Importing creates pops & hisses at the last few seconds

I am getting audio pops and hisses in the last 2 or 3 seconds of each track I import now. This used to occur less frequently and I was able to remedy the situation by re-importing the problematic tracks.
However, this has become a bigger problem these days as it happens more frequently, and re-importing often does not solve the problem.
I have Error Correction checked and Crossfade Playback is unchecked. Audio is being imported as Apple Lossless.
Is this a problem with my disc drive, hard drive, or iTunes itself?

Could you try turning off the scanWhenDone setting? Here's how:
(1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
(2) In the filter box, type or paste '''scan''' and pause while the list is filtered
(3) Double-click '''browser.download.manager.scanWhenDone''' to toggle its value from true to false.
''What this does: Normally Firefox submits the file to your AV software for an on-demand scan. Toggling this setting turns that off. It also prevents Firefox from adding a notation to the file that the source of the file was the internet. That may change how Windows treats the file. You should ensure that your real-time AV scanning is turned on when you have this feature turned off.''
Does that make any difference?

Similar Messages

Itunes keeps cutting off the last few seconds of each track!

Help!
I'm trying to import from a CD, and for some (but not all) of the tracks being imported, when I go to play them from my Library, itunes skips the last few seconds of the song and jumps to the next one. Usually it wouldn't be a problem, because most tracks on CDs have some dead time at the end, but for these you are supposed to go directly from one track to another - without down time in between or skipping any of the track (one song is spread out over several tracks).
I've tried re-importing the tracks using both the AAC encoder and MP3 encoder, specifying the the track end at a particular time (stop time - this information shows up when I "get info" on the track, under options) and the track length in my library shows up as that exact time from the CD. itunes just doesn't play the full length of the track!
How do I get itunes to play each track to the very end before jumping to the next one?
Jen

and the track length in my library shows up as that exact time from the CD
iTunes should play the full track. Did you tick the 'Crossfade playback' checkbox in Preferences>Playback? If so, uncheck it.
If the problem persists you can check if it's an inporting problem or an iTunes setting problem by doing this:
In iTunes select a 'problemtrack'.
Choose 'Show Song File' from the File menu (command-R).
Select the file and control-click on it.
Choose 'Open With' and select 'Quicktime Player' as the program to open the file with.
Now play the 'problemtrack' in Quicktime Player to the end and see if it still skips the last seconds.
If it plays the full track, your imports are OK.
Hope this helps.
M

IE cuts the last few seconds off my FLV videos

I have FLV (audio & video) clips on my website that
automatically play, then automatically take you to the next
scene...
work fine in Firefox, but not in IE...IE seems to cut off the
last few seconds before going to the next scene....anyone know
why?...there's also random audio "pops" only in IE....it's like IE
can't keep up with the frame rate or something?!?
(My FLV clips are not embedded in the SWF, but set up as
progressive in the same root directory on the same web server.)
check it out:
(2 clips: - "intro" & then click on any section and
there's another "4-second" clip)
http://mikepentaproductions.com/
any feedback would be greatly appreciated...this is my first
website and I can't believe how many issues I've been having,
trying to please both IE and Firefox...it's a conspiracy, I tell
ya!!
thanks for your time
-Mike P.

encourage the use of firefox
https://www.google.com/adsense/referrals

When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?

When I share a video with fcpx and it goes to Quicktime, the last few seconds goes mute. I checked the clip and sent that the same route and all is fine. It is only when I send the whole 3gb video. Any ideas?

paul71054 wrote:
... Any ideas?
add a few seconds black to your project.
Try again.
could be some really weird codec problem, with 'cut' GOPs', .. somethin'...

When I try to record a song it only records the last few seconds of the song.

When I try to burn a CD of my song on garage band, it now only records the last part of the song. The program is constantly crashing also since I installed Mavericks.

I mean when I try to burn a CD.

Shuffle cuts off last few seconds of the song

This morning when playing a playlist on Shuffle/Songs, iPod would cut off the last few seconds (15-30) abruptly and move on to the next track. I changed the shuffle to Album but with the same result. However, now in the afternoon, it is playing ok with the shuffle.
Has anyone else encountered such behavior? Could it be a bug in the software?
Dell Inspiron 6000 Laptop Windows XP Pro 1.6 GHz, 1GB RAM, iPod Video (30GB), v1.1.1

Hi all, I think I've figured out one solution to this problem. I have a 3rd Gen iPod and was having songs cut off. Random songs at random points near the end of the song. I've read a post here about deleting the artwork from the songs on the iPod, and it worked! Long story short: Use this script from www.dougscripts.com "removeallipodartwork" to delete all artwork from the iPod, not iTunes. iTunes is fine, only the iPod is having trouble with the little bits of artwork information. If you have any doubts, manually delete artwork from just a couple of songs, update your iPod and listen for the cut off (you can fast forward to near the end of the song). Believe me, I've tried everything else for the past 18 months or so. MP3, AAC, different quality, different iTunes versions, different iPod OS, restoring the iPod, I could go on. Hope this helps.

