In CJ20N, unable to change the "Person Responsible"

Hi,
In cj20n, When I create a new WBS under a project, the system defaults the Person responsible from the Project level.
The field is display only and I am unable to change it. There is no substitution active in the project profile.
Could anyone help me to change the config so that the user can maintain the "Person Responsible" at the WBS level for the existing projects & the newly created projects.
Thanks in advance
WD

Hi.
Dd you check (OPUK) the field selection settings for this field? You can make it editable entry in there.
Regards
Sreekanth

Similar Messages

How to change the Org Data depending on the Person Responsible?

Hi Group,
I have a requirement relating to Org data changing as :
while creating the activities in CRM, by default I was getting the Org data for the person responsible ( whoever has created the Activity ).
there is a provision that, we can change the Person Responsible for the Activity.
and when the Person Resp is changed, the Org data also to be changed accordingly....
But, this was not happening due to some technical reasons....
So please give me some inputs as how to change the Org data according to the changes to the Person Resp.
Thanks in advance.
Regards,
Vishnu.

for this u have to maintain the rules profiles and attach this to transaction type for header or item category
documentaion is there
spro ->MD->org managment ->org data deter -->change rules and profiles

I cannot change the persona on my laptop! I've tried, but the new persona only stays on while I'm online. It's not being saved or something. What's going on?

About a month or so ago, I did get a nasty piece of malware called SystemCheck on this laptop, but I believe I've gotten rid of it. God knows I've scanned the laptop a million times over and it's come up clean (using both Spybot and Malwarebytes).
Prior to this malware, I had no problem changing the persona and being able to keep the new one. Now I can't. Is this SystemCheck still haunting me?
Here are the specs for my Laptop:
XP-SP3; Compaq Evo N610c; 1.00 GB of RAM
I can't find any troubleshooting guide for this issue.

Hi DawnStorm,
You should look at the article [[Preferences are not saved]]. It could be the Firefox is just unable to write to the prefs file.
Hopefully this helps!

Unable to change the data in PSA

Hello All,
I have a delta failure because of invalid characters in one of the field and now i wanted to change the PSA. I have deleted the request from all data targets and started changing the error record, it is not showing all columns from PSA hence i am unable to change the data in required field.
Could you please let me know how will i see all columns from PSA. Thanks
Regards,Ashok

Hi Ashok,
To increase/decrease the number of columns that are displayed on the menu from the Settings option select Change display variants
Also if you want to see say all the failed records you can sort the order of the data using the Status column

Unable to change the data source of SAP system

Dear all,
We have install SAP netweaver EHP1 standalone java on oracle 10.2.0.5 on windows 2008 R2.
while installation i have given the central SLD system as solman,
By mistake i have deleted the system from SMSY.. now when i createed the system manually i am unable to change the data resource as SLD due to this i can start my SMD configuration
Request please let me know how to resolve this issue.
Thanks
Paresh

Hi Paresh,
You can proceed with deleting your SAP system from SMSY (along with connected technical content such as AS Java definition) and the run the LANDSCAPE FETCH through transaction SMSY_SETUP to have the correct definition of your SAP system in SMSY.
Following this, you could use the addon Landscape Verification (a new thing I learnt today!!!) to check the correctness of transaction SMSY. The following link details the Landscape verification 1.0 for SolMan:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e093b3ce-c034-2d10-01bc-b51f1691d3da?quicklink=index&overridelayout=true
Hope this helps sort out your issue.

I have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

i have the 2.5GHz i5 macbook pro that came out in june of 2012, i updated to OSX version 10.8.1 and now i am unable to change the 3.5mm headphone output into an input.

I changed my Apple ID for an iphone 4s and need to change the iCloud Apple ID/password. I am unable to change the Apple ID under the iCloud account information without the password which no longer exists. How can I update my phone?

I had to change the Apple ID used for my iphone 4s. How do I change the Apple ID for the iCloud information? - the old Apple ID/password no longer exists and this information is requested to make a change. I am unable to change the Apple ID for the iCloud account.

Apple IDs never go away, so it still exists.
But lets be clear. You actually stopped using an Apple ID and created a NEW Apple ID. You didn't just change the email address of your Apple ID? That means that all of the music and apps purchased with the old Apple ID will have to be purchased again.
If you really did create a new Apple ID you will need the password associated with the old one to disable Activation Lock. There is no way around this. As I said, the old one still exists. You can use the standard tools to recover the password at https://appleid.apple.com.

