In BDC Call Transaction, what should be done to move to the second tab
Hi,
I wanted to do BDC Recording, I have done the recording for all the 4 tabs. After recording i gave process, the screen is not going to the second tab, what should be done to move to the second tab
Hi ,
While doing BDC uisng tabs , press enter after entering complete data in every tab. Then go to the second tab and enter data..so on..There is some problem in the recording only. Check the recording multiple times.
Regards,
Jayaram..
Similar Messages
-
Local mode update in bdc -Call transaction method
what is LOCAL MODE UPDATE in BDC- Call transaction methods ?
Hi,
Try to understand from the below CODE
CALL TRANSACTION 'ZBDCSINGLE' USING IT_BDCDATA MODE 'A' UPDATE 'S' MESSAGES INTO IT_BDCMSGCOLL.
REFRESH IT_BDCDATA.
Cheers!! -
I can call facetime my contact/friend but status says "CONNECTING" but doesnt connect. what should be done to overcome/correct it.
I have tried logginf off my account and sign in after restarting my iphone. But it still doesnt help !! Any suggestion/Help is appreciated. Many thanksJudging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
http://www.apple.com/support/systemstatus/ -
Error While Uploading Material Master Through Bdc Call Transaction
Hi Sap Gurus,
I am doing Bdc call Transaction for Material Master Uploading.
But After Entering data for 4-5 screen i got a error_
Field Mara-iprkz doesn,t exit in the screen saplmgmm 4000
Field Mara-prctr doesn,t exit in the screen saplmgmm 4000
Field Mbew-stprs doesn,t exit in the screen saplmgmm 4000
Field Marc-mtvfe doesn,t exit in the screen saplmgmm 4000
Enter Valuation class.
This is my Programme....................................
<removed by moderator>
Thanks in advance.
Arindam
Moderator message: please post only relevant code parts, your post must be less than 5000 characters to preserve formatting.
Edited by: Thomas Zloch on Apr 16, 2011 9:29 PMSorry for my obvious answer, but you should ask a more precise question.
Your errors are that you try to enter fields but they don't exist, so it sounds logic.
And the error "Enter Valuation class." means that the field is mandatory. So you must enter it.
Re-record the transaction using SHDB (eventually play with the http://wiki.sdn.sap.com/wiki/display/ABAP/Recordduringplay), run it in A display mode, and correct your program.
Sandra
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MVKE-SKTOF'
'X'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARC-PRCTR'
wa_mara-prctr."'MUMBAI'.
perform bdc_dynpro using 'SAPLMGMM' '4000'.
perform bdc_field using 'MARA-IPRKZ'
'D'. -
Plz tell me BDC CALL TRANSACTION steps with simple example
hi,
plz tell me the steps
BDC CALL TRANSACTION steps with simple exampleHi,
BATCH DATA COMMUNICATION
About Data Transfer In R/3 System
When a company decides to implement the SAP R/3 to manage business-critical data, it usually does not start from a no-data situation. Normally, a SAP R/3 project comes into replace or complement existing application.
In the process of replacing current applications and transferring application data, two situations might occur:
? The first is when application data to be replaced is transferred at once, and only once.
? The second situation is to transfer data periodically from external systems to SAP and vice versa.
? There is a period of time when information has to be transferred from existing application, to SAP R/3, and often this process will be repetitive.
The SAP system offers two primary methods for transferring data into SAP systems. From non-SAP systems or legacy system. These two methods are collectively called ?batch input? or ?batch data communication?.
1. SESSION METHOD
2. CALL TRANSACTION
3. DIRECT INPUT
Advantages offered by BATCH INPUT method:
1. Can process large data volumes in batch.
2. Can be planned and submitted in the background.
3. No manual interaction is required when data is transferred.
4. Data integrity is maintained as whatever data is transferred to the table is through transaction. Hence batch input data is submitted to all the checks and validations.
To implement one of the supported data transfers, you must often write the program that exports the data from your non-SAP system. This program, known as a ?data transfer? program must map the data from the external system into the data structure required by the SAP batch input program.
