Importing parameters not available in Production system

Hi Experts,
I am facing an issue after moving my objects into Production system.
I have created a calss and which contains five methods. Each method contains itsown importing parameter. There is one method to send mail, which contains three importing Parameters. I have captured this class and the methods in a TR and basis team moved this TR into production system.
The TR has moved successfully into the production system. But when I checked the Parameters of the class SEND_EMAIL has only one importing parameter insted of three.
Again I created a new TR and captured all the objects related to Class, which contains class definition, methods etc.
I have moved it to quality system successfuly. When I checked in quality i can see the three importing parametrs in SEND_EMAIL method.
This TR has moved to Production successfully. When I checked in production I can see only one importing parameter in SEND_EMAIL method.
But it is showing same active version in Quality and Production.
Please suggest me how can I resolve this issue?
Thanks
Pradeep.

Dear Pradeep
First you check the parameter which u are sending that are already in prd server exist or not
some there are some thing we can see which are available in qua those are not seen in production
see in se06 and try to modify the exact component to modifaible state
check sp pack of qua and prd are one and the same
check kernal rel level in both
check chmod and chown are same in both
Regards

Similar Messages

Encore CS5: The software that's used to decode the media is not available on this system...

Hi guys, I am needing assistance with this matter. I have read up on similar threads (mostly commented on my Bill Hunt), but I fear I may be missing something. Can anyboy please assist me?
Here's the background:
OS: Windows 7 64-bit.
Video footage format: AVCHD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have been running CS4 Master collection for the past year and a half, with minimal hassles in encore (except for the early patch that needed to be downloaded and applied for some or other transcoding error in Encore CS4).
Right, so we bought the CS5 Master collection upgrade, and all applications are running great, except Encore. The moment I have completed editing my hour-long video in Premiere Pro CS5, I "send to Encore" via Dynamic Link. (This is the way I have been operating countless times in CS4. However now, in Encore CS5, the programme opens with all the regular project settings and saving dialogues, but the the moment it looks as though Encore is going get going, it stalls and doesnt respond, forcing me to close and try again.
So I tried the other way around. I restarted Encore, created a new project, in a new project folder, encore opens, and I chose to Import as "new timeline" selecting the Premiere project of choice. This time around, i don't get a crash out of Encore, instead I get the following message:
"The software that's used to decode the media is not available on this system.
Installing the correct decoders for the files you are working with may help to correct the problem."
So I googled the matter, and came up with Bill's response to the same problem (expect the date that it was posted was back in 2009). I am would desperately like to know if there is a solution, a patch, a workaround of some sorts that can help me get back to my usual workflow. I am pretty screwed without encore at this present moment, and the work is piling up. Can anybody help?
Many Thanks,
Matt

I am having the same problem however I end up having hardware error "Sense code 52102"
My video capture is similar to yours except I am using HD (Canon HNV model Legria HV40)
The process takes a long time and I have breaks in my recording to DVD and with no sound - once it completed after 40 hours.
I have wasted over 20 DVD's trying different things.
OS: Windows 7 64-bit.
Video footage format: HD 1440 X 1080 (1.333) 25fps, 48KHz
Photoshop Images: 1440 X 1080 (1.333)
I have not tried what you did buy opening up Encore and importing to new timeline , let me do that and see if I get the same message.

Adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem

Hi,
I got this message after importing about ten or so H.264 files that I encoded from Adobe media encoder. "adobe encore the software that's used to decode the media is not available on this system. installing the correct decoders for the file you are working with may help correct the problem."
The files we're shot with HD cameras. Edited in Premiere Pro CS3. I installed the update 3.0.1 with still the same error.
I also tried a brand new project and after about ten or so files being imported into a timeline, the system crash. I tried this twice....
    Thanks in Advance

Hi Hunt,
       Here is the skinny. A window base PC. footage shot with HD sony HD cameras, Project imported to Premiere CS3. Once completed sent file to Adobe media encoder and render them as H.264 widescreen high Quality. Imported them to Adobe Encore CS3. After about ten files or so. I got the error message. Did all the basic trouble shoot like restarting the computer, got latest patch. Even build a new test project with the same problem.
    Something else I read in the forums, is the encore will transcoded the project to Mpeg 2 anyway, after looking at my project I realized those few files were indeed untranscoded. So it will be a double compression and I dont want that. So, my new question is, what is H.264 good for ?????????? I was research that Mpeg 2 is a faster render but H.264 is a slower render but better quality.....
   what do you think ????
   Peter

Software used to decode the media not available on this system

"The software that's used to decode the media is not available on this system…" I get this error message when I try to import an H.264 video file (about 3.7 GB in size) into Encore CS6 to make a Blu-Ray. I've read the message threads about this problem but they don't seem to apply to my case. I'm using a recent Mac Pro Tower running OS 10.8.5. I made the H.264 file using Compressor 4 and a Matrox MX02 box using the Matrox encode setting for high-quality Blu-Ray. I've used this workflow a number of times before and never had any trouble importing the resulting files into Encore. I've tried starting a new Encore project and also re-doing the encoding of the H.264 file, without success. I've also experimented with importing other, recently made H.264 files into a new Encore project and these, as before, present no problems. I'm baffled!

