IN DESIGN version.7.0.4

I cannot open old documents after upgrade to Maverick on Mac Book Pro. It tells me I need plug ins.
I have upgraded to latest version but It still does not open.

You can't. You are trying to open a file saved in a newer version of ID. You either need to upgrade tot he correct version or ask the person supplying the file to send you a .IDML file instead (withthe understanding that waht you see when you open it may not be exactly the same as the original.

Similar Messages

  • Designer Version for O9i ver.  9.2.0.1.0 ?

    Hi,
    Where can i get Oracle Designer version that goes with Oracle 9.2.0.1.0 for Win2K ?
    I have downloaded the ones currently available -
    A99230-01.zip
    A99231-01.zip
    But these are for 9.0.2.0.1 and while installing this on top of 9.2.0.1.0, it gives error "Oracle9iAS cannot be installed into an existing Oracle9i 9.2.0.1.0 or higher Oracle Home"
    There seems to be a version mis-match. Where can i get the latest one for my 9.2.0.1.0 ?
    Thnx.

    Hi Suneet,
    There is actually no 9i Designer version 9.2.0.1.0.
    From the information you provided, it seems you are
    trying to install the full 9iDS pack (9.0.2.0.1) on
    the top of a 9.2.0.1.0 database, which I would not
    advise. Install the products in this way:
    1) 9i database 9.2.0.1.0 into one home
    2) 9iDS 9.0.2.0.1 pack into a separate home
    3) 9i Designer 9.0.2.5.0 into the iDS home
    9i Designer 9.0.2.5.0 is available from our Designer
    pages here on OTN.
    Hope this helps.
    Regards,
    Dominic
    Designer Product Management
    Oracle Corp

  • How to check Adobe Live Cycle Designer version in ABAP Workbench ?

    Hi,
    Please advise how to check Adobe Live Cycle Designer version in ABAP Workbench ? Currently i am using NW 7.0 SP18 (ABA,BASIS).
    Thank You and Best Regards
    Fernand Lesmana

    There are 3 ways you can check which version of ALD you have installed on your machine.
    1. Go to transaction SFP (Forms Builder) transaction and enter a form name. Select Layout and it should open Adobe LiveCycle Designer. From ALD select Help --> About section and it should give you version details.
    2. Go to SE80 and open an Interactive form application. Select the InteractiveFormUI element and click edit. This will open the ALD. From ALD select Help --> About section and it should give you version details.
    3. A more simpler way is just go to C:\Program Files\Adobe on your machine and there should be Designer folder there for e.g. Designer 7.1 / Designer 8.0 / Designer 8.1
    Chintan

  • Content of textfields is gone, when using LiveCycle Designer Version 8.2

    Hi there,
    I´m having a Problem with LiveCycle Designer in Version 8.2 (exactly 8.2.1.4029.1.523496). When It try to open a PDF-document containing an AcroForms-Form with some textfields, I can see all the textfields of the document, but their content (the text) is missing, I only see the empty fields.
    When I use LiveCycle Designer Version 8.1 (exactly 8.1.1.3021.1.438934) everthing works fine. The xml-sources produced by the two differnt LiveCycle-versions look different, too.
    Is there any known bug or something, which could explain this behaviuor?
    Thanx a lot
    Chris

    Hi Paul,
    in the attachment you´ll find the pdf-Document and two xdp-files which I
    generated with LiveCycle 8.1 and 8.2. They look pretty different, e.g. in
    8.2 all of the
    Kopie
    Thema
    Content of textfields is gone, when using
    LiveCycle Designer Version 8.2
    Not that I am aware of ....I assume you mean that when you open the form
    in Acrobat the data is gone ...can you send the form and data to
    mailto:[email protected] and I will have a look when I get a chance.
    Paul

  • Ou trouver, sur le site d'Adobe, la mise à jour de ma version CS5 Design (version éducation) ver CS6

    Ou trouver, sur le site d'Adobe, la mise à jour de ma version CS5 Design (version éducation) ver CS6

    I am sorry Almimufré can you please restate your inquiry?

