# in Analyzer and it exists in DSO

Hi.
I have a problem with Analyzer.
I have done a new characteristic in my DSO. It is Document Number. zdocnumber (char 10) without texts.
I watch in my DSO and this object is filled.
But when I show in Analyzer, in my query this object, it only shows #.
Somebody can help me?
Thanks

Hi again.
Yes, I have done you told me.
System, in RSRV shows this error:
Too many specifications missing for InfoObject 0DOC_NUM
SID values missing for 21.347 specifications of characteristic 0DOC_NUM
Could you help me?
Thanks

Similar Messages

Request REQU no longer exists in DSO, system is inconsistent

Dear All,
I was getting an error while activating ODS 'Request is already (partially) activated; no further QM action possible'.
I searched the threads and found one solution: To delete the request in RSICCONT (delete activated requests OR
Make the selective deletion of the contents of that request).
I implemented the same but now activation fails with an error"Request REQU_4GQUIQJL4OPNEI5NH6HZMJ5HF no longer exists in DSO ZRMS_O01; system is inconsistent".
Please help.
Regards,
Amit Srivastava

Dear Des,
I have pasted the entries for the concerned request as in table RSODSACTREQ. I have only pasted fields which had any values in them.
Infocube       Request                                                    data packet operation                                                timestamp
ZRMS_O01     REQU_4GQUIQJL4OPNEI5NH6HZMJ5HF          U               0
ZRMS_O01     REQU_4GQUIQJL4OPNEI5NH6HZMJ5HF           1                  U               20,100,205,121,450
ZRMS_O01     REQU_4GQUIQJL4OPNEI5NH6HZMJ5HF           2     U               20,100,205,121,455
Please advise.
Regards,
Amit Srivastava

Analyze and optimization

Hello everyone,
I'm on this subject for now 3 weeks and i need help.
I'm trainee in a company where i have to analyze and optimize their GPO as simple as that, I so learn in detail how does this tool work ect and other useful things about Active Directory.
I learned their 60 gpos (Some rules up to 600 settings...) and their thousands parameters which is essential for me and during my searches i found many many many softwares to detect parameters conflicts or duplicated settings, but after all my tries i'm
not satisfied today by what i found.
I used a trial version of GPOAdmin, the GPO Reporting pack from SDM, probably all the Microsoft tools, ActiveAdministrator ect ... I mean all these tools are very powerful and allow many features but i just need something that will find and tell me where
are all my conflicts on my domain and by this I will correct these settings to have a full capable domain optimized and users won't complain anymore because they'll have a faster logon ect...
Maybe I don't use the products as i should or maybe it doesn't even exist but it seems very long to analyze all by my self and write every parameter on each object that will be applied and check if there won't be conflict or another GPO for this setting.
Maybe Powershell can help me on this but I don't know how to use it to.
So here I am and if you have any idea to help me on the best practice or someone had to do the same job as I have tell me I'll be very happy to receive your information.
Thanks and sorry for my English.

> I mean that if there are 10 gpo for the domain and 10 others on children
> UO, some parameters will be overwritten (Conflict) or the same
> parameters will be set 5 times (Duplication).
Yes, that's true. But setting a simple registry key takes a time windows
cannot even log to the gpsvc.log file. This is from a VM running on a
desktop system concurrently with 4 other VMs:
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 1 =>
Microsoft.CredentialManager [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 2 => Microsoft.GetPrograms
[OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 3 => Microsoft.HomeGroup [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 4 =>
Microsoft.iSCSIInitiator [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 5 =>
Microsoft.ParentalControls [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 6 =>
Microsoft.PeopleNearMe [OK]
GPSVC(478.d68) 11:48:19:813 SetRegistryValue: 7 =>
Microsoft.UserAccounts [OK]
GPSVC(478.d68) 11:48:19:829 SetRegistryValue: 8 =>
Microsoft.WindowsAnytimeUpgrade [OK]
And even here it takes only about 1 ms average - on a real system, this
is about 50 times faster.
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Content analyzer and browser

Hi,
What is Content analyzer and browser and what does the Tcode : RSBICA does...
Regards,

Martin
I used the same document from help.sap.com to configure the setting. I am not sure what needs to be done. I ran the transactions RSBICA, but no data is shown. I have loaded the DSOs and no data could be extracted.
Thanks
Latha

