Important information regarding the Flex 2.0 runtime and UNIX

Hi,
There's an issue with Flex 2.0 when the J2EE is installed on a UNIX server.
upon deployment and running an iView, the runtime shows only a blank grey area.
upon refreshing the browser, the iView is displayed as ussual.
the source of this issue, as we discovered, lays in the configuration of the J2EE engine.
and so - in order to solve this issue, one should access the J2EE Visual administrator and perform the next steps:
1. In Visual administrator, go to HTTP Provider service of the server.
2. Look for the "Never Compressed" property.
3. Add "*.swf" and also "application/x-shockwave-flash" to the list. Make sure that you also add commas properly...
4. Restart the J2EE server and test the result.

Hi,
Please try to delete the browser cache ("Delete temporary files" in IE).
I know that sounds silly, but it could really solve the issue
afterwards you can deploy and run as ussual.
If that works, please let as all know.
(points is also good..)
Amir
Edited by: Amir Mimran on Apr 15, 2008 8:59 AM

Similar Messages

IView deployed using the Flex 2.0 runtime returns a blank screen

Hello Everybody,
We upgraded Visual Composer for NetWeaver 7.0 to SP Stack 21 and now when we run a Visual Composer iView, deployed using the Flex 2.0 runtime, a blank screen appears instead of the application.
We use windows server and mssql as db.
Please help.
Thanks,
MD

Hi Maulin,
to solve your issue perform the following procedure:
           1. In Visual administrator, go to the HTTP Provider service of the server.
           2. Click the "Properties" tab.
           3. Find the "Never Compressed" property.
           4. Add "*. swf" and also "application/x-shockwave-flash" to the list.
           5. Click "Update", and then "Save"
           6. Restart the J2EE server and test the result
If it still not working you should create an OSS Note,
hope been helpful,
best regards,
Marco.

I need information regarding the creation of Workbook and WAD.

Hi,
I need information regarding the How to create the Workbook and WAD.
Can any one help me to get the information..
Regards,
Suman
Edited by: Suman Reddy Vuyyuru on May 19, 2009 8:22 AM

Hi,
for workbook:
[Queries in Workbook|http://help.sap.com/saphelp_sem40bw/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm]
for WAD:
[WAD for Beginners|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/749a4622-0a01-0010-36bf-b6b30a2a3a22]
thnks.

Can I get information regarding the client browser using JSP

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

can I get information regarding the client browser using JSP. like.. name, screen resolutions, font type, screen width and height of the browser etc.,
if possible then please give me the samples..
thanks,

HT201263 I forgot my passcode to iphone 4s. I entered wrong and now it says, disabled connect to itunes. I have some VERY important information on the phone and it was not backed up. Is there anyway I can unlock my phone and not lose my information?

I locked my iphone 4s, I forgot the passcode and it says disabled connect to itunes. I have some very important information on the phone I can't lose, How can I retrieve that information if the phone was not backed up to icloud of my mac? I will go to court over this to prove it is my phone. I just can't lose this information. Please, Please, Please, help me. I will mail the phone in to apple store if that will help.
Leslie

Kyderbylove wrote:
I locked my iphone 4s, I forgot the passcode and it says disabled connect to itunes. I have some very important information on the phone I can't lose, How can I retrieve that information if the phone was not backed up to icloud of my mac?
You can't. If your phone is disabled, the data has already been erased...that's the whole point of the passcode. Your only option now is:
Turn your phone off, then force it into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem-.thanks

I am trying to import cr2files from the camera into lightroom 5 and keep getting an error message saying Lightroom can not read the files and therefore will not import them. Has anyone had a similar problem….thanks

If you are having the same problem, i.e. a disk permission problem, open your favorite search engine and search on, "change disk permissions", and I think you'll find plenty of information on how to fix the problem. This is a Lightroom forum. Your problem is with your operating system. There is no sense in rewriting instructions that are already available if you do a simple search.

Can i port the flex fdb to c++ and use it in my application

Hello adobe team
i like to build graphical as/flex debugger
based on the open source flex , my native language is not English
so from reading the license documents im not sure if i allowed or
not to port/learn how to the flex fdb to c++ and use it as base to my application .
thanks for the help.

