In FCPx how do you invert the phase of one channel of audio?

I talked with my engineer friend and he listened to and tested the audio on my project. He said one of the channels was out of phase and that is why I'm getting no audio on my wireless audio recording being played back on android phones. He didn't know how to tell me to access fcpx to make the change to the one channels phase. Any help is greatly appreciated!
p.s. I want to thank Luis Wequeira and Tom Wolsky for getting me to this point.

IF the problem is inverse phase, all you need to do is switch either the left or right, which will put whichever one you switch back in phase with the other one.
HOWEVER, as a test, if you hit the "Make Mono" button in the Gain effect BEFORE switching the phase of either channel, it will combine the two channels. If they completely cancel out during playback, phase was your problem with the phones. If it doesn't cancel out though, your problem isn't phase. Again, I doubt a complete lack of audio is due to phase issues, but test it out.
On a more technical level, neither channel is actually out of phase when people talk about two channels being 180 degrees out of phase. One of the channel's polarity is reversed, meaning the voltage, bits, or whatever, is increasing when it should be decreasing and decreasing when it should be increasing. The audio channel is doing the mirror image of what it's supposed to be doing. Being out of phase actually refers to one of the channels being moved in time in relation to the other channel, which is a different thing entirely.

Similar Messages

How can you move the objects from one server to another?

how can you move the objects from one server to another?

Hi,
Collecting objects for Transporting
1. rsa1->transport connection
2. left panel choose 'object type', middle panel choose 'infocube' and 'select objects'
3. then choose your infocube and 'transfer'
4. will go to right panel, choose collection mode 'manual' and grouping only 'necessary objects'
5. after objects collection finished, create request
6. If they are $TMP, then change the package.
7. When you click the Save on the change package, it will prompt for transport. Here you can provide an existing open transport request number, or if you like here itself you can create a new one.
8. You can check the request in SE09 to confirm.
Releasing Transport Request
Lets say you are transporting from BWD to BWQ
Step 1: In BWD go to TCode SE10
Step 2: Find the request and release it (Truck Icon or option can be found by right click on request #)
Note: First release the child request and then the parent request
Steps below are to import transport (generally done by basis )
Step 1: In BWQ go to Tcode STMS
Step 2: Click on Import queue button
Step 3: Double Click on the line which says BWQ (or the system into which transport has to be imported)
Step 4: Click on refresh button
Step 5: High light the trasnport request and import it (using the truck icon)
Transport
http://help.sap.com/saphelp_nw2004s/helpdata/en/b5/1d733b73a8f706e10000000a11402f/frameset.htm
http://help.sap.com/saphelp_nw70/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps.
thanks,
JituK

How do you get the percentage of one number compared to the sum of the total in an array in ipad numbers

How do you get the percentage of one number compared to the sum of the total in an array in ipad numbers

On the iPad my example looks like this:
To fill the formula down you tap cell and then Fill:
And drag the bottom part of the yellow rectangle down:
Wayne's example would look similar.
SG

TS2755 Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones a

Is there a fix to deleting already deleted address book contact, from messages search? i.e. when you type in say letter c in messages search, all contact with a c, past already deleted and current all appear? How do you make the old deleted ones appear?

only way is to restore the phone as new. OR wait until IOS 7 comes out in the fall.

How do you extend the frame from one side but not the whole thing?

I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?

In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
Mark

How do you make the background all one color without disturbing the subjects?

I shot a wedding this past weekend. Where the bridal party walked in there was an acrhway with christmas lights as the only lights. It made the background all splotchy. I have tried the paintbrush tool, but only preset choices, such a textures and such. Won't help. I need to work around people and make the background all one color. I've tried using a vignette, but it made it too dark, and when you lighten the exposure you see all the splotches. Does anyone have any advice. I am in a jam, I want the colors to be uniform for all the bridal party....and not look like someone threw paint on the wall. HELP PLEASE!
I'm using Adobe Photoshop Elements 10.

You'll need to post an example so we can figure out the best way.
Ken

How do you move the iphone from one computer to another.

I am having a lot of trouble with a computer so I started using a different one. I have never had an iphone on this computer. When I hook up the phone and try to put anything on it, like a ringtone, it says that the phone is using another iTunes and it wants to erase all the content of the phone. I searched the internet and it says to just move it and all will be good. This I have found is not true!!

You need to transfer your iTunes library from your old computer to the new or different computer per the instructions included with this link. Transferring your iTunes library from your old computer to the new or different computer you will be be using now to sync your iPhone with per the instructions included with this link (along with authorizing the new or different computer with your iTunes account with iTunes) will prevent any iTunes content on your iPhone that was transferred from your old computer from being erased from your iPhone with the first sync with iTunes on the new or different computer.
http://support.apple.com/kb/HT1751

Game created in Flash(SWF) how do you determine the end on one Captivate slide so you can proceed?