Not in and Not Exists

Hi everyone,
I need some explanation on why the index is not being used in one of my queries.
Here are the queries:
SELECT COUNT (1)
FROM (SELECT hdr.ALLOC_HDR_SEQ_NBR hdrnbr
FROM sm_vda_allocation_header hdr
INNER JOIN
sm_vda_type vdatype
ON hdr.vda_typ_cd = vdatype.vda_typ_cd
WHERE
vdatype.SAP_POST_TYP_CD = 'JE'
AND vdatype.vda_alloc_flg = 'Y'
AND hdr.vda_liab_flg IS NULL
AND hdr.sap_extrct_dt IS NULL
AND hdr.ALLOC_HDR_SEQ_NBR NOT IN
(SELECT alloc_hdr_seq_nbr
FROM sm_vda_allocation_detail));
return 0 rows.
explain plan::
Plan
SELECT STATEMENT CHOOSECost: 671 Bytes: 26 Cardinality: 1
     8 SORT AGGREGATE Bytes: 26 Cardinality: 1
          7 HASH JOIN Cost: 671 Bytes: 293,254 Cardinality: 11,279
               1 TABLE ACCESS FULL SM_APPL.SM_VDA_TYPE Cost: 5 Bytes: 56 Cardinality: 7
               6 MERGE JOIN ANTI Cost: 665 Bytes: 281,106 Cardinality: 15,617
                    3 TABLE ACCESS BY INDEX ROWID SM_APPL.SM_VDA_ALLOCATION_HEADER Cost: 496 Bytes: 241,860 Cardinality: 20,155
                         2 INDEX FULL SCAN UNIQUE SM_APPL.SM_VDA_ALLOCATION_HEADER_PK Cost: 438 Cardinality: 20,450
                    5 SORT UNIQUE Cost: 169 Bytes: 417,480 Cardinality: 69,580
                         4 INDEX FAST FULL SCAN NON-UNIQUE SM_APPL.SM_VDA_ALLOCATION_DETAIL_FK_I Cost: 86 Bytes: 417,480 Cardinality: 69,580
2nd query::
SELECT COUNT (1)
FROM (SELECT hdr.ALLOC_HDR_SEQ_NBR hdrnbr
FROM sm_vda_allocation_header hdr
INNER JOIN
sm_vda_type vdatype
ON hdr.vda_typ_cd = vdatype.vda_typ_cd
WHERE
vdatype.SAP_POST_TYP_CD = 'JE'
AND vdatype.vda_alloc_flg = 'Y'
AND hdr.vda_liab_flg IS NULL
AND hdr.sap_extrct_dt IS NULL
AND NOT exists
(SELECT 1
FROM sm_vda_allocation_detail b where
hdr.ALLOC_HDR_SEQ_NBR = b.ALLOC_HDR_SEQ_NBR));
explain plan:::
Plan
SELECT STATEMENT CHOOSECost: 831 Bytes: 20 Cardinality: 1
     6 SORT AGGREGATE Bytes: 20 Cardinality: 1
          5 FILTER
               3 HASH JOIN Cost: 828 Bytes: 14,560 Cardinality: 728
                    1 TABLE ACCESS FULL SM_APPL.SM_VDA_TYPE Cost: 5 Bytes: 56 Cardinality: 7
                    2 TABLE ACCESS FULL SM_APPL.SM_VDA_ALLOCATION_HEADER Cost: 822 Bytes: 12,096 Cardinality: 1,008
               4 INDEX RANGE SCAN NON-UNIQUE SM_APPL.SM_VDA_ALLOCATION_DETAIL_FK_I Cost: 3 Bytes: 90 Cardinality: 15
In the 2nd query with NOT EXISTS, I see FULL table scan for SM_APPL.SM_VDA_ALLOCATION_HEADER
In the first query, the index is used in the same place:
2 INDEX FULL SCAN UNIQUE SM_APPL.SM_VDA_ALLOCATION_HEADER_PK Cost: 438 Cardinality: 20,450
ALLOC_HDR_SEQ_NBR is a primary key column.
Actually NOT IN and NOT EXISTS both used index for the second inner table (SM_APPL.SM_VDA_ALLOCATION_DETAIL).
But NOT exists is not using the index for the first table but not in is using.
how come.

