Importing video audio off

Hello,
I am using a Panasonic PV-GS320 as a camera and when I watch my tapes on the camera the audio is fine. I uploaded my first mini-dv tape and the audio is fine and then when I went to the second one (tape) the audio is delayed by about 5 seconds. How do I correct this?
Thanks
Jayson

did it

Similar Messages

  • I can't Import video&Audio file in photoshop cs6

    I can't Import video&Audio file in photoshop cs6
    And mytimeline is like Cs5

    NO!~ is CS6 i'm very sure

  • Multiple SWF import throwing audio off

    I created seven separate SWF files in Captivate 3 that I want to compile into one video.  I created the "player" shell with seven slides so I could insert the SWF file as an animation on each slide.  When I insert the initial two files, the audio plays correctly, however, when I insert any additional files, the audio for later SWFs is played instead.  All of the files are less than 5 MB, with most below 2 MB.
    I would appreciate any assistance.
    Thanks,
    Todd

    HarringtonTalents wrote:
    Is there a way to export a FCP movie with multiple audio tracks? Example: If i have 3 audio track of stems (voice, music, sfx) I would love for them to exist as say different channels in one file This way down the line, say I want to remove the music, i can just turn off the channel. Or import the FCP movie into a sequence and have the three audio track mono, rather than a stereo mix-down.
    I take it you're looking to export to a QT file, then yes, you can most definitely do just this. But first you need to setup your sequence correctly:
    With the right Timeline open, go to Sequence Settings, then select the Audio Outputs tab
    Change the output number from 2 to 4.
    Adjust the available tracks' Grouping from stereo to dual mono (Very important!) then close out of Sequence Settings
    Now - and this is the part I always forget - you'll need to actually route the tracks to those specific outputs. Right-click in the control area of the timeline (anywhere where you're not over a lozenge, lock or autoselect button) and make sure that the extra tracks (past 1-2) are routed to the correct output. That is, right click in the space to the left of A3 and in the shortcut menu, select Audio Outputs > 3. And so on.
    Now, when you attempt to Export > QuickTime Movie using Current Settings, you'll get a 4 channel QT file. Unfortunately you can't do an odd number of channels (like 3) but most folks who do this do 6 channels (stereo pairs for dialogue, music and effects).

  • How to remove first 7 seconds of imported video & audio files

    I've imported 2-hour audio & video files (edited in FCP, then taken to Compressor) into my DVDSP project.
    Can I now edit out the first 7 seconds of what I imported, before I burn the DVD? If so, how? (I want to remove a title that I should have removed originally in FCP, but didn't. Don't want to wait hours to re-compress the files.)

    There is no editing in DVD SP. If you want to edit out the first 7 seconds you will have to do that in FCP.
    An alternative is to put a chapter marker at the 7 second spot and then target that. The problems with this is that you might not be able to put the chapter marker on the exact frame you might want, and people can rewind and discover those 7 seconds.

  • Is there a way to import video/audio clips from Logitech webcam?

    I just purchased a used Logitech Quickcam Vision Pro for Mac. A Logitech driver is apparently not required. I connected it to a USB port on my mini. I couldn't find any way of downloading Photo Booth so I downloaded Funny Photographer (http://homepage.mac.com/spillnerclan/fabian/funnyphotographer/Funny%20Photograph er.html).
    With Funny Photographer I am able to capture still photos.
    Eventually, I intend using the webcam with Skype. In the meantime I would like to capture audio and video clips. This is not possible in iMovie6 (at least with a USB device). Is there a way to do this? Might Quicktime PRO work? Thanks.
    Owen

    Hi Owen,
    I don't know about QT Pro, but Snapz Pro X allows you to effortlessly record anything on your screen, saving it as a QuickTime® movie or...
    http://www.ambrosiasw.com/utilities/snapzprox/
    BTV allows you to view video from any video input source, either in a window or full screen on an entire monitor. Video can be captured to disk as a standard QuickTime movie file...
    http://www.bensoftware.com/btv/index.html

  • Flash video/audio player wont load in htm page

    Hi everyone,
    Im trying to use that neat new option in flash 8, import
    video/audio, im trying to add a player to this page but the player
    just wont load, i know the files and folders are in the correct
    place, im confused, can anyone help me understand why its not
    showing.
    it shows when i test view from my PC, but uploaded to my
    server the page doesnt work?
    I never have problems with flash normally.
    many thanks
    Tobes

    thanks man, ive fixed it now thats why you can see them,
    really apreciate you having a look tho, thats our new compilation
    CD coming out soon.
    if anyone is intersted, the problem was a mime setting on
    windows server 2003, you need to add a new MIME type in the IIS.
    Cheers

  • Importing 12bit Audio on 2 Channels

    Hope you can point me in a direction to correct the following issue.
    I am using a Canon XL2 and I would like to import two audio recordings into Premiere CS6. The audio recordings have been captured simulteneously using the front microphone. The second audio captured via a wireless microphone (mono). The audio set up in the Canon XL2 is set to 12bit CH1/2 CH3/4
    When importing via Capture on Premiere and subsequently import the video/audio file, the audio file info states - 3200Hz 16 Bit - 4 Stereo. When the clip is placed in the timeline, only one stero channel is imported. The mono chanel with the second audio channel has not been imported. I tried to moify the audio channel properties but with no success. In the past I imported a similar clip into Premiere CS5.5. This imported a similar clip into four seperate mono tracks.
    I am using a Mac version of Premiere CS6
    Any suggestions?
    Thanks for taking the time to read this post!