I solved the problem and thought it might be helpful if I described the solution. The error message gave no indication of the nature of the problem, which was caused by a single clip in the Avid Media Composer timeline. This clip was an import from Photoshop, resized in Avid Media Composer. In height, the pixel dimensions of the Photoshop file were a bit more than 1080. I have no idea how this dimension survived rendering in Media Composer or H.264 encoding in Compressor using the Matrox MX02 box. But it evidently did. When I resized the image in Photoshop before importing it into Media Composer, then re-encoded the video as H.264, it imported normally as an asset into Encore.

The software that used to decode the media is not available on this system

I can see that this has been asked numerous times over the years. I am sorry to post this AGAIN, but I have not yet found a solution and have a deadline looming.
We created a 200+ DVD's using Encore CS6 on a Windows 7 system.
We upgraded to Windows 8. Re-installed CS6 Production Premium.
Now, when we try to open the projects to make a few edits, we get the "The software that's used to decode the media is not available on this system. Installing the correct decoders for the files you are working with may help to correct the problem."
I've done the Encore Updates. I've done the Media Encoder updates. I've "Run as Administrator".
I've tried re installing.
Does anyone have any suggestions on how to debug this? The videos are already transcoded as *.m2v files.
You'd think this would be easy... like install a codec or something.
==> Mike.

Part of the problem is that this is probably not a "logical" error. The common cause of this issue is still image files where the pixel size is too large. This suggests that Encore's (and other Adobe apps) ability to handle image size is exceeded without a better error message. The link, which I'm going to post until I find a "new" location (if one exists) is now a bad link:
http://helpx.adobe.com/encore/kb/error-software-used-decode-media.html
And in this example where it was not an image issue, the user fixed the problem by re-encoding the problem file.
http://forums.adobe.com/message/6004428#6004428

Import is not available all other actions are active but not import help?

Import is not available all other actions are active but not import help? I wish to import bookmarks from internet explorer, I am using windows 7

Make sure that you do not run Firefox in permanent Private Browsing mode.
*https://support.mozilla.com/kb/Private+Browsing
*You enter Private Browsing mode if you select: Tools > Options > Privacy > History: Firefox will: "Never Remember History"
*To see all History and Cookie settings, choose: Tools > Options > Privacy, choose the setting <b>Firefox will: Use custom settings for history</b>
* Deselect: [ ] "Permanent Private Browsing mode"

Promoted Organizational field in SCM is not available in Production

Hello All,
We have promoted a field in SCM to org level field. The org field is available in DEV and QAS when I checked in table USORG but the same org field is not available in production.
Please advice..
Thanks,
Masood

Perhaps you mean org field value?
How are you promoting the field? There is a good way and a bad way to do this.
It is also possible that the field is corrupted if someone made some direct changes in Production. I have seen this before in some roles.
Cheers,
Julius

Client is not available in the system

Hi Experts,
A quick help need. Few users on our client side are logging to portal. They go to Process Bid aplication of CCMS.
Here they are getting "Client is not available in the system" error. We have verified the portal and backend roles and every thing is fine. can you please suggest the solution.
Thnx in advance

Hi Vijay,
Pls check the system in which you have defined the client is correct.
Thanks
Anil

The currency translation type 0MEANDAILY is not available in the system

While executing certain queries for CRM Sales I am getting this error "The currency translation type 0MEANDAILY is not available in the system" I have looked and haven't found this info object in the Business content.
Any help?
Thanks
Arunava

Dinesh,
If I do a transfer Global setting from RSA1 on my CRM system there are four to choose from
1> Currency
2> unit of measurement
3> Fiscal year variant
4> Factory calander
Which should be chosen..?? for the 0MEANDAILY . From Anurag's post it's evident that this is a part of the BC and being an info object it's not populated by transferring Global data. Please explain
Anurag,
Can you please be a little more specific .. I am in the rsa1--> bc Then what.. How do I search? I searched against the infoobjects and this is not available
Thanks
Aruava

FF ID is not available in GRC system.

Hi All,
i have configured FF in GRC system and have dine following activities
1. maintain connection setting in SPRO.
2. created FF id in ECC system and assigned FF standard role.
3. run all necessary synchronization job.
4. assign owner.
but FF id is not available in GRC system.
can you you please help me.?

