In day 4, video # Creating "pages" with Flex states doesn't work

i can't open video training http://www.adobe.com/devnet/flex/videotraining in day 4. it's name( Creating "pages" with Flex states ) doesn't work, it report error. supporter can look it and solve problem

Hi,
I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA

Similar Messages

Broken Link - Offline - Day 4 - Creating "Pages" with Flex states

Hi,
This is an excellent series!!
When accessing the Day 4 - Creating "pages" with Fex States in offline mode, Adobe Media Player, complines "Playback failed - This media file is corrupt or malformed". Can you please fix it and let me know so that I can restart the download?
Thanks.

Hi,
I'm also pacing the same issue. if click on the video in the Day 4 exercises. i don't know, what is the issue with that particular videos. and also pacing one more issue that design mode is not showing in my flash builder 4. if u have any ans plz help me out. PFA

Term-Driven Page with Friendly URL doesn't work with a page in another Site Collection

Hi all,
It appears that the Term-Driven Page with Friendly URL does not work when it is referencing a page in another Site Collection. When I set my Managed Navigation to use a term that points to another Site Collection page, the link shows in my navigation, but
gives the error:
"Sorry, something went wrong"
This does not happen if I link to a page in the same site.
Kelly
Personal Blog: http://thebitsthatbyte.com

i got similiar (i am not sure whether the same) issue recently:
I have a site collection (address http://spserver/) which use managed navigation, and term-driven page with friendly url. The address of the term-driven page is set as /pages/teamsitehome.aspx . A friendly url takes the form such as http://spserver/menulevel1/submenu1
I create a new site collection http://spserver/sites/newsitecollection and i want it to have the same navigation menu as the other site collection. Since i cannot use the same termset for the two site collection, i have to create a new term set
for the new site collection, "pin term with chidrem" or "reuse term" to the old term set. The friendly url in newly created site collection and term set takes the form such as http://spserver/sites/newsitecollection/menulevel1/submenu1, and still
points to /pages/teamsitehome.aspx. Notice that the term-driven page here in the new site collection still points to the old site collection.
Actually, it works! I mean, when i click the navigation menu, friendly url http://spserver/sites/newsitecollection/menulevel1/submenu1 appears in the browser address. And SharePoint knows to load /pages/teamsitehome.aspx for this url. If this is a simple
blank page, it just open fine here.
However, my custom page teamsitehome.aspx calls TaxonomyNavigationContext.Current.NavigationTerm in its page load event, it should returns a valid NavigationTerm for the friendly url. But it returns null here. I traced the code to find that it calles
internal static NavigationTerm GetNavigationTermFromTargetUrlGuids(SPWeb contextWeb, Guid termStoreId, Guid termSetId, Guid termId, bool includeInheritedSettings, bool enableExclusions)
The passed in contextWeb points to http://spserver/ , since the term-driven page is in this web. But the termSetId points to the new termset. TermId won't be problem, since its the same in both new and old term set for pinned term. The combination of contextWeb
and termSetId just make the output NavigationTerm null. I think its simply because the termset is not associated with this spweb.
My workaround is create a copy of /pages/teamsitehome.aspx in new site collection. The term-driven page address is set to ~sitecollection/pages/teamsitehome.aspx in term management. This time, all works. Just because the contextWeb parameter i mentioned
above now points to the root web at new site collection, where the term driven page resides.

How to create Rules with Flex Field mapping in the bpm worklist

I Have created a flex field label and was able to map to the flex field attributes .
But when i try to create a rules , I don't see the label or the flex attributes in the task payload .
Can someone please help is understanding how to create Rules with Flex Field mapping in the bpm worklist .
Even I am also searching for any scripts which will take the flex fields prompts and can directly create a label in the bpm worklist .
Any pointers or suggestion is highly appreciated .

Hi,
SE38 -> Enter program
Select Variants button and display. In the next screen, enter a variant name, (If not existing , press Create to create new one), else click on Change.
Now the selection screen will display with a button "Variant Attributes" at the top.
Click on that button.
In the next screen, go to the selection variable column of the date field. Press F4 or drop down and select 'D' for date maintenance.
In the column "Name of Variable (Input Only Using F4)" press F4 or drop down, select whichever kind of date calculation you want and save the variant.
Now whenever you run the prgrm with this variant, date will be displayed by default.
Regards,
Subramanian

ITunes 10.4 full screen with Win7-64bit doesn't work correctly.

iTunes 10.4 full screen with Win7-64 doesn't work correctly. I have the Windows taskbar on the left side of my screen. Maximized iTunes is panned to the left.

