Importing home movies on dvd to imovie--no audio

A few years back I took all my home movies and put them on dvd's(thru some windows app), now once I imported them to imovie with these dvd's they don't have audio. It wouldn't let me import right to imovie, I had to go through disk utilities (new image capture) and the video is fine...just no audio. The audio is there when I play them on idvd. What did I do wrong or what's the best way to import these dvd's to imovie?

Welcome to the  Discussion Forums.
You can use something like mpegstreamclip (free) to convert the VOB files on the DVD to DV which will then import into im08 for you. You will also need the quicktime mpeg2 playback component plug-in (not free)

Similar Messages

  • Can't import home movie from DVD to iMovie HD

    I have recently had over an hour of old home movies without sound (Super 8mm, not video tape) professionally transferred to a DVD. The DVD was delivered in both VIDEO_TS (VOB) and in MPEG 2 formats.
    I am unable to import either of these formats into either iMovie HD or Final Cut Express. Each attempt results in an Error Message that file type is not supported or that QuickTime cannot parse it, Error -2048.
    I have also tried DVDxDV which generates a .mov file, but get the same error message.
    How can I get these analog-to-digital converted DVD files to import into iMovie/Final Cut Express so that I can edit and rearrange clip sequence?
    The video transfer firm has no answer to this problem either. (It works fine on their iMac G5 equipment running Final Cut Pro).

    I have also tried DVDxDV which generates a .mov file, but get the same error message.
    I'm surprised at that. Did you check out the DVDxDVD FAQ at http://www.dvdxdv.com/DVDxDV.faq.htm
    You might want to also look at ffmpegX at http://homepage.mac.com/major4/
    The ffmpegX installation and operating instructions could be a little clearer, but it works.
    BTW, when having film transfers made like that, find a place that will transfer to a miniDV tape. You will get maximum quality this way as DV compression is much lower than the MPG-2 compression on the DVDs you were given making DV a much better starting point.
    The video transfer firm has no answer to this problem either.
    It doesn't sound like a very "professional" place. A professional service would have suggested output to miniDV tape so you could easily edit the clips.

  • I'm not very techy, so be gentle! i am using midvd app to burn home movies to dvd from iMovie '11 version 9.0.9. It now burns the dvd but there is nothing on the disc. its not recognised by the iMac or any other dvd player.

    I was using midvd app(i never had idvd) to make home movies on dvd from imovie '11 version 9.0.9 with no problems before xmas 2013. ive just tried to make a new one today and it wont work.
    It seems to burn to the dvd (you can see a mark on the back of the dvd as if it has some info on it) but it wont play on imac (just says blank disc) or any other dvd player.
    I have tried reinstalling midvd app and also tried 2 other dvd creator apps and the same thing happens the app says its burning and the external superdrive whirs like its doing something but it wont play.
    The only thing i have done since xmas is all the updates to the operationg system and updated imovie (i didnt like the new version so went back to using the previous one)
    Any ideas - i am new to all things mac!

    When you export your movie from iMovie, are you choosing H.264? That is the only compression method supported by this miDVD. Youc an give this a try first:
    Use Share > Export to Quicktime > Movie to Quicktime Movie > choose Options and then make your choices in Settings, etc (you can choose whatever size your video is - mine was 720 HD at that time):
    If that does not work, I'd suggest going to their support site as they claim to be able to burn to DVD.... I just checked their site and here is their list of supported file types:
    http://shedworx.com/midvd-supported-file-types

  • How do I import an old home movie on DVD into iMovie with video_ts content and .vob files

    Hi, as a new mac user I would appreciate any help to use imovie to import an old home movie on DVD with movie_ts content and .vob

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion or later:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. (The same applies to Mountain Lion and Mavericks even though they have it preinstalled.) You don't have to install QuickTime 7.

