In fbl1n report for document type RE withholding tax amount is not showing

in fbl1n report for document type RE withholding tax amount is not showing
in sap note 363309 determines
Solution
Remove the field which contains the withholding tax information (field BSEG-QSSHB) from your display
variant.
If you want to display the withholding tax information, double-click on the document number and
subsequently choose 'Withholding tax'.
my doubt is we remove the field BSEG-QSSHB in layout how can show the withholding tax amount in FBLIN report
how to remove from the layout
please clarefy
bhayyapu

Hi,
If you want to check amounts of withholding tax for the vendors, you have some options to view it. You can access the WITH_ITEM, LFC1 tables by SE16. You have too the S_P00_07000134 report. This report is developed for the Colombia but I already used for the another country with the ABAP development for this country.
Also you can use table join BSIK and WITH_ITEM by SQVI for the open items and BSAK and WITH_ITEM for cleared items. It is more simple and fast.
JPA

Similar Messages

WHT amount not appearing in FBL1N report for Document type RE

Dear Friends,
While running FBL1N report for any vendor where TDS is applicable, the WHT amount is appearing for KR document type. But when it is RE document type the WHT amount is not appearing in the report. How can we resolve this? Any enhancement/any note to be applied?
Regards,
Ramkumar

Hi,
FBL1N is having the classic withholding tax field hence please don't refer the those fields.
please don't refer those fields.
Please review attached note 363309 for detailed explanation.
BSEG-QBSHB is designed to fill for the classic withholding tax. And
extended withholding tax information is stored exclusive in table
WITH_ITEM.
You can check in table BSEG for the fields and will find that system
do NOT update field BSEG-QBSHB.
In your line layout,you define a field BSEG-QBSHB. But actully the field
of vendor/customer line item is filled with zero from FI. Thus,it shows
zero in line item display.
And as note 363309 says,
"Remove the field which contains the withholding tax information
from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'."
Regards
Madhu M
Edited by: M Madhu on Jan 18, 2012 9:13 AM

Withholding tax amount is nit showing in FBL1N

Hello,
When I go to FBL1N and selected "Withholding tax amnt" and "With.tax base amount"from the layout, Withholding tax amount is not showing documents posted through MIRO, but it is showing for documents posted through FB60.
Can any one kindly advise
Regards,
Lakshman.

Please be kindly aware that:
in Extended withholding tax, the withholding tax information is stored
in table WITH_ITEM. For a vendor or customer line item of table BSEG,
there maybe a lot of withholding tax information and therefore several
entries in table WITH_ITEM.
It is not technically possible to display a lot of withholding tax
information for a customer or vendor line item in the line item display.
To always keep the data consistent when you use several withholding tax
types, the system does not update the fields, that were originally
filled for the classic withholding tax, for document changes.
All of the relevant withholding tax data is stored exclusively in table
WITH_ITEM.
It basically does not make any sense to use the withholding tax fields
of the document line items (BSEG-QSSKZ, BSEG-QSSHB, BSEG-QBSHB) with the
activated extended withholding tax.
Solution:
Remove the field which contains the withholding tax information
(fieldBSEG-QSSHB) from your display variant.
If you want to display the withholding tax information, double-click on
the document number and subsequently choose 'Withholding tax'.
Please go through the note 363309.
About MIRO please be informed that You can see the WT data into MIR4 only if You insert them manually. If not the WT tab remains empty but the System correctly will fill the WT data into the FI follow on document.
I hope this helps.
Mauri

FBL1( VENDOR LEDGER REPORT)- Withholding tax amount is not coming .

in FBL1 ( vENDOR lEDGER rEPORT) - WITHHOLDING TAX AMOUNT IS NOT CMING IN COLUMN QBSHB OF FBL1.
Purchasing document number is not coming also.
How these fields may appear in the above said report. Is any config missing ?
Thanks in advance
M K Agarwal
9967029930

TDS posted from MIRO will not reflect in line item report, i have taken opinion from SAP for the same issue few days back, SAP has given the following opinion.
*With reference to the difference in behaviour as compared to the document posted for example from MIRO which is an MM transaction and FB60 which is a FI transaction please note the following:
The withholding tax amount that you are using i.e. Field BSEG-QBSHB is designed to fill for the classic withholding tax. And extended withholding tax information is stored exclusive in table WITH_ITEM.
Also note that MIRO does not give the user the control in case of Classical withholding tax. It only supports Extended withholding tax. Hence it does not populate BSEG fields in case of Extended WT.
So in MIRO, the data for extended withholding tax are saved within the table WITH_ITEM and not within the table entry BSEG-QBSHB. The latter isnot updated during the procedure. Furthermore it is not possible to select data from table WITH_ITEM
within the transaction FBL1N in a transparent and unique way, as FBL1N only reads BSEG / BSIK / BSAK tables.
In your line layout,you define a field BSEG-QBSHB. But actually the field of vendor/customer line item is filled with zero from FI. Thus,it shows zero in line item display*
Please review note 363309 for detailed explanation and explains the functionality which is valid even for your release.
So it is not possible to display withholding tax information in the line item display transactions, since this information is not
held in the BSEG / BSIK / BSAK tables, but is instead stored in the WITH_ITEM table.
Please convey to your client, standard SAP will not show the TDS information in line item reports, documents posted from MIRO and refer the note 363309.

