In.ftpd configuration problem on Solaris 10

I am having a problem when I managed to configure in.ftpd with -d option on Solaris 10. I have no idea where I can put this option on.
Apparently, it has been removed from /etc/inetd.conf. I am just wondering why Solaris 10 would do such change against most of previous versions.
Any idea?
Jeff

Fixed by using inetadm.
jeff

Similar Messages

Metainit/striping problem on Solaris 9

We are trying to deploy the Apple XServe RAIDS to customers running Solaris 9. The issue is that Solaris 9 will not recognize a device/LUN that is > 2TB. (No problem with Solaris 10) In trying to solve this problem, we sliced a 7 disk (4.09 TB) RAID into 3 slices. This presents three 1.36TB disks to the Solaris system. Basically, we have 6 disks being presented across both controllers to Solaris. They are direct connected from the XServe to a dual port QLogic HBA. The problem comes in when you try to create a stripe/concatenation across the logical devices being presented. (The disks are being presented on C4 and C5)
Results from a format AFTER I split both 7 disk RAID5s into 3 slices.
AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@0,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@1c,600000/scsi@2/sd@1,0
2. c1t2d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@2,0
3. c1t3d0 <SEAGATE-ST373307LSUN72G-0507 cyl 14087 alt 2 hd 24 sec 424>
/pci@1c,600000/scsi@2/sd@3,0
4. c4t600039300001F461d0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,0
5. c4t600039300001F461d1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,1
6. c4t600039300001F461d2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3/fp@0,0/ssd@w600039300001f461,2
7. c5t600039300001F2ECd0 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,0
8. c5t600039300001F2ECd1 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,1
9. c5t600039300001F2ECd2 <APPLE Xserve RAID 1.51 aea84000>
/pci@1e,600000/SUNW,qlc@3,1/fp@0,0/ssd@w600039300001f2ec,2
Specify disk (enter its number):
Results of the cfgadm command. You will see there three logical devices presented to each controller. Six disks.
cfgadm -al -o showFCPdev
Ap_Id Type Receptacle Occupant Condition
c4 fc-private connected configured unknown
c4::600039300001f461,0 disk connected configured unknown
c4::600039300001f461,1 disk connected configured unknown
c4::600039300001f461,2 disk connected configured unknown
c5 fc-private connected configured unknown
c5::600039300001f2ec,0 disk connected configured unknown
c5::600039300001f2ec,1 disk connected configured unknown
c5::600039300001f2ec,2 disk connected configured unknown
Trying to initialize a 6 device stripe via Solaris Volume Manager (AKA disksuite)
metainit -f d77 6 1 c4t600039300001F461d0s0 1 c4t600039300001F461d1s0 1 c4t600039300001F461d2s0 1 c5t600039300001F2ECd0s0 1 c5t600039300001F2ECd1s0 1 c5t600039300001F2ECd2s0
I receive the following error:
metainit: hostname: c4t600039300001F461d1s0: overlaps with device in d77
I tried to do a work around where I create three striped devices then concatenate them:
Creating the first 2 device stripe across controllers c4 and c5 (1 device each)
metainit -f d77 2 1 c4t600039300001F461d0s0 1 c5t600039300001F2ECd0s0
I was able to create the first metadevice d77 using one logical LUN from each controller.
When I tried to create a second metadevice across the controllers: (Using d1 from each controller)
metainit -f d78 2 1 c4t600039300001F461d1s0 1 c5t600039300001F2ECd1s0
metainit: hostneme: c4t600039300001F461d1s0: overlaps with device in d77
I received the same error.
In doing some reaearch, it seems the problem is due to a problem with the disk duplication process, disk device IDs stored on the disks are not unique. I was curious if this is the problem that Apple presents the split disks with the SAME diskid? Has anybody else successfully created stripes (due to a LUN size limit) across the disk successfully on a Solaris system?

I contacted Sun and here is an explination from them. I also noticed when I queried the Xserver RAIDS, there were no serial numbers.
Solaris 9 can support a 16Tb filesystem, but there is a scsi limitation on the device of 2Tb. So you are stuck with striping together several smaller devices if you want a single filesystem above 2Tb.
The problem you are having when metainit reports an overlap comes from the way Solaris Volume Manager identifies devices. The portion of the scsi inquiry that is returned is always unique when Sun firmware is involved, but in your case is not unique.
You may be able to make use of the appended infodoc to avoid this problem. I see no evidence of our having tested this with your particular scenario, but it has been successful in similar cases.
You might also inquire of whoever supports your storage device whether a mode is supported whereby the device's inquiry strings can be made unique.
Here is the steps he wanted me to take and the results. I still can not get the Xserve RAIDS to generate a unique device id:
Step 1
Determine the vendor and product strings. You can run these commands:
# netstat -k | grep -i vendor
# netstat -k | grep -i product
netstat -k | grep -i vendor
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
Soft Errors 2 Hard Errors 0 Transport Errors 0 Vendor APPLE
grep -i product
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
Product Xserve RAID Revision Revision 1.51 Serial No Size 1500294152192 Media Error 0 Device Not Ready 0
or you can run
# format -e
then select scsi, then inquiry.
scsi> inq
Inquiry:
00 00 05 12 5b 00 00 02 41 50 50 4c 45 20 20 20 ....[...APPLE
58 73 65 72 76 65 20 52 41 49 44 20 20 20 20 20 Xserve RAID
31 2e 35 31 63 00 00 00 00 00 00 00 00 00 00 00 1.51c...........
00 00 00 00 00 00 00 00 00 00 0d 40 0d a0 0e 20 ...........@...
0d 80 09 00 0a 00 00 20 00 00 00 20 20 20 20 20 ....... ...
20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
Vendor: APPLE
Product: Xserve RAID
Revision: 1.51
Removable media: no
Device type: 0
ISO version: 0
ECMA version: 0
ANSI version: 5
Async event notification: no
Terminate i/o process msg: no
Response data format: 2
Additional length: 91
Relative addressing: no
32 bit transfers: no
16 bit transfers: no
Synchronous transfers: no
Linked commands: no
Command queueing: yes
Soft reset option: no
Step 2
Add an entry in the file '/kernel/drv/sd.conf'.
sd-config-list=
"APPLE Xserve RAID ", "AppleRAID";
AppleRAID=1,0x8,0,0,0,0,0;
Step 3 Reboot.
Step 4 Check with SUNWexplo.
[email protected]:[/opt/SUNWexplo/bin] (8)# ./diskinfo.sparc
/dev/rdsk/c0t0d0s2: Device busy
AVAILABLE SCSI DEVICES:
Location Vendor Product Rev Serial #
c1t0d0 COMPAQ BD036863AC HPB5 B2FT4HMM
c1t1d0 SEAGATE ST336607LSUN36G 0507 0349A66VKQ
c1t2d0 SEAGATE ST373307LSUN72G 0507 0417B7C9ZC
c1t3d0 SEAGATE ST373307LSUN72G 0507 0425B7LV5Q
c4t600039300001F461d0 APPLE Xserve RAID 151 c
c4t600039300001F461d1 APPLE Xserve RAID 151 c
c4t600039300001F461d2 APPLE Xserve RAID 151 c
c5t600039300001F2ECd0 APPLE Xserve RAID 151 c
c5t600039300001F2ECd1 APPLE Xserve RAID 151 c
As you will notice, there are no serial numbers in this command or netstat -k | grep -i product commands.