The batch input program must build all of the input to execute the SAP transaction.
Two main steps are required:
? To build an internal table containing every screen and every field to be filled in during the execution of an SAP transaction.
? To pass the table to SAP for processing.
Prerequisite for Data Transfer Program
Writing a Data Transfer Program involves following prerequisites:
Analyzing data from local file
Analyzing transaction
Analyzing transaction involves following steps:
? The transaction code, if you do not already know it.
? Which fields require input i.e., mandatory.
? Which fields can you allow to default to standard values.
? The names, types, and lengths of the fields that are used by a transaction.
? Screen number and Name of module pool program behind a particular transaction.
To analyze a transaction::
? Start the transaction by menu or by entering the transaction code in the command box.
(You can determine the transaction name by choosing System ? Status.)
? Step through the transaction, entering the data will be required for processing your batch input data.
? On each screen, note the program name and screen (dynpro) number.
(dynpro = dyn + pro. Dyn = screen, pro = number)
? Display these by choosing System ? Status. The relevant fields are Program (dynpro) and Dynpro number. If pop-up windows occur during execution, you can get the program name and screen number by pressing F1 on any field or button on the screen.
The technical info pop-up shows not only the field information but also the program and screen.
? For each field, check box, and radio button on each screen, press F1 (help) and then choose Technical Info.
Note the following information:
- The field name for batch input, which you?ll find in its own box.
- The length and data type of the field. You can display this information by double clicking on the Data Element field.
? Find out the identification code for each function (button or menu) that you must execute to process the batch-input data (or to go to new screen).
Place the cursor on the button or menu entry while holding down the left mouse button. Then press F1.
In the pop-up window that follows, choose Technical info and note the code that is shown in the Function field.
You can also run any function that is assigned to a function key by way of the function key number. To display the list of available function keys, click on the right mouse button. Note the key number that is assigned to the functions you want to run.
Once you have program name, screen number, field name (screen field name), you can start writing.
DATA TRANSFER program.
Declaring internal table
First Integral Table similar to structure like local file.
Declaring internal table like BDCDATA
The data from internal table is not transferred directly to database table, it has to go through transaction. You need to pass data to particular screen and to particular screen-field. Data is passed to transaction in particular format, hence there is a need for batch input structure.
The batch input structure stores the data that is to be entered into SAP system and the actions that are necessary to process the data. The batch input structure is used by all of the batch input methods. You can use the same structure for all types of batch input, regardless of whether you are creating a session in the batch input queue or using CALL TRANSACTION.
This structure is BDCDATA, which can contain the batch input data for only a single run of a transaction. The typical processing loop in a program is as follows:
? Create a BDCDATA structure
? Write the structure out to a session or process it with CALL TRANSACTION USING; and then
? Create a BDCDATA structure for the next transaction that is to be processed.
Within a BDCDATA structure, organize the data of screens in a transaction. Each screen that is processed in the course of a transaction must be identified with a BDCDATA record. This record uses the Program, Dynpro, and Dynbegin fields of the structure.
The screen identifier record is followed by a separate BDCDATA record for each value, to be entered into a field. These records use the FNAM and FVAL fields of the BDCDATA structure. Values to be entered in a field can be any of the following:
? Data that is entered into screen fields.
? Function codes that are entered into the command field. Such function codes execute functions in a transaction, such as Save or Enter.
The BDCDATA structure contains the following fields:
? PROGRAM: Name of module pool program associated with the screen. Set this field only for the first record for the screen.
? DYNPRO: Screen Number. Set this field only in the first record for the screen.
? DYNBEGIN: Indicates the first record for the screen. Set this field to X, only for the first record for the screen. (Reset to ? ? (blank) for all other records.)
? FNAM: Field Name. The FNAM field is not case-sensitive.
? FVAL: Value for the field named in FNAM. The FVAL field is case-sensitive. Values assigned to this field are always padded on the right, if they are less than 132 characters. Values must be in character format.