Encore Cutting Off Last Few Seconds of Burn

I created an avi file in Video Explosion Deluxe, which clocks in at 1:24:33. I've verified by playing the file on Windows Media Player that it plays fine all the way through to the end.
I imported it to Encore (I have the 3.0 version) as the only component in this particular project, and burned to DVD, at 7 Mbps, at a speed of 4x, which was the lowest speed option available.
Everything is fine until almost the end. It freezes at 1:24:28.
When I play the file in Encore to preview it before burning, it plays through to the end fine. So it recognizes the whole file.
I tried multiple more burns, and they always freeze 4-6 seconds from the end.
I then took that video file and imported it to Premiere Pro and created a new AVI file of the same thing. That behaves exactly the same when I burn to DVD with Encore.
I then started over and created the AVI file anew in Video Explosion Deluxe. Same result when I burn it to DVD with Encore.
I then created it as an mpeg file with Video Explosion Deluxe. Same result.
I then added a menu in Encore before burning. (I usually don't bother with a menu if there's just the one item instead of separate chapters.) Instead of freezing 4-6 seconds before the end, it plays to that point 4-6 seconds from the end and then reverts back to displaying the menu.
I then checked the last two DVDs I'd burned with Encore and realized that they too end 4-6 seconds before the end of the video file. (I don't mean of that same project; I mean two different projects with different video files. I just hadn't examined them closely enough when I burned them.)
I've experimented with just adding a few blank seconds to the end of the project in Video Explosion Deluxe or Premiere before creating the AVI file, but I haven't been able to make it come out right yet. For instance, I added ten blank seconds (making it 1:24:43 long, of which I really only want the first 1:24:33), and the subsequent DVD I burned froze at the 1:24:30 mark.
It's possible through trial and error I'll eventually figure out some way of adding the right amount of blank material to get it to stop at the 1:24:33 mark or just after, but this is silly, especially since it's apparently doing this with every project now and I don't want to be stuck trying to time this workaround just right every time.
Why won't it simply burn the entire file?

Appreciate the responses. On the rare occasions I've posted computer-related questions in online forums, they are nearly always greeted with silence, or the equivalent of "Read the manual and stop bothering us, newbie!" So it's a pleasant surprise when people actually try to help.
I've come up with another convoluted workaround that seems like it's actually working.
I'm making an additional AVI file of the last few seconds of each of the movies on VED.
So let's say it's a 1:20:00 AVI file that plays fine all the way to the end, but mysteriously when then burned to DVD stops at about the 1:19:55 mark.
I now have that AVI file, plus a six second file that is a duplicate of the 1:19:54-1:20:00 stretch of the first file.
I import both to Encore and place the full file on the timeline. I then chop off precisely the last six seconds of that, meaning it is now 1:19:54 long. Then I take my other six second AVI file and place it immediately after that back-to-back on the timeline. I watch that part in Encore before burning to make sure they fit together exactly--i.e., there's not a skip where a frame is missing or a frame is duplicated.
I've tried it on two, and both DVDs played through to the end as they're supposed to.
Evidently whatever screws up the last few seconds of the movies made with VED (which, by the way, never happened until the last couple days in all the years I've used VED) isn't affecting these little six or so second long AVI files I'm making to stick on the end. Maybe it's only files above a certain size or something that it's embedding some kind of mystery flaw near the end.
I'll be using primarily Premiere for my projects moving forward, so if this is solely a VED issue, I should be fine after this work I happen to be doing now.
Now, specifically on Hunt's suggestions, I've checked the projects on VED, and the video and audio tracks end at precisely the same frame.
Especially if my convoluted workaround stops working, I can next try adding that second or so of only video to the project before creating the video and audio files.
Just in perusing the options in VED, I'm not sure though if it's possible to make a video-only or audio-only file as you describe doing with Premiere. Is that (not "muxing") something that the more rudimentary video editing programs don't do? I know with VED I can simply delete all the content on the video tracks, say, or turn them off, but I don't think that gives me an audio-only WAV file. I believe it just means I'd end up with a conventional AVI file that happens to have a black screen as its video from start to finish.
So perhaps I could take the AVI file made with VED, place it on the Premiere timeline and there do the trick with the extra second of video. However, whatever the flaw is seems to be in the VED created AVI files, so I think anything done in Premiere with such a file after the fact would be too late.

Multiple Speaker Playback missing last few seconds of Play

Has anyone noticed that when connected to remote speakers that iTunes skips the last few seconds (usually around three seconds) of the podcast; however when just connected to the "Computer" speakers the podcast plays through entirely.
Is the problem because the iTunes software closes the sending socket before the remote speaker software picks up the packet from the receiving end?
Mac mini & Power Mac G5 Mac OS X (10.4.6)

Has anyone noticed that when connected to remote
speakers that iTunes skips the last few seconds
(usually around three seconds) of the podcast;
however when just connected to the "Computer"
speakers the podcast plays through entirely.
Ah! So it's because of the remote speakers, is it? I wondered what was happening. Yes, I've noticed it, although it's a niggle rather than a big problem for me, so I've never bothered mentioning it until now...