PDF font problem on Solaris (Reports9i)

Hi.
We are recently moving our application from 9ias Release 1 to 9ias Relese 2. After several configuration problems I was managet to get most of it to running, but encountered big problem with Reports. In Reports6i we used font aliasing, and included several modified fonts with AcrobatReader3. With AcrobatReader5 it's not posible because of more strict checking of PDF standard.
Then of course with Reports9i we start using PDF font subsetting. After added several ttf's (Arial, Courier New, Times New Roman) it started working fine with one exception. Report created with plain Courier New 10pts is not subsetted - in pdf i receive fixed-bold 12 pts.
It happening only with this one size of font. Courier New with size 10 pts and bold or italic looks good. When I change size to 9 or 11 pts - it's ok. I've checked if fonts existed in Xserver - they are.
I double checked uifont.ali - it's ok. I've temporarily solved the problem by changing font in builder on Windows from Courier New to Courier (same size), and then everything works ok. Of course it might be solving - but for the amount of work (about 200 reports) I'm looking for more 'normal' solution.
Any ideas?
Reports server working on Sun Sparc Solaris 5.8, 9ias Release 2 (Patch 2).
Builder works on WindowsXP, 9ids Release 2 (Patch2).
Czesiek.

Reports 6 or Reports 9? Note that Reports 6 does not generate
syntactically correct RTF for Unicode characters.
We've been running with a postprocessor to correct the RTF and
to change the Oracle-set font to Arial; I'll be watching to see if
there's a better way since our postprocessor shouldn't be needed.
-- allan

How to configure CUPS in Solaris 10 X86 and SPARC

Dears,
I need help in configuring CUPS for Solaris 10 X86 as well as on SPARC.
What i did?
Downloaded the CUPS 1.5.0
read the readme.txt
read the INSTALL.txt
Pre-req installation requires :-
CFLAGS= -i /some/directory \
CPPFLAGS = -i /some/directory \
CXXFLAGS = -I /some/directory \
DSOFLAGS = -L /some/directgry \
LDFLAGS = -L /some/directory \
./configure --
It errors out with
checking for gawk ... no
checking for mawk... no
checking for nawk ...nawk
chekcing for gcc ... no
checking for cc ... no
checking for cl.exe no
Configure error: no acceptable C compiler found in $PATH
see 'config.log' for more details
I installed all the missing dependencies from www.sunfreeware.com and I have the same problem.
I also tried to install the software packages from the operating system dvd... like for
ls -lrt gcc
gcc "SUNWgcc", "SUNWgccS", "SUNWgccruntime"
ls -lrt cc
cc "SUNWgccruntime", "SUNWlccom", "SUNWcctpx", "SUNWccisgn" , "SUNWccinv", "SUNWccfwctrl", " SUNWccfw", "SUNWccccrr", "SUNWccccr", "SUNWccccfg", "SUNWislcc",
"SUNWaccu", "SUNWaccr", "IPLTccons", " SUWgccs", "SUNWgcc", "SUNWmccom", "SUNWmcc", "SUNWusbccids", "SUNWusbccid"
ls -lrt gawk
no results
ls -lrt mawk
no results
ls -lrt cl.exe
no results
Is there any way should i follow apart from the above?
Rgds,
Mky

Check pkginfo -l for each package.
export the PATH variable where the packages are installed, like /usr/local/bin and etc.

Problems with Solaris 11 11/11

Hi,
I need your help because I have problems with Solaris 11 11/11 installed in a Dell Latitude E4310.
Here, there are the problems:
1- No it power off with shutdown or init 5 or init 0 only work well the reboot.
2- It can not connect to the wifi with wpa, no receive ip by dhcp, the driver of the card is "iwp"
Thanks.
Jorge
Edited by: jdangelo on Nov 16, 2011 1:49 PM
Edited by: jdangelo on Nov 17, 2011 2:51 PM