Transferring data from local file to internal table
Data is uploaded to internal table by UPLOAD of WS_UPLOAD function.
Population of BDCDATA
For each record of internal table, you need to populate Internal table, which is similar to BDCDATA structure.
All these five initial steps are necessary for any type of BDC interface.
DATA TRANSFER program can call SESSION METHOD or CALL TRANSACTION. The initial steps for both the methods are same.
First step for both the methods is to upload the data to internal table. From Internal Table, the data is transferred to database table by two ways i.e., Session method and Call transaction.
SESSION METHOD
About Session method
In this method you transfer data from internal table to database table through sessions.
In this method, an ABAP/4 program reads the external data that is to be entered in the SAP System and stores the data in session. A session stores the actions that are required to enter your data using normal SAP transaction i.e., Data is transferred to session which in turn transfers data to database table.
Session is intermediate step between internal table and database table. Data along with its action is stored in session i.e., data for screen fields, to which screen it is passed, the program name behind it, and how the next screen is processed.
When the program has finished generating the session, you can run the session to execute the SAP transactions in it. You can either explicitly start and monitor a session or have the session run in the background processing system.
Unless session is processed, the data is not transferred to database table.
BDC_OPEN_GROUP
You create the session through program by BDC_OPEN_GROUP function.
Parameters to this function are:
? User Name: User name
? Group: Name of the session
? Lock Date: The date on which you want to process the session.
? Keep: This parameter is passed as ?X? when you want to retain session after
processing it or ? ? to delete it after processing.
BDC_INSERT
This function creates the session & data is transferred to Session.
Parameters to this function are:
? Tcode: Transaction Name
? Dynprotab: BDC Data
BDC_CLOSE_GROUP
This function closes the BDC Group. No Parameters.
Some additional information for session processing
When the session is generated using the KEEP option within the BDC_OPEN_GROUP, the system always keeps the sessions in the queue, whether it has been processed successfully or not.
However, if the session is processed, you have to delete it manually. When session processing is completed successfully while KEEP option was not set, it will be removed automatically from the session queue. Log is not removed for that session.
If the batch-input session is terminated with errors, then it appears in the list of INCORRECT session and it can be processed again. To correct incorrect session, you can analyze the session. The Analysis function allows to determine which screen and value has produced the error. If you find small errors in data, you can correct them interactively, otherwise you need to modify batch input program, which has generated the session or many times even the data file.
CALL TRANSACTION
About CALL TRANSACTION
A technique similar to SESSION method, while batch input is a two-step procedure, Call Transaction does both steps online, one after the other. In this method, you call a transaction from your program by
Call transaction <tcode> using <BDCTAB>
Mode <A/N/E>
Update <S/A>
Messages into <MSGTAB>.
Parameter ? 1 is transaction code.
Parameter ? 2 is name of BDCTAB table.
Parameter ? 3 here you are specifying mode in which you execute transaction
A is all screen mode. All the screen of transaction are displayed.
N is no screen mode. No screen is displayed when you execute the transaction.
E is error screen. Only those screens are displayed wherein you have error record.
Parameter ? 4 here you are specifying update type by which database table is updated.
S is for Synchronous update in which if you change data of one table then all the related Tables gets updated. And sy-subrc is returned i.e., sy-subrc is returned for once and all.
A is for Asynchronous update. When you change data of one table, the sy-subrc is returned. And then updating of other affected tables takes place. So if system fails to update other tables, still sy-subrc returned is 0 (i.e., when first table gets updated).
Parameter ? 5 when you update database table, operation is either successful or unsuccessful or operation is successful with some warning. These messages are stored in internal table, which you specify along with MESSAGE statement. This internal table should be declared like BDCMSGCOLL, a structure available in ABAP/4. It contains the following fields:
1. Tcode: Transaction code
2. Dyname: Batch point module name
3. Dynumb: Batch input Dyn number
4. Msgtyp: Batch input message type (A/E/W/I/S)
5. Msgspra: Batch input Lang, id of message
6. Msgid: Message id
7. MsgvN: Message variables (N = 1 - 4)
For each entry, which is updated in database, table message is available in BDCMSGCOLL. As BDCMSGCOLL is structure, you need to declare a internal table which can contain multiple records (unlike structure).
