Improve the audio comments quality in Acrobat X ? is that possible ?

Hi,
I work with large PDF documents in several languages and I need to add audio comments a lot. However, when I record them using the Audio Comment feature of Adobe Acrobat, I get extremely low files in size, and extremely bad quality in the recording.
My microphone is fantastic, and works nice with every computer application, so I am not having problems with the microphone or that stuff, it is clear that Adobe Acrobat is recording my voice to the lowest level of possible quality, and I want to change that. Even if my documents are a bit heavier, I would like to record my voice with better quality.
So the killer question is: How may I do this?
Thanks

There is no user control over the recording format for sound annotations.

Similar Messages

  • I would like to see the added keywords under the picture like iPhoto does it. Is that possible? I cannot find an answer

    I would like to see the added keywords under the picture like iPhoto does it. Is that possible? I cannot find an answer in Aperture 3.2.1

    Hello Wontolla, I meant the Aperture main menu, there is a sub menu "View", see the Screenshot:
    Set all flags in the Metadata Display submenu as I did,  to show Metadata in Viewer and Browser, and then select "Customize"
    Pick the Metadata fields you want to display for all views.
    Make sure, that "Contents -> Keywords" is checked.
    Regards
    Léonie

  • Is there a way to stream your video to your apple tv and the audio stays playing on your iPhone so that you can run and hear the movie through the headphones but watch on the tv?

    I want to be able to run on my treadmill and watch a movie on my apple tv but hear the audio through my headphones on my iphone.

    Welcome to the Apple Community.
    Unfortunately, that's not possible.

  • Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Maverick... is that possible? I read compatibility requirement of 10.6.8 or later...

    Hi! Just bought Snow leopard 10.6.3 and upgraded my 2008 iMAC; now want to use the free upgrade to Mavericks like I was advised in the Apple/Switch store... is that possible? I read compatibility requirement of 10.6.8 or later...???? Thanks for any guidance!

    Before installation you should back up all your data.
    When you have installed it, run Software Update to download and install the latest updates for Snow Leopard to bring it up to 10.6.8, or download the combo update from here:
    http://support.apple.com/kb/DL1399
    Check via Software Update whether any further updates are required, particularly to iTunes (you will need the latest version in order to synch with mobile devices).
    You should now see the App Store icon in iTunes, and you now need to set up your account:
    http://support.apple.com/kb/HT4479
    You can now upgrade to Mavericks OS 10.9 for free IF you have one of the following Macs, with not less than 2GB of RAM, and at least 8GB of available space on your hard drive:
    iMac (Mid-2007 or later)
    MacBook (13-inch Aluminum, Late 2008), (13-inch, Early 2009 or later)
    MacBook Pro (13-inch, Mid-2009 or later), (15-inch, Mid/Late 2007 or later), (17-inch, Late 2007 or later)
    MacBook Air (Late 2008 or later)
    Mac Mini (Early 2009 or later)
    Mac Pro (Early 2008 or later)
    Xserve (Early 2009)
    iCloud system requirements:
    http://support.apple.com/kb/ht4759
    If you cannot run Mavericks you can purchase the code to use to download Lion from the App Store (Lion requires an Intel-based Mac with a Core 2 Duo, i3, i5, i7 or Xeon processor and 2GB of RAM, running the latest version of Snow Leopard):
    http://store.apple.com/us/product/D6106Z/A/os-x-lion
    or Mountain Lion:
    http://store.apple.com/us/product/D6377Z/A/os-x-mountain-lion

  • How do i improve the Audio on my Mac Mini

    c to go Headphone Jack-->Soundblaster--> Tv-->5.1 reciever OR is it better to go USB Jack-->Soundblaster-->TV-->5.1 reciever
    thanks in advance
    mac mini   Mac OS X (10.4.7)   first mac ever
    mac mini   Mac OS X (10.4.7)   first mac ever

