? iMS 6.0 vs 6.1 and hot patches

If I have a server fatally crash and have iMS 6.0 with the 116568-56 patch installed., am I better off re-installing 6.0 and the patch or 6.1 and the patch? The patch says that it upgrades the mail server to 6.1 using the imsimta version command. Is the mail server really running 6.1 after the patch?
pat

what crashed was the job_controller. I have a ticket open and support is analyzing the cores. What my question still remains is am I better off running 6.1 or 6.0 with the latest patches. I worked for Sun years ago and I know that the two probably are not equal.
pat

Similar Messages

  • My mac is running slow and hot

    Macbook Pro 2010-2011 i forgot
    Mac OS X version 10.6.8
    Processor 2.66 GHz Intel Core 2 Duo
    Memory 4GB 1067 MHz DDR3
    My current problem which bother me is that 2 days ago i was watching tv series when suddenly my mac perform very slow and a bit hot.
    I tried to delete some video, file, etc because last time only 5GB left, but now already 70GB left in my harddisk, still not helping.
    please help. and this is my etrecheck result
    EtreCheck version: 1.9.15 (52)
    Report generated September 24, 2014 11:00:40 AM GMT+07:00
    Hardware Information: ?
      MacBook Pro (13-inch, Mid 2010) (Verified)
      MacBook Pro - model: MacBookPro7,1
      1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
      4 GB RAM
    Video Information: ?
      NVIDIA GeForce 320M - VRAM: 256 MB
      Color LCD 1280 x 800
      spdisplays_display_connector
    System Software: ?
      Mac OS X 10.6.8 (10K549) - Uptime: 0 days 1:18:35
    Disk Information: ?
      Hitachi HTS545032B9SA02 disk0 : (298.09 GB)
      S.M.A.R.T. Status: Verified
      - (disk0s1) <not mounted>: 200 MB
      Macintosh HD (disk0s2) / [Startup]: 297.77 GB (138.93 GB free)
      MATSHITADVD-R   UJ-898
    USB Information: ?
      Apple Inc. Built-in iSight
      Apple Internal Memory Card Reader
      Apple Inc. BRCM2046 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Computer, Inc. IR Receiver
      Apple Inc. Apple Internal Keyboard / Trackpad
    Kernel Extensions: ?
      [not loaded] com.seagate.driver.PowSecDriverCore (5.2.2 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_4 (5.2.2 - SDK 10.4) Support
      [not loaded] com.seagate.driver.PowSecLeafDriver_10_5 (5.2.2 - SDK 10.5) Support
      [not loaded] com.seagate.driver.SeagateDriveIcons (5.2.2 - SDK 10.4) Support
    Problem System Launch Daemons: ?
      [running] com.seagate.TBDecorator.plist Support
    Problem System Launch Agents: ?
      [loaded] com.paragon.NTFS.notify.plist Support
      [running] com.paragon.NTFS.vendor.plist Support
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.tunnelbear.mac.tbeard.plist Support
    Launch Agents: ?
      [running] com.seagate.SeagateStorageGauge.plist Support
    User Launch Agents: ?
      [loaded] com.BlueStacks.AppPlayer.LogRotator.plist Support
      [loaded] com.BlueStacks.AppPlayer.Service.plist Support
      [loaded] com.BlueStacks.AppPlayer.UninstallAgent.plist Support
      [loaded] com.BlueStacks.AppPlayer.UpdaterAgent.plist Support
      [running] com.spotify.webhelper.plist Support
      [running] com.zeobit.MacKeeper.Helper.plist Support
    User Login Items: ?
      iTunesHelper
    Internet Plug-ins: ?
      OfficeLiveBrowserPlugin: Version: 12.2.0 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      iPhotoPhotocast: Version: 7.0
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      JavaAppletPlugin: Version: 13.9.8 - SDK 10.6 Check version
      QuickTime Plugin: Version: 7.6.6
    Safari Extensions: ?
      Omnibar (Disabled)
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.2
    User Internet Plug-ins ?
      BlueStacks Install Detector: Version: 0.3.6 - SDK 10.7 Support
    3rd Party Preference Panes: ?
      Flash Player  Support
      Paragon NTFS for Mac ® OS X  Support
    Time Machine: ?
      Time Machine information requires OS X 10.7 "Lion" or later.
    Top Processes by CPU: ?
          4% WindowServer
          1% WebProcess
          0% fontd
          0% SystemUIServer
          0% coreservicesd
    Top Processes by Memory: ?
      246 MB WebProcess
      106 MB Safari
      61 MB mds
      57 MB WindowServer
      57 MB firefox-bin
    Virtual Memory Information: ?
      2.06 GB Free RAM
      848 MB Active RAM
      441 MB Inactive RAM
      445 MB Wired RAM
      467 MB Page-ins
      0 B Page-outs