Here is the info of my laptop;
Manufacture name:Dell Inc.
Manufacture model:Latitude E4310
64 Bit:True
OS version:SunOS solaris 5.11 11.0 i86pc i386 i86pc
CPU Type:Intel(R) Core(TM) i5 CPU M 560 @ 2.67GHz
CPU Number:1
Number Of Cores Per Processor:2
Number Of Threads Per Processor:4
Bios/Firmware Maker:Dell Inc. Version:A05 Release Date:11/20/2010
prtconf -pv:
System Configuration: Oracle Corporation i86pc
Memory size: 3958 Megabytes
System Peripherals (PROM Nodes):
Node 0x000001
bios-boot-device: '80'
stdout: 00000000
name: 'i86pc'
Node 0x000002
existing: 00c21000.00000000.02bc6001.00000000
name: 'ramdisk'
Node 0x000003
acpi-namespace: '\_SB_.PCI0'
compatible: 'pciex_root_complex'
device_type: 'pciex'
reg: 00000000.00000000.00000000.00000000.00000000
#size-cells: 00000002
#address-cells: 00000003
name: 'pci'
Node 0x000004
reg: 00000000.00000000.00000000.00000000.00000000
compatible: 'pci8086,44.1028.410.2' + 'pci8086,44.1028.410' + 'pci1028,410' + 'pci8086,44.2' + 'pci8086,44' + 'pciclass,060000' + 'pciclass,0600'
model: 'Host bridge'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00060000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000044
name: 'pci1028,410'
Node 0x000005
acpi-namespace: '\_SB_.PCI0.VID_'
assigned-addresses: 83001010.00000000.f0000000.00000000.00400000.c3001018.00000000.e0000000.00000000.10000000.81001020.00000000.000060b0.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
reg: 00001000.00000000.00000000.00000000.00000000.03001010.00000000.00000000.00000000.00400000.43001018.00000000.00000000.00000000.10000000.01001020.00000000.00000000.00000000.00000008.a1001000.00000000.000003b0.00000000.0000000c.a1001000.00000000.000003c0.00000000.00000020.a2001000.00000000.000a0000.00000000.00020000
compatible: 'pci8086,46.1028.410.2' + 'pci8086,46.1028.410' + 'pci1028,410' + 'pci8086,46.2' + 'pci8086,46' + 'pciclass,030000' + 'pciclass,0300'
model: 'VGA compatible controller'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
device_type: 'display'
unit-address: '2'
class-code: 00030000
revision-id: 00000002
vendor-id: 00008086
device-id: 00000046
name: 'display'
Node 0x000006
acpi-namespace: '\_SB_.PCI0.GLAN'
assigned-addresses: 8200c810.00000000.f5400000.00000000.00020000.8200c814.00000000.f5480000.00000000.00001000.8100c818.00000000.00006040.00000000.00000020
reg: 0000c800.00000000.00000000.00000000.00000000.0200c810.00000000.00000000.00000000.00020000.0200c814.00000000.00000000.00000000.00001000.0100c818.00000000.00000000.00000000.00000020
compatible: 'pci8086,10ea.1028.410.5' + 'pci8086,10ea.1028.410' + 'pci1028,410' + 'pci8086,10ea.5' + 'pci8086,10ea' + 'pciclass,020000' + 'pciclass,0200'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '19'
class-code: 00020000
revision-id: 00000005
vendor-id: 00008086
device-id: 000010ea
name: 'pci1028,410'
Node 0x000007
acpi-namespace: '\_SB_.PCI0.EHC2'
assigned-addresses: 8200d010.00000000.f5470000.00000000.00000400
reg: 0000d000.00000000.00000000.00000000.00000000.0200d010.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b3c.1028.410.5' + 'pci8086,3b3c.1028.410' + 'pci1028,410' + 'pci8086,3b3c.5' + 'pci8086,3b3c' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1a'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b3c
name: 'pci1028,410'
Node 0x000008
acpi-namespace: '\_SB_.PCI0.HDEF'
assigned-addresses: 8300d810.00000000.f5460000.00000000.00004000
reg: 0000d800.00000000.00000000.00000000.00000000.0300d810.00000000.00000000.00000000.00004000
compatible: 'pciex8086,3b57.1028.410.5' + 'pciex8086,3b57.1028.410' + 'pciex8086,3b57.5' + 'pciex8086,3b57' + 'pciexclass,040300' + 'pciexclass,0403' + 'pci8086,3b57.1028.410.5' + 'pci8086,3b57.1028.410' + 'pci1028,410' + 'pci8086,3b57.5' + 'pci8086,3b57' + 'pciclass,040300' + 'pciclass,0403'
model: 'Mixed Mode device'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1b'
class-code: 00040300
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b57
name: 'pci1028,410'
Node 0x000009
acpi-namespace: '\_SB_.PCI0.RP01'
slot-names: 00000001.746f6c53.00003333
reg: 0000e000.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b42.5' + 'pciex8086,3b42' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b42.5' + 'pci8086,3b42' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00005000.81000000.00000000.00005000.00000000.00001000.82000000.00000000.f4000000.82000000.00000000.f4000000.00000000.01400000
bus-range: 00000001.00000001
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000000
devsel-speed: 00000000
interrupts: 00000001
unit-address: '1c'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b42
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b42'
Node 0x00000a
acpi-namespace: '\_SB_.PCI0.RP02'
slot-names: 00000001.746f6c53.00003433
reg: 0000e100.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b44.5' + 'pciex8086,3b44' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b44.5' + 'pci8086,3b44' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00004000.81000000.00000000.00004000.00000000.00001000.82000000.00000000.f2c00000.82000000.00000000.f2c00000.00000000.01400000
bus-range: 00000002.00000002
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000001
devsel-speed: 00000000
interrupts: 00000002
unit-address: '1c,1'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b44
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b44'
Node 0x000013
acpi-namespace: '\_SB_.PCI0.RP02.PXSX'
assigned-addresses: 83020010.00000000.f2c00000.00000000.00002000
reg: 00020000.00000000.00000000.00000000.00000000.03020010.00000000.00000000.00000000.00002000
compatible: 'pciex8086,422c.8086.1321.35' + 'pciex8086,422c.8086.1321' + 'pciex8086,422c.35' + 'pciex8086,422c' + 'pciexclass,028000' + 'pciexclass,0280' + 'pci8086,422c.8086.1321.35' + 'pci8086,422c.8086.1321' + 'pci8086,1321' + 'pci8086,422c.35' + 'pci8086,422c' + 'pciclass,028000' + 'pciclass,0280'
model: 'Network controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00008086
subsystem-id: 00001321
unit-address: '0'
class-code: 00028000
revision-id: 00000035
vendor-id: 00008086
device-id: 0000422c
name: 'pci8086,1321'
Node 0x00000b
acpi-namespace: '\_SB_.PCI0.RP03'
slot-names: 00000001.746f6c53.00000038
reg: 0000e200.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b46.5' + 'pciex8086,3b46' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b46.5' + 'pci8086,3b46' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00003000.81000000.00000000.00003000.00000000.00001000.82000000.00000000.f1800000.82000000.00000000.f1800000.00000000.01400000
