Importing video created in Premiere Elements into Muse

Ideally we should be able to work in one Adobe product and transfer the work product to another Adobe product. I love Muse, but I am unable to export a video created in Premiere Elements CS6 into Muse CS6. The problem is that there is no export option in PE to create an SWF file .... the only video file Muse seems to support. I hope in a future iteration of Muse, it will take FLV files or that PE will be able to export to an SWF flie.

Read up on how to manually embed video players such as jwplayer or whatever. Merely a mtter of downloading the player skins and copy&pasting the sample code.
Mylenium

Similar Messages

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Importing Videos To Adobe Premiere Elements 11 Only Shows Black Screen

Why is it Importing WMV Videos To Adobe Premiere Elements 11 Only Shows Black Screen.
Thank You In Advance

mrtomr4455
Forget about all the rest until you check out the Announcement at the top of this forum regarding the current 1/2 wmv display related to a recent Windows Update kb file. I missed the wmv part of your initial question by focusing too much on the thread title.
Here is a copy for your convenience
Announcement: Windows Update Causes Half of Display to Be Blacked Out
Hide Details
MicroSoft has issued an Update for Windows, that is causing problems with Displays. The following is from Talbot McInnis, who tracked down this problem, and offers a fix:
"MS bulliten MS13-057. Specifically, on XP kb2834904 and on windows 7 kb2803821 is causing a problem
For us, it occurs when decoding WMV9 files. Not all uses of WMV decoding are affected, but I confirmed that when connecting the WMV decode DLL to a sample grabber for RGB32 video, the frames arrive black on top, so that points directly to decoding internals of the WMV Decode dll.
You can uninstall these windows updates to resolve your problem."
There are several threads on the problem that this Update is causing on the PrE and PrPro Forums, so one can get more details. So far, there is not another fix from either MS, or Adobe.
Also, see this Adobe KB Article: http://helpx.adobe.com/premiere-pro/kb/wmv-files-corrupted-import-or.h tml
by Bill Hunt (Aug 2, 2013)
I think that is your answer. Please let us know if that worked for you.
Thanks.
ATR

How do I get continuous replay of a video created in Premiere Elements 13?

I created a video in Premiere elements 13 and I would like it to play continuously. Elements 10 had a specific marker that could be added to the end of the video and cause it to go back to the beginning. I don't know how to accomplish this in Elements 13.

Mortsphotos
Bottom line: I see no difference between 10 and 13 in what you may be asking about.
Please read the longer reply below, and then we can discuss this further.
Details
If you are talking about looping video....
I have never run into the looping feature that you attribute to Premiere Elements 10 Editor (or any other version).
Was this supposed to be a Premiere Elements 10 Editor Timeline content looping feature for viewing only within the project or a feature that allowed the export to loop without intervention of the player after the export?
For looping of files
a. find a repeat button on the player
b. repeat the Timeline content on the Timeline as many times as you want a repeat and then export the whole Timeline.
c. if you want to have a looping DVD-VIDEO on DVD disc, consider
ATR Premiere Elements Troubleshooting: PE: Looping DVD-VIDEO on DVD Disc
If you are talking about disc menu navigation of a disc menu...
I wonder if the above is really what you are asking about. Are you asking about placing stop markers at the end of a particular movie in a multi movie Timeline so that the viewer
selects one Timeline movie from a choice of many, the selected movie plays, and, when playback of that particular movie is finished, it returns the viewer to the main menu? For that
you put a stop marker at the end of the individual movies on the Timeline. You never put a stop marker at the end of the last item on the Timeline. Problems if you do.
Please review and consider. Please supply more details. And, then we will discuss this further. If you need clarification on anything that I have written, please do not hesitate to ask.
We can go at whatever pace that you want in the troubleshooting.
Thank you.
ATR

Can a video created in Premiere Elements 8 be edited in Premiere Elements 12?

I am having trouble with my Premiere Elements 8 freezing. I reloaded it onto the computer and it worked once and then froze again. So I was thinking about upgrading to PE 12. But I don't know how compatible the two programs are. Does anyone have a solution to my problem?