    Hi,
    My MacBook started running extremely slow and hot a couple of days ago. I tried to search for help and found this forum where people had the same problem. people are advised to check with etrecheck software and post the results, So I did mine and below are my results. I hoping someone could help me out. Thanks a lot in advance.
    EtreCheck version: 1.9.15 (52)
    Report generated October 1, 2014 at 10:37:30 PM EDT
    Hardware Information: ?
      MacBook (13-inch, Mid 2010) (Verified)
      MacBook - model: MacBook7,1
      1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
      2 GB RAM
    Video Information: ?
      NVIDIA GeForce 320M - VRAM: 256 MB
      Color LCD 1280 x 800
    System Software: ?
      OS X 10.9.4 (13E28) - Uptime: 0 days 3:28:46
    Disk Information: ?
      Hitachi HTS545025B9SA02 disk0 : (250.06 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted>: 209.7 MB
      disk0s2 (disk0s2) <not mounted>: 249.2 GB
      Recovery HD (disk0s3) <not mounted>: 650 MB
      OPTIARC DVD RW AD-5970H 
    USB Information: ?
      Apple Inc. Built-in iSight
      Apple Inc. BRCM2070 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
    Gatekeeper: ?
      Mac App Store and identified developers
    Kernel Extensions: ?
      [loaded] com.dvdfab.kext.fabio (1) Support
      [loaded] com.squirrels.airparrot.framebuffer (3 - SDK 10.8) Support
      [loaded] com.squirrels.driver.AirParrotSpeakers (1.8 - SDK 10.8) Support
      [not loaded] com.wdc.driver.1394HP (1.0.7) Support
      [not loaded] com.wdc.driver.USBHP (1.0.6) Support
    Startup Items: ?
      Jaksta: Path: /Library/StartupItems/Jaksta
    Launch Daemons: ?
      [loaded] com.adobe.fpsaud.plist Support
      [invalid] com.mcafee.ssm.ScanFactory.plist
      [invalid] com.mcafee.ssm.ScanManager.plist
      [running] com.mcafee.virusscan.fmpd.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [loaded] com.oracle.java.JavaUpdateHelper.plist Support
      [loaded] jp.co.canon.MasterInstaller.plist Support
    Launch Agents: ?
      [running] com.mcafee.menulet.plist Support
      [running] com.mcafee.reporter.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    User Launch Agents: ?
      [loaded] com.adobe.ARM.[...].plist Support
      [loaded] com.divx.agent.postinstall.plist Support
      [loaded] com.google.GoogleContactSyncAgent.plist Support
      [loaded] jp.co.canon.Inkjet_Extended_Survey_Agent.plist Support
    User Login Items: ?
      Safari
      iTunesHelper
      BitTorrent
      uTorrent
      Canon IJ Network Scanner Selector EX
    Internet Plug-ins: ?
      Default Browser: Version: 537 - SDK 10.9
      AdobePDFViewerNPAPI: Version: 10.1.10 Support
      FlashPlayer-10.6: Version: 15.0.0.152 - SDK 10.6 Support
      DivXBrowserPlugin: Version: 2.2 Support
      Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.152 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      iPhotoPhotocast: Version: 7.0 - SDK 10.8
      SharePointBrowserPlugin: Version: 14.4.1 - SDK 10.6 Support
      AdobePDFViewer: Version: 10.1.10 Support
      SiteAdvisor: Version: 2.0 - SDK 10.5 Support
      GarminGPSControl: Version: 3.0.1.0 Release - SDK 10.4 Support
      EPPEX Plugin: Version: 10.0 Support
      JavaAppletPlugin: Version: Java 7 Update 67 Check version
    Safari Extensions: ?
      SiteAdvisor
      Add To Amazon Wish List
      AdBlock-2
    Audio Plug-ins: ?
      BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
      AirPlay: Version: 2.0 - SDK 10.9
      AppleAVBAudio: Version: 203.2 - SDK 10.9
      iSightAudio: Version: 7.7.3 - SDK 10.9
    iTunes Plug-ins: ?
      Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
    3rd Party Preference Panes: ?
      Flash Player  Support
      Java  Support
      MacFUSE  Support
    Time Machine: ?
      Skip System Files: NO
      Mobile backups: OFF
      Auto backup: NO - Auto backup turned off
      Volumes being backed up:
      Destinations:
      KINGSTON [Local] (Last used)
      Total size: 0 B
      Total number of backups: (null)
      Size of backup disk: Excellent
      Backup size 0 B > (Disk size 0 B X 3)
      Time Machine details may not be accurate.
      All volumes being backed up may not be listed.
    Top Processes by CPU: ?
          2% WindowServer
          1% softwareupdated
          0% SystemUIServer
          0% notifyd
          0% appProtd
    Top Processes by Memory: ?
      164 MB Safari
      84 MB softwareupdated
      80 MB VShieldScanner
      66 MB com.apple.WebKit.WebContent
      55 MB mds
    Virtual Memory Information: ?
      26 MB Free RAM
      671 MB Active RAM
      652 MB Inactive RAM
      389 MB Wired RAM
      900 MB Page-ins
      11 MB Page-outs