Unable to change the entries in SM30

Hi all,
In my program i am inserting records using MODIFY DBTAB.
COMMIT WORK.
After the prog execution i hv to change the entries in the DBTAB.
I am unable to change the created records.
Can u pls explain me what is happening here?
Thanks in advance
Praveen

To be able to use SM30 to modify any data in a database table you need to have a maintenance dialog generated for that table.
If you have one generated depending on the type of the dialog (maintenance allowed with restrictions) you will still not be able to modify the data.
If you need to change data through SM30 you should either create (or change to maintenance allowed without restrictions) and regenerate the table maintenance dialog. Make sure that the existing dialog doesn't have any customization to it because that will all be lost after regeneration.
The other option to change the data is would be through SE16 and debugger or through a program.
Hope that helps,
Michael

Unable to change the status of a project to approved

Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.

R4S wrote:
Dear Members,
I am using the Oracle Vision Instance version 12.1.3 and Database 11.2.0.3.0
I have created a project. I am unable to change the status of the project to APPROVED. I am getting the below error:-
Please enter an active project manager for this project in order to change or update this information._
Can any one please help me in resolving this issue.
Many thanks in advance.
Regards.Please see these docs.
CMRO Partially Implemented Visit Errors with "Please enter an active project manager for this project in order to change or update this information" [ID 864812.1]
Update_Project Erroring With PA_PR_INSUF_PROJ_MGR While Creating Task For Templates [ID 1085068.1
Thanks,
Hussein

I am unable to change the admin account

Hello, I'm unable to change my Administrator password.
Computer model: MacBook Pro (mid 2012), not Retina.
OS: OS X Mountain Lion.
There's a network account server in my settings.
Admin account info: Admin, Managed, Mobile.
I have tried to change the password via System Settings and via Terminal (passwd command line).
When I try to change it in the Terminal, it just echoes out "passwd: general failure".

Oh, okay.
I was once able to change the password, and then I changed the password of my account in their Microsoft Exchange Server.
And after that, I was unable to change the password on my Mac.

Including the name of the person responsible in service notification (IW51)

Hi!
I want to include the name of the 'person responsible' who is responsible for processing a specific notification. How should it be done.

Hi,
IMG>Cross-Application Components>Overview of Notification Type.
Select the notification type S3 - service request, double click on partner functions.
chose valid partner function for person responsible field.
In IW51, enter notification type S3 and press enter.In customer address screen, execution segment you can see the person responsible field
Regards,
Chandra

I am unable to change the preferences on my Premiere Pro CC 2014 program...Please help!

Hello, I use Premiere Pro CC 2014 on my Mac Computer. I am unable to change the settings in the preference of Premiere Pro. When I change a setting and click "OK" Premiere doesn't respond. I can click cancel and the window closes, but when I click ok the window does not close. Since Premiere doesn't respond when I click ok, any setting that I have changed remains the same. I tried reinstalling the program, but after the installation I still have the same issues. Does anyone have a solution?

Hi,
What preferences exactly? Are you trying to change them under Premiere > Preferences? What OS are you on? Can you please attach a screenshot?
Thanks,
Rameez

My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

My MacBook Pro speakers are stopped working and on screen volume icon shows in gray colour I am unable to change the volume.

Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers.
    Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
    Try this even if you don’t see the red light.
3. Reset PRAM. http://support.apple.com/kb/PH14222
    Do this twice
4. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so,uncheck it.
6. System Preferences > Sound> Sound Effects
    Play sound effects through:
   Select "Internal speakers" and then back to "Selected sound output device".

HT4623 The apple ID on my Iphone 5 is different from the ID on my computer or my itunes ID.   I am unable to change the iphone ID. Thanks

The apple ID on my iphone 5 is different from the ID on my computer, my iTunes and Apple account.   I am unable to change the Apple ID on my pone even with syncing to the computer and itunes.    Thanks.

Rudegar,
     I appreciate your advice.    I followed your instructions and it changed.   I am grateful for the insight.
Thanks

Is there I way I can reload the google calendar as I am unable to change the views or go forward or backward by weeks.

Is there a way to reload the Google Calendar program on my laptop? Currently, I am unable to change the views. It is always on the current week. I cannot get the daily view either. Thanks!!

This would not seem to be an Apple issue at all, much less for Apple Remote Desktop. These forums cannot help you with setting up Google Calendar on a Windows system. Perhaps you would be better served by taking your question to a forum related to Google's apps or at least a Windows forum.
Or did you just forget to include details about what computer you're actually asking about?

In CJ20N, unable to change the "Person Responsible"

Similar Messages

Maybe you are looking for