In address book, display address or other columns

I cannot figure out how to display additional fields/columns in address book. I can adjust size of existing fields but adding new fields is a puzzler.

Thanks so much. I guess I was clicking on the right mouse button, not the left.
Jim

Similar Messages

  • Adding a Column to the Top of Address Book Display

    I guess I have two problems in Address Book.
    1. How do I add a custom field that is not on the list in "Template?" I want to add something called "show date" to all my address cards.
    2. I want to have "show date" display at the top of the Address Book window in the middle column, where name is now shown. I'd like it to be Name, then Show Date, and be able to sort it by either one.
    Any ideas? I won't be disappointed if it can't be done, but I thought I should check here just in case.
    Thanks!
    Tamara
    Mac mini   Mac OS X (10.4.3)  

    whjk,
    Select the bars - click once on the Chart and then click on one of the bars.
    Open the Chart Inspector and click the Series button. Click on the Value Label Checkbox and then click on one of the Position buttons.
    Feel free to download the Numbers User Guide and consult it. There's a link in the Help menu.
    Regards,
    Jerry

  • 5800 Address Book Display

    Hi, just got the Nokia 5800 XpressMusic and was wondering if anybody knows how to change the address book display.  In all my previous Nokia phones I have had the choice of displaying just Names, or Name & Number, but I cannot find any settings that allow me to change this in this phone.  It just displays the names.
    Solved!
    Go to Solution.

    grschinon wrote:
    BTW, it is customary to mark the post that you consider to be the solution as the accepted solution.
    Magicfingers strikes again...
    If this or any post answers your question, please remember to help others by pressing the 'Accept as solution' button.

  • HT2486 Address Book display

    My address book display is not like the one shown. Why?

    Have you tried resetting your sort option in Address Book / Preferences? Change it from whatever you have it (e.g. First Name) to the other choice. Then try to Search a contact. If it works, then go back in and reset it to what you had it before.

  • Palm desktop doesn't show address book or memos or others

    No device
    When I tried to sync my Tungsten E2, recieved an error message (could not establish communications - check your settings).  On a support website, it suggested the first step I try is to download and install the latest software.  I did and installed it.  Palm did its sync with no problem.   HOWEVER, when I ran the Palm desktop, only the Calender, Media, and Note Pad would display their data.  In the log, it showed that all of the apps uploaded their data. 
    After re-installing the software two more times, now it only displays pictures from Media, and nothing else!  What gives? and how can I correct this?

    It's really up to you, but there are some caveats that you should be aware of.
    With regard to synchronization, the Palm Desktop is not now (and never will be) Sync Services aware. Virtually all applications which engage in synchronization—under Mac OS X 10.4 or later—are, or soon will be. This renders the Palm Desktop effectively useless or, at the very least, outmoded, as a synchronization tool.
    The Address Book is integrated to degree with Mail, and will be more so under Mac OS X 10.5, scheduled for release in about 6 months. The Palm Desktop is not.
    I use the Address Book for contacts, iCal or calendars, the Missing Sync for Palm OS to synchronize them and to synchronize memos, AvantGo content, selected iPhoto and iTunes files, along with such mundane applications as airline schedules. And, I use Mail.
    I'm no fan of Microsoft, but if Outlook worked well for you in the PC world, you should consider Entourage, with it's Sync Services aware capabilities, it's ability to synchronize contacts with the Address Book, calendars with iCal and memos through .Mac Sync. It is, of course, an integrated application including Mail capabilities, and is generally used as an alternative to Mail, the Address Book and iCal.

  • I have an airport extreme 2013.  Why does my airport utility sometimes display IP addresses and other times the names of the devices?  I want it to always display the device names.

    I have an airport extreme 2013. Why does my airport utility sometimes display IP addresses and other times the names of the devices? I want it to always display the device names.

    The utility has had less and less useful information .. it might be time to simply find a different utility.
    Fing network scanner. iphone and ipad.
    https://itunes.apple.com/au/app/fing-network-scanner/id430921107?mt=8
    This is very popular.. I do not know of what works well on Mac OS because i have installed 5.6 utility which of course has far more info than the later toy version. Plus using an Asus router which has excellent listing of all the clients.
    Sometimes beating yourself up to make apple routers do what you want is easier solved with lateral thinking.

  • Can I push email from one mobilme acct and contacts and address from other?

    I have 2 mobilme accts - one my asst uses for y ical and address book and one I use for my personal email - can I push email from one mobilme acct and contacts and address from other? - I used to be able to on 2.0 but I cant seem to on 3.0...Any thoughts?
    Or is there a way to restrict access on mobilme acccounts so my asst can only see the ical and address book and not my email if we use one acct.

    Short answer, no, not on the iPhone itself.
    You can't do it on the iPhone itself.  If you have a mac, then you have to hook it up to your computer and in iPhoto create the albums.
    Then in iTunes you can tell it which albums you want put onto the iphone.
    If you have a windows comptuer, I'm not sure which program you use, but you can create albums on there as well, then choose which albums in iTunes you want synced to the phone.

  • I have 2 apple I d 1is my email address the other is not  I can't sign into that one how do I convert it to analog account

    I have 2 apple I d 's one is my email address the other is not I can not sign in to this account I was told I need to convert this to an aol account how do I do this

    If you need to create an AOL email account, start here.
    http://help.aol.com/help/microsites/search.do?cmd=displayKC&docType=kc&externalI d=72358

  • ISCSI Initiator favourites revert to using the IPv6 or the apipa IP address from other NICs instead of the source IP address that I specified

    Windows 2008 R2
    ISCSI Initiator favourites revert to using the IPv6 or the apipa IP address from other NICs instead of the source IP address that I specified. 
    When I manually connect to multiple targets and specify the correct ISCSI source IP address, I check the favourites and everything looks okay. But when the server is rebooted I check the favourites again and the source IP is now referencing the IPv6 and
    sometimes the apipa address. 
    I have unbound IPv6 from the ISCSI NICS but this has made no difference.
    Can anyone explain why this is happening?
    Although the server still reconnects to the storage oaky, I’m concerned that if a path goes down that is might try to use the wrong interface to re-establish a connection.
    Thanks.  

