In 10.8, the file info window's "Kind:" read "Application"/etc. for 64-bit items and "Application (32-bit)"/etc. for 32-bit items. The "(32-bit)" part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?

In 10.8, the file info window’s “Kind:” read “Application”/etc. for 64-bit items and “Application (32-bit)”/etc. for 32-bit items.
The “(32-bit)” part seems to have been lost in Mavericks. How do I determine if an item is 32 or 64-bit in Mavericks?

1. Launch System Information into its 'report' mode. (A quick way to do this is by holding down the option key while clicking on the Apple menu item, which causes "About this Mac" to change to that.)
2. From the list on the left, under "Software" click on "Applications." (If you don't see the Applications item, click on "Show more information" from the "File" menu.)
3. Wait a minute or so for the report to finish.
4. The last column in the report is "64-bit (Intel)." (You may need to scroll the window to the right to see it.) Click on that heading to sort the list alphabetically. Anything with a "no" is 32 bit.

Similar Messages

  • Upgraded to Elements 11 from 9.  Form windows 7 to MacOS.  Events and dates seem to have been lost

    After importing catalog, events and dates seem to have been lost.  People tags imported OK.  Thoughts?

    Same issue.  I have multiple ATV2 and ATV3 - none could access home sharing after updating to 11.1.
    I've learned my lesson from previous iTunes updates, so I always have a backup of my library.  So I uninstalled 11.1 and deleted every iTunes folder I could find on my drive (important because I didn't do this the first time, and home sharing did not work).  Then I restored my library from backup (iTunes folder), and installed iTunes 11.0.5.  Home sharing works, with:
    ATV3 with updates
    ATV2 with updates
    ATV3 without updates
    ATV2 without updates (not tested yet)
    Yea, so something is wrong with iTunes 11.1 with home sharing.  Hopefully Apple will address.  If not, hopefully they will support 11.1 for a very long time.

  • How do i get my file back when it seems to have been lost or replaced?

    My Mac froze and then shut down so i started it up again to find my indesign file had been replaced with a much older file with practically no work on. I closed the document and tried opening it again but it now will just open as a much older file. I think my file has been completely lost and it had so much work ok.

    Yes I have checked but cannot find an alternative file. It seems to have saved over my most recent file.
    I have followed
    Mac OS X: Users/[User Name]/ Library/Cache/Adobe InDesign/Version[#.0]/ InDesign Recovery
    And i get a message saying

  • A large portion of edited and saved material seems to have been lost in transit  this is time sensitive material that i need to find

    I have been editing and saving a project to the adobe cloud  when I tried to send it via the link all material was lost  and has so far not been recovered

    You really need to provide more information if you expect any help.

  • File info window freezes

    My new computer has Yosemite 10.10.3 and I'm happy to say Elements 6 works with it.  But when I wanted information about a picture something happened that does not seem right.
    I opened the picture and went to File / File Info.  A window opened that asked for information about the picture.  The problem is that as soon as I clicked anywhere int he File Info window it froze.  Nothing happened.  Everything else seemed to continue working but when I clicked on the picture behind the file Info window, it did not come to the front.  I had to close photoshop to get rid of the file info window.  Is this problem common or perhaps I'm doing something wrong?
    Also, sometimes I need to know the date a picture was taken.  I thought there was a way to find that from file information on the computer but I don't remember how.
    Thanks for your help.
    Bob

    Hello A
    Have you tried creating a new account and see how your apps work in that User acct? (That will tell if your problem is systemwide or limited to your User acct.)
    Open System Preferences > Accounts > "+" make it an admin account.
    If this works, then log back into your problem account and navigate to ~(yourHome)/Library/Preferences and trash these two files:
    com.apple.finder.plist
    com.apple.sidebarlists.plist
    Then log out and back in again. Or restart.
    (You will have to reset a few finder prefs the way you like them.)
    Let us know.
    -mj
    [email protected]

  • Close File Info Window

    I clicked File.File Info and a window opened that I can only maximize.  Can't close that window and get back to project. Does anyone know how to close the File Info window?

    It doesn't have this cancel button?

  • File info window is blank

    Hello
    I'm on a iMac running 10.7.5 and all 3 of my Adobe products (Illustrator CS5.1, Photoshop CS5.1 and Flash CS5.5) have the same issue, the file info window is blank. It dosen't freeze up my machine but I have to force quit the program. I trashed the prefs file for photoshop and still no luck. The extension are whatever came with the install. It's the only menu item this happens with.
    Thanks,
    Ron

    Ron,
    You may try to Move the folder.

  • The file download window keep coming up wheneven i...

    Wheneven i opened the skype, it will come out a file download asking me to open or save the index.html or chatwidget.html and recently skype require me to change password so after that i cant log in anymore because everytime i go inside if i click cancel in the file download window, the skype will go blank, or if opened the file then the log in page picture will appear in google chrome website which i still cant find a way to log in. Its not only Skype that i got this problem, even i opened other apps, the file download window will keep coming up too. 
    Solved!
    Go to Solution.
    Attachments:
    skype.png ‏148 KB

    What is the version of Internet Explorer installed on your computer?
    In Internet Explorer go to Help -> About Internet Explorer.
    Skype login screen is created using the index.html file, which is accessed using Internet Explorer components installed on your computer.
    P.S. Please, don’t say that you are not using Internet Explorer. This is irrelevant. Skype depends on Internet Explorer.

