In Final Cut Pro x, Somehow my video got muted and I can't find a way to UNMUTE it! (it won't let me manually lift up or down the waveform - nor go in and raise the level of loudness) Any suggestions? (How to unmute)
In Final Cut Pro x, Somehow my video got muted and I can't find a way to UNMUTE it!
(it won't let me manually lift up or down the waveform - nor go in and raise the level of loudness)
Any suggestions? (How to unmute)
Do you know how to use the volume adjustment line?
If so, is it not working?
Can you post a screenshot of your audio?
Similar Messages
-
My iPhone 5s (16GB) is stuck with 3948 photos (shown on the iTunes storage bar) on and I can not find a way to delete them all! It's very annoying as it takes up 6.54 GB of space and leaves me no room to add films, music...etc on to it. Please help me!!! I have already tried the numerous articles Apple have sent my way and I am still having no luck.I'd be eternally grateful if anyone could find a solution for me as this has been a problem for almost a year. Thank you.
If they were put there via iTunes sync process, then simply untick the Music box before syncing again.
-
I have a fairly capable MacBook Pro (2.93 GHzIntel Core 2 Duo processor, 4GB 1067 MHz DDR3 memory and a 1TB HD -5400 rpm, so I am hoping it's not that my computer that can't support it and it's something more simple like not have ProApps QuickTime codecs installed. Thanks in advance!
How can I check to see if my version of QuickTime Pro 7.6.6 already has ProApps QuickTime Codecs installed? I also have Final Cut Pro 6. I'm asking because my computer can't seem to play ProRes 422 codec video without stuttering or skipping?
If you can view a ProRes 4-2-2 video at all, then you either have the independent ProRes422 Playback component installed or the FCP "Pro" video components installed.
I have a fairly capable MacBook Pro (2.93 GHzIntel Core 2 Duo processor, 4GB 1067 MHz DDR3 memory and a 1TB HD -5400 rpm, so I am hoping it's not that my computer that can't support it and it's something more simple like not have ProApps QuickTime codecs installed.
Check your "~/Library/QuickTime" folder for your various "Pro" components. If in doubt that you have them all, re-run the FCP installer and it should add any missing components, apps, or utilities. -
I have bookmarks and notes that are no longer attached to the original page and I can't find a way to delete them. Could someone help me purge these things so they are not in the way?
James Ward4 Thanks for your suggestion. I have tried the video app and it appears to have some, but not all of the downloads which are viewable without wifi, so I will now review the download process and see if I can capture the missing episodes. Thanks again.
-
How can I open more than one tab in Firefox Home on an iphone 4 with ios 4.3.1? I can access the tabs page but all the entries are blank and I can't find a way to open a new page in a new tab.
That doesn't fix the problem which seems to be more of a bug, but that's a great solution. In fact I think I like that more than right clicking. Thanks.
-
The Calendar icon has disappeared from my dock and I can't find a way to restore it or to download the Calendar app. The iCal app is not in my applications folder. Help please.
Do you have Time Machine enabled. If so, go back through your previous months until it features in your Application folder. Then restore.
-
My "Back" arrow disappeared from my Firefox toolbar and I can't find a way to go back to a previous page. How can I get it back on?
Hey kayo410,
Sounds like they might have accidentally been removed from the toolbar. The toolbar can be customized pretty extensively, so it's not an uncommon mistake. Take a look at the Knowledge Base article [[Back and forward or other toolbar items are missing]]. It will show you how to restore the buttons.
Hopefully this helps! -
My imovie is frozen and i can't find a way to make it work.
My i Movie is frozen and i can not find a way to make it work, HELP!!!
Hi,
Please use the following tips/instructions to fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02221706&cc=us&lc=en&dlc=en
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
Does Final Cut Pro X support all video files as did its prior version Final Cut Pro Studio?
Hi,
Use to have a Mac Pro and had Fina Cut Pro Studio. Now I have just got a new Macbook Pro (Lion), and have just purchased the new Final Cut Pro X from the App store. I am having problems importing 3gps files into FCP X. I never had a problem with the $1000 version of studio. Does the new FCP X have limitations on what video files are compatible with it? do I need to purchase additional plug-ins etc???
Ta
ZebReally depends on the specific file type you want to work with. FCP X does not support every single flavor of video FCP 7 did, so it's not a huge surprise if the file you're using is not supported. That said, there's plenty of free third party tools you could use to convert it to a regular QuickTime ProRes file that FCP X would accept. For example- http://www.squared5.com/ would most likely be able to load it. Try and let us know. And if that doesn't work please provide more details about the 3gps file you're using.
-
Final Cut Pro X long form videos
I've done a number of short videos on Final Cut Pro X using my Macbook Pro.Now a client wants me to send out 90minute seminars with a "watermark" logo. First one seems is very slow going. Do i need something like a Mac Pro with dual processors, etc.?
letstawk wrote:
i have a macbook pro running os 10.7.5, Processor 2.66GHzIntel Core i7, Memory 8GB 1067MHzDDR3, graphics NVIDIA GeForece GT 330M 512 MB
This seems to be just like my mac - a 2010 model. Unfortunately, it does not support 16GB, you have already maxed out the RAM. You can and should avoid running other RAM-hungry applications (especially browsers) while you are editing or exporting in FCP X. Also, keep Activity Monitor open and look out for the memory section. If free RAM (in green) dwindles to a few tens of MB, your mac will slow down considerably. In that case, quit any applications you can, and quit and restart FCP X to free as much RAM as possible.
Using a fast external disk will also help. The internal drive is not adequate for such large projects and also may be filling up, which again will slow things down a lot.