Item's withholding tax amount is not zero

Dear All,
When ever we clear the vendor account through f.13 system was showing the below mentioned message.
S No customer documents selected
S No G/L account documents selected
I Only accounts with debit and credit postings are included
X Item's withholding tax amount is not zero 0101 K 319936 13000031 105352237 1
X Item's withholding tax amount is not zero 0101 K 319936 13000031 105352237 2
I Stop date " 02.01.2010 Stop time " 17:00:00
Client is asking no need to show Items withholding tax amount is not zero message.
Where as the clearing criteria is business place .
Regards,
Teja

Hi,
please refer to the note 499902 and 442588 for the explanation why the transaction F.13 has given out
this error and which transactions (FBZ2 or F-53) should be used to clear the items with the withholding tax info maintained.
Reg
Madhu M

Payment category withholding tax list is not showing in ap invoice

Hi Experts,
Payment category withholding tax list is not showing in A/P invoice. If it is invoice category code's are showing.
I'm using 8.8 PL 12. In BP the tax code check box is enable only.
Regards,
Sudhir B.

Hi,
Please refer to following link:
[How to Guide|https://websmp106.sap-ag.de/smb/sbo/howtoguides]
Check Note No. : 1367045 as well.
The withholding tax code in "Payment Type" is blocked in A/P down payment requests, A/P down payment invoices, and A/P invoices.
It is available only for AR side.
Kind Regards,
Jitin
SAP Business One Forum Team

Withholding tax amount is not updated in with_item table

Dear all,
In our system, one vendor invoice posted through FB60. In which, system generates withholding tax lin item. The same line item shows in BSIS and WITH_ITEM tables. It also shows in GL account line item display as open item. But, in WITH_ITEM table system not calcuate tax amount and shows as nil withholding tax amount against withholding tax base amount because of this I will get error at the time of creating challan through J1INCHLN.
Please help us though there is statutatory payment due date.
Regards,
Kalpik

Hi Raghvendra,
Thanks for reply. Why system is not update withholding tax amount only for that particular document ?
So, we can take precaution in future also.
Regards,
Kalpik

In Withholding Tax, Amount is not appearing in Remittance Challan

Hi,
I have done WHT configuration in Implementation project, This is my 1st Project and I am new in SAP, I am facing following 2 Problems
1) Remittance Challan is getting prepared.but amount is not showing in the remittance challan, all the process till Certificate is happening smoothly. Please advice, where my settings went wrong or If I missed something in the configuration?
2) Please also guide or tell me the steps for configuring E-TDS filing.
Again requesting to kindly provide the solution.
Thanks
Regards
Sunil

Your Qn. No.1 is answered in the following thread.
Re: WHT Error while J1INCHLN ?

Withholding tax amount display in vendor master data

Hi All,
When i executining the Vendor line item Display (FBL1N), i want to see the Withholding tax amount, withholding tax base amount. I changed the layout for display, i can't able to see withholding tax amount for Doc type RE.
Thanks & Regards
SUNITHA.P

HI
try this... define screen layout per activity (Vendors)... there in company code data u have to make wht code details as req entry... path SPRO>IMG>Financial accounting>ARAP>Vendor accounts>Master data>define screen layout per activity (Vendors)
hope this helps u
if it helps u pls give points

Error M8-688 - Creation of several vendor line items is not possible for document type RN.

Hello All,
We are using the Net Invoice Posting with document type RN(Invoice- Net). We are generating different vendor line items in the accounting document based on the withholding tax codes involved in the invoice posting. When it comes to net invoice posting system is giving an error message M8-688 - Creation of vendor line items is not possible for document type RN. Is there is any way to create multiple vendor items with net invoice posting? Please suggest.
Thanks,
Chandu.

I dont think that there is any way because it is a hardcoded error message.
      IF NOT t003-xnetb IS INITIAL.
        MESSAGE e688 WITH pi_rbkpv-blart.
      ENDIF.
SAP is checking the customizing for net/gross posting per document type in table T003
And if it is set up as net, then it is a hard error.

Report for wage type with number, amount and amount per unit?