bus-range: 00000003.00000003
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000002
devsel-speed: 00000000
interrupts: 00000003
unit-address: '1c,2'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b46
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b46'
Node 0x000014
acpi-namespace: '\_SB_.PCI0.RP03.PXSX'
assigned-addresses: 82030010.00000000.f1830000.00000000.00000100
reg: 00030000.00000000.00000000.00000000.00000000.02030010.00000000.00000000.00000000.00000100
compatible: 'pciex1180,e822.1028.410.1' + 'pciex1180,e822.1028.410' + 'pciex1180,e822.1' + 'pciex1180,e822' + 'pciexclass,080500' + 'pciexclass,0805' + 'pci1180,e822.1028.410.1' + 'pci1180,e822.1028.410' + 'pci1028,410' + 'pci1180,e822.1' + 'pci1180,e822' + 'pciclass,080500' + 'pciclass,0805'
model: 'SD Host controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '0'
class-code: 00080500
revision-id: 00000001
vendor-id: 00001180
device-id: 0000e822
name: 'pci1028,410'
Node 0x00000c
acpi-namespace: '\_SB_.PCI0.RP04'
slot-names: 00000001.746f6c53.00000039
reg: 0000e300.00000000.00000000.00000000.00000000
compatible: 'pciex8086,3b48.5' + 'pciex8086,3b48' + 'pciexclass,060400' + 'pciexclass,0604' + 'pci8086,3b48.5' + 'pci8086,3b48' + 'pciclass,060400' + 'pciclass,0604'
model: 'PCI-PCI bridge'
ranges: 81000000.00000000.00002000.81000000.00000000.00002000.00000000.00001000.82000000.00000000.f0400000.82000000.00000000.f0400000.00000000.01400000
bus-range: 00000004.00000009
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pciex'
power-consumption: 00000001.00000001
physical-slot#: 00000003
devsel-speed: 00000000
interrupts: 00000004
unit-address: '1c,3'
class-code: 00060400
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b48
hotplug-capable:
pci-hotplug-type: 00000001
name: 'pci8086,3b48'
Node 0x00000d
acpi-namespace: '\_SB_.PCI0.EHCI'
assigned-addresses: 8200e810.00000000.f5450000.00000000.00000400
reg: 0000e800.00000000.00000000.00000000.00000000.0200e810.00000000.00000000.00000000.00000400
compatible: 'pci8086,3b34.1028.410.5' + 'pci8086,3b34.1028.410' + 'pci1028,410' + 'pci8086,3b34.5' + 'pci8086,3b34' + 'pciclass,0c0320' + 'pciclass,0c03'
model: 'Universal Serial Bus EHCI compliant'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1d'
class-code: 000c0320
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b34
name: 'pci1028,410'
Node 0x00000e
acpi-namespace: '\_SB_.PCI0.P0P1'
slot-names: 0000002f.746f6c53.6c530031.0032746f.746f6c53.6c530033.0034746f.746f6c53.00000032
reg: 0000f000.00000000.00000000.00000000.00000000
compatible: 'pci8086,2448.a5' + 'pci8086,2448' + 'pciclass,060401' + 'pciclass,0604'
model: 'Subtractive Decode PCI-PCI bridge'
bus-range: 0000000a.0000000a
#size-cells: 00000002
#address-cells: 00000003
device_type: 'pci'
power-consumption: 00000001.00000001
devsel-speed: 00000000
unit-address: '1e'
class-code: 00060401
revision-id: 000000a5
vendor-id: 00008086
device-id: 00002448
name: 'pci8086,2448'
Node 0x00000f
#size-cells: 00000001
#address-cells: 00000002
ranges: 00000001.00000000.81000000.00000000.00000000.00000022.00000001.00000024.81000000.00000000.00000024.00000002.00000001.00000028.81000000.00000000.00000028.00000002.00000001.0000002c.81000000.00000000.0000002c.00000006.00000001.00000034.81000000.00000000.00000034.00000002.00000001.00000038.81000000.00000000.00000038.00000002.00000001.0000003c.81000000.00000000.0000003c.00000002.00000001.00000040.81000000.00000000.00000040.00000004.00000001.0000004e.81000000.00000000.0000004e.00000006.00000001.00000060.81000000.00000000.00000060.00000002.00000001.00000063.81000000.00000000.00000063.00000003.00000001.00000067.81000000.00000000.00000067.00000001.00000001.00000070.81000000.00000000.00000070.00000008.00000001.00000070.81000000.00000000.00000070.00000001.00000001.00000080.81000000.00000000.00000080.00000022.00000001.000000a4.81000000.00000000.000000a4.00000002.00000001.000000a8.81000000.00000000.000000a8.00000002.00000001.000000ac.81000000.00000000.000000ac.00000002.00000001.000000b0.81000000.00000000.000000b0.00000006.00000001.000000b8.81000000.00000000.000000b8.00000002.00000001.000000bc.81000000.00000000.000000bc.00000002.00000001.000000c0.81000000.00000000.000000c0.00000020.00000001.000000f0.81000000.00000000.000000f0.00000001.00000001.00000400.81000000.00000000.00000400.00000080.00000001.000004d0.81000000.00000000.000004d0.00000002.00000001.00000500.81000000.00000000.00000500.00000080.00000001.00000680.81000000.00000000.00000680.00000020.00000001.00000930.81000000.00000000.00000930.00000001.00000001.00000934.81000000.00000000.00000934.00000001.00000001.00000cf8.81000000.00000000.00000cf8.00000008.00000001.00001000.81000000.00000000.00001000.00000014.00000001.0000164e.81000000.00000000.0000164e.00000002.00000001.0000ffff.81000000.00000000.0000ffff.00000001.00000000.f54c0000.82000000.00000000.f54c0000.00001000.00000000.f8000000.82000000.00000000.f8000000.04000000.00000000.fed00000.82000000.00000000.fed00000.00000400.00000000.fed10000.82000000.00000000.fed10000.00004000.00000000.fed18000.82000000.00000000.fed18000.00002000.00000000.fed1c000.82000000.00000000.fed1c000.00024000.00000000.fed45000.82000000.00000000.fed45000.0004b000.00000000.fee00000.82000000.00000000.fee00000.00100000.00000000.ff000000.82000000.00000000.ff000000.01000000.00000000.ff000000.82000000.00000000.ff000000.01000000
acpi-namespace: '\_SB_.PCI0.LPCB'
device_type: 'isa'
reg: 0000f800.00000000.00000000.00000000.00000000
compatible: 'pci8086,3b0f.1028.410.5' + 'pci8086,3b0f.1028.410' + 'pci1028,410' + 'pci8086,3b0f.5' + 'pci8086,3b0f' + 'pciclass,060100' + 'pciclass,0601'
model: 'ISA bridge'
power-consumption: 00000001.00000001
devsel-speed: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f'
class-code: 00060100
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b0f
name: 'isa'
Node 0x00001c
unit-address: '1,60'
interrupts: 00000001.0000000c
reg: 00000001.00000060.00000001.00000001.00000064.00000001
name: 'i8042'
Node 0x00001d
compatible: 'pnpPNP,303'
device-type: 'keyboard'
interrupts: 00000001.0000000c
reg: 00000000
acpi-namespace: '\_SB_.PCI0.LPCB.PS2K'
model: 'System keyboard'
name: 'keyboard'
Node 0x00001e
compatible: 'pnpPNP,f03'
device-type: 'mouse'
reg: 00000001
interrupts: 0000000c
acpi-namespace: '\_SB_.PCI0.LPCB.PS2M'
model: 'PS/2 Port for PS/2-style Mice'
