galaxy anyone?  While the video editing app isn't as good as iPad yet, the comparability and functionality blows iPad out of the water... You can actually save to folders!  Watch out apple google is hot on your a$$

  • Imported video into iMovie but has no audio

    Imported video into IMovie has the video but no audio. I did recently upgrade to OS lion and earlier video imports from snow leopard is fine

    I too have this problem, I cannot get any audio in my imported movies, this was not a problem two weeks ago, can anyone help me?

  • How to import video into adobe muse?

    how to import video into adobe muse?

    If you want to embed videos in your muse site, without using a service like youtube or vimeo, then you will need to manually upload the video files on the server and use them via the video tag available in html5, HTML5 Video
    To insert the video tags in your muse pages, you will need to use the 'Object -> Insert HTML' option.
    Since this option is not available in Muse, out of the box, I will recommend that you post this on our ideas section over here, https://forums.adobe.com/community/muse/ideas, and let our devs team know of this requirement.
    - Abhishek Maurya

  • Problems importing video into Event....

    Hi,
    I've used iMovie loads but recently I've had issues importing video into an event.
    I choose "import", choose the video (from GoPro) and then it takes 2-3 hours to import maybe half of the clips but not all.  I am importing no more than 7 clips at a time and these clips are 17 minutes each.
    Are the clips too big?
    Please help.
    M

    Hi InVisionMedia
    I found a Simular Poste regarding this topic: http://forums.adobe.com/message/5397854
    So going over it might enlighting you on the issue. Also i would suggest to start with the Basic Troubleshoot for Playback issues on Lightroom: http://helpx.adobe.com/lightroom/kb/troubleshoot-video-issues-lightroom-4.html
    If you have Lightroom 4 still installed, Also make sure that you can still use the footage in the original L4 catalog.
    See if the files still work fine in the "old" version.
    Hopefully it will help you to fix the issue.

  • Importing Video into iMovie using Mac the Ripper

    How do I import video into iMovie using Mac the Ripper? I ripped the video content onto my computer but it was not converted into a file that I can import.

    I think it's trend for all users since we can get more funny from digital life. Also it's necessary sometimes for us to save our video or dvd files with other methods, i have no idea but use something like converters.To my experience, mactheripper is not what you want,maybe you can try this dvd ripper for mac.Maybe ripper is illegal, but i just get my oringinal files, and i want to do more with it, that's just it!

  • Importing Video into Flash Project ?

    Hi, I want to ask you about how can I import video into my Flash Project and make it possible to view ?
    I tried to choose embed FLV but the sound quality is quite shity and the video quality too. Furthermore, It expands the timeline which is too long because my video is quite long too. It said that it can be at least 16000 Frames to run.
    Now I choose Import -> Import Video -> Load External ..... and then I put it on one scene. The thing is that when I test it, it looks like I have to expands the timeline too so that I can play the videos fully. And It will slow down the computer so much when I want to export. Is there any way I can play the video only by just creating one keyframe ?
    Please help me.

    i choose Load -> External and it gives me some FLVPlayback in the library too ... But how I can make it relate to the previous scene and it can play the whole video and then back to the first scene...
    First scene is where people can choose some option that I made of ...
    A is where I link to the scene 3 of my project
    B comes to Scene 4
    C comes to Scene 5
    What I'm stucking right now is how can I made the C choice for people to choose and they can see the videos. I tried to drag the FLVPlayback to the scene 6 and it shows some result. But I think if I want to watch the whole video I need to expand the timeline as much as possible and I really don't want that. Is there any actionscript code or some tips that I can make it possible? Sorry because I'm a newbie so I don't understand your words. Can you explain it more ?