Steps for CALL TRANSACTION method
1. Internal table for the data (structure similar to your local file)
2. BDCTAB like BDCDATA
3. UPLOAD or WS_UPLOAD function to upload the data from local file to itab. (Considering file is local file)
4. Loop at itab.
Populate BDCTAB table.
Call transaction <tcode> using <BDCTAB>
Mode <A/N/E>
Update <S/A>.
Refresh BDCTAB.
Endloop.
(To populate BDCTAB, You need to transfer each and every field)
The major differences between Session method and Call transaction are as follows:
SESSION METHOD CALL TRANSACTION
1. Data is not updated in database table unless Session is processed. Immediate updation in database table.
2. No sy-subrc is returned. Sy-subrc is returned.
3. Error log is created for error records. Errors need to be handled explicitly
4. Updation in database table is always synchronous Updation in database table can be synchronous Or Asynchronous.
Error Handling in CALL TRANSACTION
When Session Method updates the records in database table, error records are stored in the log file. In Call transaction there is no such log file available and error record is lost unless handled. Usually you need to give report of all the error records i.e., records which are not inserted or updated in the database table. This can be done by the following method:
Steps for the error handling in CALL TRANSACTION
1. Internal table for the data (structure similar to your local file)
2. BDCTAB like BDCDATA
3. Internal table BDCMSG like BDCMSGCOLL
4. Internal table similar to Ist internal table
(Third and fourth steps are for error handling)
5. UPLOAD or WS_UPLOAD function to upload the data from the local file to itab. (Considering file is local file)
6. Loop at itab.
Populate BDCTAB table.
Call transaction <tr.code> using <Bdctab>
Mode <A/N/E>
Update <S/A>
Messages <BDCMSG>.
Perform check.
Refresh BDCTAB.
Endloop.
7 Form check.
IF sy-subrc <> 0. (Call transaction returns the sy-subrc if updating is not successful).
Call function Format_message.
(This function is called to store the message given by system and to display it along with record)
Append itab2.
Display the record and message.
DIRECT INPUT
Thanks ®ards,
Sravani -
Handling Information Pop-up box in BDC Call transaction
Hi All,
How to handle Information Pop-up box in BDC Call transaction method.
If we can't handle this ,then what is the alternate for this ???
Please I need it urgently ....
Thanks in advanceHi,
Don't worry about information popup box.
Go to SHDB transaction and record the transaction for which u want write BDC using bdc recording. That will handle all the screens accordingly.
Regards,
Sankar -
Improve performance of bdc call transaction
Hi all,
I am performing a batch update of tax codes in a BDC call transaction program. This particular code takes about 3 minutes to process 2,600 entries. I have tried almost everything but is there a way to improve / make it run faster?
I have a feeling it has something to do with the form "do_transaction", but I really don't know anymore.
Thank you in advance.
Attached is the code:
*& Report ZFI_CHANGEWTAX
*& Description: Change Doctors Withholding Tax Code (EI)
*& Using BDC Call Transaction Method
*& Created by : mpena
*& Created on : 07/15/2009
*& Modification History
*& Seq Changed on
*& Changed by
*& 001 07/15/2009
*& mpena Initial Development
*& 002 07/20/2009
*& mpena Logic modification
*& Testing
*& 003 07/20/2009
*& mpena Call function parameter modification
*& 004 07/22/2009
*& mpena Report generation
*& Performance improvements
REPORT zfi_changewtax
NO STANDARD PAGE HEADING
MESSAGE-ID zfk02msg.
TYPES: BEGIN OF t_tax,
lifnr LIKE lfa1-lifnr, "account number
wt_withcd LIKE lfbw-wt_withcd, "current tax code
wt_withcd_new LIKE lfbw-wt_withcd, "new tax code (left blank at default)
END OF t_tax.
