Importing a transport request
Hi Expert,
In our Transport landscape some one has released a transport for QA system but the request is not reflecting in Import Queue of QA system.
Can some one advise how to import the request in QA.
Thanks
Kundan
Hi,
There might be some problems at OS level of Dev/Qua system and check the Co and Datafiles. Now execute Tcode STMS_IMPORT in Qua system. and goto following location from menu bar:
Extras-> Other Requests -> Add
Now give the Transport Request No. and Target Client.
This will add the Transport request into Import Queue of Qua system, now u can import the request.
Hope this will solve your query.
Regards
Lokendra
Similar Messages
-
Error while importing a transport request
Hi,
I installed two SAP ECC6 EHP6 IDES sytems and created a transport route between them.
When I try to import a Transport request I get the following error:
HALT: inconsistent preview tables E071K_STR (size=344) and E071KS_PREVIEW (size=128)
Please help me find a solution to this problem.Hello Occoro,
There are multiple steps you need to do, I am not sure if the following note is applicable to your version of SAP.
1730009 - Import queue does not work
Downloading R3trans and tp is similar to downloading kernel.
Download the versions relevant to your SAP Kernel 7.20, the latest patch should be available at http://service.sap.com/swdc
In the same area where you get SAP Kernels, you should be able to get files such as:
R3trans_xxx-xxxxxx.SAR
tp_xxx-xxxx.SAR
Download these files, uncar them to your kernel directory typically /sapmnt/<SID>/exe
Refer to the following note for more details:
19466 - Downloading SAP kernel patches
Good luck.
Regards,
Siddhesh -
Steps needed to import the transport request
Hello SAP gurus
I am trying to import a transport request consisting of a packacge into a server. I was able to create this transport request on first server and trying to import it into second server.
I read many postings on this site and played with STMS_IMPORT, STMS etc.,
But still can't see the package on the second server.
I don't know what I need to do on the second server (target) to make it accept this foreign transport request.
If some one can please point me to a link or document that gives the exact steps involved to do this, I would appreciate it a lot.
Thanks
Ramthanks sudhi
but i couldn't find the area allocated for basis related questions.
when i goto forums, i see only the following
Business Process Expert Application Server Community User Groups
Service-Oriented Architecture (SOA) ABAP Development Integration and Certification Center (ICC)
SAP Solutions Emerging Technologies Chinese: 中文论坛 / 中文論壇
SAP Business One Scripting Languages Japanese: 日本語フォーラム
SAP NetWeaver Business Objects Korean: 한국어 포럼
Database & OS Platforms Business Objects SDK Application Development Portuguese: Português
Portal Crystal Reports, Xcelsius and Interactive Analysis Spanish: Español
Business Intelligence University Alliances Business By Design
Industries Community Discussions
Any other suggestions will be highly appreciated.
Tks
Ram -
To check the user who imported the Transport request.
Hi,
Can we know who imported the transport request. We are able to see the owner of the request . Is there any place where we can see the User who had imported the transport request.
Thanks,
TanujHi,
1. Goto to transaction STMS_IMPORT
2. Menu, Goto--> Import History
3. Menu, Edit-->Display More
A column Name User will appear, giving user who carried the import.
Award points if you like.
Thanks
Imtiaz -
HOW TO IMPORT A TRANSPORT REQUEST AT OS LEVEL IN HP-UNIX PLATFORM?
HOW TO IMPORT A TRANSPORT REQUEST AT OS LEVEL IN HP-UNIX PLATFORM?
Dear Pavan,
When you exporting the transport request via TCODE Se01/SE09/SE10 two files are created at the OS level in Data and Cofiles folder residing in E:\usr\sap\trans.If you open these files you will see your exported request number You need to copy your reqest from the development server OS and then go to the Quality /Production OS and open the same folder E:\usr\sap\trans and paste it into the respective Datafiles and Cofiles folder.
If will surely work.
PS: I recommend not to do this way.Use tcode STMS for importing
Note: Users must be kept away from the application and database server.Hence they work on presentation server which is our GUI workstation.
Reward if hepful and your query is resolved.
Regards,
Ashutosh -
Hi All,
When i imported my transport request from development to maintenance system. It ended with errors.
It is showing error code 8 in the log.
The objects under the TR are not imported.
What could be the reason for the this.
Points will be rewarded
Thanks.
Ramyasome objects might be in Inactive stage.
Else, some Dependent objects might be missing.
Eg: You have transported table but missed the Data elements in that table.