I know this discussion title is long, but here's the background...
We've created a game in Flash which created a SWF file and imported that SWF file into Captivate 5.5 as an animation.
Because it's a game, it can take someone 1 minute or 10 minutes to complete it.
I would like the slide to end when the individual playing the game ends (the SWF animation) and then move onto the next slide.
I've tried several different settings but nothing works.
Please advise.
Thank you,
Dave

I am no expert, and there may be better soltuions but as I see it there are two options:
1. Easy solution - Add a button in captivate to allow the user to manually navigate to the next slide (the button can be present the whole time allowing the user to nominate when they want to proceed)
2. More difficult solution: Turn the flash file into a widget. At the end of the game get the widget to set the variable rdcmndResume to 1
More information on creating widgets (and a framework for creating widgets more easily): http://www.infosemantics.com.au/widgetking/blog-2/

How do you split the print job across multiple printers to shorten the prin

i
Can any one you provide some information on below questions.
Check printing by XML template (XML Publisher).
1. When printing checks, how do you print the checks from one printer tray and the overflow remittance pages from another printer tray?
2. When printing a large batch of checks using XML and PDF output, how do you split the print job across multiple printers to shorten the print time?
I appreciate if you could give some information on above 2 questions.
Regards,
Ramarao.

Probably sould just do them individually.
How to get all the iWork apps, iPhoto, and iMovie for free on an eligible iPhone or iPad
http://www.imore.com/how-get-all-iwork-apps-iphoto-and-imovie-free-eligible-ipho ne-or-ipad
About Free Apple Apps for iOS 7 compatible devices
http://support.apple.com/kb/HT5913
 Cheers, Tom

How do you change the key of a Logic Pro X loop?

Hi everyone,
I am working on a song in Logic Pro X using one of the loops and I just wanted to know how to change the key of the loop to fit in with the key of the song? The key of my song is C Major while the Loop is in G Major.
Any tips would be gratefully received.
Many thanks.

Jamiesroom wrote:
How do you change the key of one specific loop using the Key/Transpose in the Inspector? Step by step instructions would be great.
Many thanks.
Here is the step-by-step instruction:
Step 1: Select the MIDI Region and set the Transpose value in the Region Inspector to the left.
Step 2: There is no Step 2
If you are a newbie, then I would recommend to have a look at my Graphically Enhanced Manual "Logic Pro X - How it Works" where I explain everything in great details with lots of easy to understand diagrams and screenshots, including a separate chapter about Apple Loops.
BTW: If you have a proper Apple Loop, then it should automatically adopt to the key of your Project. A transpose is not necessary, unless you want to overwrite a phrase to a specific key.
Hope that helps
Edgar Rothermich
http://DingDingMusic.com/Manuals/
'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

How do you change the text color in io7 from white to black?

How do you change the text color on the home page in iO7 from white to black? I tried to invert the color but that reverses everything inclufing pictures.

Yes, you can. If you change your wallpaper to a very light or white color the text turns black.

How to programmatically Identify the Phase from a managed bean

How can we identify the Phase from a normal managed bean method ?
This managed bean method is a method activity in a task-flow. How can we identify the phase..?
If there is an event then, we can identify the phase using event.getPhaseId() but here there is no event. Can I get the phase programmatically ?
Thanks

Hi,
You won't need that with a PhaseListener. You could use something like the following:
public class CurrentPhaseListener implements PhaseListener
    private static ThreadLocal<PhaseId> currentPhaseId = new ThreadLocal<PhaseId>();
    public static PhaseId getCurrentPhaseId()
        return currentPhaseId.get();
    public void afterPhase(PhaseEvent ev)
        currentPhaseId.remove();
    public void beforePhase(PhaseEvent ev)
        currentPhaseId.set(ev.getPhaseId());
    public PhaseId getPhaseId()
        return PhaseId.ANY_PHASE;
}Regards,
~ Simon

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

Why don't you ask this question on the iDVD forum?

How do you smooth the edges of an image

Hi,
How do you smooth the edges of an image, like the question mark edges?
Regards Peter

You could duplicate the image (Ctrl+J)
Then apply some blur (Filter >> Blur >>Gaussian Blur)
That will blur the whole image so apply a layer mask and invert (press Ctrl+I)
Set foreground color chip to white and select the brush and choose a very small diameter. Then brush gently over the edges to reveal the blur.
You can switch the color chip to black to undo a mistake then back to white to continue.
Alternatively simply select the blur tool from the tools pallet (keep pressing the R key to tab tool choices) and blur the edges as wanted. It’s a little more crude but will probably do the job.

In FCPx how do you invert the phase of one channel of audio?

Similar Messages

Maybe you are looking for