DATA: wa_tax TYPE t_tax,
i_tax TYPE STANDARD TABLE OF t_tax,
it_bdcdata TYPE bdcdata OCCURS 0 WITH HEADER LINE,
lin TYPE i.
-------Selection Screen Design -
SELECTION-SCREEN:
SKIP 1,
BEGIN OF BLOCK blk1 WITH FRAME TITLE aaa.
PARAMETERS: p_ktokk LIKE lfa1-ktokk DEFAULT 'DOCT' OBLIGATORY,
p_bukrs LIKE lfbw-bukrs DEFAULT 'SL' OBLIGATORY,
p_wtax LIKE lfbw-wt_withcd OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk1.
INITIALIZATION.
aaa = 'Change Tax Code to specified value'.
TOP-OF-PAGE.
WRITE:
/ 'Update of taxes successful on:', sy-datum, sy-uzeit,
/ 'Generated by:', sy-uname,
/ 'Company Code:', p_bukrs, 'Vendor Group:', p_ktokk.
SKIP 1.
ULINE.
WRITE:
/ 'Account Number', 20 'Old Withholding Tax Code', 50 'New Withholding Tax Code'.
ULINE.
START-OF-SELECTION.
SELECT lfa1~lifnr
lfbw~wt_withcd
INTO TABLE i_tax
FROM lfa1 INNER JOIN lfbw
ON lfa1lifnr = lfbwlifnr
WHERE lfbw~bukrs EQ p_bukrs
AND lfbw~witht EQ 'EI'.
IF sy-subrc EQ 0.
DESCRIBE TABLE i_tax LINES lin.
ENDIF.
Update i_tax with new value of wt_witchd, then display for comparison.
After write: if old and new tax are the same, tax update was not successful for that specific account
or inputted tax type is the same as the old one.
LOOP AT i_tax INTO wa_tax.
wa_tax-wt_withcd_new = p_wtax.
MODIFY i_tax FROM wa_tax.
WRITE:
/ wa_tax-lifnr,
20 wa_tax-wt_withcd,
50 wa_tax-wt_withcd_new.
CLEAR wa_tax.
ENDLOOP.
PERFORM do_transaction USING p_bukrs p_wtax.
*& Form do_transaction
Extracted from ZFKO2 recording accessible in shdb.
FORM do_transaction USING v_bukrs v_wtax.
MESSAGE i000 WITH lin.
LOOP AT i_tax INTO wa_tax.
REFRESH it_bdcdata.
PERFORM bdc_dynpro USING 'SAPMF02K' '0106'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF02K-D0610'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'RF02K-LIFNR'
wa_tax-lifnr.
PERFORM bdc_field USING 'RF02K-BUKRS'
v_bukrs.
PERFORM bdc_field USING 'RF02K-D0610'
'X'.
PERFORM bdc_dynpro USING 'SAPMF02K' '0610'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFBW-WT_WITHCD(01)'.
PERFORM bdc_field USING 'LFB1-QLAND'
'PH'.
PERFORM bdc_field USING 'LFBW-WT_WITHCD(01)'
v_wtax.
PERFORM bdc_dynpro USING 'SAPMF02K' '0610'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=UPDA'.
PERFORM bdc_field USING 'BDC_CURSOR'
'LFB1-QLAND'.
PERFORM bdc_field USING 'LFB1-QLAND'
'PH'.
CALL TRANSACTION 'FK02' USING it_bdcdata
MODE 'N'
UPDATE 'A'.
ENDLOOP.
MESSAGE i001.
ENDFORM. "do_transaction
form for bdc dynpro
FORM bdc_dynpro USING program
dynpro.
it_bdcdata-program = program.
it_bdcdata-dynpro = dynpro.
it_bdcdata-dynbegin = 'X'.
APPEND it_bdcdata.
CLEAR it_bdcdata.
ENDFORM. "bdc_dynpro
form for bdc field
FORM bdc_field USING fnam
fval.
it_bdcdata-fnam = fnam.
it_bdcdata-fval = fval.
APPEND it_bdcdata.