  • Service packs and hot fixes for  BusinessObjects Enterprise XI 3.1

    Hello Experts.
    Which is the cronology or order of the service packs and hot fixes for  BusinessObjects Enterprise XI 3.1, or which are tha latest?
    thanks

    For BO XI 3.1, SP 5 is the latest, released in August 2011. You can directly install SP5 if you already have SP3 installed.
    Previous Service Pack is 4.0 and Fix Pack 4.1.

  • After upgrading my iPad 2 is slow and hot, is the a solution?

    My Ipad 2 is very slow, and hot never have this....is their a solution?

    I upgraded my iPad 2 to iOS 6 as soon as it was available, and, since the upgrade, I've noticed a significant increase in the rate of battery drain. I charged my iPad overnight last night, and it was 100% charged when I started using it this morning. I made sure that Location Service and Bluetooth radio were off. I used it to web browse, compose an email, and read a PDF document. I used it for about four hours continuously, and the battery was down to 50%. That is draining the battery much faster than before the OS upgrade. Unfortunately, I did not backup the iPad before upgrading. I did the upgrade over WiFi. The PC on which I have iTunes died, and I don't have a replacement machine on which to back it up yet. If I had a good backup, I'd restore it and forget about this upgrade until there's a fix for the battery problem, if there ever is one. I'm glad I waited to upgrade my iPhone 4S. I rely on it more and don't want to deal with rapid battery drain on it. I upgraded to the iPhone 4S from the 3GS. My 3GS was rendered almost useless when I upgraded to iOS 5 when it came out and caused rapid battery drain on the phone, which Apple never fixed. Also the performance of the 3GS with iOS5 was so slow I could hardly stand using it for anything. That experience led to my decision to wait on upgrading my 4S to iOS 6. It's unfortunate that such a great family of products is plagued with this battery drain problem, and with all their resources, Apple cannot or will not fix the problem. As far as I know, they have not even acknowledged a battery drain problem with iOS 6. To me, the battery drain problem is much worse than the problems with the mapping software that Apple is using to replace Google Maps in iOS 6. Rather than apologizing, I would like for Apple to acknowledge the battery drain problem and fix it.