Same issue here. When the Windows taskbar is position on the top of the screen and then the iTunes windows is maximised, it's position is as if the Windows taskbar is at the bottom of the screen so the top of the iTunes window sits under the taskbar.
For those wanting a workaround, hold shift and right click the iTunes icon in the taskbar/quick launch bar and click restore, at least then you can adjust it to be full screen manually.
System:
Windows 7 Ultimate x64
iTunes 10.4
ATI 5750 video card

Create Slideshow Display sequence property doesn't work

Create Slideshow Display sequence property doesn't work,
I have selcted random but the slideshow always plays in order. I searched the scripts for any logi related to this and other properties set, but cannot find any refernce to any of these propoerties:
transType='Random' transTime='1' firstImage='1' dispSequence='1'>
How can I make the slideshow start with a random image each time?
thanks
s

Hello,
I am back on this question, about how to get the non-flash version of the Creatr Slideshow v1.6 to display the images in a random sequence. Can anyone point me in the right direction, please?
thanks
juno

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......

Hi, I've used four different Groups when emailing for the past few years, and suddenly they have stopped working. I've tried creating new Groups but that doesn't work either. I haven't changed or done anything different and it is driving me mad......can anyone help, please?!

Thanks for that information!
I'm sure I will be calling AppleCare, but the problem is, they charge for the phone calls don't they? Because I don't have money to be spending to be on the phone with a support service.
In other things, it seemed like the only time my MacBook was working was when I had Snow Leopard without the 10.6.8 update download that was supposed to be done to prepare for OS X Lion.
When I look at the information of my HD it says that I have 10.6.8 but that was the install that it claimed to have failed and caused me to restart resulting in all of the repeated problems.
Also, because my computer is currently down, and I've lost all files how would that effect the use of my iPhone? Because if it doesn't get fixed by the time OS 5 is released, how would I be able to upgrade?!

Why tethering with USB cable doesn't work after IOS6.0 update?

why tethering with USB cable doesn't work after IOS 6.0 update?

Try updating the carrier settings, if that doesn't do it try following along with this Apple doc -> iOS: Troubleshooting Personal Hotspot

LAN with TCP/IP doesn't work

Hello,
I have a problem with my laptop IdeaPad S10e 4187-5PG: LAN with TCP/IP doesn't work, after I have updated all the drivers to the latest ones form the Lenovo site (except BIOS update). I tried to check if LAN worksby sending a ping to the IP address and that is OK, but when Isend a ping to the default gateway it failes. A ping to the DNS server also fails.Could you please help me because I tried everythinh and I can't getthe LAN to work.
Thank you very much

Perhaps you could describe you network in a little more detail.
Is this a Workgroup home network or are you connected to a Domain server?
If this is a workgroup are you connecting to the internet via a cable or DSL router?
Do other computers on your network connect OK?
Has your S10e ever worked properly on the network?
Are you connecting via a wireless access point or LAN cable?
What do you Ping on and from where?
Can you Ping OK on another networked computer?
Open up a DOS Prompt (aka command prompt, DOS Box). and type IPCONFIG /ALL <enter>. Do you get a compatible IP address and subnet mask? You should also get the gateway IP address.

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

Every Programme that it is opened with Adobe Reader doesn't work What Can I do ?

More information please.
Version of Reader? OS? Can you open reader by double-clicking on its icon? Can you open reader by double-clicking on a pdf file? What programs are trying to open reader? Some programs might be restricting your ability to view pdf files using the Reader plug-in due to security concerns. If this is the case you need to find out how to enable the plug-in in the case of each application.

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Comcast came to fix my internet. My AIRPORTWIFI now only works with desktop. it doesn't work with my IPhone or IPad. Why? What can I do?