    Hi,
    IPV6 is supported with MS iSCSI. Do you have Multiple Connections per Session (MCS) configured? Is your storage configured to use both IPv4 and IPv6?
    If yes, please see if http://support.microsoft.com/kb/2014131 helps.
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How to get the MAC address of  other hosts in local net

    1. Is there any kerner or user function to get the MAC address of other hosts in local net?
    2. ire_route_lookup() can only lookup MAC in routing table(arp -a),Is there any way to enable it to find out all MAC of hosts in the local net?
    Best Regards
    Hann

    ChristianEC wrote:
    Hi,
    I am looking for a way to get the MAC address of a PXI RT controller. I know that there is a VI to do this, but I am looking for a solution for a dll (C-Code).
    I use the "Call library node" to call this dll and want to make sure that it is only used on a specific PXI.
    Since the VI provides the functionality, I am wondering if it is also available to be called from C-Code?
    Thank you,
    Christian
    If it is available in LabVIEW it is probably available in CVI, which you could then build into a DLL (if there isn't one available already).
    CLA, LabVIEW Versions 2010-2013

  • Displaying other columns/tables apart from a cross tab

    Hi,
    I designed an RTF template. This contains 3 tables. First table contains the invoice information. 2nd table is the cross tab and 3rd table contains the aging details. My requirement is to print the other tables in all pages if the cross tab goes to multiple pages. Presently all the tables are displayed in the 1st page only. If the cross tab output goes to next page then the 1st and 2nd tables are not being displayed in other pages.
    Can anyone suggest me how to display the other columns/tables apart from cross tab columns if the cross tab output goes to multiple pages.

    Can u plz send me the sample xml and the template so tat i can help u frm my side...

  • Why do I receive spam that is addressed to others?

    The Subject line states my question. I want to know why spam that's addressed to other MobileMe members ends up in my Mail in box. And what can I do to stop it? More to the point, what can Apple do to stop it?

    This is a user-to-user discussion/help forum hosted by Apple. You are not talking to Apple here.
    This is also an iPad discussion forum not MobileMe.
    Try Apple MobileMe support at http://www.apple.com/support/mobileme/

  • Can I connect my Mac (Mac OS X) with other machine (Windows OS) on same LAN using telnet in terminal? For example, telnet ip address of other machine

    Can I connect my Mac (Mac OS X) with other machine (Windows OS) on same LAN using telnet in terminal?
    For example, telnet <ip address of other machine>
    I m a networking student and I have learned to connect 2 machines on Red hat Linux OS on same Ethernet LAN which has same subnet mask. As Mac OS X is also a linux based OS I m trying to connect my Mac with my friends windows based machine using telnet <ip address of his machine>. However, I get a message "unable to connect to remote host".
    Can anyone please tell me is this the problem because of different OS or it is something different!
    Please reply...it will of great help..

    The machine you're trying to connect to needs a Telnet server running on it - telnetd listening on port 23 (usually).
    Incidentally, Mac OS X is not a Linux based OS, it is based on BSD Unix.

  • IMesssage has stopped using my cell phone number and is only showing email addresses -- in other words, when I text, it is showing up as coming from an email address, even when i use my phone.   Laptop

    iMesssage has stopped using my cell phone number and is only showing email addresses -- in other words, when I text, it is showing up as coming from an email address, even when i use my phone.   The laptop and phone are still synchronized and messages are showing on both devices.
    I've seen this before and was able to fix in Settings, but that is not working now.
    Please help.  Thanks.

    Did you replace your iPhone with some other kind of phone? If your phone number is no longer connected to an active iPhone, you can't use it to message from your Mac.

  • Iphone 5 not downloading emails from one email address. Other email address work ok. Any suggestions?

    iphone 5 not downloading emails from one email address. Other email address work ok. Any suggestions?

    Hello rtie1,
    Thanks for using Apple Support Communities.
    For troubleshooting Mail on your iPhone please follow the steps in the article linked to below.
    iOS: Troubleshooting Mail
    http://support.apple.com/kb/TS3899
    Take care,
    Alex H.

Maybe you are looking for

  • Tds amount

    hi , Regards TDS,Can u explain with one example?(step by step how can i do ?) error: TDS amount is not captured at miro  entry help me regards kavi

  • USB not recognized during restore

    Trouble with upgrading software, the process hangs in the restore, keep getting error 1604, wondering if the USB is getting reset in the restore process?  I have turned off the virus protections,etc. so that should not be the problem.

  • Query - weight delivered each day

    Hi all. I'm currently working at a query to calculate the weight delivered each day. My thougt is to first calculate from DLN1 table and then subtract from RDN1 table. Deliveries minus returns. I can easily create these queries as stand alone queries

  • Benchmarking Key Figures in a query which is posted in a web template.

    Hi All, has someone experiences with benchmarking in a query? What possibilitys do we have? We want to show the following: The query has in the rows the characteristic "sector" and in the collumns several figures. We navigate in this report via "filt

  • Semi conductor industry

    Dear Friends, please indicate semi conductor industry configuration details and also in general how we can correlate with SAP SD  Regards, Veeresh