  • Palm Desktop 6.2 with drivers and hot sync will not install

    My new computer has dual quad core processors (8 processors), 8 GB RAM, Vista Ultimate 64 bit. 
    The Palm Desktop and Hot Sync manager will not load because the New Hardware Wizard cannot find the drivers for the Palm Centro even when I point the wizard to C:/Program Files (X86)/Palm/USB-drivers.
    Is the Palm Desktop software compatible with Vista Ultimate 64 bit?
    The software loads just fine and operates well on my quad core,2GB RAM, Vista Home Premium 32 bit.
    Post relates to: Centro (Sprint)

    rsmilski wrote:
    I have a Core 2 Duo CPU - I have a dual core, no?  I keep running into failed installs of HotSync. 
    Is there a way of installing Hotsync using Bluetooth?
    Thanks
    Post relates to 700p (Bell)
    Post relates to: Palm m125
    Please see Palm's instructions for syncing via Bluetooth.  This article is for a Centro, but should be similar to your 700p.
    http://kb.palm.com/SRVS/nua/launchKB.asp?c=49229
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?

    Does Lion 10.7.1 fix problems with fan noise and hot in Air 2008 Model?
    I´ve installed a week ago but i downgraded to SL again. My CPU was hotter and high rpm fan eve in idle state.
    Does fix 10.7.1 this issues?
    I´ve got first generation macbook air, 2gb ram, ssd 60gb .

    Simply NO, we´re still waiting....

  • Macbook pro 10.7.5 fan running fast and hot

    Recently (past 2 weeks) my macbook pro (just over 1 yr old) 10.7.5 fan has been running fast and hot. It begins after uploading photo's into iPhoto '11. Sometimes it takes 30 minutes for it to cool down and run at normal speed. Uploads are usually 50 to 200 images. I verified the Activity Monitor CPU % and nothing exceeds 12%.
    I did a restart twice this week which seems to be a temporary solution. Any tips to resolve this is appreciated.
    Happens when running iPhoto is only app open.

    When you were checking Activity Monitor, did you select "All Processes" from the drop down list at the top

  • My usb port not work and hot usb port aria please help me

    my usb port not work and hot usb port aria please help me

    Hi
    Please find the link givenbelow might help you to fix your issue.
    USB Device Troubleshooting
    Fix Windows 7 “USB Device Not Recognized” Error
    Let us know how it goes!
    "I work for HP."
    ****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    Regards
    Manjunath

  • OpenSolaris - Difference between hot swapping and hot plugging?

    Hello,
    I would like to know the difference between hot swapping and hot plugging on
    OpenSolaris. I wonder if someone could please help?
    Thank you,
    Akino

    Hi,
    Try saying "hot repair" and "hot upgrade" instead. And then think about all the actions you need to perform to do what you want to do (replace a failed component vs add a new component).
    Write if you have questions.
    Kirill Babeyev

  • SAP New and Hot Topics

    Hi Gurus,
               Currently i am working in ABAP and i planned to learn new and hot SAP topics.
    Could you please suggest me which one has gud future to be learned.
    Regards,
    Ashok...

    hI Ashok
    try to learn OOPS concept in abap.
    and cross applications , business information warrehousing, enterprese portal and business documents(Bdocs)
    reward points to all helpful answers
    kiran.M

  • Difference betwen RMAN,COLD and HOT backup

    Hi Experts,
    I have faces some interview question .
    what is difference between COLD and HOT backup ?
    what is difference between RMAN, COLD and HOT backup?