Hello lila54,
It sounds like your Wi-Fi network is working if your desktop works with it, we just need to get the Wi-Fi on your iPhone and iPad connected to it. I found a couple of resources to help with not being able to connect to Wi-Fi on an iOS device.
I recommend following the steps in this tutorial first (the steps should work on the iPhone and iPad):
Join a network
http://www.apple.com/support/iphone/assistant/wifi/
If you are still having trouble connecting to Wi-Fi, follow the steps in this article (you can skip any steps you have already taken):
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/ts1398
Thank you for posting in the Apple Support Communities.
Best,
Sheila M.

Video Display Problems with Flex Builder 2

I am currently trying out the Flex Builder 30-day trial and
have been having problems running the software.
System info:
FB 2.0.1
Dell Latittude D820 running WinXP
NVIDIA Quadro NVS 120M Video Card
When I first installed it, my display turned to garbage and I
had to reboot my machine to get it to a usable state. Someone
suggested changing my display properties and see if it helped. When
I tried 768X1024 with 8-bit color it worked. Once I installed it, I
changed them back to 1920X1200 32-bit. Everything seemed to work
fine until I started getting into some more complicated tutorials.
My display crashed and looked similar to what I saw before. I
updated to the latest NVIDIA driver from Dell. No help. I then
tried the Windows Troubleshooting. When I turned my hardware
acceleration to None, it started working again. There are some
weird display issues with menu buttons and I can't launch my Nvdia
software.
Is there a better solution to this? Has anyone had this
problem? I'm not so sure I'll purchase the software with this many
problems.
Thanks,
Wendi

Boys n Girls
I am Currently restoring my Power Book after a significant meltdown.
Thanks for posting I too saw the shearing effect but shrugged it off thinking oh well I'll just reboot!
If you are seeing this Buy a fire wire drive NOW and Back-up.
I suspect the Video update changed a low level feature in the power management routines and this resulted in my Power book cooking itself.
I've got a 12mth old Hitachi 7200 PATA drive in my Power Book after the Apple Drive cooked itself soem tim back and I have now got to back-up and restore my whole system. Luckiliy I have plenty of Big fast firewire drives around so I'm imaging the corrupt drive and going to run the Hitachi tool on it via a WINDOZE Thinkpad. Then a combination of clean install of 10.5.x and a migration assisted restore should do it.
I'm really not very happy though! My Time machine image did not restore and the disk repair did not work. I have a corrupted asl.DB ( the log file for Apple System Logs) and the mac won't boot from its internal drive.
I'll post the resolution here as it happens I'm at hour Disaster + 24 so I'm really cranky!
I suggest If you have a G4 Power Book you resist the temptation to install the video update.
Regards

How can I create pages with different backgrounds

Hello,
I'm creating flash site which will have different backgrounds for each page. I'll load the individual pages with "MovieClipLoader." My understanding about MovieClipLoaders is that, it doesn't matter the background of your mc, the page to which you are loading will maintain it's background.
How do I achieve that?
Thank you!

Hello,
Thanks for the reply, I think it's a very good suggestion. I'm going to try it out and I hope to fill you in.
Thanks once again.

Create game with Flex?

Hi all
this might be a stupid question, but me really not well
understand what Flex was, and what the Flex purpose.
me have download the trial version of flex, and found it seem
more focus on coding and exclude the drawing things which similar
to Flash.
my question : is it possible to create Flash game with Flex ?
what could be done in Flash is it possible to done in Flex
too?
thanks

hi,
With flex you need to envoke the filereference function save. Because of the security sandbox you can not programmatically save files or create folders, you need to open a windows file browse box then the user can create a folder or save a file.
private function testme():void
var fi:FileReference = new FileReference();
fi.save("hello"); <=== this would open a system file save dialogbox
David.

How create page with two frame (google geocoding BSP)

Hi all,
can someone suggest me how create an BSP application with the main page composed by two frae?
I've create a page with tags <htmlb> gridLayout for ape the frame structure and the result is fine.
here the screenshot of what i've done: http://img17.imageshack.us/img17/3558/bspgeolocalization.jpg
But now i've to call the right page frame ( obviously in his frame) from the left page controller after pressing the 'search button'
and passing to it a table.
someone has an idea?
Thanks in advance,
Davide

checkt his thread
Web template keep loading/refreshing in BSP
though the question is for different purpose, you can find the code for framed pages there

In day 4, video # Creating "pages" with Flex states doesn't work

Similar Messages

Maybe you are looking for