872605 wrote:
Hi everyone,
I need some explanation on why the index is not being used in one of my queries.
Here are the queries:
SELECT COUNT (1)
FROM (SELECT hdr.ALLOC_HDR_SEQ_NBR hdrnbr
FROM sm_vda_allocation_header hdr
INNER JOIN
sm_vda_type vdatype
ON hdr.vda_typ_cd = vdatype.vda_typ_cd
WHERE
vdatype.SAP_POST_TYP_CD = 'JE'
AND vdatype.vda_alloc_flg = 'Y'
AND hdr.vda_liab_flg IS NULL
AND hdr.sap_extrct_dt IS NULL
AND hdr.ALLOC_HDR_SEQ_NBR NOT IN
(SELECT alloc_hdr_seq_nbr
FROM sm_vda_allocation_detail));
return 0 rows.
explain plan::
Plan
SELECT STATEMENT CHOOSECost: 671 Bytes: 26 Cardinality: 1
     8 SORT AGGREGATE Bytes: 26 Cardinality: 1
          7 HASH JOIN Cost: 671 Bytes: 293,254 Cardinality: 11,279
               1 TABLE ACCESS FULL SM_APPL.SM_VDA_TYPE Cost: 5 Bytes: 56 Cardinality: 7
               6 MERGE JOIN ANTI Cost: 665 Bytes: 281,106 Cardinality: 15,617
                    3 TABLE ACCESS BY INDEX ROWID SM_APPL.SM_VDA_ALLOCATION_HEADER Cost: 496 Bytes: 241,860 Cardinality: 20,155
                         2 INDEX FULL SCAN UNIQUE SM_APPL.SM_VDA_ALLOCATION_HEADER_PK Cost: 438 Cardinality: 20,450
                    5 SORT UNIQUE Cost: 169 Bytes: 417,480 Cardinality: 69,580
                         4 INDEX FAST FULL SCAN NON-UNIQUE SM_APPL.SM_VDA_ALLOCATION_DETAIL_FK_I Cost: 86 Bytes: 417,480 Cardinality: 69,580
2nd query::
SELECT COUNT (1)
FROM (SELECT hdr.ALLOC_HDR_SEQ_NBR hdrnbr
FROM sm_vda_allocation_header hdr
INNER JOIN
sm_vda_type vdatype
ON hdr.vda_typ_cd = vdatype.vda_typ_cd
WHERE
vdatype.SAP_POST_TYP_CD = 'JE'
AND vdatype.vda_alloc_flg = 'Y'
AND hdr.vda_liab_flg IS NULL
AND hdr.sap_extrct_dt IS NULL
AND NOT exists
(SELECT 1
FROM sm_vda_allocation_detail b where
hdr.ALLOC_HDR_SEQ_NBR = b.ALLOC_HDR_SEQ_NBR));
explain plan:::
Plan
SELECT STATEMENT CHOOSECost: 831 Bytes: 20 Cardinality: 1
     6 SORT AGGREGATE Bytes: 20 Cardinality: 1
          5 FILTER
               3 HASH JOIN Cost: 828 Bytes: 14,560 Cardinality: 728
                    1 TABLE ACCESS FULL SM_APPL.SM_VDA_TYPE Cost: 5 Bytes: 56 Cardinality: 7
                    2 TABLE ACCESS FULL SM_APPL.SM_VDA_ALLOCATION_HEADER Cost: 822 Bytes: 12,096 Cardinality: 1,008
               4 INDEX RANGE SCAN NON-UNIQUE SM_APPL.SM_VDA_ALLOCATION_DETAIL_FK_I Cost: 3 Bytes: 90 Cardinality: 15
In the 2nd query with NOT EXISTS, I see FULL table scan for SM_APPL.SM_VDA_ALLOCATION_HEADER
In the first query, the index is used in the same place:
2 INDEX FULL SCAN UNIQUE SM_APPL.SM_VDA_ALLOCATION_HEADER_PK Cost: 438 Cardinality: 20,450
ALLOC_HDR_SEQ_NBR is a primary key column.
Actually NOT IN and NOT EXISTS both used index for the second inner table (SM_APPL.SM_VDA_ALLOCATION_DETAIL).
But NOT exists is not using the index for the first table but not in is using.
how come.WHY MY INDEX IS NOT BEING USED
http://communities.bmc.com/communities/docs/DOC-10031
http://searchoracle.techtarget.com/tip/Why-isn-t-my-index-getting-used
http://www.orafaq.com/tuningguide/not%20using%20index.html

Difference between Bex Analyzer and Bex WAD

Hi Every one,
I am pretty new to SAP, and working on SAP BW Front end.
I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
I have gone through SAP SDN help etc but i am not understanding it at all.
So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
and also if possible send me link which has got PDF screen shots of what WAD is?
Points is for sure.
Regards,
Ram

Raj,
Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
I am still not able to understand how it is helpful for people like me,
See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
and also if i want i can create it in the workbook and create chart in that work book.
Then what is the point of Web Application Designer (WAD).
See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
If any one has a screen shots of there pls send me.
And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
I have given the points to every one but still what i need i did not get yet.
Regards,
Ram

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?