    Ok..think I have a solution without downloading additional software.
    When I upgraded to Premiere CS6, the previous version CS5.5 was retained on the imac hard drive.
    I opened CS5.5 and using this software's video/audio capture, I was successful in importing video/audio from my DV tape. I placed the captured video/audio clip  in the sequence timeline. This automatically converted the audio clip into to four audio channels. I then imported my sequence into Premiere CS6. The four mono audio channels were imported succesfully. Problem solved!
    Regards

  • FCP AVCHD import video too fast, audio off - help please

    Recently imported video from my Panasonic AVCHD HDC-SD100 into FCP, first time. I used Log and Transfer and I got all my clips imported. In the Log and Transfer window playback looks great, sounds great, everything fine - but once transferred to my browser my video is super fast making the audio and video out of sync, the audio is normal. I had to slow down my video speed to about 66% in order for it to match up (not perfect, but it works). Anyone have an idea of why my video is importing from Log and Transfer sped up? I would appreciate anyone's feedback. Thanks.

    hi.
    Sorry I can't help solving your problem, but you may do mine!
    tecs:
    FCP 5.0.4
    Panasonic HDC-SD100
    mac as seen below
    I do not get it done, to import vids at any way.
    Log and Transfer window tells me that there's no communication.
    but even befor that, I get a error message, saying the FCP can't load the "video-deck" (german! sorry!).
    so anyway....
    can you tell me what your settings are? like the exact configuration or the sequenze-, recording- and the device control-settings!!!
    I also couldn't figuare-out the difference of the camera-mod (when connecting to the mac) "PC connect" or "AVCHD connect". doesn't seem to make any difference in my case.
    So sorry for my spelling (no native!) and for the nubi-questions. but thats what I am...
    Your help would be great!
    Thanks!
    d.

  • .AVI video not importing correctly. Imports as audio only.

    System: window vista 64 bit
    Project type: whatever the standard new project is at the startup screen
    Problem: I am importing .avi video files and they are importing as audio only. it will not allow me to drag them into the video slot on the timeframe, and it displays only the speaker symbol in the media management area. Here's the funny bit. I used these files previously in another session June-July 2009, and they worked fine then. I am lost and need assistance!(PLEASE!!)
    Stumped Like a Chump

    If you look at the CODEC, it is Xvid, the opensource version of DivX, just as I suspected. These will almost never work in PrE. The best workflow is to go to before the Xvid compression (these are heavily compressed, loosing a ton of data and quality), or to convert them to DV-AVI Type II files with 48KHz 16-bit PCM/WAV Audio. I use DigitalMedia Converter, but it is shareware. Many users sing the praises of the free Prism to do the conversions. I have never used it, but many here have, and give it very high marks.
    Note: no conversion program can ever reclaim that lost data and quality. It is lost and gone forever. That is why my first option was to go back to before that compression was applied. However, conversion will yield files that can be edited with both Video and Audio.
    Good luck,
    Hunt
    [Edit] not sure why/how they were working before. Usually, with either the Xvid, or DivX CODEC's, one will get a Cannot Import error, or will get either Audio, or Video only. I have never been able to edit any Xvid, or DivX files, in either PrE, or PrPro - never even once. I just convert, if the client cannot get original source files, and I even have a quality loss diagram to show them how the footage will look - not very good, IMHO. I make them sign-off on that quality loss, before I start.
    Message was edited by: Bill Hunt - Added [Edit]

  • Help!  When I import video it only shows up as audio

    Every time I try importing video or even try previewing it, it will only playback and show up as audio. I have tried both Quicktime and AVI video formats and nothing seems to work. I have been able to import an audio only file with no problem, but I really need the video clips and I don't understand why they won't work. I tested them on my computer and they work with other programs. Is there a setting on Adobe Premiere Pro that I neeed to change, or am I just doing something wrong?

