IN F-58 screen check are getting print in disorder way

Hi all
Could you please give me solution .i have an issue when i gave print check in f-58 screen check are getting printed in disorder like 1,2,6,9,5, it should be in serial like 123456789way please guid me how can make it correct to print in serial order

Hi Abdulla,
in tcode F-58 select check box Do not Void any Checks
Regards,
Sreehari

Similar Messages

Check Proposal is Run but Checks are not Printed-need to cancel the run

The Accounts Payable Check Proposal is Run but Checks are not Printed- I need to cancel the run. How do I do this ?
Points will be awarded.
Thanks.
Kathy

Restart
If the printer stops during printing, for example because of a power failure, you will need to restart
the print program.
1. To do this, choose System   Services   Reporting.
2. Enter the name of the print program (RFFOUS_C) and select Program   Execute.
3. Enter the data identifying the print run and enter the check number from which the
program should be restarted in the Restart field.
4. Select Program   Execute again.
If there is a system crash during the print run but before any checks have been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
2. Delete the check information. To do this, choose Environment   Check information
Delete   For payment run.
3. Restart the print program but do not use the restart option described above.
If there is a system crash during the print run and some checks have already been printed, you
should proceed as follows:
1. Correct the error that caused the system to crash.
This error may occur, for example, when a check lot is used up and the next lot has not
been maintained. In this case, the first thing to do after the system crash is to enter a
new check lot. See: Maintaining Check Lots [Page 7]
2. Delete the check information. To do this, choose Environment   Check information
Delete   For payment run.
3. Restart the print program but do not use the restart option described above.
4. Delete the print output from the print management files.
5. Now restart the print program, this time using the restart option, (see above).
PAGE 25 IN CHECK MANAGEMENT PDF FILE FROM HELP.SAP. TO DOWNLOAD CLICK ON BELOW LINK
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/FIBP/FI-BL-BM-CM.pdf
ASSIGN POINTS IF HELPFUL.

AP Supplier Checks are not printing in Payment Batch EBS 11i

Hello Gurus,
We have a list of suppliers about 15, and having inovices for that suppliers . when we do a payment in batch , that specific supplier invoices are not getting printed in the payment batch, the other invoices which of other suppliers[other than that 15 suppliers], those invoices are correctly printing in the checks.
We have checked the terms date also.
Please let us know how can we trace the cause for it.

Hi,
for the Invoices of 15 suppliers, the invoices are getting selected in the payment batch and payment is made. Only it is not getting printed on the reportss ? OR the invoices for those 15 suppliers is not getting selected at all .....
What is the status of those invoices in Invoice workbench after the payment batch is confirmed ?
Regards,
Ivruksha

To get print copy no dynamically

Hello Abapers,
My requirement is to get the print copy no. dynamically.I am getting the print copy no. dynamically when i press print button beside the print preview button .But my requirement is to get same dynamic print copy no. when i press print button on print preview screen.but it is not coming when i press on print button in print preview screen it is getting print but the dynamically copy no. is not changing.

Hi Krishna,
please check your code with below code, here PRIN is for printing and PRIV is for preview
DATA : P_CONTROL_PARAMETERS TYPE SSFCTRLOP OCCURS 0 WITH HEADER LINE.
DATA : I_OUTPUT_OPTIONS TYPE SSFCOMPOP.
IF PRIN = 'X'.
     P_CONTROL_PARAMETERS-PREVIEW   = ' '.
     I_OUTPUT_OPTIONS-TDNOPRINT     = ' '.
     I_OUTPUT_OPTIONS-TDNOPREV      = 'X'.
     I_OUTPUT_OPTIONS-TDNEWID       = 'X'.
     I_OUTPUT_OPTIONS-TDIMMED       = 'X'.
ENDIF.
IF PRIV = 'X'.
     P_CONTROL_PARAMETERS-PREVIEW   = 'X'.
     I_OUTPUT_OPTIONS-TDNOPRINT     = 'X'.
     P_CONTROL_PARAMETERS-NO_DIALOG = ''.
   ENDIF.

