IN BW UCCHECK transaction for Unicode does not list Transfer/Update rules
Hi All,
We are going to update our BW system to install Enhancement Package 1 SP 7 on our BW 7.0 and we are going also to convert our data base to Unicode.
We used the UCCKECK Transaction to have a list of the abap programs to be modified before the u201Cconversionu201D procedure.
But the transaction does not list the abap code included into transfer rules, update rules and start routines.
Have you an idea to recover them?
And do you think the conversion procedure will abort if these kinds of routines are not adjusted or they will go in error at runtime?
Do you have experienced this problem?
Thanks a lot.
Antonella
Hi Nils, sorry for delay in replyu2026
Unfortunately we started to develop our routines in BW2.0 and checking some of them we receive the error u201CIn Unicode programs, the "-" character cannot appear in names, as it does here in the name "W-DATE" u201Du2026
And further more in subsequent BW releases the same error is only a u201Cwarningu201D into a NON Unicode system.
So I think we should check and correct all our routines before the Unicode conversion.
My best regards, Antonella
Similar Messages
-
BW-BCT-FI-AA : ODS 0FIA_DS11 does not have complete update rule
Dear people,
I hope to get some help on an issue I have with the ODS 0FIA_DS11. I have just installed the full suite of FI-AA Business Content, which includes all the 3 ODS (0FIA_DS11, 0FIA_DS12 and 0FIA_DS13) and also all the update rules and infocubes.
It started when I needed the key figure "Value of the asset at period start" (0***_VAL_PE) from the ODS 0FIA_DS13. After tracing back, this key figure is actually comes from the ODS 0FIA_DS11 and from the key figure 0CACQ_VL_YR. However, in the Update rule for ODS 0FIA_DS11, this key figure (0CACQ_VL_YR) is not being mapped, and thus not loaded. On top of that, I also noticed that there are a few key fgures that are not mapped in the update rule to 0FIA_DS11 as well.
Question, is there a start routine or any routine that populates these key figures that are not mapped in the update rule for 0FIA_DS11? I tried re-installing from Business Content, but the update rule still remains the same. I noticed that there's a routine in Business Content, but it never appeared eventhough I re-install it a few times.
Note that we are using SAP BW 3.5 and BI Content 3.53.
Thanks a lot for your help.Chris
It's all done in the start routine in the update rules of 13 - I am on the same content patch as you..
This is taken from the code as an example
set accumulated values for next datasets.
ADD ls_out-acq_val_tr TO ls_kum-cacq_vl_yr.
ADD ls_out-inv_sup_tr TO ls_kum-cinv_gr_yr. -
[SOLVED] database file for multilib does not exist
Hey guys I ran into a problem today when I tried to install the proper packages I needed to use my wifi card. However when I tried to install it it gives me the error "database file for multilib does not exist" I can t seem to find out why I even tried chrooting into it and installing it that way with no luck. The package I tried to install was "pacman -S wireless_tools netcfg" thanks for the help guys you've been great.
Last edited by bdawg (2012-09-18 22:57:17)bdawg wrote:
Ok so the whole output is as follows:
Warning: database file for 'multilib' does not exist
Error: failed to prepare transaction (could not find database)
And my Pacman.conf is blank
pacman.conf and Pacman.conf (with capital 'P') are two different files. Double-check this.
Are you running a 64-bit system?
Your /etc/pacman.conf should look like this: https://projects.archlinux.org/pacman.g … an.conf.in but with some repositories configured: https://wiki.archlinux.org/index.php/Pa … positories
Last edited by karol (2012-09-18 22:13:59) -
Idoc INVOIC error Baseline date for payment does not exist
Dear All,
I am facing the following error message when processing an idoc to do an MM invoice reception (operation similar to a MIRO).
The payment term is correctly maintained in the purchase order.
Idoc message type INVOIC MM.
Baseline date for payment does not exist
Message no. M8356
Diagnosis
You have tried to post a document without a baseline date for payment.
The system will not allow you to do this.
Check the purchase order. No terms of payment have been entered in the document header or no suggestion has been defined in Customizing for the baseline date for payment for the terms of payment entered.
If you get the error message during automatic settlement of planned delivery costs, maintain the term of payment in the master record (Payment Transactions, Financial Accounting) for the freight vendor or use the Business Add-In MRM_ERS_HDAT_MODIFY to determine the term of payment.