  • My bookmarks have been lost and none of the suggestions in the database have helped

    using firefox 3.6.3 on mac os 10.6.3
    just updated to firefox 3.6.3 and my bookmarks have been lost. i tried restoring through menu > bookmarks > restore, but there's nothing there. i also tried the other suggestions as well, but nothing has helped.

    yes, actually, sorry i didn't notice/mention that. everything seems to have been lost. but i didn't create anything. all i did was update firefox (download and drag into applications folder)

  • Can't write to Desktop ƒ; contradictory permissions info in the Get Info window

    I don't have write permission for my Desktop folder.
    In the folder's Get Info window, under Sharing & Permissions, it reports a contradiction:  it says "You can only read," and at the same time under Privilege it says I have "Read & Write" access. If try I use the popup menu to change "Read & Write" to something else, it goes right back to "Read & Write" upon releasing the menu.  At any rate, "You can only read" is the correct part of the contradictory info.
    My account is an Admin account.  I am typing the correct password to unlock the fields in the Get Info window.  I've tried repairing permissions in Disk Utility, and that didn't help.
    A user named bennarsson reported the exact same problem in this thread:  https://discussions.apple.com/thread/3039851?start=0&tstart=0
    baltwo responded that "If you've selected your Desktop folder, then something is extremely wrong if it says You can only read, while showing you under name with read and write privileges."  No kidding!  Other than that, bennarsson didn't get any solution to the problem. 
    Any ideas?  It's pretty frustrating not being able to modify anything in my Desktop folder!

    Try this. Launch the Terminal app in /Utilities, copy & paste this this command into TextEdit, substitute your actual username for the placeholder, copy and paste it into the window that pops up, and hit the return key. So if your username was mike, it would be sudo chown -R mike:admin ~/Desktop
    sudo chown -R username:admin ~/Desktop
    When the Password: prompt pops up, carefully type in your admin password, since nothing shows up on the screen, and hit the return key. That should do it.

  • When i try to open itunes on my mac a message comes up saying The file "iTunes Library" cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?"

    When i try to open itunes, a message pops up saying "The file “iTunes Library” cannot be read because it was created by a newer version of iTunes. Would you like to download iTunes now?." I have tried downloading the newest version of itunes but it still won't open. What should i do?

    Update your copy of itunes to the current version.

  • "There has been a network or file permission error. The network connection may have been lost

    Hi,
    While trying to save an Excel or (less frequently) Word document, employees at my company have been seeing the error, "There has been a network or
    file permission error. The network connection may have been lost."  This is more common when they are connected through the VPN, but it also occurs locally.
    The employees all have Win 7 Pro laptops and the file server is Win Server 2008 R2.  I have found suggestions that a Windows update is the cause, but the articles on that all limit it to Server 2003.  Others have suggested setting the program to
    save a local copy of remote files; however, while the setting exists in Word, it does not exist in Excel.
    If anybody has any advice, it would be greatly appreciated.
    Thank you

    This is a known issue, might try the workaround is a better chooses .
    http://support.microsoft.com/kb/291156
    KR

  • I downloaded music to my iphone and when I went to go sync it up to itunes, I lost all of the songs purchased from that time until the previous time I backed it up. How do I recover these purchased songs that have been lost?

    I downloaded music to my iphone and when I went to go sync it up to itunes, I lost all of the songs purchased from that time until the previous time I backed it up. How do I recover these purchased songs that have been lost?

    All of your music should be in itunes on your computer.
    Select it to sync and sync.

  • To run iTunes in 64-bit mooose the "Get Info" command in the File menu, and uncheck the "Open in 32-bit mode" checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it a

    To run iTunes in 64-bit mode, select the iTunes application in the Finder, choose the “Get Info” command in the File menu, and uncheck the “Open in 32-bit mode” checkbox in the iTunes Info window. but i doesn't have the tick thing plus i redownloaded it again and same message comes up

    Have you disclosed the "General" brick in the "Info" panel? Click the disclosure triangle to the left of "General":
    What is your iTunes version and MacOS X version?
    -- Léónie

  • How do I set the View Options in the Track Info window?

    Hi -
    Novice question here...(GB'11)
    I am trying to save an Instrument after I made some changes to the Effects.
    When I click "Save Instrument..." I get an alert
    "The file will be hidden.  You have chosen not to show your own settings.  If you save the file now it won't show in the browser unless you change your view options in the Track Info window."
    I didn't know I had chosen not to show my own settings.
    I am looking at the Track Info window (both the Browse tab and the Edit tab) and I cannot see where I can change "view options".
    Am I looking in the wrong place?  I really do want my new saved changes to be on that list.
    TIA you experienced input.
    j2

    The answer is obviouse when you find it the pulldown menu, it is in the middle of the info panel just below the tabs, and may be showing 'Garageband', press this and you can see a number of options including 'Show all'

Maybe you are looking for

  • How to modify the "To Print" Steps in the Print the Report Dialog box

    From the Crystal Reports Viewer Toolbar, when selecting the Print option, a 'Print the Report' Dialog box opens. Is it possible to modify the 'To Print' steps? We tried modifying  (commenting-out the To Print steps) in strings_en.js and export.js, bu

  • Table for Special Stock Types

    Hi All, I am creating a report to display the stock information of a material. In that i need to include all the special stocks also. Can anyone please tell me the table containing the data for special stock type E,K,M,O,P,Q,V,W,Y

  • Attaching pictures to e-mail as jpeg

    I am trying to attach pics as  jpeg files to an outgoing e-mail using Apple Mail and they appear as pictures. I tried to select "Format-Make plain text", but the recipient (who has MS Outlook) says they came embedded as pictures. Any thoughts? Thanks

  • Sending LOB to procedure

    Is there any possibility how to send BLOB parameter to PL/SQL procedure from OCI The following PL/SQL code is working connect test_user1/test_user1; drop table test_tab; create table test_tab (f1 integer, f2 blob); create or replace procedure test_bl

  • Virtual Console on Separate Screen

    As in the title, I would like to know how (if at all possible) to run a virtual console on my second screen, and still have X, Openbox, all my graphical stuff on my main screen.