Hi friends.
I would like to know if there exits a report for wage type (like the PC00_M99_CWTR) that shows the number (anzhl), amount per unit (betpe) and the amount (betrg) of a person for a specific wage type.
The standar report PC00_M99_CWTR does not display the amount per unit (betpe).
Thanks in advance.
Albio.-
Edited by: Albio Manuel Vivas on Oct 20, 2011 6:13 PM

Thanks,
could you tell me what transaction i'll should use?
thanks in advance
Albio.-

REPORT FOR INFO TYPE 586

Hi All
I am trying to create a report for INFO TYPE 586 in HR ABAP,where in a table apporx 30 investment codes , proposed investment and actual amount are apperaring .
Now My problem is, I do not want to use IF .... ENDIF statment. Is there any other way to write the code .
Please Help.
Thanks in advance.

Hi,
In this situation you can use field-symbols and/or a internal table. Like this:
tables: pa0586.
field-symbols: <ff1> type any,
               <ff2> type any,
               <ff3> type any.
data: w_campo1(30),
      w_campo2(30),
      w_campo3(30),
data: w_nx(2) type n.
data: begin of i_myitc occurs,
        itc like pa0586-itc01,
        dsc(30),
      end of i_myitc.
* fixed selection or may be from a z table
i_myitc-itc = '01'. i_myitc-dsc = 'AAAAA'. append i_myitc.
i_myitc-itc = '02'. i_myitc-dsc = 'BBBBB'. append i_myitc.
i_myitc-itc = '03'. i_myitc-dsc = 'CCCCC'. append i_myitc.
select single * from pa0586.
do 30 times.
   w_nx = sy-index.
   concatenate 'PA0586-ITC' w_nx into w_campo1.
   concatenate 'PA0586-PIN' w_nx into w_campo2.
   concatenate 'PA0586-AIN' w_nx into w_campo3.
   assign (w_campo1) to <ff1>.
   assign (w_campo2) to <ff2>.
   assign (w_campo3) to <ff3>.
   read table i_myitc with key itc = <ff1>.
   write: / <ff1>, <ff2>, <ff3>, i_myitc-dsc.
enddo.
Best regards,
Leandro Mengue

How to change number range for document type ?

Dear All
Experts
How to change the number range for document types for entry view? I am trying to change the number range for all document type as per defined ranges in FBN1, but at the time of saving document type and number range the system is throwing error message as
Doc. type C1: Number range 07 is used for ledger L6 with doc. type AE
Message no. FAGL_LEDGER_CUST093
I have defined a leading ledger in system too with these settings
1)     Define ledger for accounting.
2)     Defining currencies for it.
3)     Defining ledger group for the same.
4)     Defining accounting principles
5)     Assignment of principles to leading ledger.
Are there any extra settings required for leading ledger settings?
I have some doubts those are :-
How document types defined at ledger level?
How to define them at leading ledger level? (Like my case)
Focus on this will be appreciable.
Regards,
Sharvari Joshi.

hi ,
The document numbers in the leading ledger and the non leading ledgers should be in sync, they should not have any differences, so incase you are trying to change the number range for C1, the number range 07 is already been assigned to doc type AE. i guess you have cant use 07 for C1. may be you can try out with an other number range. check this and let me know if you are able to do this.
coming to
1.How document types defined at ledger level?
2.How to define them at leading ledger level? (Like my case)
Ans 1. please try defining document types for entry view in a ledger.
path : SPRO- financial accounting new -financial accounting global settings new - document -document types -define document types for entry view in ledger.
upon prompt enter the ledger and go ahead creating the number ranges for the document types.
Hope this helps.
Regards
amrutha

Withholding tax amount in fbl1n report

hi,
In FBL1N report When the posting is coming from FB60 or manual invoice, the withholding tax amount will appear in the column but when the posting came from MIRO, withholding tax amount figures appear as zero values even there is a posting in the withholding tax account.

Hi,
Refer
SAP Note 363309 - Extended withholding tax with line item display.
Thanks
Aravind

Automatic PO for document type

Hi..
i have a requirement where i need to generate automatic PO from PR for a unique document type.
I have created PR document type ZNB from NB, and also PO document type ZNB from standard doc type NB..
i am able to create automatic PO from PR for PR doc type ZNB to PO document type ZNB BY ME59
but when i have PR for document typeNB am not able to create automatic PO.
is there any settings where i can specify that for PR document ZNB only PO for document type ZNB will be created.

YOU JUST NEED TO GO TO TCODE OLME>PO>DEFINE DOCUMENT TYPE >SELCT YOUR DOCUMENT TYPE AND CLIK ON THE FOLDER LINK WITH DOCUMENTS
here u ca maintian the zb pr as u r source document thenm only with refrence to this document type u will be able to create the po
do the above activity for pr also
in pr document type maintain the target document type as znb (po)

In fbl1n report for document type RE withholding tax amount is not showing

Similar Messages

Maybe you are looking for