Regards
ArnaudHello,
Date for starting the calculation of the baseline date is indeed managed in the TC OME2 (document date, posting date, etc..).
In my project, there is already some companies using payment term N60N, so it should be possible to continue using it.
I solved this issue by putting a payment term in the vendors master data (company & purchasing views) and also in the customers views (company / sales orga) otherwise the structure of the idoc is different.
Thanks anyway for your input.
Keep in touch.
Regards
Arnaud -
Hi
I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
Anyone who can help? Thanks..
Br. BoGet a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
Or try the methods apple recommends..
OS X Yosemite: Set permissions for items on your Mac
It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive. -
I want to transfer a movie I have bought in itunes to my new IPAD. I have been trying to work how to do this for 3 days now. I have accessed all the itunes help and forums and wiki online. They all tell me to go to the DEVICES tab on itunes and select IPAD then sync. YUP seem simple, BUT there is not DEVICES tab listed on my itunes and it does not list IPAD. Years ago I set up my IPOD no problem and that is listed, but not the new IPAD. Can anyone help? I would love to be able to actually watch films on my IPAD!! thanks
If you have iTunes 11 on your computer then you can enable the left-hand sidebar on it via option-command-S on a Mac, control-S on a PC - when connected (and if your computer's iTunes is up-to-date) your iPad should then appear on that sidebar under a 'Devices' heading :
If you select the iPad on that sidebar you can then use the Movies tab on the right-hand side of the iTunes screen to select and sync that film to your iPad's Videos app.
Has your iPad been synced to the computer before ? If not then you might find this page for syncing to a new computer useful : https://discussions.apple.com/docs/DOC-3141 -
Follow-up posting flow type Credit for 870 does not exist
Hi SAP,
I am having a problem when try to recalculate cash flow in FO38. System popup error Message no. 62179 (Follow-up posting flow type Credit for 870 does not exist). The error details is like this:
Diagnosis
You have changed the data in such a way that follow-up postings have resulted.
No follow-up posting flow type has been defined for Credit for the flow type 870. A proposed flow type for flow type 3NCH has not been defined either.
System Response
Processing cannot be continued without the flow type.
Procedure
Contact your system administrator.
Procedure for the system administrator
Check and correct the settings for the reference flow type for follow-up postings in Customizing as required.
Is there any setting in configuration Txn SPRO should i do? Will give points for those who help me out this problem.
TQ
Regards,
NazrulHi Nazrul,
yes, there are reference flow types missing for follow-up postings. Follow-up postings are created if condition amounts have been changed and that affects already posted items in the cash flow. In this case follow-up postings are generated. For the follow-up postings the system uses special flow types that have to be maintained in customizing.
SPRO - Real Estate - Conditions, Flow Types, Account Determination - Maintain Flow Types - Assign Reference Flow Types
Relevant relationship keys are:
2 IS-RE: Follow-up postings due to condition incr.
32 IS-RE: Follow-up posting due to condition reduct.
You have to assign reference flow types for these relationship keys.
This should help.
Regards, Franz -
Short key for copy does not work all the time now.
After I have installed the latest OSX - Yosemite, my short key for copy does not work all the time. It is infrequent how it works. I'm using the same keyboard that I have always used, my wireless logitech keyboard for mac. Please help.
I've plugged in my default mac keyboard and the short key copy still does not work.
-
IPad Air 2
version 8.3
i can no longer see my attached mail as word, excel or PowerPoint for it does not prompt me to downloadIs it possible you mistakenly clicked on a [Clear Layout] button?
But a great hint is- Always click on the [Create a Saved Book] button, early in your new book design.
Then you have a permanent link to the book in the Collections panel. (In addition to the standard collection of your selected images)
Note: a Book Collection shows an icon that looks like a book.
Every time you come back to edit the book, open the Book Module by clicking on the white arrow that appears on the end of your Book Collection title. (The title as saved)
Re-opening a book without using the "Saved Book" option can have unpredictable results.
A "Book" Collection is like a "Smart Collection" because anything you do to the book design, change pages, change images, etc, is automatically updated in the Saved Book collection. -
I purchased PSE 13 but have a Vista OS. It was suggested in this chat room that I download PSE 12. I did that & installed 12.