    Hi ya Jacob,
    For honor sake let me say that I hope you aren't downloading files to more or less steal them. I, for instance, have a sort of religious/philosophy channel at YT and I'll sometimes use short excerpts from movie clips for teaching purposes. I don't know if it's technically legal to do so, but no one seems to object to my using 30-seconds or so from a clip in this way.
    I'm sure there are people here who can tell you some easy way to do this with a program you have to pay for, but having grown up watching too much Jack Benny has made me a such a tightwad that I will always do things the cheap way even if it means jumping through a number of hoops. So let me tell you my process of hoop jumping before someone else tells you the easy store bought method (otherwise known as the "right way").
    There are a number of ways to get something off YouTube as you've no doubt learned by now. However, most of those ways will only download the low quality version of the file. YT also keeps high quality versions of many of those files (depending on what codec was used in uploading them to begin with) on a separate server. Sometimes a YT video will have an "HQ" button you can toggle to see the file. Sometimes they don't see it, but there is an HQ file somewhere anyway a lot of the time. To see that file place the following after the url:
    &fmt=18
    Here's an example. If you go to the following url it will take you to the regular low quality version of this particular YT video:
    http://www.youtube.com/watch?v=pVAZGNAxUNw
    Now you'll notice that there is indeed an HQ button you can push on this video to watch the high quality version, but let's pretend it isn't there and instead we'll use that little shortcut on the end of the url that I showed above so that the url now looks like this:
    http://www.youtube.com/watch?v=pVAZGNAxUNw&fmt=18
    No matter what download tool you use to get the video from YT, try to remember to use that shortcut ending piece for the url so the app will know without a doubt that you want the HQ version if one exists because sometimes these apps aren't able to find the HQ version without some help.
    I recommend downloading the free version of
    Any Video Converter. It will both download the YT video (the high quality version will be an mp4 file) and then it will convert it to something more usable of your choice.
    Another good download tool is called
    Orbit. It can download videos from other sites besides YT, but it always downloads the flv.
    Any Video Converter, unfortunately, won't let you change the file to an uncompressed AVI, nor to a DV-AVI. The highest quality it has available to convert the file to is NTSC mpg2 DVD standard, or you can choose to use the HD setting for a wmv file, but it takes a long time to do the latter, and considering the low quality of YT videos to begin with, seems kind of senseless to me.
    I then bring my new mpg2 file into the mpg version of
    VirtualDub and change it to an uncompressed AVI. And then I can easily bring that AVI into Premiere and either work with it natively or change it to a DV file (which I usually do before editing).
    There's a DV codec you can download that will allow VDub to convert the mpg2 directly to DV-AVI, but I don't trust it as I've noticed a lot of posts by people saying that it makes some of their other programs unstable.

  • I can't Import Video, Transitions & Audio From One Project To Another

    I've been working on this video all day and I’m finally in the home stretch but I've encountered my biggest problem yet. This is what I want to do. I have a series of clips, transitions, and separate music track in 1 open project and I want to transfer the whole kit and caboodle to another open project. For some reason when I do it only imports the video and some audio that's in track 1. I have tried locking audio clips to the video but it doesn't seem to be working. Can anyone help me!? I'm bleary eyed already I've been at this so long. Thanks!

    catspaw: Thanks for replying!!! I think I was unclear as to what my problem was. The way I work is to have one Master project open and I then import various clips from other secondary projects as I build my movie. I know . . . this might seem nutty it’s just how I work. The clips, sound and transition were from a separate project but they were only part of the main movie I was building in my Master Project. Am I making any since? Anyway, I couldn’t take it any more so I rolled up my sleeves and went 1 by 1 through the audio clips and lined them up by hand with the imported video. I know this must be almost INPOSSIBLE to understand the way I’m explaining it, sorry! Basically, though, for now, I’ve solved the problem. Thanks so much! I’ll post again when I have my next iMovie anxiety attack.

  • Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

    haben
    From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
    A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
    Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
    User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
    presets there for the QuickTime choice there.
    What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30)  or something else? Do you know if this camera is recording with a variable or
    a constant frame rate?
    Please review and consider and then we will decide what next.
    Thank you.
    ATR

  • Import video and audio from a dvd into FCP

    Is there an easier way to import video and audio into Final Cut Pro - I am playing it on a DVD player and making a digital tape of it. Then logging and capturing it into FCP.

    Hello and welcome to the forum!
    Yes, there are a few ways that are faster. Have a look at this thread http://discussions.apple.com/click.jspa?searchID=-1&messageID=3465691
    You could use software, such as "streamclip", or import by plugging your camera into your capture device and hooking your capture device into your computer and capturing by non-controllable device settings.
    Good Luck

  • Imported video from imovie, when i try to play only have audio, screen is red and flickering

    imported video from imovie, when i try to play only have audio, screen is red and flickering.  new mac pro.

    steved
    Thanks for the reply with additional details.
    In order to help you with the Elements Organizer 13 and Premiere Elements 13 issues, we need details of that video from iMovie.
    You should be able to get the important details of the iMovie video by telling us the export settings that you used for the iMovie export.
    Minimum information..
    Video Compression
    Audio Compression
    File Extension
    Frame Size
    First, update Premiere Elements 13 and Elements Organizer 13 each to the 13.1 Update (See Help Menu/Update in an opened
    Premiere Elements 13 project.)
    We will be watching for further details in order to plan and carry out troubleshooting strategy.
    Thank you.
    ATR.

  • Imported video into iMovie but has no audio

    Imported video into IMovie has the video but no audio. I did recently upgrade to OS lion and earlier video imports from snow leopard is fine

    I too have this problem, I cannot get any audio in my imported movies, this was not a problem two weeks ago, can anyone help me?

Maybe you are looking for