In Answers am seeing "Folder is Empty" for Logical Fact and Dimension Table

Hi All,
Am working on OBIEE Answers, on of sudden when i clicked on Logical Fact table it showed me as "folder is empty". I restarted all the services and then tried still showing same for Logical Fact and Dimension tables but am able to see all my reports in Shared Folders. I restarted the machine too but no change. Please help me out to resolve this issue.
Thanks in Advance.
Regards,
Rajkumar.

First of all, follow the forum etiquette :
http://forums.oracle.com/forums/ann.jspa?annID=939
React or mark as anwser the post that the user gave.
And for your question, you must check the log for a possible corrupt catalog :
OracleBIData_Home\web\log\sawlog0.log

Similar Messages

  • Join multiple facts and dimensions for reporting issue

    Hi,
    I have a report requirements and need to use multiple fact tables and unconformed dimensions as described below
    Fact table: F1,F2,F3
    Dimensions tables: D1.....D9
    F1:(joined to) D1,D2,D3,D4
    F2::(joined to)D1,D2,D5,D6
    F3::(joined to)D1,D2,D7,D8
    D7::(joined to)D9,D8 (dimension D7 joined to two other dimensions D9 and D8
    I'm trying to use columns from almost all the fact and dimension tables but getting "Unable to navigate requested expression. Please fix the metadata consistency warnings."
    Repository is consistent and no errors and warnings.
    How can I configure the repository to develop reports using all fact tables and dimensions?
    Appreciate for your help.
    Thanks
    Jay.

    You can find the same issue in
    Logic of queries in OBIEE
    or
    Connection between 2 fact tables
    Follow the link
    http://there-n-back-again.blogspot.com/2009/04/oracle-analytics-how-to-report-over-non.html
    Put 'All' or 'Total' at levels for dim_xxx for those facts you need in your report from facta and factb
    Regards
    Nicolae

  • When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears.  Then I click on it and for photos is a triangle with an exclamation point.  It doesn't happen to all but quite a lot. how to I get them back

    When I open Iphoto, I see all my photos for a second and then they disappear and only a white dotted box appears.  Then I click on it and for photos is a triangle with an exclamation point.  It doesn't happen to all but quite a lot. how to I get them back

    Have you recently deleted photos using the finder or run clean up software?  Is so restore your backup
    If not the backup your iPhoto Library and launch iPhoto while depressing the option and command keys. Rebuild your database
    LN

  • When i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please  help me?

    when i open iphoto i see my photo's for 1 second and then they are gone .The photo's are still there but i can see them only on the bottom or top of my screen when i try to open them i get a sign that it is not possible.Can somebody please  help me?

    Have you upgraded to iPhoto 9.6 for compatibility with Yosemite? If not, try that first.
    It looks like iPhoto has lost the connection between the thumbnails and the original image files.
    This can be caused by a corrupted iPhoto library, or the originals have been deleted or moved.
    Try first to rebuild your iPhoto Library:
    If you do not have a current backup of the iPhoto library, make a copy of the library, but do not overwrite any previous backup.
    Launch iPhoto with the ⌥⌘-key combination (option-command) held down.
    Select "rebuild" from the first aid panel.  This may take a while for a large library.
    Can you now see your photos again?
    If not, rebuild the library with iPhoto Library manager as described by Old Toad:            Re: iphoto crashed

  • HT204003 does the passbook app work on the iPhone4 because I downloaded the apps for it but I continue to see the original screen for the app and I can't find passbook in my settings.

    does the passbook app work on the iPhone4 because I downloaded the apps for it but I continue to see the original screen for the app and I can't find passbook in my settings.

    Some time in the future (Starbucks Tweeted the other day "by the end of the month") the Starbucks app will be Passbook enabled. When that time comes, you will log into the app with your credentials, select your Starbucks card, and you should be given an opportunity to add that card to Passbook at that time. From there, whenever you walk into a Starbucks the alert will be displayed on the lock screen, just slide your finger across the the alert and show your card to pay.
    Now, I have not seen the new app, of course, so I am just speculating based on how the Walgreens, Fandango and Target apps work. Also, I am not sure yet if this will work in any Starbucks, or just the one that you consider your favorite, or primary location. Again, that is just based on how the other apps seem to work. We'll see.

  • Logical level for logical fact table sources

    it is clear that for fact aggregates, we should use the Content tab of the Logical Table Source dialog to assign the correct logical level to each dimension.
    question is : is it mandatory to assign even for non-aggregates fact tables the logical level for each dimension (which normally should be set to the most detailed level of each dimension) ? is it any known issue if "logical levels"in content tab are not set ?
    the reason I'm asking this is a strange bug I have (I'm not going to discuss it here) and then only workaround seems to be NOT setting the logical levels (on content tab) for logical fact table sources.
    thank you !