  • Old Home Movies on DVD to iMovie

    I recently had old super 8 and 8mm family home movies (My parents wedding movie and family trips from the sixties) converted to a DVD by a local photo store. Unfortunately the scenes are not in the chronological order that I asked for plus there are some that I would like to delete altogether and burn a copy for my sister. I have tried to load this file into iMovie with no success. The file is called DVD.xml and there is also a VIDEO_TS folder and an AUDIO_TS folder. When I attempt to drag and drop the DVD file it gives me an error code that says:
    The file could not be imported: The file “Macintosh HD/Users/designer/Desktop/YesVideo/DVD.XML” can’t be imported; QuickTime couldn’t parse it: -2048.
    HELP. I really wanted to get these scenes in order on a new DVD and give copies to my sister and my aunts and uncles. Can it be done?
    Any and all help is appreciated.
    Bob
    G5   Mac OS X (10.4)  

    Hi Bob,
    sorry for being late.. who invented timezones anyhow?!
    very little to add to Sue's and Roy's advice...:
    step 1)
    convert the DVD into editable data... my website (see Sue's post) explains one method ... for sure, there are many other tools, claiming to help you:
    in recommended order ... :
    * DVDxDV (free trial, 25$, Pro: 90$)
    * Apple mpeg2 plugin (29$) + Streamclip (free)
    * Cinematize >60$
    * Mpeg2Works >25$ + Apple plug-in
    * Toast 6/7 allows converting to dv/insert dvd, hit apple-k
    * connect a miniDV Camcorder with analogue input to a DVD-player and transfer disk to tape/use as converter
    none of these apps override copyprotection mechanisms as on commercial dvds...
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
    ANY of these tools or methods convert the content of a DVD into another file format, called 'dv'.. which is iMovies native format....
    step 2)
    NOW you are allowed to import these converted fils into iM.. handle them as normal clips: edit them, arrange'em.. whatever...
    step 3)
    when you created the new project, you hopefully choosed 'Movies' as the folder... quit iM, launch iDVD, choose your project, create dvd...
    summary:
    dvd >> 'dv' >> iMovie >> iDVD ...
    ok?
    technical, there's a 'better' way by avoiding all these conversions, but this is no beginner's task (... hey, good idea for a new workshop on my site....) and some 'rare' tools are need ...
    if any questions - post here.. we can go down into detail... ;))

  • Home movies on DVD into iMovie for editing?

    I've had home movie video cassettes transferred onto DVD professionally and want to move them into iMovie so I can do edits and create new movies. The DVDs play fine but I can't figure out how to get them into iMovie so I can manipulate

    As Peter Joshua stated, Instant Handbrake will do the job and it is free, but you will have to check the settings to conserve the original quality because HandBrake is made to convert for iPod and will condense the movie. I have an app called Cinematize Pro, which is a perfect app for doing this. It is not free but conserves the full quality of the video and allows you to convert selected chapters or clips and not the whole DVD content.

  • How to transfer your home movie from DVD  to imovie for Editing?

    How to transfer home movie already on a DVD to IMOVIE for editing & enhancement.

    Simple idea-but not always easy. Get a dvd ripping program (or find a trialware version of one). Insert dvd. Rip DVD. save dvd as either DV or MP-4.Open with iMovie. Fiddle around,VLC might be helpful??
    John B

  • Re: How to import a home movie on DVD into iMovie for editing

    The tip above is ready to be posted.

    Complete instructions at [this link|http://discussions.apple.com/thread.jspa?threadID=2255575]

  • I have my home movies on DVD from Windows.  I am trying to import them into iMovie but it won't recognize the files.  The movies will play on my Mac but I can't seem to import them.

    I have my home movies on DVD burned from Windows and am trying to import them into iMovie.  The DVD will play on my Mac but I can't seem to import the movie.  Can anyone help?

    See my post here for how to do this.

  • How can I import home movies that were transferred to DVD into IM ?