Churlin
Typically it is recommended that project created in one program be completed in that program. It is possible, but not guaranteed, that a Premiere Elements 8 Windows project will open in Premiere Elements 12 Windows.
But, remember, once a project from the earlier version is opened in a later one and edited, you cannot edit the older project that was edited in the later version. Best make a copy of the Premiere Elements 8 project and use that copy to determine if it will open in Premiere Elements 12. Remember keep the project source media with the project.prel file. Look at Project Archiver (Copy option) if necessary.
Troubleshooting Premiere Elements 8.0/8.0.1 would include
a. Do you have the automatic Background Rendering and AutoAnalzyer features turned off?
b. Do you have pile ups of previews, conformed video, and conformed auto?
c. What type of project do you have...project settings, properties of source media, types of edits?
d. Computer resources
and so on.
It is the problem confined to one project or all? How long has the problem existed?
More later.
Thanks.
ATR

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?

Can I import a menu from Premiere elements 7(the Popcorn menu) into Encore CS4?
If so how do I accomplish this act?
Are their additional menus available for Encore CS4?

The Menus in PrE are in Menu Sets. Each set is a Main Menu and a Scene Selection Menu. As PrE does the authoring semi-automatically, there are many "extras" in those PSD's, in the Button Layer Sets. All you have to do is make a Copy of your two Menus into a separate folder, so that you do not worry about messing up your Menu Sets in PrE. I'd do this in a new sub-folder in the Encore Library folder hierarchy. Then, Open each of these two Menus in PS. Go in and clean out all of the other languages for the Text and Button Text. Match the Layer Set/Button Layer Set names to those naming conventions in the Encore Library Menus, as you will not be getting any semi-automation. Where you do not need, say a Next Button, just eliminate that Button's Layer Set. Remember, PrE will do this semi-automatically, plus will give you the number of Scene Selection Menus, that your Project calls for - Encore will not. You must count the Scenes, divide by the number of Buttons on that Scene Selection Menu, and do Copies of that Menu, to accommodate what you require.
As for Encore, it comes with a full compliment of Menus, Buttons, and other Assets, like EM files (Templates), with Motion and Audio Assets. All can be completely customized in PS. Note: in PSElements, I do not believe that you can create Layer Sets, so that will be a limitation. The full PS has no limitations, with the single exception that to change Button Sub-picture Highlight colors, this must be done in Encore's Menu Editor, unless it's been added to PS CS5.
Good luck,
Hunt
PS - remember, work on Copies of the two Menus in the PrE Menu Set, and NOT on the originals, or you will be doing a Repair Install to get those back.

Video file is only imported as audio in premiere elements 11

I have been trying to import an .avi video file in premiere elements 11 but it is only imported as a sound file. According to gspot the codec (WMV3, WMP v9 (VC-1 Simple/Main)) is installed.
What can I do?