    If levels are not set: By default levels are considered as lowest level
    It should not matter if you set or not
    Generally we set for facts explicitly when we are using Aggregate tables.
    Your current issue might be a case by case; I would suggest to check implicit fact, any table mapped to the source to force a join etc
    Mark if helps
    Let me know how it helps
    Edited by: Srini VEERAVALLI on Feb 5, 2013 8:33 AM
    Any updates on this?+_
    Edited by: Srini VEERAVALLI on Feb 14, 2013 9:09 AM

  • Where can we see Fact Table And Dimension Table in DataWarehouse Workbench?

    Hai Experts
    where can we see Fact Table And Dimension Table in DataWarehouse Workbench?
    Best Regards
    nvnkmr12

    Hi
    Refer the link below and you will get a comprehensive explanation of how data is stored and modeled in BI. If explains fact table, dimension table, SID table, P and Q , X and Y tables.
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/6ce7b0a4-0b01-0010-52ac-a6e813c35a84
    Cheers
    Umesh

  • What's the best audio interface for Logic Pro and Mac?

    What's the best audio interface for Logic Pro and Mac?

    Depends on the computer model and if you have unlimited funds.

  • Which Mac Pro to buy for Logic Pro and Final Cut Pro X?

    Hi, I'm considering to buy a Mac Pro for my personal studio. I have 2 choices in my mind: 1st one is the "Quad-core (one 3.2GHz Quad-Core Intel Xeon) with 6GB RAM", and the 2nd one is "12-core (Two 2.4GHz 6-Core Intel Xeon) with 12GB RAM". I'll be mainly using Logic Pro 9 and hardcore video editing in Final Cut Pro X. I know the fact that having higher GHz than more cores may benefit you at some point, and only those software applications that are well-written for using multiple cores will be able to utilize the power of 12-core. So, I need to know that are Logic and FCPX are such apps? Are they able to utilize the power of 12-cores or a Quad-core with more GHz will be better? I'm looking for fast operation and smoother workflow, and I'll also be using this computer for a very long time (so, its a major investment!).
    So, the ultimate verdict is to whether to go for more clockspeed or more cores? Money is not the problem here, and I will add more RAMs, SSD according to the need later after couple of months, but considering nothing else I need you to compare between these two machines! If the 12-core machine is even 1% faster I'll go for it, but I don't want to end up spending more money on the machine with will have less power and utility.
    Regards.

    6 core 3.33 1st choice
    8 core 2.93 or higher

  • How important is the MBP L2-cash for Logic 8 and Leopard?

    I want to get myself a new MacBook Pro so that I can also work with Logic 8 at home. The smallest MBP has *3 MB* L2-cash, the two bigger ones have *6 MB* L2-Cash. Shall I take the bigger one for working with Logic 8? Does the L2-Cash make a big difference for Logic 8? I will have 4 GB of Ram in my MBP.
    Thanks!

    The L2 Cache will not be as important as the RAm or HD speed. For Logic, I would recommend the 200GB 7200RPM drive for best performance. If I were to decide between 2.5Ghz with the 5400rpm drive or 2.5GHz with the 7200RPM, i would pick the 2.4GHz 7200RPM.. just my 2 cents.

  • Syntax for logical OR,AND and not equal to

    Hi All,
    In the rtf template we are in need of using logical OR,AND and not equal to .
    <?choose:?><?when:(M= 0 & N=1) | (M= 1 & N=0)?>
    <?end when?>
    <?choose:?><?when:(M!= 0 & N=!1)?>
    <?end when?>
    <?otherwise:?><?end otherwise?><?end choose?>
    Is the syntax used above is correct?
    Thanks in Advance

    Hi,
    Been a while since I look at this sort of thing, but from what I can remember, here goes:
    When you specify an element name in your XML you are actually specifying some XPath. This means you need to use XPath syntax in your <?when....?> clause.
    I think you would need to re-write your statements as follows:
    <?choose:?>
    <?when:(M=0 and N=1) or (M=1 and N=0)?>
    <? end when?>
    <?when:not(M=0 and N=1)?>
    <?end when?>
    <?otherwise:?>
    <?end otherwise?>
    <?end choose?>
    I hope this helps you.
    Regards,
    Cj

  • Ipod touch 1st gen is frozen, all I see is Apple logo for 10 secs and then screen goes black. What's wrong with it?