    you replied:
    Just to be clear, you have a new Intel-based Mac mini, correct?
    Yes,i got it in early July this year
    (The speaker outputs on the G4 Mac minis are different from the Intel ones.) The "headphone" port on the Intel-based Mac mini is both an analog as well as a digital optical port.
    Didnt know that,thanks
    There's no reason you couldn't go from your Mac directly to the 5.1 receiver.
    The reason I go Mac-->Tv--> reciever is because sometimes i may be doing a file late at night when others are sleeping and i can leave the reciever off and listen through the tv speakers
    What kinds of inputs does it have?
    I assume you mean the reciever One Optical for a dvd and a whole mess of RCA type line level,TV has R-L Audio and Video in and R-L Audio out
    Does it have a digital optical audio input? If so, you could leave the TV plugged in to the receiver with RCA cables and plug the Mac mini into the system with a digital optical audio cable.
    do you mean headphones out on Mini to optical in on reciever?
    ALSO............what i am driving at here is it almost sounds like the signal coming from the mini needs to be amplified a bit so sound adequate,I know in certain circumstances signals need to be antenuated or amplified
    My curiosity was whether or not the Mini had an output other than the headphone jack
    It's not clear to my why you have the "Soundblaster" device at all, what are you using it for? Does it have Mac drivers?
    Bought it for a windows PC about 6 years ago,now i have SIX computers
    One Mac Mini
    one Windows ME
    One Mandriva 2006 Linux
    One Mepis Linux Desktop
    One Mepis Linux Laptop
    One Palm Pilot
    I like experimenting with PCs,
    I didnt spend a whole lot,only bought 2 of them new The Mini and the Palm Pilot

  • Not satisfied with the audio/sound quality on my HP dv6 laptop.

    I want to know how to enhance the bass quality on my laptop because certain songs from my itunes library have alot of bass but i cant hear it when i listen to it from my laptop. I've talked to several people from the hp live chat but all they tell me to do is to go under sounds, then speakers&headphones properties, then to click enhancements and check off bass boost. But when i do that the bass just sounds distorted and all crackly. I was wondering if there was any other way to enhance the bass but make it so it sounds clear and not fuzzy. 

    Try this if the sound is distorting using headphones and speaker both .
    Click start button, type mmsys.cpl in the start search box and hit enter
    click sound tab.
    under sound scheme, select No Sound from the list and click OK,

  • Where is the Url for free Adobe Acrobat X Pro that will allow me to create PDF/X ‑1a requires all fonts to be embedded,

    Is there a free copy of Adobe Acrobat Pro that will allow me to create PDF/x‑1a with all requires all fonts to be embedded. I already have Adobe Acrobat Pro XI.

    The Standard joboptions that are used by default don't embed most so-called system fonts.
    Change your joboptions to High Quality Print and you will get Arial embedded plus much higher quality imagery.
    BTW, PDF/X is great (I'm actually Chair of the PDF/X standards committee), but PDF/X-1a created by using the PDF/X-1a joboptions ruins output by flattening transparency, yielding stitching and other image artifacts that you can see both on screen and print if your document has any transparency (including drop shadows, reflections, and even clipped images). It also forces all content to CMYK. PDF/X-4 is a better choice.
    What are you creating the PDF file from? Microsoft Office documents? Adobe layout programs such as InDesign?
    Let us know and we can give you a more focused recommendation as to what to do.
                - Dov

  • Is the video capture quality of Quicktime inferior to that of iMovie/FCPX?

    Hi, I currently have a Sony handycam I am using to convert Hi-8 tapes into a digital file. I am having a ton of trouble with iMovie/FCPX having issues with my timecodes inside the tapes. Therefore, I have resorted to using Quicktime player as a video capture software by choosing "New Movie Recording" under the "File" menu. However, I am curious how the quality would compare to that of iMovie/FCPX if they actually worked for me. Additionally, how might this compare to a windows AVI type capture software? The video capture currently in Quicktime takes up a lot of memory, at the tune of 56 GB per 2 hour tape. I have included a description of one of the files I saved. Any comments would be greatly appreciated, thanks!!

    See [this thread for some samples|http://discussions.apple.com/thread.jspa?threadID=2624128&tstart=25]

  • How can I get Firefox to show videos when I visit websites that have videos? None of the videos play or is visible, even though I can hear the audio. However, I don't have that problem when I use Internet Explorer.

    I'm using a PC with Windows 7 OS.