name: 'mouse'
Node 0x00001f
interrupts: 00000004
reg: 00000001.000003f8.00000008
model: 'Standard serial port'
compatible: 'PNP0500'
name: 'asy'
Node 0x000010
acpi-namespace: '\_SB_.PCI0.SAT0'
assigned-addresses: 8100fa10.00000000.00006090.00000000.00000008.8100fa14.00000000.00006080.00000000.00000004.8100fa18.00000000.00006070.00000000.00000008.8100fa1c.00000000.00006060.00000000.00000004.8100fa20.00000000.00006020.00000000.00000020.8200fa24.00000000.f5440000.00000000.00000800
reg: 0000fa00.00000000.00000000.00000000.00000000.0100fa10.00000000.00000000.00000000.00000008.0100fa14.00000000.00000000.00000000.00000004.0100fa18.00000000.00000000.00000000.00000008.0100fa1c.00000000.00000000.00000000.00000004.0100fa20.00000000.00000000.00000000.00000020.0200fa24.00000000.00000000.00000000.00000800
compatible: 'pci8086,3b2f.1028.410.5' + 'pci8086,3b2f.1028.410' + 'pci1028,410' + 'pci8086,3b2f.5' + 'pci8086,3b2f' + 'pciclass,010601' + 'pciclass,0106'
model: 'SATA AHCI 1.0 Interface'
power-consumption: 00000001.00000001
66mhz-capable:
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,2'
class-code: 00010601
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b2f
name: 'pci1028,410'
Node 0x000011
acpi-namespace: '\_SB_.PCI0.SBUS'
assigned-addresses: 8300fb10.00000000.f5430000.00000000.00000100.8100fb20.00000000.00006000.00000000.00000020
reg: 0000fb00.00000000.00000000.00000000.00000000.0300fb10.00000000.00000000.00000000.00000100.0100fb20.00000000.00000000.00000000.00000020
compatible: 'pci8086,3b30.1028.410.5' + 'pci8086,3b30.1028.410' + 'pci1028,410' + 'pci8086,3b30.5' + 'pci8086,3b30' + 'pciclass,0c0500' + 'pciclass,0c05'
model: 'SMBus (System Management Bus)'
power-consumption: 00000001.00000001
fast-back-to-back:
devsel-speed: 00000001
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,3'
class-code: 000c0500
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b30
name: 'pci1028,410'
Node 0x000012
assigned-addresses: 8300fe10.00000000.f5420000.00000000.00001000
reg: 0000fe00.00000000.00000000.00000000.00000000.0300fe10.00000000.00000000.00000000.00001000
compatible: 'pci8086,3b32.1028.410.5' + 'pci8086,3b32.1028.410' + 'pci1028,410' + 'pci8086,3b32.5' + 'pci8086,3b32' + 'pciclass,118000' + 'pciclass,1180'
model: 'DSP/DAP controllers'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000003
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00001028
subsystem-id: 00000410
unit-address: '1f,6'
class-code: 00118000
revision-id: 00000005
vendor-id: 00008086
device-id: 00003b32
name: 'pci1028,410'
Node 0x000015
device_type: 'acpirootnex'
compatible: 'SOLA0001' + 'acpirootnex' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\'
name: 'fw'
Node 0x000016
unit-address: '1'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000000
acpi-processor-id: 00000001
acpi-namespace: '\_PR_.CPU0'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000017
unit-address: '2'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000004
acpi-processor-id: 00000002
acpi-namespace: '\_PR_.CPU1'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000018
unit-address: '3'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000001
acpi-processor-id: 00000003
acpi-namespace: '\_PR_.CPU2'
device_type: 'acpicpu'
name: 'cpu'
Node 0x000019
unit-address: '4'
compatible: 'SOLA0004' + 'acpicpu' + 'cpu'
apic-id: 00000005
acpi-processor-id: 00000004
acpi-namespace: '\_PR_.CPU3'
device_type: 'acpicpu'
name: 'cpu'
Node 0x00001a
unit-address: '0'
compatible: 'acpidevice' + 'SOLA0002' + 'acpivirtnex'
acpi-namespace: '\_SB_'
device_type: 'acpidevice'
name: 'sb'
Node 0x00001b
io-space: 00000000.00000020.00000020.00000002.00000024.00000002.00000028.00000002.0000002c.00000002.0000002e.00000002.00000030.00000002.00000034.00000002.00000038.00000002.0000003c.00000002.00000040.00000004.0000004e.00000002.00000050.00000004.00000060.00000001.00000061.00000001.00000063.00000001.00000064.00000001.00000065.00000001.00000067.00000001.00000070.00000008.00000070.00000001.00000080.00000001.00000081.00000011.00000092.00000001.00000093.0000000d.000000a0.00000002.000000a4.00000002.000000a8.00000002.000000ac.00000002.000000b0.00000002.000000b2.00000002.000000b4.00000002.000000b8.00000002.000000bc.00000002.000000c0.00000020.000000f0.00000001.00000400.00000080.000004d0.00000002.00000500.00000080.00000680.00000020.00000930.00000001.00000934.00000001.00000cf8.00000008.00001000.00000004.00001004.00000010.0000164e.00000002.0000ffff.00000001
device-memory: f54c0000.00001000.f8000000.04000000.fed00000.00000400.fed10000.00004000.fed18000.00001000.fed19000.00001000.fed1c000.00004000.fed20000.00020000.fed45000.0004b000.fee00000.00100000.ff000000.01000000.ff000000.01000000
dma-channels: 00000004
interrupts: 00000000.00000001.00000002.00000008.0000000c.0000000d
name: 'used-resources'
prtdiag:
System Configuration: Dell Inc. Latitude E4310
BIOS Configuration: Dell Inc. A05 11/20/2010
==== Processor Sockets ====================================
Version Location Tag
Intel(R) Core(TM) i5 CPU M 560 @ 2.67GH CPU 1
==== Memory Device Sockets ================================
Type Status Set Device Locator Bank Locator
Unknown in use 0 DIMM_A BANK 0
unknown empty 0 DIMM_B BANK 2
==== On-Board Devices =====================================
"Intel GM45 Graphics"
NETWORK_NAME_STRING
==== Upgradeable Slots ====================================
ID Status Type Description
0 available PCI Express x16 J5C1
1 available PCI Express J6C2
2 in use PCI Express J6D2
3 in use PCI Express J7C1
4 available PCI Express J7D2
System Information:
Manufacturer:Dell Inc.
Product:Latitude E4310
BIOS Information:
Vendor:Dell Inc.
Version:A05
Release Date:11/20/2010
BIOS Revision: BIOS Revision:4.6
Firmware Revision:
MotherBoard Information:
Product:0D8H24
Manufacturer:Dell Inc.
Version:A00
Onboard Devices:[Video,Disabled]"Intel GM45 Graphics"
CPU Information:
Processor 0:
Processor Socket Type:CPU 1
Processor Manufacturer:Intel
Current Voltage:0.0V
External Clock:533MHZ
Max Speed:4000MHZ
Current Speed:2666MHZ
Memory Information:
Physical Memory: 4G (4G)
Maximum Memory Support: 4096G
Memory Subsystem 0:
Array Used Function:System memory
Memory Error Correction Supported:None
Maximum Array Capacity:8G
Number of Memory Devices:2
Memory Device 0:
Memory Device Locator:DIMM_A
Total Width:64
Data Width:64
Installed Size:4096M
Memory Device Type:Unknown
Speed:1067MHZ
Memory Device 1:
[Not Installed]