    My ipod touch (1st gen) is frozen and does not respond. All I can see is the Apple logo for around 10 seconds and then screen returns to black. What is wrong?

    Did you already try to connect in recovery mode and restore? iPhone and iPod touch: Unable to restore

  • L8 is seeing my Axiom as a Logic Control and it's wreaking havoc!

    A new twist on all the control surface issues - I have a M-Audio Axiom 25 connected via USB and it's not setup in anyway as a control surface via the control surfaces preferences. I have never used it as such and never need to because I own a Logic Control.
    All of the sudden, L8 is recognizing midi note input from the M-Audio as LC input - i.e. if I press an A3 it doesn't sound a midi note, but rather performs a specific Logic Control function as defined in the Key Command Preferences.
    Of course, it's even worse because I have an Apogee Ensemble so Logic doesn't even recognize a potential Control Surface unless everything is powered up in just such a perfect way.
    So I have a Logic Control that isn't recognized, and an Axiom 25 that is recognized as something it's not and if I go to Control Surfaces preferences, it's as if the world of cotrollers doesn't even exist because the master list of options is gone baby gone.
    Anyone find a workaround for this?

    totally different ports!
    The LC is connected via my AMT8 - the Axiom is on it's own port via USB, so that shouldn't be issue.
    I've tried cabling the Axiom port directly from the input object to a monitor and then terminating the connection just so I can see what it's transmitting - the "bad" notes don't show up as anything in the monitor and even though I've broken the Sum cable from the input object and the Axiom port is only cabled to a monitor and nothing else (the Sequencer input is not connected to anything at all!), L8 is receiving those key presses as LC commands.
    So strange

  • Dynamic names for I$ ,C$ and E$ tables in ODI

    Dear ODI Team,
    We have a requirement where we are loading header data and then line data in our Package.ODI internally creates work tables to load data into target tables.If multiple sessions of the same interface is executed at the same time the I$table of the previous session affects the I$ table of the next session.Hence if session1 has completed loading then it is at the stage of dropping the I$ table.Hence the second session is erroring out.Kindly let me know if there is an option to create these work table names dynamically for each session
    Thanks ,
    Anand

    Even I an getting similar error trying to use Global variable for dynamic names of the work tables
    Scripts Generated by the IKM :
    create table XDO.#global."gv_test_dynameSSTST_AN"
    ANY_NEW_ID NUMBER(22) NULL,
    ANY_NEW_ATTRIB1 VARCHAR2(50) NULL,
    ANY_CONC_ATTRIB2 VARCHAR2(150) NULL,
    DECODE_CODE1 CHAR(5) NULL,
    ANY_REF_CODE2 VARCHAR2(60) NULL,
    ANY_DATE1 DATE NULL,
    ANY_DATE2 DATE NULL,
    IND_UPDATE char(1)
    NOLOGGING
    Getting the following error on execution :
    911 : 42000 : java.sql.SQLException: ORA-00911: invalid character
    java.sql.SQLException: ORA-00911: invalid character
    at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:282)
    at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:639)
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:185)
    at oracle.jdbc.driver.T4CPreparedStatement.execute_for_rows(T4CPreparedStatement.java:633)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1086)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:2984)
    at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3057)
    at com.sunopsis.sql.SnpsQuery.executeUpdate(SnpsQuery.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.execStdOrders(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTaskTrt(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSqlI.treatTaskTrt(SnpSessTaskSqlI.java)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java)
    at com.sunopsis.dwg.cmd.DwgCommandSession.treatCommand(DwgCommandSession.java)
    at com.sunopsis.dwg.cmd.DwgCommandBase.execute(DwgCommandBase.java)
    at com.sunopsis.dwg.cmd.e.i(e.java)
    at com.sunopsis.dwg.cmd.g.y(g.java)
    at com.sunopsis.dwg.cmd.e.run(e.java)
    at java.lang.Thread.run(Thread.java:595)

  • Creating view cluster for a header and detail table

    Hi all,
    I want to create a View cluster for maintaining 2 tables (one is the header table and other is the detail table)
    ....for each line in the header table there can be multiple detail line items...
    If anyone has worked on such requirement...please tell me how should i go about developing it.
    after creation i should be able to maintain the cluster using transaction SM34....
    Thanks ,
    Sushil.

    hi
    refer to following link
    http://help.sap.com/saphelp_nw04/helpdata/en/d0/999246b2aa11d1a5700000e82deaaa/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/d0/999246b2aa11d1a5700000e82deaaa/frameset.htm
    Cheers
    Snehi

Maybe you are looking for