The serial # for 13 does not work. Any thoughts on how I can get a serial number for PSE 12?Hi
There is a newer version of Resolution+ Plug-in released for an Qosmio X series
[Resolution+ Plug-in v 1.1.2004|http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory =2&selFamily=381&selSeries=231&selProduct=7506&sel ShortMod=null&language=13&selOS=all&selType=400&ye arupload=&monthupload=&dayupload=&useDate=null&mod e=allMachines&search=&action=search&macId=&country =all&selectedLanguage=13&type=400&page=1&ID=82406& OSID=30&driverLanguage=42]
try it out...
If it has not been installed properly, try rebooting your computer and reverify. -
Adobe Photoshop Elements 12 for Mac does not show up in Applications. Tutorial for editing from iPhoto shows selecting the Adobe software in Applications. Am I missing a step in registering product?
I answered my own question: There's a difference between "download' and "install." Hunt for "install" (1.5 hrs in my case) and line up your passwords, Adobe ID, etc, then install. Took 15 min. The right choice shows up in Applications. Now it's on to figuring out why photo selected for edit in iPhoto does not show up on screen in Elements.
-
Reflow in Adobe Reader for Android does not work
The reflow option in my Adobe reader for Android does not work. The PDF book I am trying to read is too wide to be legible when I fit it into the screen (even in landscape), but the reflow button doesn't change that. When I click it, nothing happens. The only thing I know to do is to uninstall and re-install, but that did not work. Any other tips or ideas?
Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan -
Endpoint Protection error: The source folder for content does not exist.
I have a single SCCM 2012 SP1 CU4 server running on Windows Server 2012.
I have been using this for a little more than a month for Endpoint Protection and Windows Updates.
I just recently started seeing that my Endpoint Deployment Package has Failed. I click on "Content Status" and select the Endpoint package (which again shows Failed). I click on "View Status" and I get this
message in the "Error" tab:
The source folder for content does not exist.
The Asset Details point to the exact location that does not exist:
The source directory "\\<server>\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" for package "<package>" does not exist.
I didn't change anything related to this, and that directory path (\\server\updates\endpoint) is
shared and is populated with a lot of other folders.
Is this possibly just a bad update file? Should I manually create that sub-folder that it says is missing?
Any help would be great! Thanks!Thanks for the quick reply, Torsten. (I often forget which logs to check for certain things).
There are six lines (3 errors -- in italics below) in the log around the same time frame. They read:
The source directory \\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68 doesn't exist or the SMS service cannot access it, Win32 last error = 2 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM
5920 (0x1720)
STATMSG: ID=2306 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.962 2014 ISTR0="\\sccm-corp\updates\endpoint\6bd81fde-3a3f-4aa9-bf70-ba007891ca68" ISTR1="PDC00063"
ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to take snapshot of one or more contents in package PDC00063 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
CDistributionSrcSQL::UpdateAvailableVersion PackageID=PDC00063, Version=10, Status=2302 SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
STATMSG: ID=2302 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_DISTRIBUTION_MANAGER" SYS=SCCM-Corp.pdcarea.lcl SITE=PDC PID=6008 TID=5920 GMTDATE=Tue May 27 16:54:46.990 2014 ISTR0="Endpoint Protection Definition Updates" ISTR1="PDC00063" ISTR2="" ISTR3=""
ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=1 AID0=400 AVAL0="PDC00063" SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:46 AM 5920 (0x1720)
Failed to process package PDC00063 after 33 retries, will retry 67 more times SMS_DISTRIBUTION_MANAGER 5/27/2014 11:54:47 AM 5920 (0x1720) -
Source port type for BPELProcess does not match target port type for EJB
Hi gurus,
I have a problem with calling EJBs from a 11.1.1.3 composite. The following summarizes the issue:
- there are several EJBs within the same package deployed on a WLS server.
- these beans have method names that are the same, for example create(), delete() etc.
- using the EJB Service Adapter I have created 3 References, one for each of the 3 beans I need to invoke in a BPEL process.
- each bean is imported into the project with their own *.wsdl *Ref.wsdl files.
- each wsdl imports a namespace based on the java package name
- now i have 3 wsdls, importing the same namespace and namespace conflicts arise.
At this point I'm thinking, 'no problem, just change the namespaces manually'
- whenever i try to change the namespace that JDev gives the Reference components I end up with the compilation error:
Source port type for "BPELProcess" does not match target port type for "EJBRef"
It seems that the namespace must be the same as the package name, even though I resolved all the references to the new namespaces and ensure they all match.