  • Livecycle Designer version

    Hi all,
    I have a problem for which I need to upgrade from version 8.0 to 8.2.
    1. Does anyone know if there is a release that works with SAP? (I need to use it in Tcode SFP) Is this supported allready?
    2. And where can I find which ADS works with which designer version.
    Kind regards

    I have upgraded the Adobe Acrobat Profession v8.0 to v8.1, but the Designer is still version 8.0 and the problem still exists.

  • UI Theme Designer Version

    Hi Experts,
    How can I get the version of UI Theme designer.
    Thanks in advance.
    Akhil

    Hi Akhil
    call transaction /n/ui5/theme_tool
    and press on SUPPORT
    There you get the theme Designer version.
    Hope that helps.
    Kind regards,
    Carola

  • How to read Crystal Report file Design version programmatically

    Hi,
    I am working on a project where I need the read Crystal file header and extract information that which designer was used to create the (Crystal) report. This will help me do some specific task if the version of the crystal used is very old (say older than 7.0), relatively new (say between 7.0 and 11.0) and the latest (11.0 or later).
    I have downloaded the SDK and all the dlls, but I just couldn't find any API or function using which I can get this info.
    Could you please let me know if there is any way to read this information programmatically from a crystal file?
    (I know this info can be seen in Crystal designer, but I need to do it at runtime).
    Thanks.
    Edited by: addi2011 on Mar 14, 2011 2:02 PM

    Unfortunately, not enough info...
    if you are using CR for Eclipse, please post your query here:
    SAP Crystal Reports, version for Eclipse
    Before you do, I'd highly recommend having a quick peek at this:
    What do I need to do to get the fastest issue resolution?
    If you are using BI, post your query here:
    Java SDK Application Development
    - Ludek
    Senior Support Engineer AGS Product Support, Global Support Center Canada
    Follow us on Twitter

  • Cannot delete anything in Oracle Designer version 10.1.2.4 get RME-02014

    did not occur in version 10.1.2.3
    seems to be a new bug introduced in version 10.1.2.4
    fixed by:
    alter system set "_optimizer_cost_based_transformation"=off scope=both;
    see thread
    Does Designer 10g work on 11g

    My problem is solved . I was using wrong jar file...
    Thanks Francois.......It is a great tool!!!!
    Edited by: Nishu on Jun 16, 2010 3:00 PM

  • Output Designer version 5.6  vs. 5.5

    Hi there,
    I am new to Output designer. I opened a .ifd file that was created in version 5.5 and tried to test presentment(the data file is a xml file) and i got error: #2210 unable to open data file. it can be successfully tested in version 5.5. Please advise.
    Thanks.

    Hi
    I had a similar problem and was given this suggestion
    Update the winmerge.ini file
    When attempting to use an XML data file in Test Presentment, the error #2210 Unable to open data file will appear.
    This problem occurs because several areas in the file winmerge.ini are not updated properly during installation.
    You can rectify the problem by updating these areas. The file winmerge.ini is located in the Output Designer installation directory, by default C:\Program Files\Adobe\Output Designer 5.6.
    The first area is in the [Paths] section.
    As shipped, this section specifies:
    [Paths]
    ExePath=[EXEPATH]; Full path of directory holding executables
    EtcPath=[SERVERDIR]; Full path of directory holding configuration files
    LibPath=[EXEPATH]; Full path of directory holding DLLsUpdate the three pathing values to point to the installation directory.
    For example, if you installed Output Designer to the default directory, update the [Paths] section as follows:
    [Paths]ExePath=C:\Program Files\Adobe\Output Designer 5.6; Full path of directory holding executables
    EtcPath=C:\Program Files\Adobe\Output Designer 5.6; Full path of directory holding configuration files
    LibPath=C:\Program Files\Adobe\Output Designer 5.6; Full path of directory holding DLLs
    The second area is in the [XftMdf].
    As shipped, this section specifies:
    [XftMdf]
    JfXftMdfCommandLine=[EXEPATH]\JfXftMdf @P1. @P2.
    Again, update the pathing value to point to the installation directory.
    For example, if you installed Output Designer to the default directory, update the [XftMdf] section as follows:
    [XftMdf]JfXftMdfCommandLine=C:\Program Files\Adobe\Output Designer 5.6\JfXftMdf @P1. @P2.
    Adobe Enterprise & Developer SupportKnowledge Article ID: c4744 When attempting to use an XML data file in Test Presentment, an error message is returned.