DNS PRoblem in SOLARIS 9.0

Hi
can any one help me on this
I am facing dns problem in solaris sparc 9.0. I am not able to see
" /etc/named.conf" .If i type in.named -v it is showing BIND version .is it required to install bind seprately.
I downloaded BIND from sunfreeware i tried to compile but it is throghing the error something like "make cannot build" after running "./confiugre"
One more query is it possible to install dns and nis server in same solaris box .
could any one guide me how to setup the DNS server and how to configure
Thanks
SolarisTeam

Hi
Thanks for the reply,
It is working fine with the upgraded version of Weblogic 9.0 from weblogic 8.1. But not with the fresh installation of Weblogic 9.0.
Thanks,
Raj

Content Server 6.0 Installation problem on Solaris

When I installed Content_Server_6.0_SP1_solaris_oracle on Solaris 10 ,I get the following error in log file.
dbg Bundled JRE is not binary compatible with host OS/Arch or it is corrupt. Testing bundled JRE failed.
How can I resolve it
please help me.
Regards
Sandeep

If I installed any installer for sparc Machine on x86.is there any problem.My Solaris machine is x86.
thanx.
Regards
Sandeep.

Focus Problem on Solaris with jdk 1.3.1

Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
     super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
     return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
     if (a == null) return b;
     if (b == null) return a;
     return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
     if (oldl == a) return b;
     if (oldl == b) return a;
     java.util.EventListener a2 = removeInternal(a, oldl);
     java.util.EventListener b2 = removeInternal(b, oldl);
     if (a2 == a && b2 == b)
          return this;
     return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
     if (l == oldl || l == null)
          return null;
     if(l instanceof PenHesapLisEventMulticaster)
          return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
     return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).tamam_actionPerformed(newEvent);
     ((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).iptal_actionPerformed(newEvent);
     ((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
     protected transient PenHesapListener PenhListener = null ;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus2()
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               fireTamam_actionPerformed(e);
     public void addPenHesapListener(PenHesapListener newListener)
          PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
          return;
     protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.tamam_actionPerformed(newEvent);
          this.setVisible(false);
     protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.iptal_actionPerformed(newEvent);
     public static void main(String x[])
          TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
     PenKreKart aPenKreKart = null ;
     Container ctn = null;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JTextField f2 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus()
          //aPenKreKart = new PenKreKart(true);
          //aPenKreKart.aTemelPencere.setVisible(false);
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(f2);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               pencere_islemi();
     // pencere koyma k?sm? .. begin
     public void pencere_islemi() {
          ctn = this;
          ctn.setEnabled(false);
          TestFocus2 fpen = new TestFocus2();
          //aPenKreKart.aTemelPencere.setVisible(true); //buras?
          //aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
          fpen.addPenHesapListener(new PenHesapListener() {
                    // metod      tamam_actionPerformed begin...
                    public void tamam_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         // Problem is when we comment the below line it works .....
                         f1.requestFocus();
                         System.out.println("tamam");
                    // metod      tamam_actionPerformed end...
                    // metod      iptal_actionPerformed begin...
                    public void iptal_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         System.out.println("iptal");
                    // metod      iptal_actionPerformed begin...
     // pencere koyma k?sm? .. end
     public static void main(String x[])
          TestFocus gen01 = new TestFocus();

Hi all,
We are having a focus problem on Solaris. The same code works fine on Windows without any problem.
I am sending the test code and run steps below which you can compile and repeat the problem.
NOTE: When we put a comment on the line "f1.requestFocus();" in TestFocus.java it works OK.
Run Steps :
1. Run TestFocus.class
2. A JFrame appears with 2 text field and a button
3. Try to write something on the text fields. It works OK.
4. Click the button to open a new JFrame
5. A new JFrame opens with a single text field and a button.
6. Click the button to close the second frame
7. You are now on the main JFrame
8. Try to write something on the text fields. It works OK.
9. Repeat the steps 4-7
10. Try to write something on the text fields. You are able to focus and write on the first field. BUT you cannot select or write the second Field!
JAVA SOURCE FILES :
PenHesapListener.java :
public interface PenHesapListener extends java.util.EventListener {
void tamam_actionPerformed(java.util.EventObject newEvent);
void iptal_actionPerformed(java.util.EventObject newEvent);
------PenHesapLisEventMulticaster.java----------------------------------
public class PenHesapLisEventMulticaster extends java.awt.AWTEventMulticaster implements PenHesapListener {
* Constructor to support multicast events.
* @param a java.util.EventListener
* @param b java.util.EventListener
protected PenHesapLisEventMulticaster(java.util.EventListener a, java.util.EventListener b) {
     super(a, b);
* Add new listener to support multicast events.
* @return muhasebe.HesappenListener
* @param a muhasebe.HesappenListener
* @param b muhasebe.HesappenListener
public static PenHesapListener add(PenHesapListener a, PenHesapListener b) {
     return (PenHesapListener)addInternal(a, b);
* Add new listener to support multicast events.
* @return java.util.EventListener
* @param a java.util.EventListener
* @param b java.util.EventListener
protected static java.util.EventListener addInternal(java.util.EventListener a, java.util.EventListener b) {
     if (a == null) return b;
     if (b == null) return a;
     return new PenHesapLisEventMulticaster(a, b);
* @return java.util.EventListener
* @param oldl muhasebe.HesappenListener
protected java.util.EventListener remove(PenHesapListener oldl) {
     if (oldl == a) return b;
     if (oldl == b) return a;
     java.util.EventListener a2 = removeInternal(a, oldl);
     java.util.EventListener b2 = removeInternal(b, oldl);
     if (a2 == a && b2 == b)
          return this;
     return addInternal(a2, b2);
* Remove listener to support multicast events.
* @return muhasebe.HesappenListener
* @param l muhasebe.HesappenListener
* @param oldl muhasebe.HesappenListener
public static PenHesapListener remove(PenHesapListener l, PenHesapListener oldl) {
     if (l == oldl || l == null)
          return null;
     if(l instanceof PenHesapLisEventMulticaster)
          return (PenHesapListener)((PenHesapLisEventMulticaster) l).remove(oldl);
     return l;
public void tamam_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).tamam_actionPerformed(newEvent);
     ((PenHesapListener)b).tamam_actionPerformed(newEvent);
public void iptal_actionPerformed(java.util.EventObject newEvent) {
     ((PenHesapListener)a).iptal_actionPerformed(newEvent);
     ((PenHesapListener)b).iptal_actionPerformed(newEvent);
---------TestFocus2.java-----------------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
public class TestFocus2 extends JFrame implements ActionListener
     protected transient PenHesapListener PenhListener = null ;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus2()
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               fireTamam_actionPerformed(e);
     public void addPenHesapListener(PenHesapListener newListener)
          PenhListener = PenHesapLisEventMulticaster.add(PenhListener, newListener);
          return;
     protected void fireTamam_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.tamam_actionPerformed(newEvent);
          this.setVisible(false);
     protected void fireiptal_actionPerformed(java.util.EventObject newEvent) {
          PenhListener.iptal_actionPerformed(newEvent);
     public static void main(String x[])
          TestFocus2 gen01 = new TestFocus2();
--------TestFocus.java-----------------------------------
import javax.swing.*;
import javax.swing.JOptionPane;
import java.awt.event.WindowAdapter;
import java.awt.event.KeyListener;
import java.awt.event.KeyAdapter;
import java.awt.event.KeyEvent;
import java.awt.event.ActionEvent;
import java.awt.event.WindowEvent;
import java.awt.event.ActionListener;
import java.util.ArrayList;
import java.util.StringTokenizer;
import java.text.SimpleDateFormat;
import java.awt.Dimension;
import java.awt.Toolkit;
import java.awt.Color;
import java.util.Locale;
import java.util.ResourceBundle;
import java.awt.Container;
public class TestFocus extends JFrame implements ActionListener
     PenKreKart aPenKreKart = null ;
     Container ctn = null;
     JTextField f10 = null;
     JButton b10= null ;
     JTextField f1 = new JTextField() ;
     JTextField f2 = new JTextField() ;
     JButton b1 = new JButton() ;
     JFrame f20 = null;
     public TestFocus()
          //aPenKreKart = new PenKreKart(true);
          //aPenKreKart.aTemelPencere.setVisible(false);
          getContentPane().setLayout(new BoxLayout(getContentPane(), BoxLayout.Y_AXIS));
          getContentPane().add(f1);
          getContentPane().add(f2);
          getContentPane().add(b1);
          pack();
          setVisible(true);
          b1.addActionListener(this);
     public void actionPerformed(ActionEvent e)
          if(e.getSource() == b1)
               pencere_islemi();
     // pencere koyma k?sm? .. begin
     public void pencere_islemi() {
          ctn = this;
          ctn.setEnabled(false);
          TestFocus2 fpen = new TestFocus2();
          //aPenKreKart.aTemelPencere.setVisible(true); //buras?
          //aPenKreKart.aTemelPencere.addPenHesapListener(new PenHesapListener() {
          fpen.addPenHesapListener(new PenHesapListener() {
                    // metod      tamam_actionPerformed begin...
                    public void tamam_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         // Problem is when we comment the below line it works .....
                         f1.requestFocus();
                         System.out.println("tamam");
                    // metod      tamam_actionPerformed end...
                    // metod      iptal_actionPerformed begin...
                    public void iptal_actionPerformed(java.util.EventObject newEvent) {
                         ctn.setEnabled(true);
                         ctn.requestFocus();
                         System.out.println("iptal");
                    // metod      iptal_actionPerformed begin...
     // pencere koyma k?sm? .. end
     public static void main(String x[])
          TestFocus gen01 = new TestFocus();

Good afternoon.I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninst

What's error 1 in adobe photoshop elements configuration? I have a computer with W Vista 8, Windows office home and business 2013. I recently tried to install Photoshop Elements by CD with serial number but on the desktop appears the following message: error 1 (configuration problem) try to uninstall and reinstall. I have done this but the message continues to appear

You haven't mentioned which version of PSE. If it is PSE 13, that requires a minimum of windows 7.