Hope this helps.
Regards
Vinayak -
How to import external Transport request into sap system
Hi Gurus,
I have Transport request in the cofiles and data files into one sap system
how to import those files into another sap system (those are different sap systems)
could u tel anyone any settings is required and how to import Those Transport request.
Any help is appreciated.
Thanks in AdvanceHi Siva,
After copied the datafile and cofile in the target system go to Tcode STMS> select the target system import queue,there you go to menu extras>other request-->add, give the request no and excute it.
It will put the request in the que then you can import it to the target system.
Thanks,
Satyabrat -
Custom program to release/importa a transport request
Hi all.
I was searching the forum but I didn't found any post. Well, this is my issue: I want to create a program that can do all the transport steps: release a transport request and import this transport request in another system.
When I say "another system" I'm talking about SAP systems in the same transport route: Development --> Test --> Prod.
I didn't found any Function Module or BAPI to do this process. Any idea? I think there will be a FM/BAPI to release a transport request and another to do the import in target system.
Thanks in advance. Regards,
Roberto CampoHello,
To do the release : TMS_TP_EXPORT
To do the import : TMS_TP_IMPORT
For the rest check function modules in function group TMST in tcode SE80.
I don't understand why you want such a program.
Importing transports can be automated via STMS (example automatic import every 10 minutes), then you don't need to write your own program, because after release of your transport, transport comes in the QA import queue and will be imported via the automatic job.
Success.
Wim -
How could I see who imported a transport request
How could I see who imported a transport request (not who is the owner)
In import monitor I can see it but only for current day(or I can extend that period)goto SE01 ..
enter the transport request ...display
In
Object List of Request
Comment Entry: Released
EC6XXXXXX 20080325 190541 USER <-- person responsible
You'll have the person who released(USER) -
Prevent import of transport request for certain client
Hello.
I have two clients in TST system.
I would like to delete one client.
How can I prevent import of transport request for certain client?
At hte same time users must transport request into other client in TST system.
Is it possible?
I know next features:
1.
se37-->
SCCR_LOCK_CLIENT
SCCR_UNLOCK_CLIENT
2.
tp locksys SID (from OS level)
but they use for all client (for whole system).
Best regards,
Denisse37-->
SCCR_LOCK_CLIENT
SCCR_UNLOCK_CLIENT
These are Client Specific not Cross client. So if you want to delete a client just Schedule the Delete Job and lock the client and no body would be able to transport on that client. I hope i understand your question properly.
Regards,
Subhash -
Error when importing a Transport request in CHARM???
Hi all,
when i am trying to import a transport a request( thru CHARM) , its throwing an error " No valid system specified (Q11)" and "Import error: Check TMS Alert Viewer in target system"
Note::I was able to create a Transport request , release it but facing problem while importing to quality system.development system is ECC5.0 and quality is ECC6.0
rgds,
AnandHI abhi,
i havecreated the domain link, my ECC5.0 and ECC6.0 are in one domain of which ECC5.0 is domain controller,now i configured Solution manager as new domain controller and created a link between these two domains...
now my queries are:
1.is it enuf if i create a link between or even shud i create som transport routes between the newly added system from other domain and the existing domain
2.i am not able to see the STMS configuration in solution manager system.ie in my ECC5.0 system( domain ctrller)if i goto STMS->Overview menu-> transport routes i see the configuration, which i cannot see by logging into solution manager and wentto STMS->Overview menu-> transport routes i dont see
rgds,
Anand -
Error during import of Transport Request in PI 7.1
Hi Friends,
I have installed PI 7.1 server on HP-UX 11.23 with Oracle 10g.
After completing all the post-installation activities,I configured CTS for moving objects developed by PI consultant to Quality & Production server.
Using CTS I Successfully imported all objects in Integration Repository but When Iam trying import objects of Integration directory,it is showing the error during deployment phase.
Copy File Between Transport Groups 23.10.2008 13:04:07 (0) Successfully Completed
Import 23.10.2008 13:04:26 (0) Successfully Completed
Check Versions 23.10.2008 13:04:26 (0) Successfully Completed
Deployment 23.10.2008 13:04:28 (12) Canceled
When I go to Log of above it displays follow
Deployment
Transport request : SPDK900031
System : SPT
tp path : tp
Version and release: 375.30.40 710
CTS Deploy Service - Version 0.92 06.03.2007
========================================================================
Deploy Web service destination = CTSDEPLOY
Directory = /usr/sap/trans/data
SDM Deploy URL =
SLD Deploy URL =
XI Deploy URL = http://srstlspt:50000
Double-stack system SPT
Deploy for XID
Deploy File = 60913470a0d511dd873000306eeac205
Communication error in Web service CTSDEPLOY , exception is CX_AI_SYSTEM_FAULT
SoapFaultCode:1 Authentication failed. For details see log entry 00306EEAC205004E0000091A00000EC703
>>>51C766E6CBB4F0 in security log.