I heard from friends the best phone reception in India is Nokia or Sony...because the call centres for both companies have call centres in India and they said the best receptions from cellphones/networks is via Nokia or Sony.
I fully support Apple I have many products but if you spend so much money on an iPhone 4S that didn't work out; why not spend time goggling India's network provider/carrier and do some research?!?
Or email Apple support with all your questions, details, informations and maybe thay can help you out more. It was me, the best answer is to Spend the time on research before making a purchase.
Good luck.

Can i port the flex debugger to c++ and use it in my application

Hello
i like to build graphical as/flex debugger based on the open source flex , my native language is not English
so from reading the license documents im not sure if i allowed or
not to port/learn how to the flex debugger to c++ and use it as base to my application .
thanks for the help.

I heard from friends the best phone reception in India is Nokia or Sony...because the call centres for both companies have call centres in India and they said the best receptions from cellphones/networks is via Nokia or Sony.
I fully support Apple I have many products but if you spend so much money on an iPhone 4S that didn't work out; why not spend time goggling India's network provider/carrier and do some research?!?
Or email Apple support with all your questions, details, informations and maybe thay can help you out more. It was me, the best answer is to Spend the time on research before making a purchase.
Good luck.

TS3988 The correct information in the email address, Full name and Incoming mail server panes are greyed out, and I can get no further in bring my iCloud a/c online. Any ideas? Thanks.

I've just updated and installed Mountain Lion. I've clicked for iCloud for Mail. The correct information in the email address, Full name and Incoming mail server panes are greyed out, and I can get no further in bring my iCloud a/c online. Any ideas? Thanks.

They are grayed out because they are automatically set up whey you check Mail in System Preferences. If you didn't do that, go back and do so and your iCloud email account will be set up automatically.

Query regarding the Node manager configuration(WLS and OAM Managed server)

Query regarding the Node manager configuration(WLS and OAM Managed server):
1) In the nodemanager.properties I have added the ListenAddress:myMachineName and ListenPort: 5556
My setup : One physical Linux machine(myMachineName) has : WLS admin server, managed server(OAM 11G) and nodemanager.No clustered environment.
2) nodemanager.log has the following exception when I start the oam_server1 using EM(Enterprise Manager11g):
Mar 23 2012 1:39:55 AM> <SEVERE> <Fatal error in node manager server>
java.net.BindException: Address already in use
at java.net.PlainSocketImpl.socketBind(Native Method)
at java.net.AbstractPlainSocketImpl.bind(AbstractPlainSocketImpl.java:336)
at java.net.ServerSocket.bind(ServerSocket.java:336)
at javax.net.ssl.impl.SSLServerSocketImpl.bind(Unknown Source)
at java.net.ServerSocket.<init>(ServerSocket.java:202)
at javax.net.ssl.SSLServerSocket.<init>(SSLServerSocket.java:125)
at javax.net.ssl.impl.SSLServerSocketImpl.<init>(Unknown Source)
at javax.net.ssl.impl.SSLServerSocketFactoryImpl.createServerSocket(Unknown Source)
Default port on which node manager listen for requests is localhost:5556.I have changed it to point to my machine. The port should be of WLS admin server or it should be the managed server port?
3) I have started the NodeManager using the startNodeManager.sh script.
4) The admin server port is 7001 and the oam managed server port is 14100.
Any inputs on what might be wrong in the setup will be helpful.Thanks !

By using netstat -anp|grep 5556 you can check which process on your machine is using the 5556 port.

Is there a way of programmatically accessing fault/error/BIT information from the PXI-6723 during runtime?

In fact can you access fault information for all PXI cards? How do i detect that there is a fault with a board from within the software so i can report this to a higher level application?
Thanks
Martin

Hi Robert,
So in essence what you're saying is that if a component on the device fails there is no way to know this as long as the device is still communicating with the PC? It would appear that the Self Test function is a bit of a misnomer - it doesnt actually do what it says on the tin.
So which of the 2000 errors can actually be returned by this function call? I appreciate that there are a broad range of errors but I would like to know which one(s) can in reality be returned by this function. I need to somehow categorise the errors into whether or not the device is healthy so i can communicate this to our customers software (wo have no knowledge of internal NI error codes) so they can decide whether the board needs replacing. Of the 2000 error codes which of these could potentially relate to a hardware failure of some sort as opposed to a software configuration error.
I have found this thread which details some error codes on a NI 446X device (is there something like this for all errors on all devices?):
http://digital.ni.com/public.nsf/allkb/95328C2FAF9DA99A862576E200785C11?OpenDocument
Lastly where in the NI DAQ help references are the list of error codes and meanings as listed in NIDAQmx.h. For instance what does DAQmxErrorPALThreadControllerIsNotThreadCreator actually mean? I don't want to wait for the error to occur in my system before I get information on what it means - it would be useful to know and understand before I write the software what errors may occur on each device.
Thanks
Martin