CLEAR it_bdcdata.
ENDFORM. "bdc_fieldYou might want to try using a BAPI instead of a call transaction. I believe "BAPI_VENDOR_SAVECHARVALREPLICA" will work for you. Calling a BAPI is just like calling a function module. After you call the bapi remember to commit it with the function module "BAPI_TRANSACTION_COMMIT".
-
Authorization check in BDC call transaction
Hello gurus,
My requirement is MB1B t-code is not authorized for basis users but only for end user, but when I create a Z-program with a BDC call transaction MB1B it is allowing access.
How is this possible? My boss will ask me this question and I don't know the answer.
Regards,
Krishna
Edited by: Julius Bussche on Dec 2, 2008 10:54 AM
Several errors corrected...
Edited by: Julius Bussche on Dec 2, 2008 2:44 PMHi Krishna Moorthy
To the best of my knowledge you need check the authorization in your program
use AUTHORITY CHECK
for further info take the help of KEY word documentaion
Regards
Ramchander Rao.K
Edited by: ramchander krishnamraju on Dec 2, 2008 10:20 AM -
Firefox crashes every time when I enable a flash plugin. It started today after an automatic attempt of updating shockwave. I've uninstalled flash and installed it again. Still the same story. There are no previous version of flash available on adobe site. What should be done?
I have Firefox 3.6.8 and newest version of Flash. I've followed all recommendations made by Firefox support, changing plug in container settings, changing hang time, nothing helps. I'm forced to disable Adobe Flash or Firefox crashes whenever the Flash plug-in is needed. There are numerous reports of this problem throughout the Firefox troubleshoot help pages. No one seems to have a good answer to fix this. I now keep Flash disabled and use it only when going to a web page that needs it. If I find myself on such a page, I can go into tools, enable flash and do a reload. For some reason, this works. The reload will let Flash do its thing and Firefox won't have an APPCRASH. Once I leave that page, however, I must disable Flash again or I'll experience a crash the next time Flash is called upon. I really like FF but have downloaded Chrome and am now playing with it to see if I like it enough to use it as my primary browser. It's a shame that FF can't come up with a fix as hundreds have the same complaint.
-
Hi,
I am uplaoding CoA profile data using BDC call transaction method, but records could not be uplaoded because of the error " Screen 0000 is too large for internal batch input Area". I didnt understand what is the reason for this error.
Could you plesae help in this?Hi,
Keep the REFRESH KTAB after first Endloop.
Like
LOOP AT ITAB.
LOOP AT KTAB.
ENDLOOP.
REFRESH KTAB.
ENDLOOP.
Edited by: subas Bose on Mar 26, 2010 7:17 PM -
Dif betwen BDC call transaction and session method
Hi to all,
This is my problem. I want to know, what is the difference between BDC call Transaction method and Session method. where the situation we can use these methods.
I will be thankfull to all.Session Method :
Asynchronous Processing.
Transfers Data for Multiple Transactions
Synchronous Database Update
During Processing, No Transaction is started until the previous transction has been written to the database.
A Batch Input Processing log is generated for each session
Sessions can not be generated in Parallel.
The Batch Input Porgram must not open a Session until it has closed the preceding Session.
Call Transaction :
Synchronous Processing.
Transfers Data for a single transaction.
Synchronous and Asynchronous Database updating both Possible.
The Program Specifies which kind of updating is desired.
Seperate LUW for the transaction.
The System Performs a database commit immediately before and after the CALL TRANSACTION Using Statement.
No Batch Input Processing Log is generated.
These are the differences between session and call transaction method.
Call transaction is faster then session method. But usually we use session method in real time...because we can transfer large amount of data from internal table to database and if any errors in a session. Process will not complete until session get correct. -
What should be done when client.connect() failed?
Hi guys,
I am using JCO to connect backend System. If client.connect() is called and for certain reason failed, what should I do to roll back the action so that the system keeps normal. I think client.disconnect is not the solution, because connect is not successful. I encountered this problem, and my portal is totally down, what should I do to avoid this situaltion?