    You mean the following,
    Mark the beginning of the online tablespace backup.
    SQL> ALTER TABLESPACE users BEGIN BACKUP;
    Back up the online datafiles of the online tablespace with operating system commands. For UNIX:
    % cp /oracle/oradata/trgt/users01.dbf /d2/users01_'date "+%m_%d_%y"'.dbf
    After backing up the datafiles of the online tablespace, run the SQL statement ALTER TABLESPACE with the END BACKUP option.
    SQL> ALTER TABLESPACE users END BACKUP;
    Please visit here for more details:
    Making User-Managed Backups of Online Read/Write Tablespaces
    http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/osbackup004.htm#sthref1489
    Adith

  • Fan loud and hot

    My Mac pro started running loud and hot after upgrading to osx 10.8.4 and moving to icloud. Tried suggestions posted w/no luck. Pls help as no longer want to use it!

    Open Activity Monitor, select All Processes instead of My Processes, then order the processes by CPU. Post an image of what processes are using the most CPU and how much. Also, do an SMC reset.

  • Gwdca.exe - Entry Point Not Found Error With Hot Patch 4

    We've upgraded a few of our GroupWise 8 clients from 8.0.3 Hot Patch 3 to 8.0.3 Hot Patch 4 to address the critical security vulnerability in HP3. We receive the following error message (attached) every few minutes which seems to be related to the archving process.
    Receiving gwdca.exe - entry point not found
    The procedure entry point DAGetLinkedObjectParent could not be located in the dnyamic link library sccda.dll
    When the error appears, it seems to correlate to the "Updating Archive Quickfinder Indexes" appearing in the bottom left corner of the GW client. Backreving the client to 8.0.3 HP 3 resolves the problem. We have tried running GW Check on the mailbox as well as forcing a reindex of the archive without any success. Any insight would be appreciated.
    Thanks
    Josh

    Originally Posted by joshbilsky
    We've upgraded a few of our GroupWise 8 clients from 8.0.3 Hot Patch 3 to 8.0.3 Hot Patch 4 to address the critical security vulnerability in HP3. We receive the following error message (attached) every few minutes which seems to be related to the archving process.
    Receiving gwdca.exe - entry point not found
    The procedure entry point DAGetLinkedObjectParent could not be located in the dnyamic link library sccda.dll
    When the error appears, it seems to correlate to the "Updating Archive Quickfinder Indexes" appearing in the bottom left corner of the GW client. Backreving the client to 8.0.3 HP 3 resolves the problem. We have tried running GW Check on the mailbox as well as forcing a reindex of the archive without any success. Any insight would be appreciated.
    Thanks
    Josh
    Duplicated and reported as defect #902940.

  • How to know  the patch is hot patch or cold??

    Hi Everybody,
    how to know an application patch can be applied as a hot patch. because read me file of a patch does not describe it all the time.
    r there any methods of finding a patch as a hot patch!!!!!
    Oracle Apps : R12
    Database : 10g
    Thanks,
    Sachin
    Edited by: sachin on Jan 14, 2012 4:00 AM

    how to know an application patch can be applied as a hot patch. because read me file of a patch does not describe it all the time.
    r there any methods of finding a patch as a hot patch!!!!!There is no way to determine that and you will have to test the patch in hotpatch mode in a test instance first to see if it works or not. Sometimes, it would be mentioned in the patch README file.
    https://forums.oracle.com/forums/search.jspa?threadID=&q=adpatch+AND+hotpatch&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Business Object's Hot Patches

    Hi,
    We are currently using Business Object XI Release 2, hot patch 2, we would like to upgrade to the latest hot patch.
    Our question is, if we take the latest Hot Patch would it include all the previous Hot Patches? Or, do we have to upgrade one patch at time?
    Thank you in advance.

    Hi,
    First of all, thank you for your reply, back in November 2008.
    We are about to start the upgrading of Business Objects Release 2 with hot patch 2, we have not installed any service pack yet.
    Our questions are: can service pack 2 be installed on top of hot patch 2? Or, do we have to roll back hot patch 2 first, and then install service pack 2?
    Thank you in advance.

Maybe you are looking for