Return Code = 12
Highest Return Code = 12
Deployment
End date and time : 20081023151500
Ended with return code: ===> 12 <===
Regards,
Sunilhi,
I am looking forward to implement SAPKW70017, I need to know the CONS of SP17, what was the reason which made you implement SP17, just to have updated Version of SP or did you face with any problems and decided to update the SP? what was the previous SP which you had,
We have problems in F4 search help when running queries, SAP asked us to implement latest which is SP17, but wanted to make sure what would be the CONS before we do it, we are having SP15 in BI 7.0
Please update the post for this. -
How to set a job to import automatically transport requests
I wander how to set a job to import automatically transport requests
Hi jan Bo,
http://help.sap.com/saphelp_erp2004/helpdata/EN/44/b4a3c57acc11d1899e0000e829fbbd/frameset.htm
Usung above link you can schedule a transport, if you schedule this job a back ground job will be defined copy this job and create a new varient with your transport request. Make this job run after the back ground job you want.
Regards,
S.Manu. -
Ri import of transport request
Hi guys,
we have got a issue in transporting the request, we have uploaded files to the the server which needs to be imported to the development R3 server , the file contains a package which contains data dictionary objects, programs, function groups, transaction codes,
when we tried to transport the request in STMS, Only data dictionary objects were transported and other objects were not transported , but if we check the request it is showing all the objects.
what we can do for this .Can we re import the same request or we need to put it to other request.Please can anybody give us the procedure what we need to follow.
Regards,
Shivdeep B
Edited by: bsdeep on Mar 9, 2011 6:44 AMHi Shivdeep,
Can you please check if all the objects were properly included while the transport request was created?
Please check the import log if it was successful with return proper code.
Regards,
Sujit. -
Importance of Transport Requests
Hi,
I need the importance and significance of transporting objects (in detail)
In what situations transporting fails ?
what cases we go for transporting ?Hi Ramya,
Go through this and analyze it in ur own way.
<u><b>Answer to the Second query.</b></u>
Transport requests fails due to incompatibility/inconsistance in the systems
Most of this thing happens in ABAP side.
coming to functional side 90% wont happens, because (what are the configuration changes is the standard ones).
<b><u>Answer to the First Query</u></b>.
Basically to Transport to the Configurations and changes to the configuration from one client to the other without having to re-configure in different clients..
one thing u have to notice that what are all the objects done in the Sandbox it cant be transportable (if u want BASIS can do this thing to be transportable , i think to do this thing BASIS will go for SCC4(by using this they do transports).
Reward points if helpful..
Thanks
Naveen khan
Maybe you are looking for
-
Operation Could Not Be Completed Because An Unexpected Error Occured (Error Code -50)
Hi, I'm trying to copy files to my external drive. (3TB - Formatted to Mac OS Extended (Journaled)) and I keep getting this error. I have been looking it up on Google and in the forums and it seems the common problem is that the drive is formatted F
-
Bleed with PDF File not working. Help?
I created an 8.5x11 file in illustrator with a .25inch bleed on all sides and saved it as a pdf for print but there still remains a white border around the edges of the paper. Is this because the printer doesn't recognize bleeds? I'm asking this beca
-
So, when I have two closed-path objects resting against one another (say two squares, edge-to-edge) I see a very thin white line / gap at certain zoom levels, mostly when zoomed out or at 'fit art... to window'. However, when I zoom waaay in, the ga
-
Installing an air application directly to user root directory or C:\
I am compiling an AIR file for Flash CS 5 and the filed for install directory gives me a place where I can put a value for install location but this install location is inside the program files. I want my app to install directly to the C: drive on
-
Tomcat 4.0.5 and JDK 1.4.2 on HP-UX 11i giving core dump
Hi, I am using Tomcat 4.0.5 web server for a high data volume web based project. I have changed the JDK from 1.3 to 1.4.2. The os is HP-UX 11i. After changing the JDK version, I am getting core dump after every 6 to 7 hours and Tomcat fails to contin