    Hi Marcos140,
    I would like to help, but is very hard to diagnose with so little information...
    Do you know why you needed the bridge in the first place?
    Is your laptop connecting via wireless or a wired connection?
    Please try this:
    #Click start
    #Type cmd
    # Push Enter
    #A black box will open
    # type in "ipconfig /all"
    # Screenshot the output
    # type "ping google.com"
    # Screenshot
    If you can post the output of those commands it will help.
    Thanks,
    Curtis

  • I'm getting a message that there is an error in the installer file for the 30 day trial of Acrobat Pro - Can that be fixed?

    I just tried to download - 3 times - 2 from I.E. 11 and 1 from Chrome - all get the same result that there is an error in the installer file.
    I'm not seeing any way to contact Adobe directly, only forums and this one seems closest to what might be helpful.  Thanks for any advice you can provide.

    use a different (wired) internet connection and/or a download manager.  you can also try dl'g from prodsigntools.com
    to dl from prodesign.com, go here:  http://prodesigntools.com/all-adobe-cs5-direct-download-links.html
    if you have a problem starting the download, you didn't follow all 7 steps, or your browser does not accept cookies. 
    the most common problem is caused by failing to meticulously follow steps 1,2 and/or 3 (which adds a cookie to your system enabling you to download the correct version from adobe.com). 
    failure to obtain that cookie results in an error page being displayed after clicking a link on prodesigntools.com or initiates the download of an incorrect (eg, current) version.

  • I want to create a new itunes account for myself and leave the current one for my wife. Is that possible?

    Ok. My wife uses itunes for her work and she has asked me to open my own account without erasing the one we currently have so that our music can be seperate. I have my own pc and sync to my own itunes program but our purchases still download to the same account and the money comes from the same account. Can I open a new account and not lose everything? Thanks!

    I hope this isn't too wordy but I want to be as clear and explicit as I can for you.
    You can't transfer purchases from one account to another account. Apple doesn't allow it.
    You can continue to use your daughter's Apple ID in order to continue to use the apps that you purchased with her ID and you will need to use her ID and password any time that you want to update those apps. What you do want to avoid is having to download any of those purchased apps again on any other devices - if you create a new Apple ID.
    If you create a new ID and then you sign into her ID in order to download a previous purchase-  you will lock yourself out of the new ID for 90 days and there is nothing that you can do about it. So as long as you do NOT download any past purchases with her ID - you will not lock yourself out of the new ID. So you can keep using the apps that were bought with her ID, you can also update those apps using her ID (you have to sign into her account in Settings>Store) but you can't download past purchases without messing things up with your new ID.
    When you download a past purchase with a different ID - you associate that device with the different ID for 90 days. This is one way that Apple hopes to cut down on pirating of apps - friends using other friends IDs in order to download apps without patting for them.
    This explains it in a little more detail.
    http://support.apple.com/kb/ht4627
    The bottom line is that you can create a new ID, still use her ID - judiciously - but you really want to avoid downloading past purchases with her ID. Transfer all of those purchases into iTunes so that if something happens and you need the purchased content again, you can just sync it again rather than downloading it.
    This explains transferring purchases.
    http://support.apple.com/kb/HT1848

  • I wanted to keep my locked screen display with the time and date from turning off is that possible

    So I enjoy my locked screen display with my chosen picture because it has the time displayed nice and big and its a cool nightlight but the locked screen display/wallpaper/time with date always goes black after 13ish seconds of locking it is there no way to let the locked screen stay on while charging? because it is awesome if it could stay on as a nightlight also so i dont have to press the lock button to see what time because the normal display is ugly am I just being super picky or am I not the only one who agrees or maybe it does exist im just stupid please respond when you can also thanks for reading much appreciated.

    wjosten wrote:
    Again, there is NO WAY to do what you asked: display the time constantly.
    I have a clock app that displays the time constantly on my iPad. I use it as a bedside clock. Many clock apps have the ability to disable autolock just within that app. Whether there is one that lets you pick your own background, I don't know but I wouldn't be surprised if there were, based on the number of clock apps out there. While what I'm suggestion is not precisely what the OP asked (display the system lock screen), it seems it might be a possible workaround.