This is what gspot has to say about the file:
FILE_NAME
Wiehremarkt_01 VP1.avi
FILE_NAME_WITH_PATH
F:\Daten\Scanpath Videos\Wiehremarkt 19.09.2012\Wiehremarkt_01 VP1.avi
FILE_SIZE
4,022,001,664
CONT_AUDIO_STREAM_COUNT
1
CONT_BASETYPE
AVI(.AVI)
CONT_BYTES_MISSING
0
CONT_INTERLEAVE_ALIGN
CONT_INTERLEAVE_PRELOAD
CONT_INTERLEAVE_TIME
CONT_SUBTYPE
Multipart OpenDML AVI (4 parts),
CONT_TOTAL_BITRATE
0
VIDEO_ASPECT_CONVERT_AVI1
VIDEO_ASPECT_CONVERT_AVI2
VIDEO_ASPECT_CONVERT_CVD1
VIDEO_ASPECT_CONVERT_CVD2
VIDEO_ASPECT_CONVERT_DVD1
VIDEO_ASPECT_CONVERT_DVD2
VIDEO_ASPECT_CONVERT_SVCD1
VIDEO_ASPECT_CONVERT_SVCD2
VIDEO_ASPECT_CONVERT_VCD1
VIDEO_ASPECT_CONVERT_VCD2
VIDEO_ASPECT_SOURCE_MATCH
VIDEO_ASPECT_TYPE_NTSC
VIDEO_ASPECT_TYPE_PAL
VIDEO_BITRATE
11275
VIDEO_CODEC_NAME
WMP v9 (VC-1 Simple/Main)
VIDEO_CODEC_STATUS
Codec(s) are Installed
VIDEO_CODEC_TYPE
WMV3
VIDEO_DAR
1.333
VIDEO_DURATION
42:16.104
VIDEO_FIELDS_PER_SEC
VIDEO_FRAME_COUNT
60866
VIDEO_FRAMES_PER_SEC
24.000
VIDEO_H264
VIDEO_MPEG2
VIDEO_MPEG2_3X2
VIDEO_MPEG2_BFF
VIDEO_MPEG2_I_L
VIDEO_MPEG2_PPF
VIDEO_MPEG2_PROG
VIDEO_MPEG2_TFF
VIDEO_MPEG4
VIDEO_MPEG4_BVOP
VIDEO_MPEG4_GMC
VIDEO_MPEG4_NVOP
VIDEO_MPEG4_QPEL
VIDEO_PAR
1.000
VIDEO_PICS_PER_SEC
24.000
VIDEO_QF
0.382
VIDEO_SAR
1.333
VIDEO_SIZE_X
1280
VIDEO_SIZE_Y
960
AUDIO_BITRATE
1411
AUDIO_BITRATE_TYPE
AUDIO_CHANNEL_COUNT
2
AUDIO_CODEC
PCM Audio
AUDIO_CODEC_STATUS
No Codec Required
AUDIO_MPEG_STREAM_ID
AUDIO_MPEG_SUBSTREAM_ID
AUDIO_SAMPLE_RATE
44100

Can I back up individual image files to a slideshow DVD created in Premiere Elements 4.0?

I created a Premiere Elements 4.0 Project including 3 separate photo slideshows. The slideshows were created in Photoshop Elements 6.0 and imported into my Premiere Elements project. I was hoping that when burning the project to DVD, my image files would also be individually backed up.
When I give the DVD to family members I would like them to have access to the image files so they can print or use them individually. I would like to do this in 1 single DVD rather than giving them a DVD with the slideshows and a DVD with the image files. I was able to do this with a previous DVD authoring program I was using, but I cannot figure it out with Premiere Elements 4.0.
Any ideas if this is do-able with Premiere Elements 4? (I am running Windows Vista Home premium SP1 - 64bit - 3GB RAM)

Thanks for your help. I tried this. I burned the project to a folder (4.7GB) then to that folder I added a folder with my photos. So in the folder there was "Photos", "OpenDVD" and "Video_TS". I had 3 separate folders within the "Photos" folder, to keep the 3 slideshow photos grouped.
I burned the entire folder to a DVD using my burn tool. I don't even know the name of the software I used, but I think it was just the Toshiba burn tool. I dragged and dropped the folder into my new disc folder, then at the top of my screen clicked "burn to disc", I named the disc and chose from the formating options "Mastered: disc can be read on other computers and some CD/DVD... no new data can be added..."
Once burned I checked it on my DVD player and now it recognizes only the individual jpg files so it does a generic slideshow of these images rather than my slideshow project. (no menu, music...) Putting the disc in my computer I could access either the files or the slideshow project, but not on my home DVD player.
I burned the folders to 2 separate discs, once dragging the whole folder to the disc and once opening the folder and dragging only the individual folders to the disc.
Please tell me what I'm doing wrong. thanks.