Itunes starts but fails to open due to audio configuration problem

Hi
I have been running itunes 7.1 quite successfully until today. Running on windows xp/toshiba laptop.
Problem occurs when i select itunes on desktop, itunes appears on task bar below, after a number of seconds the following error message appears "itunes cannot run because it has detected a problem with your audio configuration", once I click ok on this message itunes terminates.
No changes have been made to my audio configuration (to the best of my knowledge), i can run Windows Media Player and that works fine, so too real player.
I reinstalled itunes, but this did not resolve the problem. I also ran itunes from another logon on my laptop and that presented the same error. I checked all my audio settings in the control panel and also ran the diagnostics on each device and all appears to be fine.
Has anybody faced the same issue, and could anybody advise on any diagnistic tool that could assist in pinpointing the configuration problem?.
Thanks
Toshiba Satellite Windows XP Pro

Hi
Got it resolved, thanks for the prompt responses all!.
Resolved by removal current version of Quicktime thru the control panel (add/remove programs), and then reinstalled from the website.
Phew!
Toshiba Satellite Windows XP Pro

Integration Directory(Configuration) Problem

Hi All,
I am facing one Probelm. I am working one the client through Citrix. I am not able to open Integration Directory(Configuration Problem) . In onsite it's working fine. Reming all other applications(Integartion Repository and SLD and Runtime work bench) are working fine.
if I open Integration Directory i am getting this messge.
<jnlp spec="1.0+" codebase="http://filp55.group.upm-kymmene.com:50100/dir">
    <information>
        <title>Integration Builder</title>
        <vendor>SAP AG</vendor>
        <homepage href="http://www.sap.com" />
        <description type="one-line">Directory</description>
        <description type="short">Directory</description>
        <description type="tooltip">Directory</description>
        <icon hight="64" href="start/graphics/sap6464.gif" type="splash" width="64" />
        <icon hight="32" href="start/graphics/SAP3232.gif" width="32" />
    </information>
    <security>
        <all-permissions />
    </security>
    <resources>
        <j2se version="1.4+" initial-heap-size="32m" max-heap-size="1024m" />
        <jar href="directory/aii_ibdir_client.jar" />
        <jar href="directory/aii_ibdir_core.jar" />
        <jar href="directory/aii_ibdir_sbeans.jar" />
        <jar href="directory/aii_ibdir_rb.jar" />
        <jar href="directory/aii_ib_client.jar" />
        <jar href="directory/aii_ib_core.jar" />
        <jar href="directory/aii_ib_sbeans.jar" />
        <jar href="directory/aii_ib_rb.jar" />
        <jar href="directory/aii_util_icons.jar" />
        <jar href="directory/aii_util_swing.jar" />
        <jar href="directory/aii_util_xml.jar" />
        <jar href="directory/aii_util_xsd.jar" />
        <jar href="directory/aii_utilxi_misc.jar" />
        <jar href="directory/aii_util_rb.jar" />
        <jar href="directory/clientaii_ib_sbeans.jar" />
        <jar href="directory/clientaii_ibdir_sbeans.jar" />
        <jar href="directory/frog.jar" />
        <jar href="directory/focus14.jar" />
        <jar href="directory/sapxmltoolkit.jar" />
        <jar href="directory/jta.jar" />
        <jar href="directory/ejb20.jar" />
        <jar href="directory/exception.jar" />
        <jar href="directory/logging.jar" />
        <jar href="directory/guidgenerator.jar" />
        <jar href="directory/jperflib.jar" />
        <jar href="directory/sapni.jar" />
        <jar href="directory/sapj2eeclient.jar" />
        <property name="sap.theme" value="Streamline" />
        <property name="jnlp.log.initialConfiguration" value="FILE, SIMPLE" />
    <property name="jnlp.com.sap.aii.ib.client.properties" value="com.sap.aii.ib.client., com.sap.aii.ib.core., com.sap.aii.util.xml., com.sap.aii.connect., com.sap.aii.repository.mapping.additionaltypes, com.sap.aii.docu., com.sap.aii.ibrep.core., com.sap.aii.ibdir.core.*" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.connect.landscape.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.cr.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.ib.client.content.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.repository.contextroot" value="rep" /><property name="jnlp.com.sap.aii.ib.client.login.languages" value="EN,DE" /><property name="jnlp.com.sap.aii.connect.directory.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.cr.contextroot" value="sld" /><property name="jnlp.com.sap.aii.connect.rwb.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.directory.contextroot" value="dir" /><property name="jnlp.com.sap.aii.connect.rwb.contextroot" value="rwb" /><property name="jnlp.com.sap.aii.connect.landscape.httpsport" value="@com.sap.aii.server.httpsport.lcr@" /><property name="jnlp.com.sap.aii.connect.repository.rmiport" value="50104" /><property name="jnlp.com.sap.aii.connect.repository.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.cr.httpsport" value="@com.sap.aii.server.httpsport.cr@" /><property name="jnlp.com.sap.aii.connect.repository.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.contextroot" value="run" /><property name="jnlp.com.sap.aii.connect.integrationserver.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.rwb.httpsport" value="@com.sap.aii.connect.rwb.httpsport@" /><property name="jnlp.com.sap.aii.connect.landscape.httpport" value="50000" /><property name="jnlp.com.sap.aii.docu.languages" value="null" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.initialheapsize" value="32m" /><property name="jnlp.com.sap.aii.util.xml.parserFactory" value="com.sap.engine.lib.jaxp.SAXParserFactoryImpl" /><property name="jnlp.com.sap.aii.connect.directory.httpport" value="50100" /><property name="jnlp.com.sap.aii.connect.directory.httpsport" value="@com.sap.aii.server.httpsport.directory@" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpport" value="8001" /><property name="jnlp.com.sap.aii.connect.rwb.name" value="filp55.group.upm-kymmene.com" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.client" value="790" /><property name="jnlp.com.sap.aii.connect.cr.httpport" value="50000" /><property name="jnlp.com.sap.aii.connect.landscape.name" value="filp40.group.upm-kymmene.com" /><property name="jnlp.SAPMYNAME" value="filp55_GTX_01" /><property name="jnlp.com.sap.aii.connect.rwb.httpport" value="50100" /><property name="jnlp.com.sap.aii.docu.url" value="null" /><property name="jnlp.com.sap.aii.ib.client.applicationname.directory" value="sap.com/com.sap.xi.directory/" /><property name="jnlp.com.sap.aii.util.xml.transformerFactory" value="com.sap.engine.lib.jaxp.TransformerFactoryImpl" /><property name="jnlp.com.sap.aii.ib.client.applicationname.repository" value="sap.com/com.sap.xi.repository/" /><property name="jnlp.com.sap.aii.ib.client.login.InitialContextFactory" value="com.sap.engine.services.jndi.InitialContextFactoryImpl" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpport" value="50100" /><property name="jnlp.client" value="true" /><property name="jnlp.com.sap.aii.connect.repository.httpsport" value="@com.sap.aii.server.httpsport.repository@" /><property name="jnlp.com.sap.aii.ib.client.jnlp.j2se.maxheapsize" value="1024m" /><property name="jnlp.com.sap.aii.connect.integrationserver.httpsport" value="@com.sap.aii.connect.integrationserver.httpsport@" /><property name="jnlp.com.sap.aii.connect.integrationbuilder.startpage.url" value="rep/start/index.jsp" /><property name="jnlp.com.sap.aii.connect.integrationserver.r3.httpsport" value="@com.sap.aii.connect.integrationserver.r3.httpsport@" /><property name="jnlp.com.sap.aii.connect.rwb.r3.sysnr" value="01" /><property name="jnlp.com.sap.aii.util.xml.schemaValidator" value="com.sap.engine.lib.schema.validator.SchemaValidator" /><property name="jnlp.rc.release" value="7_00" /><property name="jnlp.rc.applname" value="DIRECTORY" /><property name="jnlp.rc.supportpackage" value="09" /><property name="jnlp.rc.synctime" value="${sync.time}" /></resources>
    <application-desc main-class="com.sap.aii.ibdir.gui.appl.ApplicationImpl">
        <argument>webstart</argument>
    </application-desc>
</jnlp>
Please help me on this..........
Thanks in Advacne.
Regards,
Chandra