    I had a service transfer old Super 8 and Reg 8 to DVD for me, and I transferred some old VHS home movies to DVD on a Pioneer DVD recorder. I would like to get these into IMovie to do some basic editing add titles and a soundtrack. (I just made the big jump from PC to Mac 2 weeks ago) I would greatly appreciate any input!
    Thanks

    get for 20$ the Apple mpeg2 plugin
    and for free the tool Streamclip for converting mp1/2/4, divx, avi, vob...
    (with that combo you can NOT override copyprotection mechanisms! ... )
    other tools are:
    * DVDxDV, it has a 30d trial period (testdrive sets a watermark)... and cost 25$
    * Cinematize >60$
    * Mpeg2Works >25$ + Apple plug-in
    http://danslagle.com/mac/iMovie/tips_tricks/6010.shtml
    http://danslagle.com/mac/iMovie/tips_tricks/6018.shtml
    or connect Your Camera to a DVD-player and copy to tape or import trough if Your Camera handles that...
    iMovie is a video edit app meant to work with firewire connected miniDV camcorders

  • How can I import a home movie from DVD

    I have a home movie on DVD I'd like to get in imovie...can this be done?

    You need to convert the VOB files in the TS-Folder of the DVD back to DV which iMovie is designed to handle. For that you need mpegStreamclip:
    http://www.squared5.com/svideo/mpeg-streamclip-mac.html
    which is free, but you must also have the  Apple mpeg2 plugin :
    http://store.apple.com/us/product/D2187Z/A/quicktime-mpeg-2-playback-component-f or-mac-os-x
    (unless you are running Lion in which case see below))
    which is a mere $20.
    Another possibility is to use DVDxDV:
    http://www.dvdxdv.com/NewFolderLookSite/Products/DVDxDV.overview.htm
    which costs $25.
    For the benefit of others who may read this thread:
    Obviously the foregoing only applies to DVDs you have made yourself, or other home-made DVDs that have been given to you. It will NOT work on copy-protected commercial DVDs, which in any case would be illegal.
    And from the TOU of these forums:
    Keep within the Law
    No material may be submitted that is intended to promote or commit an illegal act.
    Do not submit software or descriptions of processes that break or otherwise ‘work around’ digital rights management software or hardware. This includes conversations about ‘ripping’ DVDs or working around FairPlay software used on the iTunes Store.
    If you are running Lion:
    From the MPEG Streamclip homepage
    The installer of the MPEG-2 Playback Component may refuse to install the component in Lion. Apple states the component is unnecessary in Lion onwards, however MPEG Streamclip still needs it. See this:
    http://support.apple.com/kb/HT3381
    To install the component in Lion, please download MPEG Streamclip 1.9.3b7 beta above; inside the disk image you will find the Utility MPEG2 Component Lion: use it to install the MPEG-2 Playback Component in Lion. The original installer's disk image (QuickTimeMPEG2.dmg) is required.
    The current versions of MPEG Streamclip cannot take advantage of the built-in MPEG-2 functionality of Lion. For MPEG-2 files you still need to install the QuickTime MPEG-2 Playback Component, which is not preinstalled in Lion. You don't have to install QuickTime 7.

  • Importing home movies into itunes

    i know that you can import home movies from imovie into itunes and then import it onto your ipod, but im not sure on how you do that.

    Go to the "FIle" menu, select "Export", and select the iPod icon. Only works in iMovie 6.0 (iLife '06).

  • Help!! I can't get my new macbook to print with my Dell 155w OR burn a home movie to DVD

    I cannot get my very recently purchased macbook pro to burn a home video to dvd OR connect to my dell 155w printer. I bought a macbook because it was so highly recomended. But I don't want to keep replacing things. I am so frustrated. I wanted a macbook because of its reputation. But I can't seem to figure out anything. I'm dissapointed and thinking I will just return it.