  • ADS vs LiveCycle Designer - version match?

    Hi,
    Is it possible to upgrade LiveCycle Designer frequently and still use one and the same ADS, or are there any rules when it comes to their versions matching?
    Thanks!
    KR,
    Igor

    if you check note 1522483 1359778 1176858, they tell you which version of LCD can be used with which version of ADS.

  • Copia de repositorio de Oracle Designer version 10.1.2.6

    Estamos trabajando en un repositorio del Oracle Designer v.10.1.2.6.  Necesitamos hacer una copia de un repositorio creando uno nuevo para modificaciones especiales.
    Hemos intentado con el export/import y copia los objetos (tablas, diagramas) pero no sus elementos (columnas, triggers, etc).
    Necesitamos realizar una copia ya sea por fuera (copia del datafile) y attacharlo al Designer, o realizar la exportacion de todos los elementos de un container sin controlar las dependencias.
    Como podriamos lograrlo??
    Gracias!

    My problem is solved . I was using wrong jar file...
    Thanks Francois.......It is a great tool!!!!
    Edited by: Nishu on Jun 16, 2010 3:00 PM

  • Designer Version 5.4 and 5.6

    Hi there,
    We just bought Adobe Output Designer 5.6 hoping it solves some of our page fidelity problems.
    On the contrary we find that, without making any changes using the same .DAT file and testing the presentment in the designer, the output is drastically different from what it used to be 5.4.
    Few observations:
    Fields that are printed in the foundation page MUST use ^global instead of ^field in 5.6
    5.6 simply scans from the top, does not match the name in the ^field or ^global command, instead simply fills the values in the positions. For example, if the .DAT file has first_name, initial and second_name but in the MDF, it only has initial and second_name, when testing the presentment, firt_name value is filled in initial in MDF, initial value is filled in second_name in initial.
    I have an impression that 5.6 is more rigid compared to 5.4.
    I haven't completed the observations fully. But is that likely to happen? Where can I get to know the differences between 5.4 and 5.6?
    I thought it'll be a breeze to upgrade, looks like it is not!
    Please help
    Bharathan

    1. If you build your domains in Designer and generate your modules from there, and set dynamic list to NO, the poplist order will be the order of items in the domain. If you set dynamic list to Yes, so your values and meanings are in CG_REF_CODES, there is no ordering.
    So you can get the ordering you want, but not using the REF_CODES table. See issue 2.
    2. It's hard to use the built-in domain logic (and table API) and not put in allowable values. But you can just put in a single value, set dynamic list = YES, and put your values into CG_REF_CODES. Of course, that means you won't get the ordering that you would if you kept your allowable values in the domain.
    As an alternative, take a look at the domain key constraints. That's one way to manage your own table(s) of allowable values.
    -- jim

  • Designer version 6 - is it available for download anywhere

    Is Designer 6 available for download anywhere ?

    Try this link:
    http://otn.oracle.com/software/products/ids/content.html
    Look under the heading:
    "Previously Released Products"

  • I want to swap the language of my CS 6 Web and Design version from English to German.

    How does this work, from where can I get the language files?

    Change product platform or language
    You can swap languages/platforms for a latest version product if you follow the instructions at the following link:
    http://helpx.adobe.com/x-productkb/policy-pricing/order-product-platform-language-swap.htm l

Maybe you are looking for