Importing RAW images into iPhoto5

I'm trying to import RAW images taken by my Canon Powershot S45. It says it's an invalid file type or invalid data. However, if I use the Image Capture application, the pictures come out okay. Of course, I can't import those images to iPhoto.
Is there a way to get around this problem?

clearlynuts:
Welcome to the Apple Discussions. According to the iPhoto camera support page the S45 is not supported. You might do a search in this forum for S45 or Powershot S45 to see if you get any hits. It may be new and supported and you're just having a problem particular to you.
G4 DP-1G, 1.5G RAM, 22 Display, 2-80G HD, QT 7.0.3P   Mac OS X (10.4.3)   Canon S400, i850 & LIDE 50, Epson R200, 2G Nano

Similar Messages

  • Importing raw images into lightroom4 without automatically editing.

    when importing my raw images into lightroom4 they are automatically editing how do i change this?

    My guess is that you just don't understand how Lr4 (and every other raw converter) works.
    There is no such thing as viewing a raw file, only viewing the interpretation of a particular converter (of which your camera is the first raw converter to take a whack).
    It's time to learn how to edit with Lr4 - what you start with in Lightroom will *always* be different than your camera, or your manufacturer software, or any other raw converter...
    (assuming it's not an issue of inadvertently changed default settings or settings applied inadvertently upon import...).
    Note: because Lightroom does not take camera-specific things into account, the initial starting point is often less optimized than your camera or manufacturer's rendition (e.g. no luminance noise reduction is applied, active d-lighting is not taken into consideration...)
    PS - Lr4/PV2012 rocks - once you learn how to use it - it's the best!
    A couple of specifics:
    * Lr4 defaults to Adobe Standard (see Camera Calibration section in Develop Module), which tends to be run a little magenta-y, a little cyan-y, and a little bright. Consider a camera emulation profile, or try red (primary) hue +7 and blue (primary) hue +10 for portraits that use Adobe Standard (also camera calibration section). Also try pulling the lights slider left in the parametric tone curve. If you like this for some photo types, roll it into a custom profile using DNG profile editor (can even be precisely calibrated for your specific camera).
    * Lr4 includes a little contrast boost that is not represented by the tone curve (nor the contrast slider). If too much for portraits, try -contrast, or -highlights...
    Rob

  • Importing RAW images into iPhoto

    Hi there, I have a macbook with snow leopard running iPhoto 08 and it won't import RAW images from my new Canon T5i. Gets unrecognizable file format error. The T5i is on the Apple list of supported cameras for RAW imports and iPhoto 08 supports RAW (and I checked the RAW box in preferences). Any ideas? thanks!

    thanks so much, i spent hours trying to get an answer and this was my last shot! appreciate

  • Anybody had trouble importing raw images into Lr2.3 from a Nikon D5000?

    I get an error message that says "file not supported or damaged" when I try to import my D5000 raw images (.nef) into Lr 2.3

    Nikon D5000 was first supported by LR 2.4.
    Why don't you ugrade to LR 2.7 (it's free), if not LR3 (not so free ...)? Alternatively you can use Adobe DNG converter (5.4 or higher) to convert your NEFs to DNG and import them into LR2.3.
    Beat Gossweiler
    Switzerland

  • Importing Raw images into Krita

    I would like to try Krita for processing RAW images from my Nikon D60. Looked at the Krita manual (link below) and there should be an option to import Nikon NEF files but I dont see it in Krita. Do I need to install another package for this ? I already have graphicsmagick, libraw1394 installed.
    http://userbase.kde.org/Krita/Manual/ImportExport
    Also any tips or tutorials about using FOSS Linux bases software for HDR would be great.
    thanks
    Vikram

    n0dix wrote:I find the dcraw program, but not the lib.
    Here's ther response when I posted this in the KDE forums :
    http://forum.kde.org/viewtopic.php?f=139&t=85623
    Looks like they libkdcraw dependency is missing from the arch repos. I have send an email to Ronald VH (the arch package maintainer) just now. hopefully the library can be added to arch.

  • Importing raw images into Lightroom 3

    I have Lightroom 3 and I am unable to import my raw images from my Canon 60 D.  What do I need to do to fix this?

    Upgrade to Lightroom 3.6 (free for you since you already have Lightroom 3)

  • I am unable to import raw images into elements 11 camera raw from my panasonic lumix 200

    I am unable to import raw files to E11 from my Panasonic Lumix 200. I get a response that says "nothing imported - no supportive file types" also "can't complete request as file appears to be from a camera model which is not supported by installed version of Camera raw". I think I understand that I need at least a 7.2 version and don't know what I have.  The camera is a fairly recent model.