Last few seconds of some songs skipping

Under the new iTunes I am hearing the last few seconds of some songs skip or cut off abruptly when playing an album. If I go back to the songs and drag the slider near the end of the song they play fine. I reinstalled Itunes over top of itself but no joy. Has anyone else had this problem?. Thanks for any answers in advance. Allso I am running OSX Mavericks.

nope, not the cross fader. most songs play 100% fine, but i've noticed quite a few which just abruptly end around 30seconds before there supposed to. I origional thought it was a transfer error since I do have USB 1.1, but since the songs play fine off the ipod when using itunes, it can't be

ITunes 7 sometimes skips last few seconds of a song

It seems that whenever iTunes reaches the last 20 or so seconds of a song, it skis to the next song... it just cuts off, even when I have shuffle turned off (I'm loving this gapless feature though). Has this happened to anyone else?
iMac in reality, MacBook Pro in fantasy! Mac OS X (10.4.7) I graduated high school! U of Michigan, here I come!

That's what i figured, so if played with tha for a while to see if that helped, and it still cuts off the last few seconds. I even repaired all 'broken' permissions and still no progress. And it seems to happen sporadicly... has this happened to anyone else?

IPod Touch 4G cuts off last few seconds of song.

My iPod touch cuts of the last few seconds of songs, the longer the song, the more is cut off. Think "Yes - Yours Is No Disgrace", lists the time as 9:40 in the playlist, but on the "now playing" screen is only 9:35. No problem in iTunes or my other 3 iPods with the same song. It's very consistent and always happens at the same place. "gapless album" setting makes no difference. I will try re-ripping the album with iTunes to see if that helps, but don't see why it should.

Resetting "almost" worked - the first time I played the song after resetting it showed 9:40 in the now playing screen, but ultimately it still cut off, and then when I restarted the song it again showed only 9:35. But thanks for the suggestion.
I re-ripped the album using iTunes, and it now plays fine. I am suspecting that the decoder used in the iPod touch is different from other iPods. Now I've got to go and re-rip all the albums that have the problem <groan>.

Last few seconds of stream cut off when recording a live stream

Hello,
I'm having a problem with recording a live webcam stream. The last few seconds of the stream is getting cut off.
The recording is stopped with the following piece of code:
            vid.attachCamera(null);
            vid.clear();
            ns.attachCamera(null);
            ns.attachAudio(null);
            ns.pause();
What could be causing this? Is the stream cut off too soon? Is the client unable to send buffered data to the server?
Kind regards,
FY

Thanks, I'll consider using ns.publish(false) . I've also managed to solve it using ns.close()
FY

So in the last few days I've noticed that pressing my volume change keys actually isn't changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squar

So in the last few days I’ve noticed that pressing my volume change keys actually isn’t changing the volume on my macbook pro at all. When I press the volume up or down keys, it makes the recognisable pop sound but stays at the same volume while the squares go up or down. I mute it but my computer still makes sound. It’s the same with the volume control up the top of the screen, too. I slide it up and down and it doesn’t change the volume at all. The only way I can change the volume is with my speakers or the program I’m in (iTunes, VLC etc). I restarted and it seems to be okay then I go to change it a couple minutes later and it’s back to not working again.
I’ve checked my settings- the “use all F1, F2, etc. keys as standard fuction keys” is not switched on, and I have tried a suggestion of moving the com.apple.systempreferences.plist file out of the library and onto the desktop and restarting and neither of those seem to make any difference whatsoever. I’ve tried to find online forums but the only suggestions I found were those two and they didn’t work.
I’m just annoyed because I usually have the worst luck with technology but my macbook had been going strong and I got it because of the apparent lack of things that could go wrong, but of course even if there is one thing that could go wrong it will happen to me.
Please help!

You migh give resetting your NVRAM a try:
http://support.apple.com/kb/ht1379

Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.ce.

Over the last few wks, i have lost several important file. Even the support team has not been able to recover them. Pls offer advice. I use microsoft office on my macbook pro, which is less than a year old.

pklfromarlington wrote:
Bob, Hate to steal your thunder but am hooked to an external hard drive using Time Machine and er information is where it shoudl be. Yes, I have combed the files, used Finder and any other tools I know.
You did not steal my thunder. You asked for advice, I provided advice. I assumed that since you nor the "support team" could find your files that you did not have any backup. You should have told us you do regular backups. We have no way to know otherwise unless you tell us.

The last few times I imported photos, the backup location was set to "documents" with no sub-folders. How do I get them into sub-folders - like year and month?

the last few times I imported photos, the backup location was set to "documents" with no sub-folders. How do I get them into sub-folders - like year and month?

Use the Subfolder pulldown to set the subfolders:

Importing creates pops & hisses at the last few seconds

Similar Messages

Maybe you are looking for