Checks are not generated after Automatic payment run

Hello,
I have a strange issue. Payment has been executed normally through APP. However some of the checks are not printed and it is not gone to PAYR table as well. I can see the payment documents in REGUH table and the documents have been cleared. This is not a new vendor and the check payments have been made to this vendor through this process.
Could you please suggest what could have gone wrong as PAYR & REGUH table and payment list from ZF110 must match. Here it matches only REGUH & Payment list from ZF110. The vendor has been asking for the payment and we realized this issue
Thanks
Ivan

Please check if relevant print variants have been assigned in the relevant check print program (RFFOUS_C for e.g.). If you have posted in 3 company codes and assigned check print variant in only 2 company codes, then some of the checks will not be printed even if the payment document has been posted.
As part of business process, it is always useful to print the payment list and reconcile atleast if the number of expected checks have been created.
Ron

Reports not getting printed

My reports are not getting printed on Laser printer.I am using psl132.prt file in desformat. After giving the print command, printer showing message "Processing Job" for 5 sec and after that it is showing "Data Received" and "Ready " message. My reports are character mode. Some of my reports are getting printed using the same prt file.

psl132.prt is postscript landscape - you need different .prt file, or change your report to bitmap.

Deperaction Area 32 screen is not getting dispalyed in Production Via ABAA.

Hi,
When we are trying to Post the unplanned depreciation on prior-year acquisitions (640) via ABAA, we are getting an error message that Deprecation Area 32 should be Zero, We have check the OADB ( Display view asset accounting: define depreciation area) configuration setting, where Posting to G\L is maintained as u2013 0 (No values are posted in General Ledger). Then we have advised the key user to make the value ZERO for Deprecation 32 when he posts the unplanned depreciation on prior-year acquisitions via ABAA.
But the problem here we are facing in Pre production server (XZB) when we post unplanned depreciation on prior-year acquisitions via ABAA where we are getting THREE Pop window screens like Deprecation Area 02, 32, 90 but when we are doing the same in Production Server (PZB) where we are getting TWO Pop window screens like Deprecation Area 02, 90, Deprecation area 32 pop window screen is not getting displayed, can some help me in resolving this Issue.
Thanks a lot in advance.
Rajesh Kumar Mantri

hi,
Check in t-code OABU whether your area allows UP depreciation.The setting in OABU should NOT be contradictory to the
selection made inside the depreciation area .Means,if you select the option "no values allowed" for unplaned depreciation, in the
definition od depreciation area, then it wil overwrite the setting in OABU.
I guess this is the reason fior your issue.
Hope this helps.
Regards
Raghav

I cant print and get this message, "adobe elements, "the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing."

I keep getting this message when trying to print in adobe elements, I am using a new Epson WF-3640 printer
"the saved printer information is not compatible with this version of photoshop elements, or the saved printer is no longer available. you will need to check with your printer settings before printing.

Hi,
If you are working in PSE13, please update it to latest PSE13.1 update available and see if it helps.
To apply update, you can go to Help > Updates and there you can see PSE13.1 update.
Thanks,
Anwesha

Why do I get a colored shadow behind shadow and feather transparency areas when printing?