(For this model the options are not many: FW800 (faster) or USB2 (not as fast); the best choice for me was an e-Sata disk, but that is only possible on the 17" model, via an express card - not an option if you have the 15" MBP)
So use RAM very wisely, and put your stuff in an as fast as possible external drive and you should be ok.
Not nearly as fast as on a Retina MBP, of course, but usable. -
Final Cut Pro X is exporting video with horizontal lines?
I filmed a show with 2 different cameras (one is a canon vixia, the other is a canon dos 7D, i realize the quality is different for them) and I used the multi cam editor to match h up the clips and audio file to switch back and forth. I think i created proxy media to use for the multi cam clip. Whenever i export my movie, the movie plays with horizontal lines, and whenever there is faster motion, the person gets blurred. What is making final cut pro x export like this? How do I fix this? I've tried exporting with Apple ProRes 422, Apple ProRes 422 (Proxy), and H.264, but all video files have the lines going through it and the motion is a bit blurry. Please help me!!
There are quite a few Vixia models from Canon; which is yours?
Without looking at the image, it's not certain, but your description sounds like interlaced footage displayed on a computer. The 7D only shoots progressive, so it's possible your other cam was set to record interlaced. If your first clip placed on the timeline was an interlaced clip, FCP would automatically set the project to interlaced.
In a addition to your model #, what would be useful is to select one of the Vixia clips in the browser and then to take a screen shot of the top part of the Info pane.
Russ -
Final Cut Pro 4: Problems exporting video using QuickTime conversion
just recently updated my Mac to version 10.4.11 -
Ever since, Final Cut Pro won't let me Export my video using QuickTime Conversion.
Its starts exporting, then freezes at 79%. A general error message pops up.
I know its not a space issue, because I have 20GB left and the video i'm exporting is only 2 GB.
I installed all the software updates.
Can anyone help? Do I need a new version of Final Cut?1) this is the final cut express forum not the pro.
2) 10.4.6 is not the latest, try updating to 10.4.11
3) after any system update you must run disk utility to repair permissions or errors that may not have been addressed during the upgrade process.
4) have you tried exporting as a reference movie then playing it in qtpro, if ok then export.
5) what are you trying to export too? -
Does Final Cut Pro import 24 fps video?
Hi,
I've been working with Final Cut Express for about a year, and am thinking about upgrading. I know that Final Cut Express does not import true 24 fps video, but am wondering if Final Cut Pro does. Also, does Final Cut Pro require more hardware power than FCE? (I currently have a dual core MacBook Pro with 4 gigs of ram. Will that suffice for FCP?)
Thanks,
VicYes, FCP can handle 24 (or, more commonly, 23.98), and no, it doesn't require additional hardware (though certain apps inside the suite will certainly benefit from it).
-
Scanner won't work on my Hp printer and I can't find a way to view my ink level
Hello! I uninstalled HP Support Assistant, did a Windows update, installed from official site, and yet I still cannot scan from my printer (had to make a shortcut to scan from my computer), and I can't find out my ink level.
Any ideas on how I can view my ink level?
Any ideas on how I can scan (although that's low priority because I did that work around)
I have been going back and forth to HP site and HPSA (making sure everything is updated) but I did see that HP Digital Imaging Monitor icon is msising and HPSA advised me to to a custom install and to include that when installing. That's the icon/program to view my ink levels. But I can't seem to make that happen. Not an option for installation.
Any more ideas?
Thanks!
Pavilion dv6=7135nr entertainment PC. Windows 7.
This question was solved.
View Solution.Hi linsjean,
I see you have lost the ability to use the HP software to scan and check ink levels. You could continue scanning as you are now and simply download and install the HP Print and Scan Doctor to check your ink levels, or you could perform a comprehensive uninstall and reinstall.
Click here to download and run the utility > HP Print and Scan Doctor
Or you can use the steps below to complete the uninstall and reinstall;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Download the software and choose to save as, save to desktop > Click here, choose your operating system, click next, select the Driver Product installation Softwar...
After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
If you can not complete any of these steps, please stop and post back to let me know where you got stuck. Skipping a step and continuing to the next step will not accomplish what we need to. If you get stuck I will help you through it.
If this does resolve the issue, please let me know. Thank you. Fingers crossed!
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP -
When I click on "save" the resulting dialogue box fills the entire screen. I'm unable to reduce its size by using the mouse to pull in the borders of the dialogue box, and I can't find any other way to reduce it. This problem appeared spontaneously. It didn't start immediately after installing a new plug-in or a new Firefox release -- it just happened one day. I've used Firefox for years and never had this very inconvenient problem before.
Is it the dialog that appears for Save Page As? Like other windows, it could be maximized/restored by double-clicking the title bar. Does that make any difference?
If not, it might be necessary to rename or delete the localstore.rdf file, which stores window positions and related settings...
Maybe you are looking for
-
Nothing to add.
-
Web.show_document in calling parameter form of a report(solved)
Hi, Can you please write which is the syntax of calling a report in Dev10g which has a parameter form.....???? something like ....but i don't know how exactly.... param_form_var:='yes'; URL_VAR:='/reports/rwservlet?server='||rep_server_name_var||'&re
-
How to create Characteristic group in CO-PA for assessment purpose
Hi, Can anybody guide me as how to create Characteristic group in CO-PA for assessment of cost center balance to CO-PA? Thanks, Bijay
-
How to delete entries in table HRP1000
Hi, I have lots of expired entries in HRP1000 in SRM system. (Around 26 million) Do you know how/which report help me to delete the expired data? I guess the below options: 1. use report to delete them in SRM directly? or 2. use report to delete the
-
FileChooser for remote files: need help!!!
I need a Remote file chooser which lets me see the files in the remote machine. Please let me know if you guys have any idea abt how to do it. Appreciate ur help, yulduz