    I'm new to all of this and didn't know to look further down the menu. I started browsing under help and found how to register the product which I hadn't done and have been thinking that was the root of the problem. Turns out with your suggestion to get me started I was right - I hope, haven't tested it yet. I had 6.4 It is still running.
    Sent from my iPad

  • How do I import RAW images into elements 9

    Just purchased a computer with windows 8 & a pentax K-3 camera & loaded elements 9 & I can't import the photos I shot in RAW? How do I do this?

    The K-3 is a relatively new camera and Adobe only updates whatever the current Elements is with new camera support.  For you that is Elements 12 updated to use ACR 8.3 or newer.
    So buy a new Elements or you can use the DNG Converter to convert a folder of PEF files to DNGs with Adobe software and they should open is your older PSE9 ACR plug-in, provided that you set the Compatibility level old enough in the DNGC to match whatever ACR version PSE9 has.

  • Incorrect colors after importing a RAW image into LR

    I shoot in RAW mode using Canon EOS 400D.
    After importing RAW images into LR, EVERY image I shot gets oversaturated with green-yellow colors. If I open same image in C1 Pro colors look fine.
    If I change shooting mode on my camera to JPG (using sRGB color space) and import image into LR, colors look same as on RAW image in C1 Pro. All settings in LR and C1 Pro are set to default.
    My guess is that LR applies wrong (camera?) profile when it imports a RAW image. I don't think it's a difference in RAW converters, because the difference in colors is really huge.
    In the Camera Calibration panel I see ACR 3.6 profile selected and all settings are set to 0. Using sliders I can correct colors on image, but I failed to make a generic preset that could be applied on all imported RAW images.
    My monitor (Samsung 940BF) is setup to use manufacturer ICC profile. I tried to change it to sRGB or Adobe RGB, it doesn't help. I'm running Windows XP SP2.
    Any thoughts on how to return colors back to normal?
    Here are 2 examples of the same image converted by:
    1. LR
    [url=http://img263.imageshack.us/my.php?image=img1258lightroomsmallcp7.jpg][img]http://img 263.imageshack.us/img263/8411/img1258lightroomsmallcp7.th.jpg[/img][/url]
    2. C1 Pro
    [url=http://img156.imageshack.us/my.php?image=img1258captureonesmallcz2.jpg][img]http://im g156.imageshack.us/img156/9339/img1258captureonesmallcz2.th.jpg[/img][/url]

    Morey,
    there is no such options as "import settings into LR" you have to put the ACR-settings-file into the "~/Library/Adobe Lightroom/Develop Presets" folder (on a Mac). I think in the end its faster to just copy the numbers manually from ACR and save the preset from within LR.
    No, I don't think that calibrating has anything to do with profiles, at least not from what I understand as a profile (like sRGB or ProPhoto profile). It is kind of changing the stored default calibration values for a given camera type (something which one of course could also call a profile). It is definitive not like doing any double profiling or so.
    @Lee Jay,
    on different forums you can find values for ACR camera calibration of different cameras, googling should reveal some. Problem is that the numbers for the calibration change with the lens and, more important, there seems to be a lot of leeway regarding the behaviour of individual cameras of the same model. I found a lot of numbers on the net which didn't work with my D70, in the end I had to calibrate it myself. But your experience might differ, so I would suggest that you just have a look at what google offers.
    One last thing: You don't need to buy a PS version which is compatible with ACR 3.7 or 4.0. You can use the 30 day trial version of PS for this. Afterall you most probably only need to calibrate each camera once and I doubt that Adobe disapproves this use of a trial version as long as it helps to sell LR. ;-)
    Bye,
    Carsten

  • I'm trying to import RAW images from my new Fugifilm X-T1. iPhoto says the files are "unrecognizable".Any ideas?

    I'm trying to import RAW images into iPhoto from my Fugifilm X-T1 camera. I get a message saying the "file cannot be recognized". Any ideas ?

    Not necessarily.  Some  "glitches" were experienced by a significant number of users but not all of us, like the WiFi problem.  Those that experienced these issues did have a miserable time of it trying to get things right.  Personally I had no issues.  I did, however, boot into the Recovery volume after installing Yosemite and after each update to repair disk permissions and the disk.  There were a lot of permissions repaired each time.
    Remember millions have upgraded to Yosemite and the number of those having problems is probably a very, very small percentage of them.  That doesn't negate the problems they're having but sometimes overshadows the large percentage of those not having problems.  
    If you plan on upgrading to Yosemite do not run any "cleaning" or "optimizing" applications on your Mac or have any anti virus software installed.  Neither are necessary and are know to do more harm that good.