Information regarding the variants stored during broadcasting

hi Guru's
we have reporting requirement where we need to fetch the details of the persons whose mail id has been broad casted and the frequency in which they will be mailed
currently i am in need of finding the relationship between the workbook name and the email id
with the workbook name how can we fetch the e-mail to which the mail has been sent
your inputs to this is highly valuable.
Thanks in advance
S.Janagar

hi lavanya,
i think u had understood my requirement wrongly
please go through the question and then please answer it
the mail id details u will enter in the portal displayed while broad casting and then u will schedule it
and the workbook will be sent to the persons whose email id has been given
and my question is in which table u can find these email ids in BW system and more over i need the relation between work book and email ids
with regards
s.janagar

What's the best way to mix AIR 14 and the Flex 3.5 SDK and use new AIR features?

I am returning to development of a popular desktop AIR app, after about 4 years of no code changes. Both AIR and Flex have actively moved forward during my coding absence, and it is time to play catch up.
When last built, the app was using Flex 3.5 and AIR 2.6.
End Goal - I want my app to look good on high density displays
I'd like to keep Flex version at 3.5, but use the newer version of AIR, to render more clearly on high density displays (Retina on OSX and hiDPI on Win8).
The pixel doubling performed by the "compatibility" modes of OSX.Retina or Win8.hiDPI make my app look pretty gross, and the customer base is starting to complain.
While I may eventually switch over to the Apache Flex SDK to bring the application design into the current state, my customer base just doesn't care right now. They like the current app, but want it to work, out-of-the-box, on high density displays.
So I need to limit my scope to changing only the AIR SDK, not the Flex SDK at this time.
Step 1 - Overlaying AIR14 SDK on Flex 3.5
I followed the official generic overlay instructions here, and that worked well enough. I named my hybrid SDK folder "3.5.0.AIR14". I have been able to recompile, run, and verify my app using the hybrid SDK. (my app is compiled and packaged from an ant script, using the Antennae framework. I had already switch SDKs a number of times over the initial course of development, so pointing my project to a new SDK was pretty simple enough.
Step 2 - Updating the app.xml descriptor
This part was also easy. I used the templates\air\descriptor-template.xml as a starting point, customizing the name, app id, and folders. Now my app descriptor is correctly based on the <application xmlns="http://ns.adobe.com/air/application/14.0"> namespace.
Step 3 - Enabling Retina/hiDPI support - Help??
I added <requestedDisplayResolution>high</requestedDisplayResolution> to the <initialWindow> tag of the app descriptor, but that made no difference. The app compiles, installs, and runs, but pixel doubling is still occurring and the app looks gross.
I also tried setting the SWF version to 25, according to the official overlay guide. This proved to be more difficult. The official overlay guide suggests setting the -swf-version=25 compiler option, but that option is not supported by the Flex 3.5 compiler. So all I had to try was using the legacy -target-player=25 compiler option. That setting was accepted by the compiler, and it produced a SWF with byte offset 0x3 == 0x19 (25 dec), so that appears to be right.
But -target-player=25 didn't have any effect either.
Is setting the SWF version even required? Isn't the whole point of using the AIR 14 namespace in the app descriptor the way of telling the compiler "I want to use all features of the AIR 14 release". Why do I need to tell the compiler multiple times to use all the features of the SDK I'm compiling with? It just seems weird to me.
Have I missed a secret setting somewhere?
How can I tell the AIR runtime to simply run as pixel-dense as possible? When the workarounds listed below are performed, my app looks fantastic on high-density displays. But its the pixel scaling that is making everything look bad, and I desperately want to get this fixed.
Workarounds?
On Windows 8+, we are asking our users to enable the "Disable display scaling on high DPI settings" checkbox on the AIR application shortcut. This works, but is a confusing setting for average users to discover. Most just give up in frustration.
On OSX, we can't even disable Retina mode on a per-application basis, its all or nothing, so that's even worse. SwitchResX will automatically switch resolutions based on the selected app, but that's a pretty clunky (and non-free) workaround too.
Any other workaround ideas are appreciated too.
Cheers,
Doug