My code is
try{
client.connect();
catch (JCO.Exception e){
//WHAT SHOULD BE DONE HERE?
System.exit(1);
Thanks in advance!
Regards,
LiyingHi,
Can you try this code.
class JCOConnector {
private JCO.Client mConnection = null;
// loginParams will settings for connection
public static boolean connect(Properties loginParams) {
boolean returnCode = false;
try {
mConnection = JCO.createClient(loginParams);
long timeBeforeConnecting = System.currentTimeMillis();
mConnection.connect();
long timeAfterConnection = System.currentTimeMillis();
returnCode = true;
} catch (Exception e) {
try {
disconnect();
} catch (Exception e2) {
throw new RuntimeException(e);
return returnCode;
* To Disconnect from the middleware.
public static boolean disconnect() {
boolean returnCode = false;
if (mConnection != null) { // if connection exists
try {
mConnection.disconnect(); // disconnect from the middleware
returnCode = true;
}catch (Exception e2) {
}finally {
mConnection = null;
}else{
returnCode = true;
return returnCode;
Regards,
Ashwani -
Hi, I have a prepaid visa card but when I want to purchase a product, I face" please contact to Itunes support to complete this transaction". what should I do and how can I contact with Itunes support?
These are user-to-user forums, you are not talking to Apple here and they don't monitor these forums (I've asked the hosts to remove your email address from your post).
You can contact iTunes support here and ask why you are getting the message and how to resolve it : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
Holder(A008) is not maintaing in HRP1001 (BDC - Call Transaction Method)
Dear Friends,
Holder (A008) in HRP1001 is not maintained for some hiried persons through BDC - Call Transaction Method.
Except Holder update eveything is updated in the hrp1001.
When we hire a perosn through PA40, then its automatically maintaining Holder ( A008 ) in HRP1001. But for the same case through BDC program with Call Transaction method, its not maintaining Holder.
What can be reason behind not updating holder in HRP1001. How we can maintain Holder in this case.
Thanks
Rav
Edited by: Rav Jordan on Jan 10, 2012 8:03 AMHi Keshav,
Thanks for your response.
After running
CALL TRANSACTION 'PA40' USING BDCDATA
MODE CTUMODE " 'A'
UPDATE 'A'
MESSAGES INTO MESSTAB.
if sy-subrc eq '0'.
i am selecting perner created from pa0002.
now to update holder i am using fucntion module.
WA_HOLD-AEDTM = SY-DATUM.
WA_HOLD-UNAME = SY-UNAME.
WA_HOLD-OBJID = P_PLANS.
WA_HOLD-BEGDA = DT.
WA_HOLD-ENDDA = '99991231'.
WA_HOLD-OTYPE = 'S'.
WA_HOLD-PLVAR = '01'.
WA_HOLD-RSIGN = 'A'.
WA_HOLD-RELAT = '008'.
WA_HOLD-SCLAS = 'P'.
WA_HOLD-SOBID = GD_PERNR.
CALL FUNCTION 'RH_INSERT_INFTY'
EXPORTING
FCODE = 'INSE'
VTASK = 'A'
ORDER_FLG = 'X'
COMMIT_FLG = 'X'
AUTHY = 'X'
PPPAR_IMP =
OLD_TABNR = ' '
REPID = ' '
FORM = ' '
KEEP_LUPD =
WORKF_ACTV = 'X'
TABLES
INNNN = WA_HOLD
ILFCODE =
EXCEPTIONS
NO_AUTHORIZATION = 1
ERROR_DURING_INSERT = 2
REPID_FORM_INITIAL = 3
CORR_EXIT = 4
BEGDA_GREATER_ENDDA = 5
OTHERS = 6
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endif.
This also not updating holder in the hrp1001 postion in the table.
May i know where to do change in the code so that holder can be maintained.
Thanks
Rav -
Light goes off or System crash During Upload data through BDC Call Transaction ..
Hi Experts ,
How do I know how many records had been updated in database while uploading the flat file through BDC call transaction ,the system suddenly crash or light goes off ..............