  • IMPORTING NEF (RAW) IMAGES INTO iPHOTO 6 FROM NIKON D80

    I have just got my self a Nikon D80 and find that I cannon import the NEF(RAW) images into iphoto6 - the files are not recognised - if I shoot in jpeg format it is fine
    Bit of a disappointment as I was really excited to see what the ophotos would come out like! I have not imported the software that came with the camera - but I didnt think that was necessary.
    Any help gratefully received

    David
    What kind of computer do you have? What version of the OS? What version of iPhoto? Have you applied the RAW updates from http://www.apple.com/support/downloads?
    Regards
    TD

  • Can't import Canon G12 RAW images into iPhoto 6.0.6

    unable to import Canon G12 RAW images into iPhoto 6.0.6 (Mac OS-X (10.5.8) - any ideas?

    You'll need to install the Digital Camera RAW Compatibility Update 3.5 - Search the Support/Downloads site for that.
    It still may not work. Iphoto 6 is an elderly piece of software now and predates your camera by several years. If it doesn't work you'll need to update to iPhoto 09 or later.
    Regards
    TD

  • I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import

    I cannot seem to load raw images into LR 2.5.  I've been using this for years.  I always load from memory card, but it gives me an unknown error message.  I tried to load from camera, hard drive, & external drive and still will not work.  I checked import menu and nothing has changed.  I loaded the photos onto my tablet and images are fine, so do not feel it is the memory card.  Any thoughts?

    The error message probably said "unsupported or damaged"
    The T3 requires Lightroom 3.4.1 or later. You can either upgrade to a more current version of Lightroom (version 5.6 is the most recent) or you can use the free Adobe DNG Converter to convert the RAWs to DNG, which should import into Lightroom properly.

  • I have a Canon EOS T2i Camera and I want to import the RAW images into Aperture.  How do I import them as RAW images instead of jpeg ?

    How do I import RAW images from my Canon EOS T2i camera into Aperture and have them show up as RAW images and not jpeg images?

    See the list of supported raw formats:
    http://www.apple.com/aperture/specs/raw.html
    The footnote ** for the cameras  EOS Rebel T2i EF-S / 550D / Kiss X4**  says, that the raw format is only supported with Aperture 3. So you will have to upgrade to Aperture 3, to be able to import the raw from from your camera.
    Regards
    Léonie

  • Imported RAW images are too dark

    I'm using Aperture2.0.1 and importing RAW images from a Canon 1D MkIII. All the images are coming in significantly darker than they show in the camera's display. The camera's histogram shows that the images are correctly exposed but they require boosting in Aperture's Exposure panel of anywhere from + 1.15 to 1.5 before they look right in Aperture. That's quite a hefty shift. I get a similar situation in Capture One Pro but the same images right off the card look bang on in Canon's Digital Photo Professional. In Adobe Lightroom it takes a shift of only +.5 to get into the right range. The exposure settings for the test were done with a Sekonic L-758DR meter and manually setting 3 580EX's but the problem shows up in all kinds of garden variety shots with or without flash. My preferred app is Aperture but I'm sick of having to adjust all my shots to get them into range.
    Is there something I'm missing here?
    Thanks,
    Geoff

    AMAZING!! Thanks for solving this mystery for me. Disabled the Highlight Priority and the shot comes into aperture looking like I it needs no adjustment. There are some clipped peaks in the histogram so there are some minor blown highlights. If I use Highlight Priority, it prevents the clipping and when I adjust the exposure level in Aperture the shot does look right without losing the highlight so Highlight Priority may be the right way to go when I'm shooting jewelry. But your post explains why the images were darkened.
    Thanks again,
    Geoff

Maybe you are looking for

  • Issue with IDOC_AAE in PI 7.31

    Hi,    i have a file - IDOC_AAE(Receiver) Scenario.We are using PI 7.31. When we are posting the file we are getting the below error: IDoc: Error before sending : IDocException com.sap.conn.idoc.IDocParseException: (7) IDOC_ERROR_PARSE_FAILURE: Inval

  • Assigning more than one G/L accounts to WRX

    Hi! I want to assign more than one G/L accounts to WRX, I knew that it can be done through general modification. I have defined like below: Valuation           General                   G/L accounts Modification        Modification IN     I01     240

  • Creating Adobe PDF on-line

    It is taking me hours to create Adobe PDF on-line and then to download the file. Why could this be happening? Joe Fleming

  • ERROR: schema.server.XxkocAstfHeadersEOImpl shud be declared abstract

    Dear Members, I have built a simple page in JDevloper and when tried to rebuild my project it gave me the below error: Error(17,8): class astf1.oracle.apps.ak.xxastf_h.schema.server.XxkocAstfHeadersEOImpl should be declared abstract; it does not defi

  • Need help restoring iTunes Library and iPhoto Library after re-install???

    some history, my 5 1/2 year old iMac started as Tiger, upgrade to Leopard and then to Snow Leopard...the latter being done after Snow Leopard came to market. Over a week ago I developed a Disk error that could not be fixed by the repair disk and ever