  • Problem importing photos into photos.app from camera and iPhone

    Connect Nikon D300 or iPhone 5S to Mac.
    Photos.app comes on.
    Select: import photos.
    -73 photos coming from Nikon in Nikon's RAW format, NEF. 3 would not import because of "error in file format or other problem...."
    -Disconnect the camera.
    -Reconnect the camera.
    -Attempt to import remaining images.
    -Last three images import but are now out of order relative to when they were shot.
    About 20 photos and videos coming from iPhone. Similar problem but one that required repeating the above process several times to get them all imported.
    Anyone else seeing this or have any idea why it would be a problem?
    Thanks

    "Import Photos at their Current Location"
    "Copy photos to a new location and Import"
    "Move photos to a new location and Import"
    "Move photos as Digital Negative (DNG) and Import"
    I believe I *should* have an option to add to the library (I've seen screenshots of it).
    I'm not sure I understand your question, since I don't recall the screenshot you mention. However, I like to add photos to my library w/o creating a new folder, too.
    Here's an example of how I do this with my Nikon photos:
    1. I already have some photos in my library. One folder is labeled Nikon, where I put my D80 photos (all of them, so far).
    2. When I hook my camera/memory card to the computer, I manually drag the images to that folder on my drive called "Nikon". This is the same folder I have imported into LR previously.
    3. Start LR, Select "Import", and migrate to and select that same folder ("Nikon", in my case).
    4. LR will tell you that it is not importing certain files, because they're already in the library. Click OK and LR will import the other, new files into the same "Nikon" folder (in my example).
    Voila! ..no new folders in LR, just more photos.:)
    Obviously, I've set LR's preferences to "Do nothing" when a memory card/camera is detected.
    If I missed your point, sorry for the distraction.
    regards,
    jeff

  • Can't Drag Folders into Photos App?? Import only presents 100 photos!

    So I tried importing my Aperture library with no luck - seems that I must unlock a folder every time I want to edit a photo.
    Now I'm simply trying to create a New Photo Library and I drag a folder (with subfolders) into the app and nothing happens.
    So I try the import menu item and it only finds the first 100 photos.
    Huh??

    You don't import thing, you just open the Library:
    Hold down the option (or alt) key key and launch Photos. From the resulting menu select 'Choose Library'

  • Put videos back into Photos app??!!!!

    Here's the thing... I take random videos now and again when I'm out with friends etc just silly stuff really, but I love looking back at these videos months later. I'm finding with my iPhone that I delete most of my videos say from a weekend away leaving 1 or 2 on there, but even this takes up quite a bit of space over time and I have to delete some more later on to have room to shoot new ones. 
    I want to be able to put videos back into the photos section of my iPhone 4 in native format (no conversion) and I'm pretty sure they can only be put in the videos section of itunes and synced to videos section of iPod on iPhone (I tried adding to an iphoto album but it didn't transfer to photos section) 
    Does anyone know if dropping videos into itunes in HD as they are will allow them to sync back to iPhone without conversion? 
    Does anyone know of a way of adding HD videos shot on iPhone back to iPhone without having to double them up by putting them through iTunes?
    I have all my videos stored in a folder on my imac so I can move them around easily, play on my different computers etc but having to add a few to itunes just to watch them on my phone again seems like such a pain. 
    Ideas welcome
    Cheers

    In the photos section of the iPhone sync page, there is an option to sync videos as well I believe?
    Have you tried that?
    (I don't have iTunes with me at work so can't remember for sure)

Maybe you are looking for

  • Missing Classification Category When Trying To Run a Report Inside SCSM!

    Hi Folks, Some of my incidents categories go beyond five levels which means they have sub-sub-sub-sub categories like below :- For Example (for a lack of better examples :D ) :- Email Problems      1.1 Mailbox is full          1.1.1 Can't receive mai

  • LWAPP 1231 does not join the controller

    I have LWAPP AIR-AP1231G-A-K9 that was moved from one site to the other one. It has now a different IP address taken from DHCP and its former controller does not exist any more. I am trying to join it to the same kind of controller which is AIR-WLC44

  • Sealing violation error

    I get a sealing violation error when i run a servlet that does a XML file to Access table data transfer. I use a crimson jar file and extract it (classes) into the classes directory of my web app. How to i avoid getting this violation error. Any Idea

  • How can LabView export Power point file page per page and read it by picture(jpeg type)?

    I want to get data from power point,read it page by page and show data as picture ( jpeg type) anyone know how to do,Please discuss in this topic. I'm really need your help so much. and if need active X,What is dll file for it ? and How to get dll fi

  • Namespace address

    Hi I have problem with namespace addresses of ESB services. Namespace location points to the address of the server within our network (local name of this machine), which is not valid outside our organisation. How to change that entry to force server