In Address Book, Lion, what are the checkmarks for when you Edit a Contact?
In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?
I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.
Similar Messages
-
What are the table filled when you select ABAP?
What are the table filled when you select ABAP?
Hi mate,
You need to make your question clearer. Tell us what your requirements are and we can help you more.
Some hints:
You can read data from InfoProviders (e.g. InfoCubes, DSOs etc) using function module RSDRI_INFOPROV_READ.
Hope this helps. -
What are the "Conference Calls" when you reach level 4?
What are the "Conference Calls" once you reach level 4 on the Apple Support Communities? You can find the "Conference Calls" perk here:
https://discussions.apple.com/static/apple/tutorial/reputation.html
Any help would be greatly appreciated.Hi Austin,
https://discussions.apple.com/static/apple/tutorial/reputation.html
Level 1 0-149
Level 2 150-499 Report Post
Level 3 500-999 Custom Avatar
Level 4 1,000-3,999 Conference Calls
Level 5 4,000-7,999 User Tips
Level 6 8,000-19,999 Lounge Access, MVP Meetups
Level 7 20,000-34,999
Level 8 35,000-49,999
Level 9 50,000-79,999
Level 10 80,000+
Level 1: nothing.
Level 2: ability to report posts for non-compliance with the Terms of Use (or perhaps someone showing personal details).
Level 3: custom avatar
Level 4: Conference calls. I am not holding my breath. I have not been invited yet.
And if a conference call means a phone call, Australia is +10 hours UTC (as in 10 hours ahead of Greenwich Mean Time, London, UK). I don't expect to be invited.
If you enjoy reading questions and answers in these forums, keep doing it. As you read and learn, you will find: "Hey, I can answer that!" and the reward comes from the thanks, not the points.
Regards,
Ian -
What are the rules for when a Calling VI has be resaved after a subVI is changed?
We are planning on making changes to a driver set. However, if one of our applications has VIs that have to be resaved because of these changes, then we will have to go through an extensive validation process for each application. Therefore, it would be very helpful for us if we knew what changes can be made without the caller VIs needing to be resaved. If a caller VI does need to be resaved, what about it's caller VIs?
For example, I know that adding or deleting a control would require the caller VIs to be resaved. What other rules are there? Sometimes it seems like I did nothing that would change the connector pane, yet the caller VIs have to be resaved (i.e., they get the asterisk). Does anyone have a full list of when VIs need to be resaved when their subVIs are changed?
Thanks,
TomFirst of all, I should emphasize that I'm talking about not making any changes to the VI itself, only changes to the subVI that it's calling. In doing experiments with one VI and one subVI, I get the same explanation each time in the Current Changes field: "VI recompiled." and "SubVI call(s) modified.". Both are pretty generic.
Since no one has so far responded with a list, here is the start of a list:
1. Adding or deleting controls and/or indicators.
2. Changing the label and/or description of a control or indicator.
3. Adding a for loop to the block diagram.
Those are the obvious ones. There are others I could add to the list, but these don't seem to be very consistent. For example:
4. Connecting or disconnecting wires to controls or indicators.
5. Wiring a control to a case statement (a specific example of #4).
In regards to #5, yesterday, in my experimental VI (I've enclosed them), I wired the numeric control to a case statement, then saved the subVI. The calling VI then needed to be resaved. I disconnected the numeric control and wired up the string control to the case statement. Once I saved the subVI, the asterisk appeared on the calling VI. This was very consistent. Now, this morning, I do the same thing, but the calling VI doesn't need to be resaved.
So my question is, when does the calling VI decide it needs to be resaved? Since I haven't made any changes to the connector pane, or to the controls and indicators, why does the calling VI need to be resaved? Why should the calling VI care if a for loop is added to the subVI?
Since the driver I'm working on is called by 15 different drivers, which is called by 20 different application, all of which have been validated, I really don't want to have to revalidate all of these drivers and applications, simply because I went in and fixed a bug in a low-level driver. So any information that helps me to understand what triggers a calling VI to recompile due to a change in a subVI would be greatly appreciated.
Thanks!
Tom
Attachments:
Example.vi 13 KB
Example_sub.vi 20 KB -
What are the points for?
I am just wondering what are the points for that you get in this Support community thing for?
First, not money or Apple products.
What you get is a "reputation for being helpful" because points are awarded by the OP (original poster) of the thread. OPs can be fickle ... awarding point to the least helpful answer. But time will win out if you truly help.
DO not, please , open more accounts in the ASC and award points to yourself. Moderators will kick you out (all of your accounts) for that.
Reaching level 2 lets you "report" people. I usually only report people who want help explcitly from moderators as you cannot report yourself. I also report people who truly are violating policies badly such as the obnoxious "anonymous usless poster" who posts the same thread in all of the sub-forums.
Basically though, reputation. -
WHAT ARE THE SETTINGS FOR AN ICLOUD EMAIL ACCOUNT
I am trying to create an iCloud email account on my iPad with IOS 6.0.1
what are the settings for Host name in incoming and outgoing mail servers?the information on that link doesnt work. my icloud address is [email protected] not [email protected].. although i tried both on my galaxy note 2. either way the server information is not verifying.
-
What are the URLs for webmail and the wiki?
I see that Lion Server supports webmail and a built-in wiki server, both available through a web browser.
What are the URLs for these; how do I get to them? I can't find that important detail anywhere in the documentation.From /etc/httpd.conf
Alias -->name --> location
Alias /webmail /usr/share/web/webmail.html
Alias /changepassword /usr/share/web/changepassword.html
Alias /profilemanager /usr/share/web/profilemanager.html
Alias /webcal /usr/share/web/webcal.html -
My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac
My ICloud isn't talking to both my MacBookPro and IPhone. What are the settings for the Mac and any suggestions?