Assuming you do not have access to the "original" video/project and the YouTube video is the only copy, there is a method. Try "YouTube Downloader" which is a free software that allows you to download clips from YouTube as .mp4 files. You can then edit with Premiere, and re-encode again for upload to YouTube. Just keep in mind that you are re-compressing the video so there will be some quality loss. The better the quality of the original, the better the copy will hold up.
Thanks
Jeff Pulera
Safe Harbor Computeres

How to import and make the content of the original PDF document editable and preserves the pdf appearance and retains existing fields and formatting in LiveCycle

Can someone tell me how I can see my content (artwork and text) after I import it into LiveCycle Designer ES4? I like to import and make the content of the original PDF document editable; preserves the pdf appearance and retains existing fields and formatting, then allow me to do the modifications and save it back into the original PDF document with changes. I have tried everything but still cannot see my content(artwork and Text) of my original PDF after importing it into LiveCycle. All I see are is a blank page with the formatting and layout of where my artwork and text should be. I like to see everything if possible so after I make my change I will know how it will look when I save it back into the PDF and open it in Acrobat Reader.

Can someone tell me how I can see my content (artwork and text) after I import it into LiveCycle Designer ES4? I like to import and make the content of the original PDF document editable; preserves the pdf appearance and retains existing fields and formatting, then allow me to do the modifications and save it back into the original PDF document with changes. I have tried everything but still cannot see my content(artwork and Text) of my original PDF after importing it into LiveCycle. All I see are is a blank page with the formatting and layout of where my artwork and text should be. I like to see everything if possible so after I make my change I will know how it will look when I save it back into the PDF and open it in Acrobat Reader.

How to add new row and update existing rows at a time form the upload file

hi
How to add new row and update existing rows at a time form the upload file
example:ztable(existing table)
bcent                      smh            nsmh         valid date
0001112465      7.4                       26.06.2007
0001112466      7.5                       26.06.2007
000111801                      7.6                       26.06.2007
1982                      7.8                       26.06.2007
Flat file structure
bcent                       nsmh         valid date
0001112465     7.8     26.06.2007 ( update into above table in nsmh)
0001112466     7.9     26.06.2007 ( update into above table in nsmh)
000111801                     7.6      26.06.2007 ( update into above table in nsmh
1985                      11              26.06.2007   new row it should insert in table
thanks,
Sivagopal R

Hi,
First upload the file into an internal table. If you are using a file that is on application server. Use open dataset and close dataset.
Then :
Loop at it.
*insert or modify as per your requirement.
Endloop.
Regards,
Srilatha.

Exist and not Exist

Hello,
I am doing following validation, when user does not have admin privileges, it should display error page - "User does not have admin privileges".
SELECT 1 FROM apex_workspace_apex_users WHERE
user_name =:P6_USERNAME
AND is_admin = 'Yes'
if
I am confused over the use of "Exist" and "Not Exist" in the condition. Can you please help me out with this.

I am confused over the use of "Exist" and "Not Exist" in the condition. Can you please help me out with this.The validation is successful if the query meets the condition:
- "Exists": succeeds if the query returns one or more rows
- "Not Exists": succeeds if the query returns no rows
So for:
SELECT 1 FROM apex_workspace_apex_users WHERE
user_name =:P6_USERNAME
AND is_admin = 'Yes'you need an "Exists" validation as you require the validation to succeed if there is a row that satisfies the condition that a user with that username and admin privileges exists, and return an error message if it doesn't.
(Please update your forum profile with a better handle than "user9065603")

I downloaded a movie last night from iTunes and it downloaded to my laptop and my phone but for some reason it now won't play on my laptop. The album artwork on my laptop has gone and it exists perfectly on my phone. What do I do?

Help!
I downloaded a movie last night from iTunes and it downloaded to my laptop and my phone but for some reason it now won't play on my laptop. The album artwork on my laptop has gone and it exists perfectly on my phone. What do I do?
I paid for it so I'd really like to avoid paying again just to see this movie. Is it because it's on my iPhone? Whenever I try to click on the movie to make it play it just does nothing like it's not there. The file for the movie exists within my iTunes library files but I can't seem to click and drag it into iTunes or open it with iTunes. Need help.

http://www.everythingicafe.com/quick-tips-how-to-delete-songs-from-your-iphone-i pad-or-ipod-touch/2012/02/14/