Hello,
I've been pulling my hair out over this and finally went to my printer to ask if they had insight as to why this is happening. I'll include his reply here but would like to hear your expert opinions too!
When laying out a file in InDesign, I do a lot of overlapping, feather and some drop shadow and always get a colored shadow behind the transparency area when printing out from a pdf. These files are being designed for print, which is what I thought InDesign was created for - as an updated alternative to Quark and Pagemaker? Here is what the printer says:
"Ive taken a look at the file in question and the issues this lady is experiencing can not be resolved in InDesign. What she needs to do is build the background image with color overlays all in Photoshop as a Layered PSD. Then flatten it and pull it in to InDesign as a Tiff. Then she can place her text over the top of it. She needs to use image masks on the color overlays - for the areas she does not what the color to violate.
What it comes down to is these fancy design effects out of InDesign and Illustrator should never be used for printing. They can be used for web design. Reason is, they cause RIP problems. Things fall off the file and transparent areas go away just to name a few. This happens all the time."
I would appreciate any other viewpoints here. Can I really NOT use the shadow and feather functions in InDesign for print? Are there any other ways to approach this problem other than what is being advised here. It is SO much easier to produce the entire file in InDesign.
Here is a link to the pdf. If someone would like to see the original indd file, I can post it somewhere.
http://displaysunlimitedinc.com/test/panel_3_text.pdf
There is a 1 inch blur drop shadow on the black and white temple image; a 1 inch feather on the black and white screened back image behind the main text box; and no drop shadow or feather on the map at top right, yet I get a colored shadow behind all 3 of these areas when I export the indd file to pdf and print that out. The fact that I get a shadow behind the map puzzles me.
Thank you very much in advance.

Horgycat,
The CMYK/RGB question is actually pretty complex, and depends to a great extent on how the final output is going to be produced.
If the files are destined for a printing press, all RGB elements must be converted to CMYK prior to printing. You have the option of doing that before placing in ID, or during export to PDF, and there are pros and cons to both methods, but if you don't know until the last minute what the print conditions will be, the convert on export path is more flexible.
Spot colors are a different matter. As far as I'm concerned, you should NEVER specify a spot color unless you are actually using spot ink on a press. A lot of inkjet and laser devices claim to be Pantone certified, but the reality is that even with expanded gamuts available using more than four inks, I'd estimate that better than half the Pantone solids are not reproducible as simulations that would satisfy me or my clients. The convert spot to process route should only be used, in my opinion, when you've designed a job properly to be printed using spot colors, and suddenly you have an output change or an added image that forces you to move to a process output. The last time I tried it, by the way, I had issues at the printer (the regular prepress guy was out of town, so I'm not sure what went wrong) and I ended up re-building the file with real process colors to get the transparency to work.
But you mentioned that you are doing exhibition panels, which implies to me that they are probably NOT going on a press -- you need to do hundreds, or sometimes even thousands, of copies to make a press cost-effective compared to digital printing. I used to work in a large-format output bureau doing just this kind of work, and we used large inkjet plotters. In this case, mixed RGB and CMYK files are less of an issue since most plotters will handle either, and depending on if they have an internal or external RIP or none at all, you may actually get better color fidelity using RGB as CMYK colors may get converted in the RIP to the RGB values that the plotter understands, and then get converted back a second time to CMYK (CMYKOG or whatever ink combination is used) internally before the ink is sprayed. Only the print provider would be in a position to tell you the correct color space for the equipment.
Which of course puts you at a bit of a disadvantage working with a client out of state who isn't supplying you with such necessary information as the correct output profiles for the job. It will be a miracle if the color is close.
A final word about looking funky on screen. Just as many spot colors can't be well simulated in CMYK, many also cannot be displayed adequately on a monitor. The ONLY way to choose spot colors is with a swatch book, and that's what the press operator will be using to verify his work. Clients need to be educated about the differences in technology and the limitations of soft proofs.

When using Pages, I can't seem to print an envelope. I use file, then print, and see the printer icon come up in the dock showing it received the info but then quickly disappears and nothing gets printed. When I check the printer queue there is nothing

Bear with me, I've not done this before. I can't seem to reliably print an envelope when using Pages. I go to "file" click "print", click "ok", see the printer icon flash in the dock with a red "1" (indicating a printing job), but then the icon disappears and nothing gets printed. I checked the printers queue and there is nothing there. The funny thing is, after many times hitting "print", twice I've had envelopes printed. ??? What's the secret?

Have you tested it from other software, such as TextEdit to establish that it is in fact Pages that is the problem?
Step us through Print Setup... and what you select when you send it off to print.
Peter
From the
Brother MFC-6800 Printer's User Guide:
How Can I load envelopes:
You can load envelopes from the multi-purpose sheet feeder. Your appliaction software must be set up to print the envelope size you are using. This is usually done in the Page Setup or Document Setup mebnu of your software. Refer to your appliaction manual
It also mentions an issue with paper thickness.