The problem appears to be in the BPELProcess.componentType file.
<reference name="HelloEJBRef" ui:wsdlLocation="HelloEJBRef.wsdl">
<interface.wsdl interface="http://package.workspace.com/HelloEJB#wsdl.interface(HelloEJB)"/>
</reference>
If the namespace (text before the #) is changed at all from the default, even if it matches the wsdl, results in the port type mismatch error above.
Any ideas?
btw, running SOA 11.1.1.3, JDev 10.1.1.3, EJB 3.0Hi gurus,
I have a problem with calling EJBs from a 11.1.1.3 composite. The following summarizes the issue:
- there are several EJBs within the same package deployed on a WLS server.
- these beans have method names that are the same, for example create(), delete() etc.
- using the EJB Service Adapter I have created 3 References, one for each of the 3 beans I need to invoke in a BPEL process.
- each bean is imported into the project with their own *.wsdl *Ref.wsdl files.
- each wsdl imports a namespace based on the java package name
- now i have 3 wsdls, importing the same namespace and namespace conflicts arise.
At this point I'm thinking, 'no problem, just change the namespaces manually'
- whenever i try to change the namespace that JDev gives the Reference components I end up with the compilation error:
Source port type for "BPELProcess" does not match target port type for "EJBRef"
It seems that the namespace must be the same as the package name, even though I resolved all the references to the new namespaces and ensure they all match.
The problem appears to be in the BPELProcess.componentType file.
<reference name="HelloEJBRef" ui:wsdlLocation="HelloEJBRef.wsdl">
<interface.wsdl interface="http://package.workspace.com/HelloEJB#wsdl.interface(HelloEJB)"/>
</reference>
If the namespace (text before the #) is changed at all from the default, even if it matches the wsdl, results in the port type mismatch error above.
Any ideas?
btw, running SOA 11.1.1.3, JDev 10.1.1.3, EJB 3.0 -
Adobe Reader for Blackberry Does Not Support Fillable Forms
I've discovered that the version released for Android does support fillable forms, but the version for Blackberry does not. I assume Blackberry did not develop the app so what gives?
Mehwish,
Thank you so much for responding, and so quickly. I appreciate it.
It does not appear as though the PDF I am trying to read would have an element in it that would block it from reflow, but that is always possible. It’s a textbook, and I understand that toward the end of the book there are some charts and diagrams, but I haven’t gotten to those chapters yet. So far, I’ve just been trying to use the Adobe Reader to read the introduction and first chapter and nothing I have done has made it reflow.
I’m enclosing a copy of the entire book. Perhaps you can uncover something in it that I didn’t see.
Thanks again for you help.
Stan
Dr. Stan G. Duncan
123 Sumner St.
Quincy, Massachusetts 02169
617-855-7539 (hm)
781-504-6875 (cell)
215-647-7583 (fax)
508-295-1630 (Ch)
<mailto:[email protected]> [email protected]
<http://homebynow.blogspot.com/> http://homebynow.blogspot.com
<http://www.huffingtonpost.com/stan-duncan> http://www.huffingtonpost.com/stan-duncan
Maybe you are looking for
-
Audio tracks no longer showing up on timeline
Hi, I've been using Premier Pro for several months now with limited problems but just recently I'm no longer able to get audio tracks to show up on the timeline of my projects. When I go into older projects and import new AVIs, the audio won't show u
-
I have down loaded faulty towers and they have been listed in my music. Also down loaded a film where eagles dare (the buyable version) and I cannot find it. Help please
-
Why can't I use Paypal for iTunes in The Netherlands?
For some time now I have been trying to complete my account so I can finally make purchases from the iTunes store. Today I tried again hoping that there would finally be a payment option besides credit cards. I was delighted to see the paypal option.
-
The Apple Store states that the minimum spec required to run an ACD is an intel iMac. I "only" have a G5 iMac, will I be able to hook up a 20" ACD to extend my desktop? Cheers
-
Deploying Oracle Forms with Plss and dlls in Client/Server
Hi, I have a form application which has two plls libraries attached to it - d2kwutil.pll and d2kcomn.pll and one dll - d2kwutil.dll. All these libraries are necssary for the app to work. The issue come when I am trying to deploy them in different env