How to capture a .gif file from a spectrum analyzer and save the file in PC

I want to capture a .gif file from a spectrum analyzer and save the file in PC, but I've got a problem when read data from the instrument. I'm not sure how to format the string got from the instrument , When I use "%s" or "%t" as the read string format the data got from the instrument is truncated.
my code are as follows, could anyone tell me where i am wrong?
char resultsArray[5000];
viPrintf(hSpectrumInstr, ":MMEMTORCR 'CICTURE.GIF'\n");
viQueryf(hSpectrumInstr, ":MMEMATA? 'CICTURE.GIF'\n", "%t", resultsArray);
printf("%s", resultsArray);
getchar();
Solved!
Go to Solution.
Attachments:
readResult.docx ‏50 KB

char resultsArray[5000];
viPrintf(hSpectrumInstr, ":MMEMTORCR 'CICTURE.GIF'\n");
viQueryf(hSpectrumInstr, ":MMEMATA? 'CICTURE.GIF'\n", "%b", resultsArray);

Decode for EXISTS and NOT EXISTS conditions

Hello all,
I need to use either EXISTS or NOT EXISTS before the subquery based on the situation. I have written a test query but its erroring out. Please check it.
select 1 from dual
where DECODE('A','A',EXISTS ,NOT EXISTS)
(select ename from EMP
where ename = 'SCOTT')
Thank You
KK

DECODE will not replace part of the query. Functions don't work that way.
(It won't work if you put EXISTS and NOT EXISTS in quotes, either.)
What you want is something like
WHERE (<condition> AND EXISTS...) OR (<not-condition> AND NOT EXISTS...)You can also do:
SELECT 1
FROM dual
CROSS JOIN (SELECT COUNT(1) AS exists_fg FROM emp WHERE ename = 'SCOTT') ex
WHERE (<condition> AND exists_flag > 0) OR (<not-condition> AND exists_flag = 0)This way, you don't have to include the entire WHERE EXISTS condition twice.
-- Don

In Adobe ExportPDF, can you take an existing PDF and delete existing pages? For example, I have a 5-page report and need to delete pages 2-4. Is this possible? Thanks!

In Adobe ExportPDF, can you take an existing PDF and delete existing pages? For example, I have a 5-page report and need to delete pages 2-4. Is this possible? Thanks!

Hi,
You can do this with Adobe Acrobat.
If you are using Export PDF it is a long procedure.
You need to convert your PDF in word or powerpoint.
Then you can edit the document & again can create PDF.
Regards,
Florence

AppleScript - Writing to non-existent directories, and non-existent files..

All,
AppleScript - Writing to non-existent directories, and non-existent files...
Creating directories several levels deep on the fly.
How do we write to a file that does not exist, buried deep down in a hierarchy of directories that don't exist either...
In trying to do this I explored two options. One used AppleScript, assisted by UNIX, which was simplicity itself, the other one used only AppleScript and was considerably more complex, and slower.
http://www.mac-specialist.com/r/asckdirs.html
Hope these are useful,
Best Regards,
Bill Hernandez
Plano, Texas

Simplified code examples - lacking extensive error checking -
UNIX example 001:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
set UNIXfilePath to (quoted form of (POSIX path of file_Path))
try
do shell script "mkdir -p " & UNIXfilePath -- Attempt to create a folde, and respective intermediary folder(s).
end try
try
do shell script "touch " & UNIXfilePath & "/" & file_Name -- Attempt to create a blank file.
end try
UNIX example 002:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
try
do shell script "mkdir -p " & (quoted form of (POSIX path of file_Path)) -- Attempt to create a folde, and respective intermediary folder(s).
end try
-- Create a file, and enter some text.
set FREF to open for access file (file_Path & ":" & file_Name) with write permission
write "Beispieltext" to FREF
close access FREF
AppleScript example:
set file_Name to "Sales Figures.txt" -- File to create.
set file_Path to "2006 Sales:Forecast:Fruits:Flordia:Oranges:Large" -- Folder to create.
-- Obtain list of text items of 'file_Path'.
set {oAStID, AppleScript's text item delimiters} to {AppleScript's text item delimiters, ":"}
set filePathList to text items of file_Path
set AppleScript's text item delimiters to oAStID
tell application "Finder"
set folder_Path to name of startup disk -- Obtain name of boot disk.
repeat with i in filePathList -- Cycle through list.
try
make new folder at folder_Path with properties {name:i} -- create folder.
set folder_Path to folder_Path & ":" & i -- Create new path for next new folder.
end try
end repeat
end tell
-- Create a file, and enter some text.
set FREF to open for access file (folder_Path & ":" & file_Name) with write permission
write "Beispieltext" to FREF
close access FREF
Mac OS X (10.4.4)

# in Analyzer and it exists in DSO

Similar Messages

Maybe you are looking for