  • How to improve the screen and audio quality on my Satellite c655-s5132

    I recently bought a used Satellite C655-S5132 laptop.  Although this machine is designed to run on Windows 7, it came equipped with Windows XP.  The machine runs OK except for the screen which shows a distorted image and the sound which is tinny and low volume. 
    I suspect this is due to a software shortcoming rather than a defect in any of the hardware.  The image distortion may be due to the fact that this laptop comes with a wide screen with an aspect ratio of 6:9, whereas the Windows XP operating system that is currently installed on this laptop is set at an aspect ratio of 4:3 and doesn't allow me to switch to the other aspect ratio.
    As a result, the image fills the entire screen but appears to be stretched horizontally.  As for the audio, I checked the volume settings and they are all set at their upper limit. 
    I have done the following:
    1.  I did a system check which shows that there are 2 drivers that need to be updated: video controller and video controller (VGA compatible).  But when I prompt the machine to install updated drivers it gives me a failure code 28 "device not installed properly".
    2. I ran 2 driver software programs: one shows that for both video controllers "the manufacturer is unknown" and "drivers are not installed", and the second shows that the driver is installed but needs to be updated.
    3. Searched the web for the right drivers and found that for this machine running on Windows XP (32 bit), Intel produces a graphic driver, GMA 4500.
    4. I tried to download this driver from the Intel website but the installation process failed. Perhaps it failed because Toshiba has specified a custom version of this graphic driver that can only be downloaded from its own website.
    5. I searched the Toshiba website but was unable to identify the drivers for sound and image for this machine.
    Could anyone help me find the right drivers on the Toshiba website that would allow me to: (i) change the setting for the aspect ratio and in doing so get rid of the image distortion, as well as improve the overal picture quality, and (ii) increase the audio volume and improve the overall sound quality?
    Thank you.

    Satellite C655-S5132
    Downloads here
    My advice is to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
    You can obtain recovery discs from Toshiba. Scroll down to Get Recovery Media here .
    For instructions, see the section Restoring from recovery DVDs/media, which begins on p. 71 of the User's Guide.
       Satellite L640/L650 Series User’s Guide
    -Jerry

  • Problem with audio quality using Record Audio Comment

    I am recording audio comments in Adobe Acrobat Professional using the "Record Audio Comment" tool. The sound quality is bad--very scratchy and has a noisy hum. I am using a good USB headset/microphone. Recordings outside of Acrobat are fine, e.g., in Audacity. I have tried two different microphones with both Acrobat 8 and 9 on two different computers (a desktop and a laptop) with similar results.
    I have not found an audio quality setting in Acrobat. Is there some way to improve the audio quality when recording comments? I suspect Acrobat is compressing the audio so much in order to save file size, however, the poor quality makes it almost unusable.
    Thanks in advance for any suggestions or advice. I know I can record outside of Acrobat and then add the pre-recorded audio as a comment, but that defeats the purpose.
    Bev

    Sorry to hear you are having problems. 
    A few things you can try: 
    1. Turning the volume of your TV up too high during a call can cause the kinds of audio problem you describe. Try turning the TV volume down and this should stop the 'feedback' problems you are having. 
    2. If you are using external speakers, then try switching these off and using the speakers built in to the TV. The TV was originally tested for Skype using the TV's internal speakers, so if you have a soundbar or other external speakers connected, the audio performance may suffer on Skype calls. 
    Best wishes

  • Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of th

    Hi. I use Adobe Acrobat XI pro to make a PDF ebook embedded with audio. It works really well on my computer-I can read the book and hear the auto play mp3. The problem is, when I send it to my customers, they have difficulty hearing the audio. A few of them say they have Flash player on their PC and somehow they still can't hear, some say their Google Chrome browser tells them they've already got one flash player while they try to download one. For me, I had to download two versions of Flash player to be able to access to the audio. I don't know what the problem is, is it because it's the latest version of Adobe Acrobat XI pro that people with older version of Adobe reader or flash player can't open it properly? Or is it something else? How can I make sure every customer with different system can access to my books? Hope to hear from you ASAP! Thank you very much.

    And how are the customers accessing the PDFs?
    What devices are they using?
    What program or apps with versions are they using?
    I this age of other then PDF eBooks formats and reader program and apss for computers and mobile devices for these formats I would look at creating the books in one or more of the eBook formats.
    Google Chrome and FireFox both have their own version of a PDF reader plug-in and they are well known to be less capable than Adobe Reader. It is possible to configure these products to use Adobe Reader.

Maybe you are looking for