Hi Alessandro,
Thanks for your replay. please find my configuration in details.
1. Parmid 4000=1,
4010=SAP_GRAC_SPM_FFID
2. Maintain maintain connection SUPMG in SPRO > GRC > Common Connection Setting > Integration Framework > Maintain Connection Settings.
3. Create FFid in ECC DEV system.
4. assign role SAP_GRAC_SPM_FFID to FFid.
5. create FF id owner and FF id controller.
6.Run Syn.
but when want to assign controller to the FF ID then found FF is not available.

Getting error on imac at time of loading photoshop CS3 plugin - "One or more plugins currently not available on you system"

Hi,
I am getting below error message while loading photoshop plugin on intel mac os 10.5.7 in photoshop CS3.
"One or more plugins are currently not available on you system. For details, see Help -> System info"
In System info it is giving error as
"Plug-ins that failed to load:
Dissolve NO VERSION - - from the file “/Applications/Adobe CS3/Adobe Photoshop CS3/Plug-Ins/Filters/Dissolve.plugin/”
I have build this code with Xcode v3.0 & selected settings build configuration as "i386".
Is there any CS3 SDK updated need for intel mac or any build settings need to be done in xcode?
Same plugin is working well on emac, but giving above mentioned error on intel mac.
Please let me know if anyone have any idea about this.
Thanks in advance.

Sounds like a PiPL issue, can you show us your definition?

Getting error on imac at time of loading photoshop plugin - "One or more plugins currently not available on you system"

Hi,
I am getting below error message while loading photoshop plugin on intel mac os 10.5.7 in photoshop CS3.
"One or more plugins are currently not available on you system. For details, see Help -> System info"
In System info it is giving error as
"Plug-ins that failed to load:
Dissolve NO VERSION - - from the file “/Applications/Adobe CS3/Adobe Photoshop CS3/Plug-Ins/Filters/Dissolve.plugin/”
I have build this code with Xcode v3.0 & selected settings build configuration as "i386".
Is there any CS3 SDK updated need for intel mac or any build settings need to be done in xcode?
Same plugin is working well on emac, but giving above mentioned error on intel mac.
Please let me know if anyone have any idea about this.
Thanks in advance.

Thanks a lot for you suggetion.
2009/5/22 Ramón G Castañeda <[email protected]>
If you had been running CS3 on a PPC machine (PowerPC or pre-Intel box)
it's likely the plug-in was not written for Universal Binary.
>
Now that you have an Intel iMac, any plug-ins that have not been updated
for Universal Binary will not run, because your CS3 is now running natively
in Universal Binary.
>
In order to run your older plug-ins, you would have to run CS3 in Rosetta
emulation software—with a corresponding, MASSIVE performance hit..
Rosetta emulates the PPC chip. To set up CS3 to run in Rosetta, you
highlight the application icon in the Finder a do a Get Info on it (Command
I). check the Run in Rosetta box, close the dialog box, launch CS3 and
watch it crawl along.
>

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

I am using CS4. Can I open CS6 files? I am receiving "plug-ins not available on your system" messages and I'd like to open anyway but clicking on OK doesn't work.

InDesign CS4 can open .indd, .indt and .inx files from earlier versions, but not from later. It should, however, be able to open .idml files saved or exported from newer versions, with the understanding that unsupported features will be lost, text will probably reflow due to differences in texts engines between versions, and that the greater the gap between versions the more likely there are to be noticeable differences from the original. You will need to be sure CS4 is at version 7.0.6 to read the .idml.

Currency translation type 0CMCALDAY is not available in the system

Hi,
When I run the query, I am getting following error message
"Abort the currency translation type 0CMCALDAY is not available in the system"
I couldn't find 0cmcalday object in BC too. How can I install in this obj in BW??
Thanks,
SK

Problem solved
It is located under Currency Conversion types, in the BC

SICF Service not available in Production

Hi Experts,
I have created a Webdynpro application and I have moved it to quality and Production systems respectivelly.
In development and quality system it is working fine, but the same application in production gives a runtime error. It is showing SICF service is not available.
I have checked in SICF Tcode, but the service for the particular Webdynpro application is not available.
How can I resolve this issue.
Thanks,
Pradeep

Dear
you have to activate
/default_host/sap/public/bc/ur
/default_host/sap/public/bc/icons
/default_host/sap/public/bc/icons_rtl
/default_host/sap/public/bc/webicons
/default_host/sap/public/bc/pictograms
/default_host/sap/public/bc/webdynpro/* (ssr, mimes, etc.)
/default_host/sap/public/myssocntl
Active Services in SICF - Developing, Configuring, and Adapting Applications - SAP Library
Regards

Importing parameters not available in Production system

Similar Messages

Maybe you are looking for