Hello,
1)
May be the problem is a network connectivity issue. Do one thing copy the "cahce" folder from some other client PC(which has successfully opened IR and ID) to your client PC. The folder resides in "C:Documents and Settings<yourUserProfile>Application DataSunJavaDeploymentjavaws".
Copy "cache" folder to your client PC under the above path.
/people/shabarish.vijayakumar/blog/2006/02/13/unable-to-open-iresrid-xipipi-71-updated-for-pi-71-support
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1688 [original link is broken] [original link is broken] [original link is broken]
2) Go to http://filp55.group.upm-kymmene.com:50100/rep/
Click on Administration -> Java Web Start -> Java Web Start Administration ->
Try
1. Re-initialization (then try logging)
2. Re-initialization and force-signing (then try logging)
3. Delete lock (then try logging)
Do this for IR and ID tabs.
3) Check can be a firewall issue.
4) Check wether sufficient roles have been assigned -> Tcode -> SU01 -> roles tab. These roles need to be assigned to your username
SAP_BC_AI_LANDSCAPE_DB_RFC
SAP_SLD_CONFIGURATOR
SAP_SLD_DEVELOPER
SAP_XI_BPE_CONFIGURATOR_ABAP
SAP_XI_BPE_MONITOR_ABAP
SAP_XI_DEVELOPER
SAP_XI_DEVELOPER_ABAP
SAP_XI_DEVELOPER_J2EE
SAP_XI_MONITOR
SAP_XI_MONITOR_ABAP
SAP_XI_MONITOR_J2EE
<b>*******************Reward,if found useful</b>
Edited by: BVS on May 7, 2008 3:01 PM

Itunes can't run bc of audio configuration problem

Well I've been using itunes for about 2 years now and just recently i installed the newer version. It was working fine until today when my computer told me ther was some kind of computer error and that i should do a system restore. So i did a restore to about 2 weeks ago which was before i updated my itunes. And then i was getting the message that my itunes was missing files and could not run. So i ran a repair on it and still got the same error. Then I deleted it adn reinstalled and I got the error "Itunes cannot run because it has detected a problem with your audio configuration.
So then I undid the system restore and tried itunes to see if it would work. And I was still getting the same message that itunes cannot run because it has detected a problem with your audio configuration. So then I uninstalled it and reinstalled it and still getting the same message.
Can someone help me out? What problem would it be with my audio configuration? I haven't changed anything. Is there something i can adjust to fix the problem? I'm clueless....

the message is typically produced by a problem with your QuickTime. (itunes uses QuickTime for audio and video playback.)
perhaps let's start with the following document:
iTunes 7 for Windows: iTunes had detected an audio configuration problem
... but if no joy there, try this alternate technique for swapping out your QuickTime:
head into your Add/Remove programs. uninstall QuickTime.
Next, we’ll manually remove any leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?

Audio Configuration problem detected after install

During the download of the new ITunes version I had a major power failure. I went back and completed the download and after the installation I got an error message that ITunes could not be opened due to an audio configuration problem detected. I went to the Apple site and downloaded a new version from scratch and after the install I got the same audio error. Any Suggestions?

Perhaps this Apple KnowledgeBase article will help:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
Hope that helps.
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic, both in the relevant forums, in the User Tips Library and in the Apple Knowledge Base before you post a question.
Regards.

Audio configuration problem in iTunes

I am running iTunes 7.1.1.5 (WinXP). When opening iTunes, I get an error message that there "are problems with your audio configuration." In iTunes support, I followed instructions to remove Quicktime then reinstall as standalone (without iTunes). Same problem persists. I will add that same problem occurred about a month ago, but that time the same steps of removing Quicktime, then reinstalling as standalone corrected the problem. Unfortunately, it recurred.

See if this helps:
iTunes 7 for Windows: iTunes has detected an audio configuration problem
http://docs.info.apple.com/article.html?artnum=304424

Could not start the app due to a configuration problem - Launchpad issue

Hi,
When I try to launch a custom app from Fiori Launchpad I get an error could not start app due to configuration problem. Error 500- Internal Server Error.
App works correctly when I try to execute via URL http://XXX/sap/bc/ui5_ui5/sap/zmyfioriui5_v11.
Screenshot of Chrome debugging and lpd_cust attached.
It seems problem with ResolveLink but unable to conclude.
Any Suggestion how to proceed.
Thanks,
Mayank

Hi Mayank,
Few modifications :
For additional information field : ".component" at the end is not required.
Only keep : SAPUI5.Component=sap.ui.demo.myFiori
Check this screenshot :
Also, please don't keep Semantic object name and application alias as same name i.e. ymyfioriui5_v11. Its very confusing.
If above doesn't solve, please confirm below :
ZXXXLPD is your launchpad role in LPD_CUST tcode.
Please use TRANSACTIONAL instead of transactional (might be case sensitive)
Show your semantic object "ymyfioriui5_v11" created in /UI2/SEMOBJ
Regards,
Tejas

In.ftpd configuration problem on Solaris 10

Similar Messages

Maybe you are looking for