How to import pdf files in Premiere Elements 8

Hello,
I'd like to know if there's a way to import pdf files in premiere elements 8, becouse if I try to import it in "project" it gives me an error saying "this type of file is not supported".
Thank you
Sebastian

Unfortunalty it's not working for me yet. If I try to import the PDF (single page) into the project, the progress bar reach 100% but then says: "the file is not supported, or the required codec is not installed". I have Acrobat Reader 9.3 installed too.
I've uploaded one of the PDF's that I want to use if you want to test it yourself:
http://www.megaupload.com/?d=YB7NT4QR
One of my coworkers says that I may need Adobe Bridge to do so, is that correct? Otherwise a simple "pdf to jpg" (or other image formats) could solve the problem.
Thanks for your support.
Sebastian

I couldn´t see imported videos with Adobe Premiere pro

Hello:
My name is Oren. I´m from Spain, and this is my problem.
One month ago I bought a Toshiba Satellite 850-31M. It has an x64 processor, 16 GB of RAM and I have 2 hard drives, the c: an SSD of 500 GB and other of 1 Tb hardisk, configured as D:. It has a GeForce GT 630M graphics card with 2 GB of RAM. W8 operating system.
I wanted to try the Adobe Premiere Pro CS6 and I downloaded the trial version. No problem, until I tried to import a video in the source window. Appears a small window that says "importing" and give to play in the source window and start .Audio be heard, but not the image. I've tried different video formats and always the same. The same video are seamlessly Quick Time and other video viewers ..... I do not know what to do, I think I've tried everything, even restart the computer to its factory settings and install Adobe Premiere vacuum and the problem remains. I tested with a trial of Premiere CS5.5 and got it. You hear the audio but no video . Insert the video in the timeline and recognizes it as such, even the first frame, but said, is not seeing in the "source", nor in the preview, only the audio.
What could it be? Am I you could lend a hand I'm desperate?
thank you very much

Hello:
I have the vídeos in a hard-disk. I'd tried in different video formats and
always the same. I hear the audio but I couldn't see the video image.
El jueves, 25 de abril de 2013, Jim Simon escribió:
Re: I couldn´t see imported videos with Adobe Premiere pro created by Jim
Simon <http://forums.adobe.com/people/JSS1138> in Premiere Pro - View
the full discussion <http://forums.adobe.com/message/5265806#5265806

Using U tube videos in Mac Premiere Elements 11

Can I download u tube videos to mac premiere elements 11 to use in a project that I am working on? If so, how do I do it?
Thanks.
barb

Barb
Mac or Windows or Premiere Elements 11 is not the question....
There are several software targeting video downloads from YouTube, I am told. BUT, last that I heard, none are considered legal for want of a better term. Last time I looked at this issue, the consensus was that the YouTube Agreement did not allow for this activity.
The following online article goes into fuller details on the matter.
http://www.pcadvisor.co.uk/how-to/internet/3420353/is-it-legal-download-youtube-videos/
ATR

Is it possible to import a title from Premiere Pro into AfterEffects?

Is it possible to import a title from Premiere Pro into AfterEffects?
AE CS6
PP CS6
Thank you,
Robert

You can render the title out of Premiere Pro as a movie and bring it into After Effects as a video file. Titles aren't automatically converted when you copy and paste from Premiere Pro to After Effects or use Dynamic Link to send something to After Effects.
You can submit feature requests here:
http://www.adobe.com/go/wish

I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it. I need the videos out of there. I have tried every way I can think of.

Like the title says...
I can't upload or import videos from my iphoto library, into final cut pro x. When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it. I need the videos out of there. I have tried every way I can think of.
I have also tried from the iphoto side, to export the videos or share them to final cut. I have had no luck.
I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible. I see this on forums and youtube videos of the older versions.
However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
Thank You for the Help

at the end, you say "import preferences", which program are you describing?
So im safer using footage that is remotely being pulled from iphoto...
vs
using footage that is imported into FCP from imovie?
Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

How do I import video from my iPhone 5S into iPhoto?

How do I import video from my iPhone 5S into iPhoto?

Connect the phone to the Mac and launch iPhoto. Select the videos in the import window and click import.

Can't import video from Canon GL-2 into new Macbook Pro

Can't import video from Canon GL-2 into new Macbook Pro
Using 9-4 pin cable and then using firewire 800 to thunderbolt adapter.

Does the MBP see the camera at all?

Importing video created in Premiere Elements into Muse

Similar Messages

Maybe you are looking for