    Your problem may be able to be solved but take this from a Long time Windows user and current Mac owner. Macs are not easier to use. Mac break down just as often as PCs, percentage wise as to how many are sold/produced.
    They use the exact same hardware as Win PCs.
    The learning curve for OS X is greater then for Windows.
    Not sure of the age of your printer but it may not be supported in the newest Mac OS, Lion.
    We would need a little more info on how you are trying to connect TO the printer. USB cable or Wirelessly.
    As far as burning a Home Movie to DVD. Apple use to supply a program called iDVD for this but with the introduction of Lion OS they stopped supplying that program. You could try another burning program. Try Burn or you could buy something like Toast (Burn is free).
    Personally I would return your Macbook Pro and stick to what you know with a good PC notebook.
    Apple has a 14 day No Questions Asked return policy for Full refund. Take advantage of that policy.

  • IDVD is not on my system and I cannot download it from the App store.  How Do I burn my home movies to DVD?

    iDVD is not in my macBook pro and I need an iDVD or a good program to burn my home movies on DVD with menus. I cannot download iDVD or any other professional programs like DVD Studioor ... from App store. Please help me how do I burn my short films to DVD? Also please tell me any other free programs alternate it for burn DVD with putting menus.

    Hi
    iDVD is not or never been free !
    there are up-dates but still You need the original iDVD v. 7.x.x to use them.
    Best of program - not sold by Apple any more but on Amazon or e-bay in boxed versions of iLife 11
    If there is no iDVD on Your Mac (and it's not on newer Macs as Apple discarded it) then You need a program that can do this.
    Your Mac can burn CDs and DVDs - BUT DVD as Data-DVDs not as Video-DVDs - they need a program to be encoded and STRUCTURED as such.
    • iDVD is part of the boxed version of iLife'11 and can only be bought outside Apple as on Amazon and e-bay
    • DVD Studio pro - Part of FinalCut Studio Pro bundle - this to has expired and can only be bought second handed. (High price and tough learning Curve - but best ever done.)
    • Roxio Toast™ - Not as elegant as iDVD - but has many other positive additions (I like it as 10-Pro incl BD-component) (now version 11)
    • Burn - only free alternative I know of on Internet. Very simple - Just for doing a plain Video-DVD
    Burn http://www.digital-digest.com/software/Burn.html
    only You can buy from Apple is
    • FinalCut Pro-X which also can burn to DVD but without any nice themes.
    AppleMan1958
    You can also buy Compressor from Apple for $50 US. It will also create DVD and BluRay but without the nice themes.
    Yours Bengt W

  • How to import videos MOV.MOD format to iMovie?

    how to import videos MOV.MOD format to iMovie?

    you haven't told us (yet).
    but you'll find an 'Import from camera' button in your old version too..

Maybe you are looking for

  • Class Not found exception in java concurrent program

    Hi All, I done java concurrent program as per steps given by oracle.I am getting class not exception when i am submitting that concurrent program.Can any body have faced this issue? Thanks JK

  • Adding DFF to table as an LOV field

    I am trying to add an LOV field as a new column to a table on an iAssets page. The new LOV field is a DFF. Using personalizations, I try to add an LOV field of messageLovtInput, to the table region of the page but I get a message: Unable to find comp

  • COMMAND column in V$SESSION just show s SELECT

    Hi, i queried command column in v$session, but it shows only 3(which is for SELECT) and 0 (which is for unknown), even i update some thing its not shown. Thanks

  • Image group duplication issue

    Im running aperture 2.1.3 with an all Aperture managed library. I have a problem where i have some images in a 'Project' which have 3 versions (one original, one Aperture adjustments, one Photoshop clipped version) When I moved these images into an '

  • Since I left my MBP in the hot car trunk things haven't been the same

    I would like to know if I have a hardware problem or a software problem. My first problem was some icons on the dock wern't responding, so I deleted then and replaced them. Then my trackpad didn't seem to do what I wanted it to do, so played with all