How do I get prints to look as good as on screen?

How do I get prints to look as good as on screen?
Do apple recommend a printer?

I recognise this but the prints never look as good as they do on the screen why is this? They are always lighter, darker and just not as punchy. It's very inconsistent.
Do apple recommend a printer that replicates exactly what's on the screen?

I want to share files from iMac to MacBookPro. In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service." What do I need to FIX???

I want to share files from iMac to MacBookPro. In "Sharing" setup I want to check "screen Sharing" but get the error message"Screen Sharing is currently being controlled by the Remote Management service." What do I need to FIX???

Care to share which OS you are using?
Have you read for possible solutions over in the "More Like This" thread over here?----------------------->

The words in the .docx (MSWord 2010) file are getting merged when the file is transferred to another computer for printing. What could be the reason?

The words in my .docx file are getting merged when the file is transferred to another computer for printing. For eg. the sentence "rate of success ......" is displayed as "rateof success" on the other computer. What could
be the reason for this? How to solve this issue?

Have you checked that the document is using the exact same font on both machines? If the second machine doesn't have the font installed that's used in the original document on the first machine, Word will pick the closest matching font, and that may
display slightly differently.

Getting error "Screen output area too small"! Please help!

I am getting an error "Screen output area too small" when looping through some huge internal table and sending to spool "on change of some value" in my internal table. Could someone please help me in correcting this? Rewards assured.
Thanks.
Mithun

Check the simple program and have tested ,it works great( IN ECC 6 Version)
REPORT ztestspool.
DATA : arc_params TYPE arc_params,
v_print_parms TYPE pri_params,
w_valid TYPE char1,
w_valid_spool TYPE char1.
CONSTANTS : lc_paart LIKE sy-paart VALUE 'X_65_132', " Paper Format
lc_locl TYPE sypdest VALUE 'LOCL', " Destination
c_x TYPE char1 VALUE 'X'.
Setup the Print Parmaters
CALL FUNCTION 'GET_PRINT_PARAMETERS'
EXPORTING
    authority              = space
    immediately            = space
    new_list_id            = c_x
    no_dialog              = c_x
    user                   = sy-uname
IMPORTING
    out_parameters         = v_print_parms
EXCEPTIONS
    archive_info_not_found = 1
    invalid_print_params   = 2
    invalid_archive_params = 3
    OTHERS                 = 4.
IF sy-subrc NE 0.
CLEAR : v_print_parms.
ENDIF.
The printer destination has to be set up
IF v_print_parms-pdest = space.
v_print_parms-pdest = lc_locl.
ENDIF.
Explicitly set line width, and output format so that
the PDF conversion comes out OK
*v_print_parms-linsz = c_linsz.
v_print_parms-paart = lc_paart.
NEW-PAGE PRINT ON PARAMETERS v_print_parms NO DIALOG.
*PERFORM display_output.
write :/ 'This is test for spool generation'.
NEW-PAGE PRINT OFF.
Thanks
Seshu

On the top left of my computer screen there are what look like the bottom half of small grey and white squares stacked on top of each other. They form a line about three inches long and I cant seem to get rid of them. Is my computer dying or being hacked

On the top left of my computer screen there are what look like the bottom half of small grey and white squares stacked on top of each other. They form a line about three inches horizontally along the top and they cover half of the regualr bar (so half of the apple sign int he corner is covered) and I cant seem to get rid of them. Is my hardrive crashing or being hacked?

I have never seen DEVELOP on the menu bar for Safari, hence my query regarding testing.
What OS are you using and what version of Safari?
If you want to check your HDD, Open Disk Utilities>First Aid and run Verify and Repair.
The only remedy that I can think of that may work is an OS reinstall.
I seriously doubt that your MBP is being hacked.
Ciao.

IN F-58 screen check are getting print in disorder way

Similar Messages

Maybe you are looking for