Thanks and Regards .
Om prakashHi Prakash,
i have already told toy to use bapi to get all the error and success messages, through which you don't need to do all the above stuffs, the first method you have shown is based on algorithm , which might not be correct each time, and the second method is handy.
You can add these code lines in your BDC which will give you all error and success messages
DATA : BEGIN OF options.
INCLUDE STRUCTURE ctu_params.
DATA : END OF options.
DATA: i_messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE,
l_message LIKE bapiret2-message.
DATA: p_mode TYPE c.
DATA BEGIN OF it_error OCCURS 1.
DATA : text(100) TYPE c.
DATA END OF it_error.
DATA BEGIN OF it_success OCCURS 1.
DATA: text(100) TYPE c.
DATA END OF it_success.
START-OF-SELECTION.
PERFORM upload_data.
* Report for success
PERFORM success_text.
* Report for Error
PERFORM error_text.
END-OF-SELECTION.
CALL TRANSACTION 'your transaction code' USING bdcdata
OPTIONS FROM options
MESSAGES INTO i_messtab.
IF SY-SUBRC NE 0.
CALL FUNCTION 'BAPI_MESSAGE_GETDETAIL'
EXPORTING
id = sy-msgid
number = sy-msgno
language = sy-langu
textformat = 'ASC'
message_v1 = sy-msgv1
message_v2 = sy-msgv2
message_v3 = sy-msgv3
message_v4 = sy-msgv4
IMPORTING
message = l_message.
CONCATENATE l_message '-' wa_input-newko wa_input-wrbtr wa_input-budat INTO it_error-text
SEPARATED BY ' '.
APPEND it_error.
ELSE.
CONCATENATE 'DATA UPLOADED SUCCESSFULLY :' wa_input-newko wa_input-wrbtr wa_input-budat
INTO it_success-text SEPARATED BY ' '.
APPEND it_success.
ENDIF.
REFRESH bdcdata.
CLEAR: wa_input,l_message.
ENDLOOP.
***ENDLOOP.
endform.
" UPLOAD_DATA
FORM success_text .
LOOP AT it_success.
AT FIRST.
WRITE :/10 'Following records successfully uploaded'.
ULINE.
ENDAT.
WRITE :/10 it_success-text.
ENDLOOP.
ENDFORM.
FORM error_text .
LOOP AT it_error.
AT FIRST.
WRITE :/10 'Following records are not uploaded'.
ULINE.
ENDAT.
WRITE :/10 it_error-text.
ENDLOOP.
ENDFORM.
Maybe you are looking for
-
Strange Error when pass variable to PHP
I am passing the following variable from java to a php variable but I am getting an extra character. For example: char c= ' " '; String s1 = "Hello World"; String s2 = c+s1+c;When I pass s2 to a php varibale using URLEncoder.encode(s2) php prints out
-
How to execute PL/SQL query based on given input parameter
Hi all, I have a pl/sql code which is in Region source. It extracts data from database. I want to execute the code based on input I give. I have to give date as a input parameter. e.g. If I give date1 as a parameter, then following code should execut
-
Available the "input data", in BPC version 10
Why do not I have available the "Data Input", in BPC version 10? What permissions should I have? ... I check Use as Input Form option, General tab in Sheet Options; but not available "Data Input" in Ribon EPM Edited by: Ilda Rojas on Feb 8, 2012
-
Stop a service for a composite
Hi Forum - I have a composite which has two services: 1. Web Service. 2. JMS Adapter which is a consumer. This composite has been developed in version 11.1.1.3 and deployed on WLS Now I want to stop only the second service (JMS Adapter which is a con
-
JDeveloper performance unacceptable
Hi, I am using JDeveloper 10.1.3.2.0 on Windows XP (SP2). It runs on a laptop with a 1.8 GHz CPU and 2 Gb of memory. Apart from JDeveloper, I am only running Firefox and MS Outlook. The performance of JDeveloper is absolutely unacceptable. JDeveloper