In the AirPort Utility, I selected the Advanced tab, and then selected Port Mapping.
Q: What service do I choose from the drop-down menu? Also, where do I enter the two ports you mentioned? Public UDP Port(s)? Public TCP Port(s)? Private IP Address: Private UDPPort Private TCP Port?
still confused, I guess. Thanks! -
My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.
Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius -
What are the steps for loading master data
Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
EvionHi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S -
What are the settings for Primere Elements 9 if I've filmed with a Canon Powershot sx50 HS?
I just got this camera and I want the best quality possible. Unfortunately, it's hard for me to fully know if the settings I try create that. I get a fuzz or noise on objects like if I'm wearing a black jacket it's like static. When I put the video on my phone which is an Android Galaxy s4 it converts it into mp4 format and I get much more clear results than on my computer which perplexes me. I did a lot of trial and error with my previous camera (JVC Full HD Everio) which I got the same results. My newer Canon should be leagues ahead of the JVC, but I really can't tell as of yet. If anyone could help that would be awsome. I have examples of my trials and errors from my Youtube videos which you can see I felt I was slowly making progress with the JVC Oppositeofhood - YouTube
Opposite
Then I saw your latest post
Wait, I think I just found it. I pressed record on different settings to take pictures with like portrait to see if it would make a difference and when I uploaded them to my computer I found where it shows the BIt rate and it varied. They run at 23 frames per second 1920 x 1080 MOV video files and all the Bit rates are like 36,356 35,414 ,36,521
If your camera is recording with a variable bitrate, the Bitrate variations from file to file should not be contributing to the issue. But it does raise the issue related to whether or
not we are setting the appropriate bitrate level in the export settings. What are the units for 36,356, 35,414, and 36,517 -
kbps (also can be written Kbps) and is kilobits per second
or
Mbps which is megabits per second.
Let us try this for one of your 1920 x 1080p24 videos.
Go through the following workflow
Manually set project preset...
NTSC
DSLR
1080p
DSLR 1080p24
When you go to export your edited Timeline content, then use
Share
Computer
QuickTime
with Presets = NTSC DV 16:9 - that is going to be customized to 1080p24 (H.264.mov) under the Advanced Button/Video Tab of that preset
The essential settings under the Advanced Button/Video Tab
Video Codec = H.264
Frame Width = 1920
Frame Height = 1080
Frame Rate = 23.976
Field Type = Progressive
Aspect = Square Pixels (1.0)
Now here is where we are going to experiment....
Bitrate
Check Mark next to Limit Data Rate to and type in 36000 before kbps
note the file size of the export as well as the quality of the playback.
Repeat the whole process but in export
Remove the check mark next to Limit Data Rate. The Bitrate field will be disabled.
note the file size of the export as well as the quality of the playback.
We will be watching for your results.
Thanks.
ATR -
What are the settings for datasource and infopackage for flat file loading
hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumarLoading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets. -
What are the settings for rework order quality inspection
HI,
Iam doing production order confirmation at the GR time some oprations are rejected.that operations i want too rework order CO07 process without GR ,i want to Quality inspection in REWork order.
What are the settings for rework order Quality inspection?Refer beautiful document
http://wiki.sdn.sap.com/wiki/display/HOME/ReworkInProduction -
What are the settings for automatic service PO?
What are the settings for automatic service PO?
Hello,
I would like to know if it is possible to automatically create the PR for services. It would be similar to MD04 but instead of being for stockable materials, it would be done for non-stockable materials (services in this case).
PR would be generated monthly, because this services have to be paid every month, for example electricity, water, rent, phone bills.
I hope you can help me, thank you! -
What are the settings for Transport?
What are the settings for Transport?
u will get three panel in transport connection in BW side
here u need to collect object and drop them to 2nd panel
then u need to select whether u want o select all objects or only necessary objects
select as per ur requirement hten u need to write thse object in a NEw request
now executte nad go to Se10 and relaease sub task and main task
now ask basis team to impot it in QAS test it and again trnasport these to Production environemnt.
assign points if helps
Maybe you are looking for
-
Brand New MacBook Pro and Display Adaptor Issue
Hello fellow Mac users, I've been a long-time Mac user and owner. I just got a new MacBook Pro after using a 2006 model for 2 years and am having a display adapter issue that I need help and advice with: The new MacBook Pro has the mini DVI display c
-
Can firefox be downloaded WITHOUT Bing
I have a windows 8-1 computor and I used to have firefox and liked it very much,however now when I try to down load firefox,all of a sudden I have BING-I DO NOT WANT BING-if it has to be ,then I will not use firefox.
-
Configuring an Outgoing Batch in an agreement - Instance ID not coming back
create a batch in an agreement, click on start, then do several refresh, I do not have an instance ID sent back as mentioned in the documentation. I tried this on 2 different BTS 2010 and 2013, they are both 64 bit, one is win 2008 the 2nd is on a
-
_xmouse on resized movieclip
I am creating a video player and have a scrub bar which you can click on the timeline to get a point in the video. The player is dynamic in size and can be opened at any size you require, set by the movie dimensions in the HTML. I have the controls f
-
Help us name our Stickers!
Hey Everyone, We are going to be introducing some new stickers soon, to add color and personality to you messages. We will select one random winner from all the entries received by Friday at 5pm, PST. You could win $10,000 gold just for entering! Che