It took me a while to figure out (without much help from Adobe, grrr!), since some internet writeups were terse and implied somehow that AIR's Retina support (setting your app descriptor's <initialWindow/requestedDisplayResolution> to high) would also work on Windows. They don't.
On OSX, the steps to disable pixel-doubling are:
update your app descriptor to AIR 14
set initialWindow/requestedDisplayResolution = high
compile with SWF version 25 or greater
vector assets, including text, will scale automatically
you'll need to replace your bitmap assets with Retina-quality bitmaps as appropriate
when running on a Retina display, you will see stage.contentsScaleFactor=2. It will be 1 for non-Retina displays.
On Windows, the pixel-doubling kicks in when you have a HiDPI scaling set to about 150% or greater (hiDPI scaling was introduced in Win7). There is no way to detect from within an AIR app when Windows is doing its HiDPI scaling. stage.contentsScaleFactor is always 1, under all configurations.
The only thing you can do for AIR apps on Windows is explicitly disable display scaling (like you have done) and update your app to manually scale all UI elements at runtime (that's really gross and hard, and it what I working on right now).
For my app, I updated our Windows installer to set the registry to disable hiDPI scaling, for all users, just for our app. Here's how you do that:
Key = HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\AppCompatFlags\Layers
Name = <fullPathToYourExe>
Type = REG_SZ
Value = "~ HIDPIAWARE" (without the quotes, tilde space HIDPIAWARE)
That should be set in the full 64-bit registry, not the Wow32Node registry, even if your app is a 32-bit app (which all AIR apps are). If your installer is a 32-bit app (mine was), you may need to jump through some hoops to have it affect the 64-bit registry hive from a 32-bit process.
If you only want to change the setting for the current user (not all users), the KEY root is HKEY_CURRENT_USER instead of HKEY_LOCAL_MACHINE.
If you don't have an explicit installer for your AIR app (ie. if you are deploying from the web via a badge installer), then you're even more messed up, and you will need to tell your users to disable the scaling manually.
I know, it's a total pain. I hope this helps.
Cheers,
Doug
PS: Adobe devs, if you are listening ...

Very important information: No access, but Static IP set and port forwarded?

Here is some important information I just learned, and I hope it will benefit the entire community.
So, I have a WRT54G router, and I was trying to make a webserver. Everything should have been working fine, but I could not access it when I tried to use a proxy. (To eliminate local loopbacks.) I contacted a support rep at our favorite site, and after about 2 hours of going back and forth, they suggested I set my static IP address to something the DHCP range DID NOT cover. I did, and viola, it worked.
I can't honestly say why it did, or why I had not known of that before hand.
Point in case, try setting your Static IP address to one that is not included in the router's DHCP range.
I hope this information will be posted everywhere.
Enjoy!
~TGP1994

In Linksys routers, the DHCP server expects to have full control over all LAN IP addresses within its range. It does not expect you to assign one of its addresses (so this is likely the cause for your problem). Normally, any fixed (static) LAN IP address must be outside the DHCP server range, and it cannot end in 0, 1, or 255.

How to get the Details Regarding the tcode like used by and used in .

Hi all,
My requirement is if i give the Z* Tcode in the selection screen I should get the details like program Name and Creator Name and created on and last Changed by and used by and used in Related Data.
Somehow i managed to get all the data except for two fields used by and used in .Please let mke know is there any Function Module to fetch the used by(User Name ) and used in data or any table where this data is saved.
Thanks in Advance.
Regards,
Naveen

Hi Naveen,
What are you exactly looking for in "used by" (if it's who launched the transaction lastly -> performance statistics, transaction ST03N, search forum how to read it) and "used in" (programs in which the transaction is statically defined in CALL TRANSACTION, and other statements -> CROSS table)?
BR
Sandra

Important information regarding the Flex 2.0 runtime and UNIX

Similar Messages

Maybe you are looking for